Download or read book Computational Methods for Physics written by Joel Franklin and published by Cambridge University Press. This book was released on 2013-05-23 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is an increasing need for undergraduate students in physics to have a core set of computational tools. Most problems in physics benefit from numerical methods, and many of them resist analytical solution altogether. This textbook presents numerical techniques for solving familiar physical problems where a complete solution is inaccessible using traditional mathematical methods. The numerical techniques for solving the problems are clearly laid out, with a focus on the logic and applicability of the method. The same problems are revisited multiple times using different numerical techniques, so readers can easily compare the methods. The book features over 250 end-of-chapter exercises. A website hosted by the author features a complete set of programs used to generate the examples and figures, which can be used as a starting point for further investigation. A link to this can be found at www.cambridge.org/9781107034303.
Download or read book Computational Methods in Physics written by Simon Širca and published by Springer. This book was released on 2018-06-21 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to help advanced undergraduate, graduate, and postdoctoral students in their daily work by offering them a compendium of numerical methods. The choice of methods pays significant attention to error estimates, stability and convergence issues, as well as optimization of program execution speeds. Numerous examples are given throughout the chapters, followed by comprehensive end-of-chapter problems with a more pronounced physics background, while less stress is given to the explanation of individual algorithms. The readers are encouraged to develop a certain amount of skepticism and scrutiny instead of blindly following readily available commercial tools. The second edition has been enriched by a chapter on inverse problems dealing with the solution of integral equations, inverse Sturm-Liouville problems, as well as retrospective and recovery problems for partial differential equations. The revised text now includes an introduction to sparse matrix methods, the solution of matrix equations, and pseudospectra of matrices; it discusses the sparse Fourier, non-uniform Fourier and discrete wavelet transformations, the basics of non-linear regression and the Kolmogorov-Smirnov test; it demonstrates the key concepts in solving stiff differential equations and the asymptotics of Sturm-Liouville eigenvalues and eigenfunctions. Among other updates, it also presents the techniques of state-space reconstruction, methods to calculate the matrix exponential, generate random permutations and compute stable derivatives.
Download or read book Computational Methods in Physics Chemistry and Biology written by Paul Harrison and published by John Wiley & Sons. This book was released on 2001-11-28 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Eine gut verständliche Einführung in moderne naturwissenschaftliche Rechenmethoden! Nur geringe physikalische Vorkenntnisse voraussetzend, vermittelt der Autor Grundlagen und komplexere Ansätze anhand vieler Beispiele und ausgesprochen praxisnaher Übungsaufgaben. Besprochen werden alle Rechenmethoden, die im Grundstudium erlernt werden sollen, hinsichtlich ihrer Leistungsfähigkeit und ihrer Anwendungsgebiete.
Download or read book Numerical Methods for Physics written by Alejando L. Garcia and published by Createspace Independent Publishing Platform. This book was released on 2015-06-06 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a broad spectrum of the most important, basic numerical and analytical techniques used in physics -including ordinary and partial differential equations, linear algebra, Fourier transforms, integration and probability. Now language-independent. Features attractive new 3-D graphics. Offers new and significantly revised exercises. Replaces FORTRAN listings with C++, with updated versions of the FORTRAN programs now available on-line. Devotes a third of the book to partial differential equations-e.g., Maxwell's equations, the diffusion equation, the wave equation, etc. This numerical analysis book is designed for the programmer with a physics background. Previously published by Prentice Hall / Addison-Wesley
Download or read book Computational Methods in Plasma Physics written by Stephen Jardin and published by CRC Press. This book was released on 2010-06-02 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Assuming no prior knowledge of plasma physics or numerical methods, Computational Methods in Plasma Physics covers the computational mathematics and techniques needed to simulate magnetically confined plasmas in modern magnetic fusion experiments and future magnetic fusion reactors. Largely self-contained, the text presents the basic concepts neces
Download or read book Modern Physics with Modern Computational Methods written by John Morrison and published by Academic Press. This book was released on 2020-10-13 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Physics with Modern Computational Methods, Third Edition presents the ideas that have shaped modern physics and provides an introduction to current research in the different fields of physics. Intended as the text for a first course in modern physics following an introductory course in physics with calculus, the book begins with a brief and focused account of experiments that led to the formulation of the new quantum theory, while ensuing chapters go more deeply into the underlying physics. In this new edition, the differential equations that arise are converted into sets of linear equation or matrix equations by making a finite difference approximation of the derivatives or by using the spline collocation method. MATLAB programs are described for solving the eigenvalue equations for a particle in a finite well and the simple harmonic oscillator and for solving the radial equation for hydrogen. The lowest-lying solutions of these problems are plotted using MATLAB and the physical significance of these solutions are discussed. Each of the later chapters conclude with a description of modern developments. Makes critical topics accessible by illustrating them with simple examples and figures Presents modern quantum mechanical concepts systematically and applies them consistently throughout the book Utilizes modern computational methods with MATLAB programs to solve the equations that arise in physics, and describes the programs and solutions in detail Covers foundational topics, including transition probabilities, crystal structure, reciprocal lattices, and Bloch theorem to build understanding of applications, such as lasers and semiconductor devices Features expanded exercises and problems at the end of each chapter as well as multiple appendices for quick reference
Download or read book An Introductory Guide to Computational Methods for the Solution of Physics Problems written by George Rawitscher and published by Springer. This book was released on 2018-10-24 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph presents fundamental aspects of modern spectral and other computational methods, which are not generally taught in traditional courses. It emphasizes concepts as errors, convergence, stability, order and efficiency applied to the solution of physical problems. The spectral methods consist in expanding the function to be calculated into a set of appropriate basis functions (generally orthogonal polynomials) and the respective expansion coefficients are obtained via collocation equations. The main advantage of these methods is that they simultaneously take into account all available information, rather only the information available at a limited number of mesh points. They require more complicated matrix equations than those obtained in finite difference methods. However, the elegance, speed, and accuracy of the spectral methods more than compensates for any such drawbacks. During the course of the monograph, the authors examine the usually rapid convergence of the spectral expansions and the improved accuracy that results when nonequispaced support points are used, in contrast to the equispaced points used in finite difference methods. In particular, they demonstrate the enhanced accuracy obtained in the solutionof integral equations. The monograph includes an informative introduction to old and new computational methods with numerous practical examples, while at the same time pointing out the errors that each of the available algorithms introduces into the specific solution. It is a valuable resource for undergraduate students as an introduction to the field and for graduate students wishing to compare the available computational methods. In addition, the work develops the criteria required for students to select the most suitable method to solve the particular scientific problem that they are confronting.
Download or read book Computational Methods of Multi Physics Problems written by Timon Rabczuk and published by MDPI. This book was released on 2019-08-20 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a collection of six papers addressing problems associated with the computational modeling of multi-field problems. Some of the proposed contributions present novel computational techniques, while other topics focus on applying state-of-the-art techniques in order to solve coupled problems in various areas including the prediction of material failure during the lithiation process, which is of major importance in batteries; efficient models for flexoelectricity, which require higher-order continuity; the prediction of composite pipes under thermomechanical conditions; material failure in rock; and computational materials design. The latter exploits nano-scale modeling in order to predict various material properties for two-dimensional materials with applications in, for example, semiconductors. In summary, this book provides a good overview of the computational modeling of different multi-field problems.
Download or read book Computational Methods in Physics and Engineering written by Samuel S M Wong and published by World Scientific Publishing Company. This book was released on 1997-03-15 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical methods are playing an ever-increasing role in physics and engineering. This is especially true after the recent explosion of computing power on the desk-top. This book is aimed at helping the user to make intelligent use of this power tool. Each method is introduced through realistic examples and actual computer programs. The explanations provide the background for making a choice between similar approaches and the knowledge to explore the network for the appropriate existing codes. Tedious proofs and derivations, on the other hand, are delegated to references. Examples of uncoventional methods are also given to stimulate readers in exploring new ways of solving problems. Errata(s) Appendix B, Page 485 “http://www.wspc.com.sg/others/software/3365/ftp.wspc.com.sg/pub/software/3365/” The above links should be replaced with “www.worldscientific.com/doi/suppl/10.1142/3365/suppl_file/3365_software_free.zip”
Download or read book Computational Physics written by Mark E. J. Newman and published by Createspace Independent Publishing Platform. This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains the fundamentals of computational physics and describes the techniques that every physicist should know, such as finite difference methods, numerical quadrature, and the fast Fourier transform. The book offers a complete introduction to the topic at the undergraduate level, and is also suitable for the advanced student or researcher. The book begins with an introduction to Python, then moves on to a step-by-step description of the techniques of computational physics, with examples ranging from simple mechanics problems to complex calculations in quantum mechanics, electromagnetism, statistical mechanics, and more.
Download or read book Computational Physics written by Philipp Scherer and published by Springer Science & Business Media. This book was released on 2013-07-17 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook presents basic and advanced computational physics in a very didactic style. It contains very-well-presented and simple mathematical descriptions of many of the most important algorithms used in computational physics. The first part of the book discusses the basic numerical methods. The second part concentrates on simulation of classical and quantum systems. Several classes of integration methods are discussed including not only the standard Euler and Runge Kutta method but also multi-step methods and the class of Verlet methods, which is introduced by studying the motion in Liouville space. A general chapter on the numerical treatment of differential equations provides methods of finite differences, finite volumes, finite elements and boundary elements together with spectral methods and weighted residual based methods. The book gives simple but non trivial examples from a broad range of physical topics trying to give the reader insight into not only the numerical treatment but also simulated problems. Different methods are compared with regard to their stability and efficiency. The exercises in the book are realised as computer experiments.
Download or read book Numerical Methods in Physics with Python written by Alex Gezerlis and published by Cambridge University Press. This book was released on 2023-05-31 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together idiomatic Python programming, foundational numerical methods, and physics applications, this is an ideal standalone textbook for courses on computational physics. All the frequently used numerical methods in physics are explained, including foundational techniques and hidden gems on topics such as linear algebra, differential equations, root-finding, interpolation, and integration. The second edition of this introductory book features several new codes and 140 new problems (many on physics applications), as well as new sections on the singular-value decomposition, derivative-free optimization, Bayesian linear regression, neural networks, and partial differential equations. The last section in each chapter is an in-depth project, tackling physics problems that cannot be solved without the use of a computer. Written primarily for students studying computational physics, this textbook brings the non-specialist quickly up to speed with Python before looking in detail at the numerical methods often used in the subject.
Download or read book Computational Many Particle Physics written by Holger Fehske and published by Springer. This book was released on 2007-12-10 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt: Looking for the real state of play in computational many-particle physics? Look no further. This book presents an overview of state-of-the-art numerical methods for studying interacting classical and quantum many-particle systems. A broad range of techniques and algorithms are covered, and emphasis is placed on their implementation on modern high-performance computers. This excellent book comes complete with online files and updates allowing readers to stay right up to date.
Download or read book A Survey of Computational Physics written by Rubin Landau and published by Princeton University Press. This book was released on 2011-10-30 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational physics is a rapidly growing subfield of computational science, in large part because computers can solve previously intractable problems or simulate natural processes that do not have analytic solutions. The next step beyond Landau's First Course in Scientific Computing and a follow-up to Landau and Páez's Computational Physics, this text presents a broad survey of key topics in computational physics for advanced undergraduates and beginning graduate students, including new discussions of visualization tools, wavelet analysis, molecular dynamics, and computational fluid dynamics. By treating science, applied mathematics, and computer science together, the book reveals how this knowledge base can be applied to a wider range of real-world problems than computational physics texts normally address. Designed for a one- or two-semester course, A Survey of Computational Physics will also interest anyone who wants a reference on or practical experience in the basics of computational physics. Accessible to advanced undergraduates Real-world problem-solving approach Java codes and applets integrated with text Companion Web site includes videos of lectures
Download or read book A First Course in Computational Physics written by Paul DeVries and published by Jones & Bartlett Learning. This book was released on 2011-01-28 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computers and computation are extremely important components of physics and should be integral parts of a physicist’s education. Furthermore, computational physics is reshaping the way calculations are made in all areas of physics. Intended for the physics and engineering students who have completed the introductory physics course, A First Course in Computational Physics, Second Edition covers the different types of computational problems using MATLAB with exercises developed around problems of physical interest. Topics such as root finding, Newton-Cotes integration, and ordinary differential equations are included and presented in the context of physics problems. A few topics rarely seen at this level such as computerized tomography, are also included. Within each chapter, the student is led from relatively elementary problems and simple numerical approaches through derivations of more complex and sophisticated methods, often culminating in the solution to problems of significant difficulty. The goal is to demonstrate how numerical methods are used to solve the problems that physicists face. Read the review published in Computing in Science & Engineering magazine, March/April 2011 (Vol. 13, No. 2) ? 2011 IEEE, Published by the IEEE Computer Society
Download or read book Experimental and Computational Techniques in Soft Condensed Matter Physics written by Jeffrey Olafsen and published by Cambridge University Press. This book was released on 2010-09-02 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: Soft condensed matter physics relies on a fundamental understanding at the interface between physics, chemistry, biology, and engineering for a host of materials and circumstances that are related to, but outside, the traditional definition of condensed matter physics. Featuring contributions from leading researchers in the field, this book uniquely discusses both the contemporary experimental and computational manifestations of soft condensed matter systems. From particle tracking and image analysis, novel materials and computational methods, to confocal microscopy and bacterial assays, this book will equip the reader for collaborative and interdisciplinary research efforts relating to a range of modern problems in nonlinear and non-equilibrium systems. It will enable both graduate students and experienced researchers to supplement a more traditional understanding of thermodynamics and statistical systems with knowledge of the techniques used in contemporary investigations. Color versions of a selection of the figures are available at www.cambridge.org/9780521115902.
Download or read book Computational Methods written by G.R. Liu and published by Springer Science & Business Media. This book was released on 2007-05-26 with total page 954 pages. Available in PDF, EPUB and Kindle. Book excerpt: The First International Conference on Computational Methods (ICCM04), organized by the department of Mechanical Engineering, National University of Singapore, was held in Singapore, December 15-17, 2004, with great success. This conference proceedings contains some 290 papers from more than 30 countries/regions. The papers cover a broad range of topics such as meshfree particle methods, Generalized FE and Extended FE methods, inverse analysis and optimization methods. Computational methods for geomechanics, machine learning, vibration, shock, impact, health monitoring, material modeling, fracture and damage mechanics, multi-physics and multi-scales simulation, sports and environments are also included. All the papers are pre-reviewed before they are accepted for publication in this proceedings. The proceedings will provide an informative, timely and invaluable resource for engineers and scientists working in the important areas of computational methods.