Download or read book Computational Techniques for Materials Composites and Composite Structures written by B. H. V. Topping and published by . This book was released on 2000 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains a selection of papers that were presented at The Fifth International Conference on Computational Structures Technology and The Second International Conference on Engineering Computational Technology, which were held in Leuven, Belgium from 6-8 September 2000.

Download or read book Computational Mechanics of Composite Materials written by Marcin Marek Kaminski and published by Springer Science & Business Media. This book was released on 2006-03-30 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Mechanics of Composite Materials lays stress on the advantages of combining theoretical advancements in applied mathematics and mechanics with the probabilistic approach to experimental data in meeting the practical needs of engineers. Features: Programs for the probabilistic homogenisation of composite structures with finite numbers of components allow composites to be treated as homogeneous materials with simpler behaviours. Treatment of defects in the interfaces within heterogeneous materials and those arising in composite objects as a whole by stochastic modelling. New models for the reliability of composite structures. Novel numerical algorithms for effective Monte-Carlo simulation. Computational Mechanics of Composite Materials will be of interest to academic and practising civil, mechanical, electronic and aerospatial engineers, to materials scientists and to applied mathematicians requiring accurate and usable models of the behaviour of composite materials.

Download or read book Multiscale Modeling and Simulation of Composite Materials and Structures written by Young Kwon and published by Springer Science & Business Media. This book was released on 2007-12-04 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state-of-the-art in multiscale modeling and simulation techniques for composite materials and structures. It focuses on the structural and functional properties of engineering composites and the sustainable high performance of components and structures. The multiscale techniques can be also applied to nanocomposites which are important application areas in nanotechnology. There are few books available on this topic.

Download or read book Mechanical Response of Composites written by Pedro P. Camanho and published by Springer Science & Business Media. This book was released on 2008-06-20 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Themethodologyfordesigninghigh-performancecompositestructuresisstill evo- ing. The complexity of the response of composite materials and the dif?culties in predicting the composite material properties from the basic properties of the c- stituents result in the need for a well-planned and exhaustive test program. The recommended practice to mitigate the technological risks associated with advanced composite materials is to substantiate the performance and durability of the design in a sequence of steps known as the Building Block Approach. The Building Block Approach ensures that cost and performance objectives are met by testing greater numbers of smaller, less expensive specimens. In this way, technology risks are assessed early in the program. In addition, the knowledge acquired at a given level of structural complexity is built up before progressing to a level of increased complexity. Achieving substantiation of structural performance by testing alone can be p- hibitively expensive because of the number of specimens and components required to characterize all material systems, loading scenarios and boundary conditions. Building Block Approachprogramscan achieve signi?cant cost reductionsby se- ing a synergy between testing and analysis. The more the development relies on analysis, the less expensive it becomes. The use of advanced computational models for the prediction of the mechanical response of composite structures can replace some of the mechanical tests and can signi?cantly reduce the cost of designing with composites while providing to the engineers the information necessary to achieve an optimized design.

Download or read book Fatigue Life Prediction of Composites and Composite Structures written by Anastasios P. Vassilopoulos and published by Woodhead Publishing. This book was released on 2019-10-08 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue Life Prediction of Composites and Composite Structures, Second Edition, is a comprehensive review of fatigue damage and fatigue life modeling and prediction methodologies for composites and their use in practice. In this new edition, existing chapters are fully updated, while new chapters are introduced to cover the most recent developments in the field. The use of composites is growing in structural applications in many industries, including aerospace, marine, wind turbine and civil engineering. However, there are uncertainties about their long-term performance, including performance issues relating to cyclic fatigue loading that hinder the adoption of a commonly accepted credible fatigue design methodology for the life prediction of composite engineering structures. With its distinguished editor and international team of contributors, this book is a standard reference for industry professionals and researchers alike. - Examines past, present and future trends associated with the fatigue life prediction of composite materials and structures - Assesses novel computational methods for fatigue life modeling and prediction of composite materials under constant amplitude loading - Covers a wide range of techniques for predicting fatigue, including their theoretical background and practical applications - Addresses new topics and covers contemporary research developments in the field

Download or read book Advanced Theoretical and Computational Methods for Complex Materials and Structures written by Francesco Tornabene and published by MDPI. This book was released on 2021-08-30 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: The broad use of composite materials and shell structural members with complex geometries in technologies related to various branches of engineering has gained increased attention from scientists and engineers for the development of even more refined approaches and investigation of their mechanical behavior. It is well known that composite materials are able to provide higher values of strength stiffness, and thermal properties, together with conferring reduced weight, which can affect the mechanical behavior of beams, plates, and shells, in terms of static response, vibrations, and buckling loads. At the same time, enhanced structures made of composite materials can feature internal length scales and non-local behaviors, with great sensitivity to different staking sequences, ply orientations, agglomeration of nanoparticles, volume fractions of constituents, and porosity levels, among others. In addition to fiber-reinforced composites and laminates, increased attention has been paid in literature to the study of innovative components such as functionally graded materials (FGMs), carbon nanotubes (CNTs), graphene nanoplatelets, and smart constituents. Some examples of smart applications involve large stroke smart actuators, piezoelectric sensors, shape memory alloys, magnetostrictive and electrostrictive materials, as well as auxetic components and angle-tow laminates. These constituents can be included in the lamination schemes of smart structures to control and monitor the vibrational behavior or the static deflection of several composites. The development of advanced theoretical and computational models for composite materials and structures is a subject of active research and this is explored here for different complex systems, including their static, dynamic, and buckling responses; fracture mechanics at different scales; the adhesion, cohesion, and delamination of materials and interfaces.

Download or read book Composites with Micro and Nano Structure written by Vladimír Kompiš and published by Springer Science & Business Media. This book was released on 2010-02-18 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents new results in the knowledge and simulations for composite nano-materials. It includes selected, extended papers presented in the thematic ECCOMAS conference on Composites with Micro- and Nano-Structure (CMNS) – Computational Modelling and Experiments. It contains atomistic and continuum numerical methods and experimental validation for composite materials reinforced with particles or fibres, porous materials, homogenization and other important topics.

Download or read book Mathematical Methods And Models In Composites written by Vladislav Mantic and published by World Scientific. This book was released on 2013-10-25 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a representative selection of the most relevant, innovative, and useful mathematical methods and models applied to the analysis and characterization of composites and their behaviour on micro-, meso-, and macroscale. It establishes the fundamentals for meaningful and accurate theoretical and computer modelling of these materials in the future. Although the book is primarily concerned with fibre-reinforced composites, which have ever-increasing applications in fields such as aerospace, many of the results presented can be applied to other kinds of composites. The topics covered include: scaling and homogenization procedures in composite structures, thin plate and wave solutions in anisotropic materials, laminated structures, instabilities, fracture and damage analysis of composites, and highly efficient methods for simulation of composites manufacturing. The results presented are useful in the design, fabrication, testing, and industrial applications of composite components and structures. The book is written by well-known experts in different areas of applied mathematics, physics, and composite engineering and is an essential source of reference for graduate and doctoral students, as well as researchers. It is also suitable for non-experts in composites who wish to have an overview of both the mathematical methods and models used in this area and the related open problems requiring further research.

Download or read book Computational Technologies in Materials Science written by Shubham Tayal and published by CRC Press. This book was released on 2021-10-06 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: • Covers material testing and development using computational intelligence • Highlights the technologies to integrate computational intelligence and materials sciences • Discusses how computational tools can generate new materials with advanced applications • Details case studies and detailed applications • Investigates challenges in developing and using computational intelligence in materials science • Analyzes historic changes that are taking place in designing of materials

Download or read book Computational Modeling of Polymer Composites written by Samit Roy and published by CRC Press. This book was released on 2013-09-05 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a better understanding of the theories associated with finite element models of elastic and viscoelastic response of polymers and polymer composites. It covers computational modeling and life-prediction of polymers and polymeric composites in aggressive environments. It begins with a review of mathematical preliminaries, equations of anisotropic elasticity, and then presents finite element analysis of viscoelasticity and the diffusion process in polymers and polymeric composites. The book provides a reference for engineers and scientists and can be used as a textbook in graduate courses.

Download or read book Integrated Computational Materials Engineering ICME written by Somnath Ghosh and published by Springer Nature. This book was released on 2020-03-20 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: ​This book introduces research advances in Integrated Computational Materials Engineering (ICME) that have taken place under the aegis of the AFOSR/AFRL sponsored Center of Excellence on Integrated Materials Modeling (CEIMM) at Johns Hopkins University. Its author team consists of leading researchers in ICME from prominent academic institutions and the Air Force Research Laboratory. The book examines state-of-the-art advances in physics-based, multi-scale, computational-experimental methods and models for structural materials like polymer-matrix composites and metallic alloys. The book emphasizes Ni-based superalloys and epoxy matrix carbon-fiber composites and encompasses atomistic scales, meso-scales of coarse-grained models and discrete dislocations, and micro-scales of poly-phase and polycrystalline microstructures. Other critical phenomena investigated include the relationship between microstructural morphology, crystallography, and mechanisms to the material response at different scales; methods of identifying representative volume elements using microstructure and material characterization, and robust deterministic and probabilistic modeling of deformation and damage. Encompassing a slate of topics that enable readers to comprehend and approach ICME-related issues involved in predicting material performance and failure, the book is ideal for mechanical, civil, and aerospace engineers, and materials scientists, in in academic, government, and industrial laboratories.

Download or read book Computational Methods in Materials Characterisation written by Andrea Alberto Mammoli and published by Witpress. This book was released on 2004 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conference held 5-7 Nov. 2003; organized by Wessex Institute of Technology, UK and University of New Mexico, USA.

Download or read book Proceedings of the American Society for Composites 2014 Twenty ninth Technical Conference on Composite Materials written by Hyonny Kim and published by DEStech Publications, Inc. This book was released on 2014-09-17 with total page 3583 pages. Available in PDF, EPUB and Kindle. Book excerpt: New and not previously published U.S. and international research on composite and nanocomposite materialsFocus on health monitoring/diagnosis, multifunctionality, self-healing, crashworthiness, integrated computational materials engineering (ICME), and moreApplications to aircraft, armor, bridges, ships, and civil structures This fully searchable CD-ROM contains 270 original research papers on all phases of composite materials, presented by specialists from universities, NASA and private corporations such as Boeing. The document is divided into the following sections: Aviation Safety and Aircraft Structures; Armor and Protection; Multifunctional Composites; Effects of Defects; Out of Autoclave Processing; Sustainable Processing; Design and Manufacturing; Stability and Postbuckling; Crashworthiness; Impact and Dynamic Response; Natural, Biobased and Green; Integrated Computational Materials Engineering (ICME); Structural Optimization; Uncertainty Quantification; NDE and SHM Monitoring; Progressive Damage Modeling; Molecular Modeling; Marine Composites; Simulation Tools; Interlaminar Properties; Civil Structures; Textiles. The CD-ROM displays figures and illustrations in articles in full color along with a title screen and main menu screen. Each user can link to all papers from the Table of Contents and Author Index and also link to papers and front matter by using the global bookmarks which allow navigation of the entire CD-ROM from every article. Search features on the CD-ROM can be by full text including all key words, article title, author name, and session title. The CD-ROM has Autorun feature for Windows 2000 or higher products and can also be used with Macintosh computers. The CD includes the program for Adobe Acrobat Reader with Search 11.0. One year of technical support is included with your purchase of this product.

Download or read book Advances in Composite Materials and Structures VII written by William Robert Blain and published by Computational Mechanics. This book was released on 2000 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite materials and structures are extremely complex systems. Their analysis and design is therefore best achieved through the use of computational methods. Comprising reports from engineers and scientists involved in integrating these two important technologies for the advancement of science, engineering and society, this volume features the proceedings of the Seventh International Conference on Computer Methods in Composite Materials and Structures. Topics relating to the simulation, modelling and experimentation of composite materials, as well as the design and analysis of composite structures are covered.

Download or read book Cracking and Damage written by Z.P. Bazant and published by CRC Press. This book was released on 1989-05-30 with total page 567 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the France-US Workshop on Strain Localization and Size Effect due to Cracking and Damage, Laboratorie de Mecanique et Technologie, Cachan, France, 6-9 September 1988.

Download or read book Computational Mesomechanics of Composites written by Leon L. Mishnaevsky, Jr and published by John Wiley & Sons. This book was released on 2007-08-20 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical properties of composite materials can be improved by tailoring their microstructures. Optimal microstructures of composites, which ensure desired properties of composite materials, can be determined in computational experiments. The subject of this book is the computational analysis of interrelations between mechanical properties (e.g., strength, damage resistance stiffness) and microstructures of composites. The methods of mesomechanics of composites are reviewed, and applied to the modelling of the mechanical behaviour of different groups of composites. Individual chapters are devoted to the computational analysis of the microstructure- mechanical properties relationships of particle reinforced composites, functionally graded and particle clusters reinforced composites, interpenetrating phase and unidirectional fiber reinforced composites, and machining tools materials.

Download or read book Composite Materials Qualification written by Frank Abdi and published by . This book was released on 2021-06 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: