Download or read book Computational Thermodynamic Study to Predict Complex Phase Equilibria in the Nickel Base Superalloy Rene written by National Aeronautics and Space Adm Nasa and published by Independently Published. This book was released on 2018-09-19 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: A previous study by Ritzert et al. on the formation and prediction of topologically closed packed (TCP) phases in the nickel-base superalloy Rene' N6 is re-examined with computational thermodynamics. The experimental data on phase distribution in forty-four alloys with a composition within the patent limits of the nickel-base superalloy Rene' N6 provide a good basis for comparison to and validation of a commercial nickel superalloy database used with ThermoCalc. Volume fraction of the phases and partitioning of the elements are determined for the forty-four alloys in this dataset. The baseline heat treatment of 400 h at 1366 K was used. This composition set is particularly interesting since small composition differences lead to dramatic changes in phase composition. In general the calculated values follow the experimental trends. However, the calculations indicated no TCP phase formation when the experimental measurements gave a volume percent of TCP phase less than 2 percent. When TCP phases were predicted, the calculations under-predict the volume percent of TCP phases by a factor of 2 to 8. The calculated compositions of the gamma and gamma' phases show fair agreement with the measurements. However, the calculated compositions of the P Phase do not agree with those measured. This may be due to inaccuracies in the model parameters for P phase and/or issues with the microprobe analyses of these phases. In addition, phase fraction diagrams and sigma and P phase solvus temperatures are calculated for each of the alloys. These calculations indicate that P phase is the primary TCP phase formed for the alloys considered here at 1366 K. Finally, a series of isopleths are calculated for each of the seven alloying elements. These show the effect of each alloying element on creating TCP phases.Copland, Evan H. and Jacobson, Nathan S. and Ritzert, Frank J.Glenn Research CenterTHERMODYNAMICS; COMPUTATION; EQUILIBRIUM; NICKEL ALLOYS; DATA BASES; TRENDS; PHASE DIAGRAMS; MICROAN
Download or read book Computational Thermodynamic Study to Predict Complex Phase Equilibria in the Nickel Base Superalloy Rene N6 written by and published by . This book was released on 2001 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book THERMEC 2011 written by Tara Chandra and published by . This book was released on 2012 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Phase Diagrams written by Flake C. Campbell and published by ASM International. This book was released on 2012-01-01 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: This well-written text is for non-metallurgists and anyone seeking a quick refresher on an essential tool of modern metallurgy. The basic principles, construction, interpretation, and use of alloy phase diagrams are clearly described with ample illustrations for all important liquid and solid reactions. Gas-metal reactions, important in metals processing and in-service corrosion, also are discussed. Get the basics on how phase diagrams help predict and interpret the changes in the structure of alloys.
Download or read book The Superalloys written by Roger C. Reed and published by Cambridge University Press. This book was released on 2008-07-31 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superalloys are unique high-temperature materials used in gas turbine engines, which display excellent resistance to mechanical and chemical degradation. This book introduces the metallurgical principles which have guided their development. Suitable for graduate students and researchers, it includes exercises and additional resources at www.cambridge.org/9780521859042.
Download or read book NASA Glenn Coefficients for Calculating Thermodynamic Properties of Individual Species written by Bonnie J. McBride and published by . This book was released on 2002 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Superalloys 2020 written by Sammy Tin and published by Springer Nature. This book was released on 2020-08-28 with total page 1098 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 14th International Symposium on Superalloys (Superalloys 2020) highlights technologies for lifecycle improvement of superalloys. In addition to the traditional focus areas of alloy development, processing, mechanical behavior, coatings, and environmental effects, this volume includes contributions from academia, supply chain, and product-user members of the superalloy community that highlight technologies that contribute to improving manufacturability, affordability, life prediction, and performance of superalloys.
Download or read book Computational Thermodynamics of Materials written by Zi-Kui Liu and published by Cambridge University Press. This book was released on 2016-06-30 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrates fundamental concepts with experimental data and practical applications, including worked examples and end-of-chapter problems.
Download or read book Superalloys 2012 written by Eric S. Huron and published by John Wiley & Sons. This book was released on 2012-10-02 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: A superalloy, or high-performance alloy, is an alloy that exhibits excellent mechanical strength at high temperatures. Superalloy development has been driven primarily by the aerospace and power industries. This compilation of papers from the Twelfth International Symposium on Superalloys, held from September 9-13, 2012, offers the most recent technical information on this class of materials.
Download or read book Welding Metallurgy and Weldability of Nickel Base Alloys written by John C. Lippold and published by John Wiley & Sons. This book was released on 2011-09-20 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most up-to-date coverage of welding metallurgy aspects and weldability issues associated with Ni-base alloys Welding Metallurgy and Weldability of Nickel-Base Alloys describes the fundamental metallurgical principles that control the microstructure and properties of welded Ni-base alloys. It serves as a practical how-to guide that enables engineers to select the proper alloys, filler metals, heat treatments, and welding conditions to ensure that failures are avoided during fabrication and service. Chapter coverage includes: Alloying additions, phase diagrams, and phase stability Solid-solution strengthened Ni-base alloys Precipitation strengthened Ni-base alloys Oxide dispersion strengthened alloys and nickel aluminides Repair welding of Ni-base alloys Dissimilar welding Weldability testing High-chromium alloys used in nuclear power applications With its excellent balance between the fundamentals and practical problem solving, the book serves as an ideal reference for scientists, engineers, and technicians, as well as a textbook for undergraduate and graduate courses in welding metallurgy.
Download or read book Metals Abstracts written by and published by . This book was released on 1992 with total page 1796 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Complex Inorganic Solids written by Patrice E. A. Turchi and published by Springer Science & Business Media. This book was released on 2007-12-31 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the key aspects of this volume is to cut across the traditional taxonomy of disciplines in the study of alloys. Hence there has been a deliberate attempt to integrate the different approaches taken towards alloys as a class of materials in different fields, ranging from geology to metallurgical engineering. The emphasis of this book is to highlight commonalities between different fields with respect to how alloys are studied. The topics in this book fall into several themes, which suggest a number of different classification schemes. We have chosen a scheme that classifies the papers in the volume into the categories Microstructural Considerations, Ordering, Kinetics and Diffusion, Magnetic Considerations and Elastic Considerations. The book has juxtaposed apparently disparate approaches to similar physical processes, in the hope of revealing a more dynamic character of the processes under consideration. This monograph will invigorate new kinds of discussion and reveal challenges and new avenues to the description and prediction of properties of materials in the solid state and the conditions that produce them.
Download or read book Superalloys written by Matthew J. Donachie and published by ASM International. This book was released on 2002 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers virtually all technical aspects related to the selection, processing, use, and analysis of superalloys. The text of this new second edition has been completely revised and expanded with many new figures and tables added. In developing this new edition, the focus has been on providing comprehensive and practical coverage of superalloys technology. Some highlights include the most complete and up-to-date presentation available on alloy melting. Coverage of alloy selection provides many tips and guidelines that the reader can use in identifying an appropriate alloy for a specific application. The relation of properties and microstructure is covered in more detail than in previous books.
Download or read book TMS 2018 147th Annual Meeting Exhibition Supplemental Proceedings written by The Minerals, Metals & Materials Society and published by Springer. This book was released on 2018-02-03 with total page 961 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection features papers presented at the 147th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society.
Download or read book Proceedings of the 9th International Symposium on Superalloy 718 Derivatives Energy Aerospace and Industrial Applications written by Eric Ott and published by Springer. This book was released on 2018-05-12 with total page 1118 pages. Available in PDF, EPUB and Kindle. Book excerpt: This technical meeting will focus on Alloy 718 and Superalloys in this class relative to alloy and process development, production, product applications, trends and the development of advanced modeling tools. The symposium provides an opportunity for authors to present technical advancements relative to a broad spectrum of areas while assessing their impact on related fields associated with this critical alloy group. There are continuing innovations relative to these alloys as well as novel processing techniques which continue to extend applications in very challenging environments ranging from corrosion resistance in the deep sea to high-stressed space applications.
Download or read book The Microstructure of Superalloys written by Madeleine Durand-Charre and published by Routledge. This book was released on 2017-11-22 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents all the main aspects of the microstructure of nickel-base superalloys, and includes micrographs chosen from among a large range of commercial and academic alloys, from the as-cast product to in-situ components, worn from in-service use. Including more than 100 illustrations, the text explains all the transformation mechanisms involved in the origination (creation) of microstructures during solidification or heat treatments (crystallization paths, segregation, crystal orientation, precipitation, TCP, coarsening and rafting, etc.). It includes up-to-date information and data such as phase diagrams, crystallographic structures, and relationships with functional properties. Nearly 300 references provide a key to further investigation.
Download or read book Comprehensive Dissertation Index written by and published by . This book was released on 1989 with total page 1116 pages. Available in PDF, EPUB and Kindle. Book excerpt:
