Download or read book Computer aided Engineering of Semiconductor Integrated Circuits written by K. C. Saraswat and published by . This book was released on 1979 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objectives of this program are to remove the empiricism associated with the design and manufacturing of custom integrated circuits for military applications and to reduce the cost of these circuits by devising improved computer-aided engineering techniques. Efforts of research covered by this report are in the areas of (1) ion implantation and diffusion of dopants, (2) thermal oxidation, (3) chemical vapor deposition of silicon, and (4) device simulation and statistical circuit modeling. (Author).

Download or read book Computer aided engineering of semiconductor integrated circuits written by David P. Kennedy and published by . This book was released on 1976 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objectives of this program are to remove the empiricism associated with the design and manufacturing of custom integrated circuits and to reduce the cost of these circuits by devising improved computer-aided engineering techniques. During this period emphasis has been placed on integrated circuit device and process modeling. For device modeling the results presented include the: (1) development of two-dimensional model for MOS and bipolar transistors; (2) development of a one-dimensional mathematical model for MOSFET operation; (3) studies on equivalent circuit modeling of transistor operation; (4) theoretical investigations of carrier mobility in the inversion layer of an MOSFET; (5) mathematical investigations for high-speed analysis of devices; (6) sheet resistivity test pattern model development, using Monte-Carlo techniques; and (7) hot carrier studies for inhomogeneous semiconductor material. For process modeling the results presented include (1) ion implantation; (2) thermal oxidation and chemical vapor deposition; (3) silicon epitaxy; and (4) thermal diffusion. (Author).

Download or read book Computer Aided Engineering of Semiconductor Integrated Circuits written by Stanford Electronics Laboratory and published by . This book was released on 1977 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objectives of this program are to remove the empiricism associated with the design and manufacturing of custom integrated circuits for military applications and to reduce the cost of these circuits by devising improved computer-aided engineering techniques. Efforts of research covered by this report are in the areas of (1) ion implantation and diffusion of dopants, (2) thermal oxidation, (3) chemical vapor deposition of silicon, and (4) device simulation and statistical circuit modeling. (Author).

Download or read book Computer Aided Design of Integrated Circuit Fabrication Processes for VLSI Very Large Scale Integration Devices Computer Aided Engineering of Semiconductor Integrated Circuits written by A. Akinwande and published by . This book was released on 1983 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: Efficient design of high performance VLSI process requires accurate models for the physical processes used for fabrication. This is particularly true as device geometries shrink and fabrication technologies become inherently 2D. First order models for thermal oxidation, ion implantation, diffusion, chemical vapor deposition and other processes cannot accurately predict device structures from modern IC technologies. The fundamental objective of this program is to develop accurate and physically correct models for these processes which are general enough to incorporate in a general purpose, user-oriented computer simulation tool - SUPREM. This program accepts process schedules as inputs and provides predicted device structures as outputs. It is meant to be capable of accurately simulating both bipolar and MOS VLSI structures. SUPREM is specifically designed to couple with device simulation tools so that it forms the cornerstone of a hierarchy of VLSI process, device, circuit and system design aids. (Author).

Download or read book Computer Aided Design and VLSI Device Development written by Kit Man Cham and published by Springer. This book was released on 2013-12-19 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is concerned with the use of Computer-Aided Design (CAD) in the device and process development of Very-Large-Scale-Integrated Circuits (VLSI). The emphasis is in Metal-Oxide-Semiconductor (MOS) technology. State-of-the-art device and process development are presented. This book is intended as a reference for engineers involved in VLSI develop ment who have to solve many device and process problems. CAD specialists will also find this book useful since it discusses the organization of the simula tion system, and also presents many case studies where the user applies the CAD tools in different situations. This book is also intended as a text or reference for graduate students in the field of integrated circuit fabrication. Major areas of device physics and processing are described and illustrated with Simulations. The material in this book is a result of several years of work on the implemen tation of the simulation system, the refinement of physical models in the simulation programs, and the application of the programs to many cases of device developments. The text began as publications in journals and con ference proceedings, as weil as lecture notes for a Hewlett-Packard internal CAD course. This book consists of two parts. It begins with an overview of the status of CAD in VLSI, which pointsout why CAD is essential in VLSI development. Part A presents the organization of the two-dimensional simulation system.

Download or read book Integrated Circuit Manufacturability written by José Pineda de Gyvez and published by John Wiley & Sons. This book was released on 1998-10-30 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: "INTEGRATED CIRCUIT MANUFACTURABILITY provides comprehensive coverage of the process and design variables that determine the ease and feasibility of fabrication (or manufacturability) of contemporary VLSI systems and circuits. This book progresses from semiconductor processing to electrical design to system architecture. The material provides a theoretical background as well as case studies, examining the entire design for the manufacturing path from circuit to silicon. Each chapter includes tutorial and practical applications coverage. INTEGRATED CIRCUIT MANUFACTURABILITY illustrates the implications of manufacturability at every level of abstraction, including the effects of defects on the layout, their mapping to electrical faults, and the corresponding approaches to detect such faults. The reader will be introduced to key practical issues normally applied in industry and usually required by quality, product, and design engineering departments in today's design practices: * Yield management strategies * Effects of spot defects * Inductive fault analysis and testing * Fault-tolerant architectures and MCM testing strategies. This book will serve design and product engineers both from academia and industry. It can also be used as a reference or textbook for introductory graduate-level courses on manufacturing."

Download or read book Computer Aided Design of Analog Integrated Circuits and Systems written by Rob A. Rutenbar and published by John Wiley & Sons. This book was released on 2002-05-06 with total page 773 pages. Available in PDF, EPUB and Kindle. Book excerpt: The tools and techniques you need to break the analog design bottleneck! Ten years ago, analog seemed to be a dead-end technology. Today, System-on-Chip (SoC) designs are increasingly mixed-signal designs. With the advent of application-specific integrated circuits (ASIC) technologies that can integrate both analog and digital functions on a single chip, analog has become more crucial than ever to the design process. Today, designers are moving beyond hand-crafted, one-transistor-at-a-time methods. They are using new circuit and physical synthesis tools to design practical analog circuits; new modeling and analysis tools to allow rapid exploration of system level alternatives; and new simulation tools to provide accurate answers for analog circuit behaviors and interactions that were considered impossible to handle only a few years ago. To give circuit designers and CAD professionals a better understanding of the history and the current state of the art in the field, this volume collects in one place the essential set of analog CAD papers that form the foundation of today's new analog design automation tools. Areas covered are: * Analog synthesis * Symbolic analysis * Analog layout * Analog modeling and analysis * Specialized analog simulation * Circuit centering and yield optimization * Circuit testing Computer-Aided Design of Analog Integrated Circuits and Systems is the cutting-edge reference that will be an invaluable resource for every semiconductor circuit designer and CAD professional who hopes to break the analog design bottleneck.

Download or read book Technology Computer Aided Design for Si SiGe and GaAs Integrated Circuits written by G.A. Armstrong and published by IET. This book was released on 2007-11-30 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book to deal with a broad spectrum of process and device design, and modeling issues related to semiconductor devices, bridging the gap between device modelling and process design using TCAD. Presents a comprehensive perspective of emerging fields and covers topics ranging from materials to fabrication, devices, modelling and applications. Aimed at research-and-development engineers and scientists involved in microelectronics technology and device design via Technology CAD, and TCAD engineers and developers.

Download or read book Computer Aided Electronic Engineering written by W. Patrick O'Reilly and published by John Wiley & Sons. This book was released on 1986 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Introducing Technology Computer Aided Design TCAD written by Chinmay K. Maiti and published by CRC Press. This book was released on 2017-03-16 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: This might be the first book that deals mostly with the 3D technology computer-aided design (TCAD) simulations of major state-of-the-art stress- and strain-engineered advanced semiconductor devices: MOSFETs, BJTs, HBTs, nonclassical MOS devices, finFETs, silicon-germanium hetero-FETs, solar cells, power devices, and memory devices. The book focuses on how to set up 3D TCAD simulation tools, from mask layout to process and device simulation, including design for manufacturing (DFM), and from device modeling to SPICE parameter extraction. The book also offers an innovative and new approach to teaching the fundamentals of semiconductor process and device design using advanced TCAD simulations of various semiconductor structures. The simulation examples chosen are from the most popular devices in use today and provide useful technology and device physics insights. To extend the role of TCAD in today’s advanced technology era, process compact modeling and DFM issues have been included for design–technology interface generation. Unique in approach, this book provides an integrated view of silicon technology and beyond—with emphasis on TCAD simulations. It is the first book to provide a web-based online laboratory for semiconductor device characterization and SPICE parameter extraction. It describes not only the manufacturing practice associated with the technologies used but also the underlying scientific basis for those technologies. Written from an engineering standpoint, this book provides the process design and simulation background needed to understand new and future technology development, process modeling, and design of nanoscale transistors. The book also advances the understanding and knowledge of modern IC design via TCAD, improves the quality in micro- and nanoelectronics R&D, and supports the training of semiconductor specialists. It is intended as a textbook or reference for graduate students in the field of semiconductor fabrication and as a reference for engineers involved in VLSI technology development who have to solve device and process problems. CAD specialists will also find this book useful since it discusses the organization of the simulation system, in addition to presenting many case studies where the user applies TCAD tools in different situations.

Download or read book EDA for IC Implementation Circuit Design and Process Technology written by Luciano Lavagno and published by CRC Press. This book was released on 2018-10-03 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting a comprehensive overview of the design automation algorithms, tools, and methodologies used to design integrated circuits, the Electronic Design Automation for Integrated Circuits Handbook is available in two volumes. The second volume, EDA for IC Implementation, Circuit Design, and Process Technology, thoroughly examines real-time logic to GDSII (a file format used to transfer data of semiconductor physical layout), analog/mixed signal design, physical verification, and technology CAD (TCAD). Chapters contributed by leading experts authoritatively discuss design for manufacturability at the nanoscale, power supply network design and analysis, design modeling, and much more. Save on the complete set.

Download or read book Computer aided Integrated Circuit Design written by Gerald J. Herskowitz and published by . This book was released on 1968 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Computer aided Design of Optoelectronic Integrated Circuits and Systems written by James J. Morikuni and published by SPIE-International Society for Optical Engineering. This book was released on 1997 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Illustrates the use of several modeling and simulation techniques for optoelectronic circuit and system design analysis, intended to address the general lack of advanced modeling and simulation infrastructure currently available. Topics range from a review of conventional electronic circuit simulati

Download or read book Design of Electronic Circuits and Computer Aided Design written by M. M. Shah and published by New Age International. This book was released on 1993 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Book Is In Two Parts For Better Presentation Of The Subject. It Covers Analysis And Design Of A Wide Range Of Electronic Circuits, Which Will Be Useful To A Whole Spectrum Of Readers; From Hobbyists To Professional Engineers. The Book Will Be Notably Useful For The Engineering Students For Diploma As Well As Degree Grades.The Topics Covered Are Unregulated Supplies, Zener Voltage Regulators, Transistorised Voltage Supplies, Controlled Rectifiers, Voltage Amplifiers, Power Amplifiers And Multivibrators. In Part Ii Of This Book, Emphasis Has Been Given To The Computer-Aided Design Of The Above Circuits. It Covers Network Analysis, Device Modeling And Study Of Some Of The Popular Circuits And Their Computer-Aided Design. A Clear And Precise Logistics Is Developed And Presented With Functional Programmes Which Should Help The Readers To Formulate Their Own Programme For The Oft-Repeated Design Problems.

Download or read book Microtransducer CAD written by Arokia Nathan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer-aided-design (CAD) of semiconductor microtransducers is relatively new in contrast to their counterparts in the integrated circuit world. Integrated silicon microtransducers are realized using microfabrication techniques similar to those for standard integrated circuits (ICs). Unlike IC devices, however, microtransducers must interact with their environment, so their numerical simulation is considerably more complex. While the design of ICs aims at suppressing "parasitic” effects, microtransducers thrive on optimizing the one or the other such effect. The challenging quest for physical models and simulation tools enabling microtransducer CAD is the topic of this book. The book is intended as a text for graduate students in Electrical Engineering and Physics and as a reference for CAD engineers in the microsystems industry.

Download or read book VLSI Physical Design From Graph Partitioning to Timing Closure written by Andrew B. Kahng and published by Springer Nature. This book was released on 2022-06-14 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: The complexity of modern chip design requires extensive use of specialized software throughout the process. To achieve the best results, a user of this software needs a high-level understanding of the underlying mathematical models and algorithms. In addition, a developer of such software must have a keen understanding of relevant computer science aspects, including algorithmic performance bottlenecks and how various algorithms operate and interact. This book introduces and compares the fundamental algorithms that are used during the IC physical design phase, wherein a geometric chip layout is produced starting from an abstract circuit design. This updated second edition includes recent advancements in the state-of-the-art of physical design, and builds upon foundational coverage of essential and fundamental techniques. Numerous examples and tasks with solutions increase the clarity of presentation and facilitate deeper understanding. A comprehensive set of slides is available on the Internet for each chapter, simplifying use of the book in instructional settings. “This improved, second edition of the book will continue to serve the EDA and design community well. It is a foundational text and reference for the next generation of professionals who will be called on to continue the advancement of our chip design tools and design the most advanced micro-electronics.” Dr. Leon Stok, Vice President, Electronic Design Automation, IBM Systems Group “This is the book I wish I had when I taught EDA in the past, and the one I’m using from now on.” Dr. Louis K. Scheffer, Howard Hughes Medical Institute “I would happily use this book when teaching Physical Design. I know of no other work that’s as comprehensive and up-to-date, with algorithmic focus and clear pseudocode for the key algorithms. The book is beautifully designed!” Prof. John P. Hayes, University of Michigan “The entire field of electronic design automation owes the authors a great debt for providing a single coherent source on physical design that is clear and tutorial in nature, while providing details on key state-of-the-art topics such as timing closure.” Prof. Kurt Keutzer, University of California, Berkeley “An excellent balance of the basics and more advanced concepts, presented by top experts in the field.” Prof. Sachin Sapatnekar, University of Minnesota

Download or read book Electronic Design Automation for IC Implementation Circuit Design and Process Technology written by Luciano Lavagno and published by CRC Press. This book was released on 2017-02-03 with total page 893 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second of two volumes in the Electronic Design Automation for Integrated Circuits Handbook, Second Edition, Electronic Design Automation for IC Implementation, Circuit Design, and Process Technology thoroughly examines real-time logic (RTL) to GDSII (a file format used to transfer data of semiconductor physical layout) design flow, analog/mixed signal design, physical verification, and technology computer-aided design (TCAD). Chapters contributed by leading experts authoritatively discuss design for manufacturability (DFM) at the nanoscale, power supply network design and analysis, design modeling, and much more. New to This Edition: Major updates appearing in the initial phases of the design flow, where the level of abstraction keeps rising to support more functionality with lower non-recurring engineering (NRE) costs Significant revisions reflected in the final phases of the design flow, where the complexity due to smaller and smaller geometries is compounded by the slow progress of shorter wavelength lithography New coverage of cutting-edge applications and approaches realized in the decade since publication of the previous edition—these are illustrated by new chapters on 3D circuit integration and clock design Offering improved depth and modernity, Electronic Design Automation for IC Implementation, Circuit Design, and Process Technology provides a valuable, state-of-the-art reference for electronic design automation (EDA) students, researchers, and professionals.