Download or read book CIM Computer Integrated Manufacturing written by August-Wilhelm Scheer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern information technology has opened up new possibilities of flexibilization and cost reduction in production. The author defines CIM - Computer Integrated Manufacturing - as a concept for the structuring of industrial enterprises. Manufacturing technologies demand a CIM concept which can be realized through the capabilities of information processing available today. The idea of integrating different areas of CIM, such as production planning and control (PPC), computer aided design (CAD) and computer aided manufacturing (CAM), is explained through operating chains and put into a CIM architecture based on a hierarchy of EDP systems. The stance taken in this book of defining CIM as a total concept for industrial enterprises is increasingly gaining ground. The book does not aim to put the functional details of the individual CIM components (PPC, CAD, CAP and CAM) in the foreground, but rather to emphasize the integration principles for the functional demands of the individual components. This book appeared in the Federal Republic of Germany in 1987, and within one year it had run to three editions. The author contributes to this book not only his scientific knowledge but also his experience as a consultant for implementing CIM concepts.
Download or read book Computer Integrated Manufacturing Iccim 91 Manufacturing Enterprises Of The 21st Century Proceedings Of The International Conference written by B S Lim and published by World Scientific. This book was released on 1991-10-02 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the 21st century, computer integrated manufacturing (CIM) systems will not only be the economic development tools but will also be the essential means of achieving a higher level of flexibility, cohesiveness and performance. CIM systems are beginning to settle into our society and industries, with greater emphasis on the integration of economic, cultural and social aspects together with design, planning, factory automation and artificial intelligent systems.This volume of proceedings brings together 10 keynote and invited speaker addresses, and over 180 papers by practitioners from 28 countries. It documents current research and in-depth studies on the fundamental aspects of advanced CIM systems and their practical applications. The papers fall into 3 main sections: CIM Related Issues; Industrial AI Applications Aspects; and Concurrent Engineering, Advanced Design, Simulation and Flexible Manufacturing Systems.
Download or read book CIM Mechanical Aspects written by Gareth Evans and published by Elsevier. This book was released on 2013-10-22 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: CIM - Mechanical Aspects: State of the Art Report contains different points of view about computer-integrated manufacturing (CIM). This report is organized into three parts: invited papers, analysis, and bibliography. The invited papers part examines various mechanical aspects of CIM. The analysis part assesses the major advances and provides a balanced analysis of the state of the art in CIM. Bibliography compiles the most important published material on the subject of mechanical aspects of CIM.
Download or read book Computer Integrated Manufacturing CIM in Japan written by V. Sandoval and published by Elsevier. This book was released on 2016-07-29 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presented in this book are some of the most relevant aspects of Computer Integrated Manufacturing (CIM) in Japan. The volume compares the development of CIM in the context of Japan as well as that of Europe and the United States. It includes studies of the implemented CIM systems in many companies. In addition, the book contains a study concerning Intelligent Manufacturing Systems (IMS), and the basis for preparation of the so-called Future Generation of Manufacturing Systems (FGMS). This volume gives a better understanding of Japanese competitiveness using advanced technology. People coming from the manufacturing industry, managers, engineers, officials and researchers will find in this book a rich source of material for understanding the crucial elements in technology development, and its actual and future implementation.
Download or read book Computer Integrated Manufacturing written by R. Vio and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conference Theme: "Applications of CIM: Critical Success Factors and Implementation Strategies". With the patronage of Ministero della Universita e della Ricerca Scientifica e Tecnologica and Citta di Torino
Download or read book Software for Computer Control 1986 written by D. Florian and published by Elsevier. This book was released on 2014-05-23 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume studies the advances of software for computers, their development, applications and management. Topics covered include software project management, real time languages and their uses, and computer aided design techniques. The book also discusses how far artificial intelligence is integrated with business and industry to give a complete overview of the role of computer systems today.
Download or read book Computer Integrated Manufacturing written by United States. Army Materiel Command and published by . This book was released on 1988 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings Of 17th All India Manufacturing Technology written by and published by Allied Publishers. This book was released on with total page 746 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computer Integrated Manufacturing written by L. Faria and published by Springer Science & Business Media. This book was released on 2013-12-14 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: The impact of CIM (Computer Integrated Manufacturing) on the competitiveness of industry is nowadays well acknowledged. Significant increases in productivity, reduction of production costs and the ability to modify operations quickly are amongst the gains made when applying CIM technologies. The integration of automation islands and the application of information technology throughout manufacturing and engineering environments constitute key tasks for European industry. ESPRIT (European Strategic Programme for Research and Development in Information Technology) is a pre-competitive industry-oriented collaborative research and development programme in information technology. The programme is managed and co-funded by the European Community and is organised in close liaison with industry, national administ rations and the research Community. ESPRIT has the following three objectives: - To provide the European information technology industry with the basic technologies to meet the competitive requirements of the 1990s; - To promote European industrial cooperation in information technology; - To pave the way for standards. The CIM part of the ESPRIT programme addresses the application of information technology in industrial environments. CIM-Europe is an information and awareness activity of ESPRIT. Its aim is to consolidate and enhance the effects of ESPRIT CIM by disseminating information on progress and achievements in the programme. It stimulates interaction between project teams in CIM and other areas, encouraging the development and the application of CIM techniques to the benefit of European industry. CIM-Europe's main activities are meetings (Study Groups, Workshops and its Annual Conference) and publications (Notices and Proceedings) .
Download or read book Distributed Computer Control Systems 1989 written by L. Motus and published by Elsevier. This book was released on 2014-07-04 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: The focus of the workshop was on recent advances in the theory, applications and techniques for distributed computer control systems. Topics included: tools and methods for inner layers of DCCS; application papers presenting operational DCCS; the infiltration of true real-time or "time critical" concepts and the emergence of artificial intelligence methods in DCCS applications, leading to novel computer architectures being integrated in computer networks. The book will be of interest not only to those involved in DCCS but also software engineers and distributed computing scientists.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1987 with total page 934 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computer Integrated Manufacturing written by Alan Weatherall and published by Butterworth-Heinemann. This book was released on 2013-09-03 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer Integrated Manufacturing: From Fundamentals to Implementation is based on a course in computer integrated manufacturing (CIM) which is part of the Production Engineering Tripos for postgraduate-level students at Cambridge University. The book is intended to provide a thorough coverage of a difficult subject, and to communicate principles as well as something of current practice. This should give a firm basis of knowledge in CIM, and develop an understanding that will be valid for many years in changing business and manufacturing environments. The book covers CIM and manufacturing systems at a technical level, from description of the conventional ""islands of computerization"" to the components of CIM architecture. The business objectives of CIM are described, from analysis of the business environment to cost justification and implementation of CIM systems. CIM is seen as a business tool and not as an end in itself. Each individual and company needs to adapt the tools described in this book to best effect. Study of this book should enable postgraduate students and professional engineers to deal confidently with the subject and use CIM techniques profitably.
Download or read book COMPUTER INTEGRATED MANUFACTURING written by ALAVUDEEN, A. and published by PHI Learning Pvt. Ltd.. This book was released on 2008-08-18 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: This up-to-date and accessible text deals with the basics of Computer Integrated Manufacturing (CIM) and the many advances made in the field. It begins with a discussion on automation systems, and gives the historical background of many of the automation technologies. Then it moves on to describe the various techniques of automation such as group technology and flexible manufacturing systems. The text describes several production techniques, for example, just-in-time (JIT), lean manufacturing and agile manufacturing, besides explaining in detail database systems, machine functions, and design considerations of Numerical Control (NC) and Computer Numerical Control (CNC) machines, and how the CIM system can be modelled. The book concludes with a discussion on the industrial application of artificial intelligence with the help of case studies, in addition to giving network application and signalling approaches. Intended primarily as a text for the undergraduate and graduate students of mechanical, production, and industrial engineering and management, the text should also prove useful for the professionals in the field.
Download or read book 1987 IEEE Workshop on Languages for Automation written by and published by . This book was released on 1987 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Computer integrated Manufacturing written by Arthur L. Foston and published by Pearson. This book was released on 1991 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: M->CREATED
Download or read book Network World written by and published by . This book was released on 1986-07-28 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: For more than 20 years, Network World has been the premier provider of information, intelligence and insight for network and IT executives responsible for the digital nervous systems of large organizations. Readers are responsible for designing, implementing and managing the voice, data and video systems their companies use to support everything from business critical applications to employee collaboration and electronic commerce.
Download or read book The Control Handbook written by William S. Levine and published by CRC Press. This book was released on 1996-02-23 with total page 1580 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the biggest, most comprehensive, and most prestigious compilation of articles on control systems imaginable. Every aspect of control is expertly covered, from the mathematical foundations to applications in robot and manipulator control. Never before has such a massive amount of authoritative, detailed, accurate, and well-organized information been available in a single volume. Absolutely everyone working in any aspect of systems and controls must have this book!
