Download or read book State Industry University Cooperative Research Centers Symposium written by and published by . This book was released on 1998 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Placement and Routing of Electronic Modules written by Michael Pecht and published by CRC Press. This book was released on 2020-08-26 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical guide presents and compares the fundamental theories and techniques of placement and routing and provides important new approaches to solving specific problems.;Focusing on highly reliable methods for good manufacturing capability, Placement and Routing of Electronic Modules: discusses the mathematical basis for placement and routing, including set, combinatorial and graph theories; explicates the definitions, structures and relationships of tree types and gives methods of finding minimum trees; furnishes useful techniques for placing and routing high-density modules; supplies ways to determine the work-space area needed for placement and routing; shows how to estimate the number of layers necessary to complete routing; explains via minimization to reduce work-space area, facilitate manufacture, and reduce the number of layers; demonstrates a variety of search strategies for paths connecting two nodes on a work space with obstacles; and much more. Containing over 300 illustrative examples, figures and tables that clarify concepts and enhance understanding, Placement and Routing of Electronic Modules should be a useful tool for electrical and electronics, mechanical, reliability, process, and manufacturing engineers; computer scientists; applied mathematicians; and graduate-level students in these disciplines.
Download or read book Reliability Technology written by Norman Pascoe and published by John Wiley & Sons. This book was released on 2011-03-08 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique book that describes the practical processes necessary to achieve failure free equipment performance, for quality and reliability engineers, design, manufacturing process and environmental test engineers. This book studies the essential requirements for successful product life cycle management. It identifies key contributors to failure in product life cycle management and particular emphasis is placed upon the importance of thorough Manufacturing Process Capability reviews for both in-house and outsourced manufacturing strategies. The readers? attention is also drawn to the many hazards to which a new product is exposed from the commencement of manufacture through to end of life disposal. Revolutionary in focus, as it describes how to achieve failure free performance rather than how to predict an acceptable performance failure rate (reliability technology rather than reliability engineering) Author has over 40 years experience in the field, and the text is based on classroom tested notes from the reliability technology course he taught at Massachusetts Institute of Technology (MIT), USA Contains graphical interpretations of mathematical models together with diagrams, tables of physical constants, case studies and unique worked examples
Download or read book Proceedings written by and published by . This book was released on 1997 with total page 1330 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Manufacturing and the Internet written by Richard G. Mathieu and published by Irwin Professional Publishing. This book was released on 1996 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today's rapidly changing marketplace can seem like a jungle for many professionals. Engineering & Management Press offers the books needed to navigate through the wilderness of business techniques and acronyms. EMP's titles provide practical information and proven business methods for most corporate and industrial environments. Our titles cover crucial, timely topics of importance to businesses and managers today -- management, productivity improvement, quality, and related issues.Manufacturing And The Internet is for anyone involved in the study or practice of manufacturing interested in using the Internet as a resource. Readers will learn how to access information on all aspects of manufacturing: computer integrated manufacturing, agile manufacturing, manufacturing strategy, total quality management, statistical quality control, robotics, production scheduling, CAD/CAM, concurrent engineering, and business process engineering.This book provides manufacturing professionals with the information they need for decision-making, as well as tips and suggestions for improving Internet effectiveness. Shortcuts and helpful hints in special sections help both novices and pros alike with enhanced Internet navigation.
Download or read book Reliability and Physics of Healthy in Mechatronics written by Abdelkhalak El Hami and published by John Wiley & Sons. This book was released on 2022-12-09 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book illustrates simply, but with many details, the state of the art of reliability science, exploring clear reliability disciplines and applications through concrete examples from their industries and from real life, based on industrial experiences. Many experts believe that reliability is not only a matter of statistics but is a multidisciplinary scientific topic, involving materials, tests, simulations, quality tools, manufacturing, electronics, mechatronics, environmental engineering and Big Data, among others. For a complex mechatronic system, failure risks have to be identified at an early stage of the design. In the automotive and aeronautic industries, fatigue simulation is used both widely and efficiently. Problems arise from the variability of inputs such as fatigue parameters and life curves. This book aims to discuss probabilistic fatigue and reliability simulation. To do this, Reliability and Physics-of-Healthy in Mechatronics provides a study on some concepts of a predictive reliability model of microelectronics, with examples from the automotive, aeronautic and space industries, based on entropy and Physics-of-Healthy.
Download or read book Proceedings of the First SAE Aerospace Manufacturing Technology Conference written by Society of Automotive Engineers and published by . This book was released on 1997 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following the conference theme "affordable manufacturing solutions for the 21st century," contents include: laser positioning system for advanced composites lay-up, delta III payload fairing; characterization of flow front in resin transfer molding; optical layup template; modeling and assessment of machine tool dynamics and accuracy; the role of castings in part consolidation; automated assembly of large products; automation of the space shuttle solid rocket motor assembly process; evolution to lean manufacturing: a case study of Boeing of Spokane; and advances in real-time monitoring of acoustic emissions.
Download or read book IEEE Circuits Devices written by and published by . This book was released on 1994 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electrical Electronics Abstracts written by and published by . This book was released on 1997 with total page 2240 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Annual Index abstracts of SAE Technical Papers written by and published by . This book was released on 1999 with total page 884 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Technical Literature Abstracts written by Society of Automotive Engineers and published by . This book was released on 2000 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Communications in Reliability Maintainability and Supportability written by and published by . This book was released on 1994 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book AGARD Conference Proceedings written by North Atlantic Treaty Organization. Advisory Group for Aerospace Research and Development and published by . This book was released on 1994 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plastic Encapsulated Microelectronics written by Michael Pecht and published by Wiley-Interscience. This book was released on 1995-02-20 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until now, professionals in search of detailed information about the latest developments in PEM design and production have had to waste valuable time browsing through countless professional journals, monographs, and databases.
Download or read book Strategies to the Prediction Mitigation and Management of Product Obsolescence written by Bjoern Bartels and published by John Wiley & Sons. This book was released on 2012-04-04 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supply chains for electronic products are primarily driven by consumer electronics. Every year new mobile phones, computers and gaming consoles are introduced, driving the continued applicability of Moore's law. The semiconductor manufacturing industry is highly dynamic and releases new, better and cheaper products day by day. But what happens to long-field life products like airplanes or ships, which need the same components for decades? How do electronic and also non-electronic systems that need to be manufactured and supported of decades manage to continue operation using parts that were available for a few years at most? This book attempts to answer these questions. This is the only book on the market that covers obsolescence forecasting methodologies, including forecasting tactics for hardware and software that enable cost-effective proactive product life-cycle management. This book describes how to implement a comprehensive obsolescence management system within diverse companies. Strategies to the Prediction, Mitigation and Management of Product Obsolescence is a must-have work for all professionals in product/project management, sustainment engineering and purchasing.
Download or read book Influence of Temperature on Microelectronics and System Reliability written by Pradeep Lall and published by CRC Press. This book was released on 2020-07-09 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book raises the level of understanding of thermal design criteria. It provides the design team with sufficient knowledge to help them evaluate device architecture trade-offs and the effects of operating temperatures. The author provides readers a sound scientific basis for system operation at realistic steady state temperatures without reliability penalties. Higher temperature performance than is commonly recommended is shown to be cost effective in production for life cycle costs. The microelectronic package considered in the book is assumed to consist of a semiconductor device with first-level interconnects that may be wirebonds, flip-chip, or tape automated bonds; die attach; substrate; substrate attach; case; lid; lid seal; and lead seal. The temperature effects on electrical parameters of both bipolar and MOSFET devices are discussed, and models quantifying the temperature effects on package elements are identified. Temperature-related models have been used to derive derating criteria for determining the maximum and minimum allowable temperature stresses for a given microelectronic package architecture. The first chapter outlines problems with some of the current modeling strategies. The next two chapters present microelectronic device failure mechanisms in terms of their dependence on steady state temperature, temperature cycle, temperature gradient, and rate of change of temperature at the chip and package level. Physics-of-failure based models used to characterize these failure mechanisms are identified and the variabilities in temperature dependence of each of the failure mechanisms are characterized. Chapters 4 and 5 describe the effects of temperature on the performance characteristics of MOS and bipolar devices. Chapter 6 discusses using high-temperature stress screens, including burn-in, for high-reliability applications. The burn-in conditions used by some manufacturers are examined and a physics-of-failure approach is described. The
Download or read book Automatic Sprinkler Standpipe Systems written by John L. Bryan and published by National Fire Protection Association (NFPA). This book was released on 1976 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt:
