Download or read book National Union Catalog written by and published by . This book was released on 1970 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes entries for maps and atlases.
Download or read book Results of the nationwide urban runoff program written by and published by . This book was released on 1982 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Statistical Methods in Water Resources written by D.R. Helsel and published by Elsevier. This book was released on 1993-03-03 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: Data on water quality and other environmental issues are being collected at an ever-increasing rate. In the past, however, the techniques used by scientists to interpret this data have not progressed as quickly. This is a book of modern statistical methods for analysis of practical problems in water quality and water resources.The last fifteen years have seen major advances in the fields of exploratory data analysis (EDA) and robust statistical methods. The 'real-life' characteristics of environmental data tend to drive analysis towards the use of these methods. These advances are presented in a practical and relevant format. Alternate methods are compared, highlighting the strengths and weaknesses of each as applied to environmental data. Techniques for trend analysis and dealing with water below the detection limit are topics covered, which are of great interest to consultants in water-quality and hydrology, scientists in state, provincial and federal water resources, and geological survey agencies.The practising water resources scientist will find the worked examples using actual field data from case studies of environmental problems, of real value. Exercises at the end of each chapter enable the mechanics of the methodological process to be fully understood, with data sets included on diskette for easy use. The result is a book that is both up-to-date and immediately relevant to ongoing work in the environmental and water sciences.
Download or read book Selected Water Resources Abstracts written by and published by . This book was released on 1987 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Urban Stormwater Management in the United States written by National Research Council and published by National Academies Press. This book was released on 2009-03-17 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapid conversion of land to urban and suburban areas has profoundly altered how water flows during and following storm events, putting higher volumes of water and more pollutants into the nation's rivers, lakes, and estuaries. These changes have degraded water quality and habitat in virtually every urban stream system. The Clean Water Act regulatory framework for addressing sewage and industrial wastes is not well suited to the more difficult problem of stormwater discharges. This book calls for an entirely new permitting structure that would put authority and accountability for stormwater discharges at the municipal level. A number of additional actions, such as conserving natural areas, reducing hard surface cover (e.g., roads and parking lots), and retrofitting urban areas with features that hold and treat stormwater, are recommended.
Download or read book Government Reports Annual Index written by and published by . This book was released on 1983 with total page 1166 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Overcoming Data Scarcity in Earth Science written by Angela Gorgoglione and published by MDPI. This book was released on 2020-05-22 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: heavily Environmental mathematical models represent one of the key aids for scientists to forecast, create, and evaluate complex scenarios. These models rely on the data collected by direct field observations. However, assembly of a functional and comprehensive dataset for any environmental variable is difficult, mainly because of i) the high cost of the monitoring campaigns and ii) the low reliability of measurements (e.g., due to occurrences of equipment malfunctions and/or issues related to equipment location). The lack of a sufficient amount of Earth science data may induce an inadequate representation of the response’s complexity in any environmental system to any type of input/change, both natural and human-induced. In such a case, before undertaking expensive studies to gather and analyze additional data, it is reasonable to first understand what enhancement in estimates of system performance would result if all the available data could be well exploited. Missing data imputation is an important task in cases where it is crucial to use all available data and not discard records with missing values. Different approaches are available to deal with missing data. Traditional statistical data completion methods are used in different domains to deal with single and multiple imputation problems. More recently, machine learning techniques, such as clustering and classification, have been proposed to complete missing data. This book showcases the body of knowledge that is aimed at improving the capacity to exploit the available data to better represent, understand, predict, and manage the behavior of environmental systems at all practical scales.
Download or read book Applied Spatial Data Analysis with R written by Roger S. Bivand and published by Springer Science & Business Media. This book was released on 2013-06-21 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Spatial Data Analysis with R, second edition, is divided into two basic parts, the first presenting R packages, functions, classes and methods for handling spatial data. This part is of interest to users who need to access and visualise spatial data. Data import and export for many file formats for spatial data are covered in detail, as is the interface between R and the open source GRASS GIS and the handling of spatio-temporal data. The second part showcases more specialised kinds of spatial data analysis, including spatial point pattern analysis, interpolation and geostatistics, areal data analysis and disease mapping. The coverage of methods of spatial data analysis ranges from standard techniques to new developments, and the examples used are largely taken from the spatial statistics literature. All the examples can be run using R contributed packages available from the CRAN website, with code and additional data sets from the book's own website. Compared to the first edition, the second edition covers the more systematic approach towards handling spatial data in R, as well as a number of important and widely used CRAN packages that have appeared since the first edition. This book will be of interest to researchers who intend to use R to handle, visualise, and analyse spatial data. It will also be of interest to spatial data analysts who do not use R, but who are interested in practical aspects of implementing software for spatial data analysis. It is a suitable companion book for introductory spatial statistics courses and for applied methods courses in a wide range of subjects using spatial data, including human and physical geography, geographical information science and geoinformatics, the environmental sciences, ecology, public health and disease control, economics, public administration and political science. The book has a website where complete code examples, data sets, and other support material may be found: http://www.asdar-book.org. The authors have taken part in writing and maintaining software for spatial data handling and analysis with R in concert since 2003.
Download or read book Sensitivity Analysis in Practice written by Andrea Saltelli and published by John Wiley & Sons. This book was released on 2004-07-16 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sensitivity analysis should be considered a pre-requisite for statistical model building in any scientific discipline where modelling takes place. For a non-expert, choosing the method of analysis for their model is complex, and depends on a number of factors. This book guides the non-expert through their problem in order to enable them to choose and apply the most appropriate method. It offers a review of the state-of-the-art in sensitivity analysis, and is suitable for a wide range of practitioners. It is focussed on the use of SIMLAB – a widely distributed freely-available sensitivity analysis software package developed by the authors – for solving problems in sensitivity analysis of statistical models. Other key features: Provides an accessible overview of the current most widely used methods for sensitivity analysis. Opens with a detailed worked example to explain the motivation behind the book. Includes a range of examples to help illustrate the concepts discussed. Focuses on implementation of the methods in the software SIMLAB - a freely-available sensitivity analysis software package developed by the authors. Contains a large number of references to sources for further reading. Authored by the leading authorities on sensitivity analysis.
Download or read book Government Reports Announcements written by and published by . This book was released on 1972 with total page 1404 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Foundation Analysis and Design written by Joseph E. Bowles and published by . This book was released on 1997 with total page 1175 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revision of this best-selling text for a junior/senior course in Foundation Analysis and Design now includes an IBM computer disk containing 16 compiled programs together with the data sets used to produce the output sheets, as well as new material on sloping ground, pile and pile group analysis, and procedures for an improved anlysis of lateral piles. Bearing capacity analysis has been substantially revised for footings with horizontal as well as vertical loads. Footing design for overturning now incorporates the use of the same uniform linear pressure concept used in ascertaining the bearing capacity. Increased emphasis is placed on geotextiles for retaining walls and soil nailing.
Download or read book Rainfall Runoff Modelling written by Keith J. Beven and published by John Wiley & Sons. This book was released on 2012-01-30 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rainfall-Runoff Modelling: The Primer, Second Edition is the follow-up of this popular and authoritative text, first published in 2001. The book provides both a primer for the novice and detailed descriptions of techniques for more advanced practitioners, covering rainfall-runoff models and their practical applications. This new edition extends these aims to include additional chapters dealing with prediction in ungauged basins, predicting residence time distributions, predicting the impacts of change and the next generation of hydrological models. Giving a comprehensive summary of available techniques based on established practices and recent research the book offers a thorough and accessible overview of the area. Rainfall-Runoff Modelling: The Primer Second Edition focuses on predicting hydrographs using models based on data and on representations of hydrological process. Dealing with the history of the development of rainfall-runoff models, uncertainty in mode predictions, good and bad practice and ending with a look at how to predict future catchment hydrological responses this book provides an essential underpinning of rainfall-runoff modelling topics. Fully revised and updated version of this highly popular text Suitable for both novices in the area and for more advanced users and developers Written by a leading expert in the field Guide to internet sources for rainfall-runoff modelling software
Download or read book Climate Change and Indigenous Peoples in the United States written by Julie Koppel Maldonado and published by Springer. This book was released on 2014-04-05 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: With a long history and deep connection to the Earth’s resources, indigenous peoples have an intimate understanding and ability to observe the impacts linked to climate change. Traditional ecological knowledge and tribal experience play a key role in developing future scientific solutions for adaptation to the impacts. The book explores climate-related issues for indigenous communities in the United States, including loss of traditional knowledge, forests and ecosystems, food security and traditional foods, as well as water, Arctic sea ice loss, permafrost thaw and relocation. The book also highlights how tribal communities and programs are responding to the changing environments. Fifty authors from tribal communities, academia, government agencies and NGOs contributed to the book. Previously published in Climatic Change, Volume 120, Issue 3, 2013.
Download or read book Watershed Hydrology written by Vijay P. Singh and published by Allied Publishers. This book was released on 2003 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Linear Theory of Hydrologic Systems written by James Dooge and published by . This book was released on 1973 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Comparisons Among Treatment Means in an Analysis of Variance written by Victor Chew and published by . This book was released on 1977 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Combined Sewer Overflows written by United States. Environmental Protection Agency. Office of Wastewater Management and published by . This book was released on 1999 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt:
