Download or read book Computational Solution of Nonlinear Systems of Equations written by Eugene L. Allgower and published by American Mathematical Soc.. This book was released on 1990-04-03 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear equations arise in essentially every branch of modern science, engineering, and mathematics. However, in only a very few special cases is it possible to obtain useful solutions to nonlinear equations via analytical calculations. As a result, many scientists resort to computational methods. This book contains the proceedings of the Joint AMS-SIAM Summer Seminar, ``Computational Solution of Nonlinear Systems of Equations,'' held in July 1988 at Colorado State University. The aim of the book is to give a wide-ranging survey of essentially all of the methods which comprise currently active areas of research in the computational solution of systems of nonlinear equations. A number of ``entry-level'' survey papers were solicited, and a series of test problems has been collected in an appendix. Most of the articles are accessible to students who have had a course in numerical analysis.
Download or read book Computational Solution of Nonlinear Systems of Equations written by Eugene L. Allgower and published by American Mathematical Soc.. This book was released on 1990 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear equations arise in essentially every branch of modern science, engineering, and mathematics. However, in only a very few special cases is it possible to obtain useful solutions to nonlinear equations via analytical calculations. As a result, many scientists resort to computational methods. This book contains the proceedings of the Joint AMS-SIAM Summer Seminar, ``Computational Solution of Nonlinear Systems of Equations,'' held in July 1988 at Colorado State University. The aim of the book is to give a wide-ranging survey of essentially all of the methods which comprise currently active areas of research in the computational solution of systems of nonlinear equations. A number of ``entry-level'' survey papers were solicited, and a series of test problems has been collected in an appendix. Most of the articles are accessible to students who have had a course in numerical analysis.
Download or read book Numerical Solution of Systems of Nonlinear Algebraic Equations written by George D. Byrne and published by Elsevier. This book was released on 2014-05-10 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Solution of Systems of Nonlinear Algebraic Equations contains invited lectures of the NSF-CBMS Regional Conference on the Numerical Solution of Nonlinear Algebraic Systems with Applications to Problems in Physics, Engineering and Economics, held on July 10-14, 1972. This book is composed of 10 chapters and begins with the concepts of nonlinear algebraic equations in continuum mechanics. The succeeding chapters deal with the numerical solution of quasilinear elliptic equations, the nonlinear systems in semi-infinite programming, and the solution of large systems of linear algebraic equations. These topics are followed by a survey of some computational techniques for the nonlinear least squares problem. The remaining chapters explore the problem of nonlinear functional minimization, the modification methods, and the computer-oriented algorithms for solving system. These chapters also examine the principles of contractor theory of solving equations. This book will prove useful to undergraduate and graduate students.
Download or read book Programming for Computations MATLAB Octave written by Svein Linge and published by Springer. This book was released on 2016-08-01 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents computer programming as a key method for solving mathematical problems. There are two versions of the book, one for MATLAB and one for Python. The book was inspired by the Springer book TCSE 6: A Primer on Scientific Programming with Python (by Langtangen), but the style is more accessible and concise, in keeping with the needs of engineering students. The book outlines the shortest possible path from no previous experience with programming to a set of skills that allows the students to write simple programs for solving common mathematical problems with numerical methods in engineering and science courses. The emphasis is on generic algorithms, clean design of programs, use of functions, and automatic tests for verification.
Download or read book Iterative Solution of Nonlinear Equations in Several Variables written by J. M. Ortega and published by SIAM. This book was released on 1970-01-01 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Iterative Solution of Nonlinear Equations in Several Variables provides a survey of the theoretical results on systems of nonlinear equations in finite dimension and the major iterative methods for their computational solution. Originally published in 1970, it offers a research-level presentation of the principal results known at that time.
Download or read book Iterative Methods for Solving Nonlinear Equations and Systems written by Juan R. Torregrosa and published by MDPI. This book was released on 2019-12-06 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solving nonlinear equations in Banach spaces (real or complex nonlinear equations, nonlinear systems, and nonlinear matrix equations, among others), is a non-trivial task that involves many areas of science and technology. Usually the solution is not directly affordable and require an approach using iterative algorithms. This Special Issue focuses mainly on the design, analysis of convergence, and stability of new schemes for solving nonlinear problems and their application to practical problems. Included papers study the following topics: Methods for finding simple or multiple roots either with or without derivatives, iterative methods for approximating different generalized inverses, real or complex dynamics associated to the rational functions resulting from the application of an iterative method on a polynomial. Additionally, the analysis of the convergence has been carried out by means of different sufficient conditions assuring the local, semilocal, or global convergence. This Special issue has allowed us to present the latest research results in the area of iterative processes for solving nonlinear equations as well as systems and matrix equations. In addition to the theoretical papers, several manuscripts on signal processing, nonlinear integral equations, or partial differential equations, reveal the connection between iterative methods and other branches of science and engineering.
Download or read book Solving Nonlinear Equations with Newton s Method written by C. T. Kelley and published by SIAM. This book was released on 2003-01-01 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book on Newton's method is a user-oriented guide to algorithms and implementation. In just over 100 pages, it shows, via algorithms in pseudocode, in MATLAB, and with several examples, how one can choose an appropriate Newton-type method for a given problem, diagnose problems, and write an efficient solver or apply one written by others. It contains trouble-shooting guides to the major algorithms, their most common failure modes, and the likely causes of failure. It also includes many worked-out examples (available on the SIAM website) in pseudocode and a collection of MATLAB codes, allowing readers to experiment with the algorithms easily and implement them in other languages.
Download or read book Algorithms for Continuous Optimization written by E. Spedicato and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: The NATO Advanced Study Institute on "Algorithms for continuous optimiza tion: the state of the art" was held September 5-18, 1993, at II Ciocco, Barga, Italy. It was attended by 75 students (among them many well known specialists in optimiza tion) from the following countries: Belgium, Brasil, Canada, China, Czech Republic, France, Germany, Greece, Hungary, Italy, Poland, Portugal, Rumania, Spain, Turkey, UK, USA, Venezuela. The lectures were given by 17 well known specialists in the field, from Brasil, China, Germany, Italy, Portugal, Russia, Sweden, UK, USA. Solving continuous optimization problems is a fundamental task in computational mathematics for applications in areas of engineering, economics, chemistry, biology and so on. Most real problems are nonlinear and can be of quite large size. Devel oping efficient algorithms for continuous optimization has been an important field of research in the last 30 years, with much additional impetus provided in the last decade by the availability of very fast and parallel computers. Techniques, like the simplex method, that were already considered fully developed thirty years ago have been thoroughly revised and enormously improved. The aim of this ASI was to present the state of the art in this field. While not all important aspects could be covered in the fifty hours of lectures (for instance multiob jective optimization had to be skipped), we believe that most important topics were presented, many of them by scientists who greatly contributed to their development.
Download or read book Iterative Methods for Linear and Nonlinear Equations written by C. T. Kelley and published by SIAM. This book was released on 1995-01-01 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: Linear and nonlinear systems of equations are the basis for many, if not most, of the models of phenomena in science and engineering, and their efficient numerical solution is critical to progress in these areas. This is the first book to be published on nonlinear equations since the mid-1980s. Although it stresses recent developments in this area, such as Newton-Krylov methods, considerable material on linear equations has been incorporated. This book focuses on a small number of methods and treats them in depth. The author provides a complete analysis of the conjugate gradient and generalized minimum residual iterations as well as recent advances including Newton-Krylov methods, incorporation of inexactness and noise into the analysis, new proofs and implementations of Broyden's method, and globalization of inexact Newton methods. Examples, methods, and algorithmic choices are based on applications to infinite dimensional problems such as partial differential equations and integral equations. The analysis and proof techniques are constructed with the infinite dimensional setting in mind and the computational examples and exercises are based on the MATLAB environment.
Download or read book Numerical Methods for Unconstrained Optimization and Nonlinear Equations written by J. E. Dennis, Jr. and published by SIAM. This book was released on 1996-12-01 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has become the standard for a complete, state-of-the-art description of the methods for unconstrained optimization and systems of nonlinear equations. Originally published in 1983, it provides information needed to understand both the theory and the practice of these methods and provides pseudocode for the problems. The algorithms covered are all based on Newton's method or "quasi-Newton" methods, and the heart of the book is the material on computational methods for multidimensional unconstrained optimization and nonlinear equation problems. The republication of this book by SIAM is driven by a continuing demand for specific and sound advice on how to solve real problems. The level of presentation is consistent throughout, with a good mix of examples and theory, making it a valuable text at both the graduate and undergraduate level. It has been praised as excellent for courses with approximately the same name as the book title and would also be useful as a supplemental text for a nonlinear programming or a numerical analysis course. Many exercises are provided to illustrate and develop the ideas in the text. A large appendix provides a mechanism for class projects and a reference for readers who want the details of the algorithms. Practitioners may use this book for self-study and reference. For complete understanding, readers should have a background in calculus and linear algebra. The book does contain background material in multivariable calculus and numerical linear algebra.
Download or read book Nonlinear Systems Vol 1 written by Victoriano Carmona and published by Springer. This book was released on 2018-09-15 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is part of a two volume set which presents the analysis of nonlinear phenomena as a long-standing challenge for research in basic and applied science as well as engineering. It discusses nonlinear differential and differential equations, bifurcation theory for periodic orbits and global connections. The integrability and reversibility of planar vector fields and theoretical analysis of classic physical models are sketched. This first volume concentrates on the mathematical theory and computational techniques that are essential for the study of nonlinear science, a second volume deals with real-world nonlinear phenomena in condensed matter, biology and optics.
Download or read book Methods for Solving Systems of Nonlinear Equations written by Werner C. Rheinboldt and published by SIAM. This book was released on 1998-01-01 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition provides much-needed updates to the original volume. Like the first edition, it emphasizes the ideas behind the algorithms as well as their theoretical foundations and properties, rather than focusing strictly on computational details; at the same time, this new version is now largely self-contained and includes essential proofs. Additions have been made to almost every chapter, including an introduction to the theory of inexact Newton methods, a basic theory of continuation methods in the setting of differentiable manifolds, and an expanded discussion of minimization methods. New information on parametrized equations and continuation incorporates research since the first edition.
Download or read book Computational Solution of Nonlinear Operator Equations written by Louis B. Rall and published by . This book was released on 1979 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical Solutions of Realistic Nonlinear Phenomena written by J. A. Tenreiro Machado and published by Springer Nature. This book was released on 2020-02-19 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection covers new aspects of numerical methods in applied mathematics, engineering, and health sciences. It provides recent theoretical developments and new techniques based on optimization theory, partial differential equations (PDEs), mathematical modeling and fractional calculus that can be used to model and understand complex behavior in natural phenomena. Specific topics covered in detail include new numerical methods for nonlinear partial differential equations, global optimization, unconstrained optimization, detection of HIV- Protease, modelling with new fractional operators, analysis of biological models, and stochastic modelling.
Download or read book Programming for Computations Python written by Svein Linge and published by Springer. This book was released on 2016-07-25 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents computer programming as a key method for solving mathematical problems. There are two versions of the book, one for MATLAB and one for Python. The book was inspired by the Springer book TCSE 6: A Primer on Scientific Programming with Python (by Langtangen), but the style is more accessible and concise, in keeping with the needs of engineering students. The book outlines the shortest possible path from no previous experience with programming to a set of skills that allows the students to write simple programs for solving common mathematical problems with numerical methods in engineering and science courses. The emphasis is on generic algorithms, clean design of programs, use of functions, and automatic tests for verification.
Download or read book Finite Difference Computing with PDEs written by Hans Petter Langtangen and published by Springer. This book was released on 2017-06-21 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is open access under a CC BY 4.0 license. This easy-to-read book introduces the basics of solving partial differential equations by means of finite difference methods. Unlike many of the traditional academic works on the topic, this book was written for practitioners. Accordingly, it especially addresses: the construction of finite difference schemes, formulation and implementation of algorithms, verification of implementations, analyses of physical behavior as implied by the numerical solutions, and how to apply the methods and software to solve problems in the fields of physics and biology.
Download or read book Algebraic Systems of Equations and Computational Complexity Theory written by Tse-kʻo Wang and published by . This book was released on 1994 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: Significant progress has been made during the last fifteen years in the solution of nonlinear systems, particularly in computing fixed points, solving systems of nonlinear equations and applications to equilibrium models. This volume presents a self-contained account of recent work on simplicial and continuation methods applied to the solution of algebraic equations. The contents are divided into eight chapters. Chapters 1 and 2 deal with Kuhn's algorithm; Chapter 3 considers Newton's method, and a comparison between Kuhn's algorithm and Newton's method is presented in Chapter 4. The following four chapters discuss respectively, incremental algorithms and their cost theory, homotopy algorithms, zeros of polynomial mapping, and piecewise linear algorithms. For researchers and graduates interested in algebraic equations and computational complexity theory.
