Download or read book Computational Fluid Dynamics Study for Optimization of a Fin Design written by and published by . This book was released on 2005 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: The three-dimensional, unsteady computations of an Unmanned Underwater vehicle with flapping fins were carried out. Several parametric studies were performed varying the amplitude and frequency of oscillation of the fin and the angle of attack of the fin at the root. The objective of these computations was to investigate the importance of these parameters on the fluid dynamics of force production in order to propel the vehicle at a constant speed of 3 kt. An unstructured grid-based unsteady Navier-Stokes solver with automatic adaptive remeshing was used to compute the flow about the vehicle through several complete cycles of fin oscillation for each of the cases studied. The computations show that the angle of attack of 20 of the root section of the fin is near optimum. The vehicle is capable of sustaining a 3 kt current and maintaining position with the fins flapping at a frequency of 2 Hz and an amplitude of 11 4%. As the frequency of oscillation is increased, the net thrust produced increases, but the vehicle will be subjected to large excursions in the normal force. As the fin is made rigid, there is a substantial penalty in lift during the upstroke.
Download or read book Optimization and Computational Fluid Dynamics written by Dominique Thévenin and published by Springer Science & Business Media. This book was released on 2008-01-08 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: The numerical optimization of practical applications has been an issue of major importance for the last 10 years. It allows us to explore reliable non-trivial configurations, differing widely from all known solutions. The purpose of this book is to introduce the state-of-the-art concerning this issue and many complementary applications are presented.
Download or read book Computational Fluid Dynamics written by Adela Ionescu and published by BoD – Books on Demand. This book was released on 2018-02-14 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the result of a careful selection of contributors in the field of CFD. It is divided into three sections according to the purpose and approaches used in the development of the contributions. The first section describes the "high-performance computing" (HPC) tools and their impact on CFD modeling. The second section is dedicated to "CFD models for local and large-scale industrial phenomena." Two types of approaches are basically contained here: one concerns the adaptation from global to local scale, - e.g., the applications of CFD to study the climate changes and the adaptations to local scale. The second approach, very challenging, is the multiscale analysis. The third section is devoted to "CFD in numerical modeling approach for experimental cases." Its chapters emphasize on the numerical approach of the mathematical models associated to few experimental (industrial) cases. Here, the impact and the importance of the mathematical modeling in CFD are focused on. It is expected that the collection of these chapters will enrich the state of the art in the CFD domain and its applications in a lot of fields. This collection proves that CFD is a highly interdisciplinary research area, which lies at the interface of physics, engineering, applied mathematics, and computer science.
Download or read book Study of computational fluid dynamics simulations for geometry optimization purposes written by Thiago Pandim Barbosa Machado and published by . This book was released on 2014 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Perspectives in Flow Control and Optimization written by Max D. Gunzburger and published by SIAM. This book was released on 2003-01-01 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flow control and optimization has been an important part of experimental flow science throughout the last century. As research in computational fluid dynamics (CFD) matured, CFD codes were routinely used for the simulation of fluid flows. Subsequently, mathematicians and engineers began examining the use of CFD algorithms and codes for optimization and control problems for fluid flows. Perspectives in Flow Control and Optimization presents flow control and optimization as a subdiscipline of computational mathematics and computational engineering. It introduces the development and analysis of several approaches for solving flow control and optimization problems through the use of modern CFD and optimization methods. The author discusses many of the issues that arise in the practical implementation of algorithms for flow control and optimization, and provides the reader with a clear idea of what types of flow control and optimization problems can be solved, how to develop effective algorithms for solving such problems, and potential problems in implementing the algorithms. Audience: this book is written for both those new to the field of control and optimization as well as experienced practitioners, including engineers, applied mathematicians, and scientists interested in computational methods for flow control and optimization. Readers with a solid background in calculus and only slight familiarity with partial differential equations should find the book easy to understand. Knowledge of fluid mechanics, computational fluid dynamics, calculus of variations, control theory or optimization is beneficial, but is not essential, to comprehend the bulk of the presentation. Only Chapter 6 requires a substantially higher level of mathematical knowledge, most notably in the areas of functional analysis, numerical analysis, and partial differential equations.
Download or read book Hybrid Computational Intelligence written by Siddhartha Bhattacharyya and published by Academic Press. This book was released on 2020-03-06 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hybrid Computational Intelligence: Challenges and Utilities is a comprehensive resource that begins with the basics and main components of computational intelligence. It brings together many different aspects of the current research on HCI technologies, such as neural networks, support vector machines, fuzzy logic and evolutionary computation, while also covering a wide range of applications and implementation issues, from pattern recognition and system modeling, to intelligent control problems and biomedical applications. The book also explores the most widely used applications of hybrid computation as well as the history of their development. Each individual methodology provides hybrid systems with complementary reasoning and searching methods which allow the use of domain knowledge and empirical data to solve complex problems.
Download or read book Intelligent Robotics and Applications written by Chun-Yi Su and published by Springer. This book was released on 2012-09-28 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: The three volume set LNAI 7506, LNAI 7507 and LNAI 7508 constitutes the refereed proceedings of the 5th International Conference on Intelligent Robotics and Applications, ICIRA 2012, held in Montreal, Canada, in October 2012. The 197 revised full papers presented were thoroughly reviewed and selected from 271 submissions. They present the state-of-the-art developments in robotics, automation and mechatronics. This volume covers the topics of robot actuators and sensors; robot design, development and control; robot intelligence, learning and linguistics; robot mechanism and design; robot motion analysis and planning; robotic vision, recognition and reconstruction; and planning and navigation.
Download or read book Flow Based Optimization of Products or Devices written by Nils Tångefjord Basse and published by MDPI. This book was released on 2020-11-13 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flow-based optimization of products and devices is an immature field compared to the corresponding topology optimization based on solid mechanics. However, it is an essential part of component development with both internal and/or external flow. The aim of this book is two-fold: (i) to provide state-of-the-art examples of flow-based optimization and (ii) to present a review of topology optimization for fluid-based problems.
Download or read book AIAA Journal written by American Institute of Aeronautics and Astronautics and published by . This book was released on 2008 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CFD Modeling of Complex Chemical Processes written by Li Xi and published by MDPI. This book was released on 2021-09-01 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational fluid dynamics (CFD), which uses numerical analysis to predict and model complex flow behaviors and transport processes, has become a mainstream tool in engineering process research and development. Complex chemical processes often involve coupling between dynamics at vastly different length and time scales, as well as coupling of different physical models. The multiscale and multiphysics nature of those problems calls for delicate modeling approaches. This book showcases recent contributions in this field, from the development of modeling methodology to its application in supporting the design, development, and optimization of engineering processes.
Download or read book Computational Fluid Dynamics 2010 written by Alexander Kuzmin and published by Springer Science & Business Media. This book was released on 2011-05-03 with total page 902 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Conference on Computational Fluid Dynamics is held every two years and brings together physicists, mathematicians and engineers to review and share recent advances in mathematical and computational techniques for modeling fluid flow. The proceedings of the 2010 conference (ICCFD6) held in St Petersburg, Russia, contain a selection of refereed contributions and are meant to serve as a source of reference for all those interested in the state of the art in computational fluid dynamics.
Download or read book Designing Engineering Structures using Stochastic Optimization Methods written by Levent Aydin and published by CRC Press. This book was released on 2020-04-27 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: Among all aspects of engineering, design is the most important step in developing a new product. A systematic approach to managing design issues can only be accomplished by applying mathematical optimization methods. Furthermore, due to the practical issues in engineering problems, there are limitations in using traditional methods. As such, stochastic optimization methods such as differential evolution, simulated annealing, and genetic algorithms are preferable in finding solutions in design optimization problems. This book reviews mechanical engineering design optimization using stochastic methods. It introduces students and design engineers to practical aspects of complicated mathematical optimization procedures, and outlines steps for wide range of selected engineering design problems. It shows how engineering structures are systematically designed. Many new engineering design applications based on stochastic optimization techniques in automotive, energy, military, naval, manufacturing process and fluids-heat transfer, are described in the book. For each design optimization problem described, background is provided for understanding the solutions. There are very few books on optimization that include engineering applications. They cover limited applications, and that too of well-known design problems of advanced and niche nature. Common problems are hardly addressed. Thus, the subject has remained fairly theoretical. To overcome this, each chapter in this book is contributed by at least one academic and one industrial expert researcher.
Download or read book Proceedings of the 2011 2nd International Congress on Computer Applications and Computational Science written by Ford Lumban Gaol and published by Springer Science & Business Media. This book was released on 2012-02-23 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest inventions in computer technology influence most of human daily activities. In the near future, there is tendency that all of aspect of human life will be dependent on computer applications. In manufacturing, robotics and automation have become vital for high quality products. In education, the model of teaching and learning is focusing more on electronic media than traditional ones. Issues related to energy savings and environment is becoming critical. Computational Science should enhance the quality of human life, not only solve their problems. Computational Science should help humans to make wise decisions by presenting choices and their possible consequences. Computational Science should help us make sense of observations, understand natural language, plan and reason with extensive background knowledge. Intelligence with wisdom is perhaps an ultimate goal for human-oriented science. This book is a compilation of some recent research findings in computer application and computational science. This book provides state-of-the-art accounts in Computer Control and Robotics, Computers in Education and Learning Technologies, Computer Networks and Data Communications, Data Mining and Data Engineering, Energy and Power Systems, Intelligent Systems and Autonomous Agents, Internet and Web Systems, Scientific Computing and Modeling, Signal, Image and Multimedia Processing, and Software Engineering.
Download or read book Selected Problems in Fluid Flow and Heat Transfer written by Artur J. Jaworski and published by MDPI. This book was released on 2019-09-20 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid flow and heat transfer processes play an important role in many areas of science and engineering, from the planetary scale (e.g., influencing weather and climate) to the microscopic scales of enhancing heat transfer by the use of nanofluids; understood in the broadest possible sense, they also underpin the performance of many energy systems. This topical Special Issue of Energies is dedicated to the recent advances in this very broad field. This book will be of interest to readers not only in the fields of mechanical, aerospace, chemical, process and petroleum, energy, earth, civil ,and flow instrumentation engineering but, equally, biological and medical sciences, as well as physics and mathematics; that is, anywhere that “fluid flow and heat transfer” phenomena may play an important role or be a subject of worthy research pursuits.
Download or read book Thermoelectrics and its Energy Harvesting 2 Volume Set written by David Michael Rowe and published by CRC Press. This book was released on 2018-10-03 with total page 1120 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprising two volumes, Thermoelectrics and Its Energy Harvesting reviews the vast improvements in technology and application of thermoelectric energy with a specific intention to reduce and reuse waste heat and improve novel techniques for the efficient acquisition and use of energy.Materials, Preparation, and Characterization in Thermoelectrics i
Download or read book Heat and Mass Transfer written by and published by BoD – Books on Demand. This book was released on 2019-09-11 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat and mass transfer is the core science for many industrial processes as well as technical and scientific devices. Automotive, aerospace, power generation (both by conventional and renewable energies), industrial equipment and rotating machinery, materials and chemical processing, and many other industries are requiring heat and mass transfer processes. Since the early studies in the seventeenth and eighteenth centuries, there has been tremendous technical progress and scientific advances in the knowledge of heat and mass transfer, where modeling and simulation developments are increasingly contributing to the current state of the art. Heat and Mass Transfer - Advances in Science and Technology Applications aims at providing researchers and practitioners with a valuable compendium of significant advances in the field.
