Download or read book An Introduction to Computer Aided Production Management written by S. Childe and published by Springer Science & Business Media. This book was released on 1996-11-30 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: The control of manufacturing operations is of crucial importance in industry. The correct regulation of manufacturing activities makes the difference between meeting and missing customer requirements. Nowadays computerised solutions are available as an aid to production management. However, many companies proceed to use sophisticated computer tools without first understanding the basic operating principles. This book is written for students of manufacturing systems as well as people in industry who need a concise explanation of the concepts of Computer Aided Production Management (CAPM) or who may be looking for new ideas.
Download or read book Computer Aided Production Management written by Asbjorn Rolstadas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to discuss the state of the art and future trends in the field of computerized production management systems. It is composed of a number of independent papers, each presented in a chapter. Some of the widely recognized experts in the field around the world have been asked to contribute. lowe each of them my sincere gratitude for their kind cooperation. I am also grateful to Peter Falster and Jim Browne for their kind support in helping me to review topics to be covered and to select the authors. This book is a result of the professional work done in the International Federation of Information Processing Technical Committee IFIP TC5 "Com puter Applications in Technology" and especially in the Working Group WG5. 7 "Computer-Aided Production Management". This group was established in 1978 with the aim of promoting and encouraging the advancement of the field of computer systems for the production management of manufacturing, off shore, construction, electronic and similar and related industries. The scope of the work includes, but is not limited to, the following topics: 1) design and implementation of new production planning and control systems taking into account new technology and management philosophy; 2) CAPM in a CIM environment including interfaces to CAD and CAM; 3) project management and cost engineering; 4) knowledge engineering in CAPM; 5) CAPM for Flexible Manufacturing Systems (FMS) and Flexible Assembly Systems (F AS); 6) methods and concepts in CAPM; 7) economic and social implications of CAPM.
Download or read book Computer Aided Production Management written by P. B. Mahapatra and published by PHI Learning Pvt. Ltd.. This book was released on 2004-08-01 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Introduction to Computer Aided Production Management written by Stephen J. [from old catalog] Childe and published by . This book was released on 1997 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computer Aided Design and Manufacturing written by Zhuming Bi and published by John Wiley & Sons. This book was released on 2020-02-04 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: Broad coverage of digital product creation, from design to manufacture and process optimization This book addresses the need to provide up-to-date coverage of current CAD/CAM usage and implementation. It covers, in one source, the entire design-to-manufacture process, reflecting the industry trend to further integrate CAD and CAM into a single, unified process. It also updates the computer aided design theory and methods in modern manufacturing systems and examines the most advanced computer-aided tools used in digital manufacturing. Computer Aided Design and Manufacturing consists of three parts. The first part on Computer Aided Design (CAD) offers the chapters on Geometric Modelling; Knowledge Based Engineering; Platforming Technology; Reverse Engineering; and Motion Simulation. The second part on Computer Aided Manufacturing (CAM) covers Group Technology and Cellular Manufacturing; Computer Aided Fixture Design; Computer Aided Manufacturing; Simulation of Manufacturing Processes; and Computer Aided Design of Tools, Dies and Molds (TDM). The final part includes the chapters on Digital Manufacturing; Additive Manufacturing; and Design for Sustainability. The book is also featured for being uniquely structured to classify and align engineering disciplines and computer aided technologies from the perspective of the design needs in whole product life cycles, utilizing a comprehensive Solidworks package (add-ins, toolbox, and library) to showcase the most critical functionalities of modern computer aided tools, and presenting real-world design projects and case studies so that readers can gain CAD and CAM problem-solving skills upon the CAD/CAM theory. Computer Aided Design and Manufacturing is an ideal textbook for undergraduate and graduate students in mechanical engineering, manufacturing engineering, and industrial engineering. It can also be used as a technical reference for researchers and engineers in mechanical and manufacturing engineering or computer-aided technologies.
Download or read book Computer Aided Process and Product Engineering CAPE written by Luis Puigjaner and published by John Wiley & Sons. This book was released on 2007-01-02 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer aided process engineering (CAPE) tools have been very successfully used in process design and product engineering for a long time. In particular, simulation and modelling tools have enabled engineers to analyse and understand the behaviour of selected processes prior to building actual plants. The aim of design or retrofit of chemical processes is to produce profitably products that satisfy the societal needs, ensuring safe and reliable operation of each process, as well as minimising any effects on the environment. This involves the conceptual design or retrofit of plants and processes, novel manufacturing approaches, process/control system design interactions and operability, manufacturability, environmental and safety issues. Backed by current studies, this 2-volume set gives a comprehensive survey of the various approaches and latest developments on the use of CAPE in the process industry. An invaluable reference to the scientific and industrial community in the field of computer aided process and product engineering.
Download or read book Computer Assisted Management and Control of Manufacturing Systems written by Spyros G. Tzafestas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modem manufacturing systems involve many processes and operations that can be monitored and controlled at several levels of intelligence. At the highest level there is a computer that supervises the various manufacturing functions, whereas at the lowest level there are stand alone computer controlled systems of manufacturing processes and robotic cells. Until recenty computer-aided manufacturing systems constituted isolated "islands" of automation, each oriented to a particular application, but present day systems offer integrated approaches to manufacturing and enterprise operations. These modem systems, known as computer-integrated manufacturing (CIM) systems, can easily meet the current performance and manufacturing competitiveness requirements under strong environmental changes. CIM systems are much of a challenge, and imply a systemic approach to the design and operation of a manufacturing enterprise. Actualy, a CIM system must take into account in a unified way the following three views : the user view, the technology view, and the enterprise view. This means that CIM includes both the engineering and enterprise planning and control activities, as well as the information flow activities across all the stages of the system.
Download or read book CIRP Encyclopedia of Production Engineering written by The International Academy for Produ and published by Springer. This book was released on 2014-04-08 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The CIRP Encyclopedia covers the state-of-art of advanced technologies, methods and models for production, production engineering and logistics. While the technological and operational aspects are in the focus, economical aspects are addressed too. The entries for a wide variety of terms were reviewed by the CIRP-Community, representing the highest standards in research. Thus, the content is not only evaluated internationally on a high scientific level but also reflects very recent developments.
Download or read book CAD CAM Computer Aided Design and Manufacturing written by Groover and published by Pearson Education India. This book was released on 2013 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the authors examine interactive computer graphics and its use in designing industrial robots, computer control of manufacturing processes, computer-integrated production control, automated inspections, and flexible manufacturing systems. They also discuss the implementation of turnkey CAD/CAM systems.
Download or read book Advances in Production Management Systems written by E. Eloranta and published by Elsevier. This book was released on 2012-12-02 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is divided into four sections: invited papers, principles, systems and techniques. The invited papers form an extensive overview of the state-of-the-art of production management. The themes range from the everlasting hunt for better productivity to the implications of CIM architectures (particularly CIM-OSA) for production management. The other three sections of the book look at the various problems affecting production management. One of the characteristics of modern production management is the need for better principles, systems and techniques for interorganizational production management. Another topic of crucial relevance is the necessity to master not only repetitive manufacturing but also one-of-a-kind product manufacturing. From the managerial point of view, the forecast-based make-to-stock principles have proven insufficient, with market forces demanding fast and reliable deliveries of customer-oriented products. The goals of production management have been re-evaluated as a result.
Download or read book Computer Integrated Manufacturing Computer Aided Manufacturing written by Dr. Sushil Kumar Choudhary and published by Walnut Publication. This book was released on 2021-06-18 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is intended for the diploma, undergraduate (B.E, B.Tech), Postgraduate (M.Tech), and Ph.D. students/Research scholars of Mechanical, Automobile, Manufacturing, Production, and Industrial Engineering disciplines. Researchers and practicing engineers will also find this book quite useful. We have tried to make the book as student-friendly as possible. The book can be used in industries, technical training institutes. This book covers the main area of interest in computer integrated manufacturing (CIM) and Computer-aided Manufacturing (CAM) namely Automation, Computer numerical machine (CNC), Industrial Robotics, Flexible manufacturing system (FMS), Group Technology (GT), Artificial Intelligence (AI) manufacturing & Expert systems, Mechatronics, Lean Manufacturing, Just-In-Time (JIT) Manufacturing, Enterprise Resource Planning (ERP) through good sketches and most simple explanations.
Download or read book Computer Aided Manufacturing written by C. Elanchezhian and published by Firewall Media. This book was released on 2007 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computer Aided and Integrated Manufacturing Systems Computer aided design written by Cornelius T. Leondes and published by World Scientific. This book was released on 2003 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an invaluable five-volume reference on the very broad and highly significant subject of computer aided and integrated manufacturing systems. It is a set of distinctly titled and well-harmonized volumes by leading experts on the international scene.The techniques and technologies used in computer aided and integrated manufacturing systems have produced, and will no doubt continue to produce, major annual improvements in productivity, which is defined as the goods and services produced from each hour of work. This publication deals particularly with more effective utilization of labor and capital, especially information technology systems. Together the five volumes treat comprehensively the major techniques and technologies that are involved.
Download or read book CAD Systems in Mechanical and Production Engineering written by Peter Ingham and published by Industrial Press Inc.. This book was released on 1990 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: Uses Autodesk's AutoCAD, Computervision's Personal Designer, and Micro Control Systems' CADKEY as example systems. Requires only elementary mathematics and a basic knowledge of computer hardware devices.
Download or read book Computer Aided Production Engineering written by Hongzan Bin and published by John Wiley & Sons. This book was released on 2001-12-21 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovation in all aspects of mechanical engineering and management Computer Aided Production Engineering is a compilation of papers presented at the 17th International CAPE Conference in 2001. Featuring the work of leading innovators from academia and industry, this book explores the forefront of mechanical engineering technology and practices to provide insight for today and direction for tomorrow. Broad in scope yet rich in detail, these papers cover topics ranging from supply chain management, nontraditional processes, and quality control, to machining processes, concurrent design and engineering, rapid prototyping, virtual reality applications, and much more.
Download or read book A Study of Computer Aided Production Management in UK Batch Manufacturing written by and published by . This book was released on 1987 with total page 57 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Social Shaping of Computer aided Production Management and Computer integrated Manufacture written by Christian Clausen and published by . This book was released on 1997 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:
