Download or read book Computational Fluid Dynamics Applications in Food Processing written by C. Anandharamakrishnan and published by Springer Science & Business Media. This book was released on 2013-08-13 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Fluid Dynamics (CFD) has been applied extensively to great benefit in the food processing sector. Its numerous applications include: predicting the gas flow pattern and particle histories, such as temperature, velocity, residence time, and impact position during spray drying; modeling of ovens to provide information about temperature and airflow pattern throughout the baking chamber to enhance heat transfer and in turn final product quality; designing hybrid heating ovens, such as microwave-infrared, infrared-electrical or microwave-electrical ovens for rapid baking; model the dynamics of gastrointestinal contents during digestion based on the motor response of the GI tract and the physicochemical properties of luminal contents; retort processing of canned solid and liquid foods for understanding and optimization of the heat transfer processes. This Brief will recapitulate the various applications of CFD modeling, discuss the recent developments in this field, and identify the strengths and weaknesses of CFD when applied in the food industry.
Download or read book Computational Fluid Dynamics in Food Processing written by Da-Wen Sun and published by CRC Press. This book was released on 2018-10-26 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since many processes in the food industry involve fluid flow and heat and mass transfer, Computational Fluid Dynamics (CFD) provides a powerful early-stage simulation tool for gaining a qualitative and quantitative assessment of the performance of food processing, allowing engineers to test concepts all the way through the development of a process or system. Published in 2007, the first edition was the first book to address the use of CFD in food processing applications, and its aims were to present a comprehensive review of CFD applications for the food industry and pinpoint the research and development trends in the development of the technology; to provide the engineer and technologist working in research, development, and operations in the food industry with critical, comprehensive, and readily accessible information on the art and science of CFD; and to serve as an essential reference source to undergraduate and postgraduate students and researchers in universities and research institutions. This will continue to be the purpose of this second edition. In the second edition, in order to reflect the most recent research and development trends in the technology, only a few original chapters are updated with the latest developments. Therefore, this new edition mostly contains new chapters covering the analysis and optimization of cold chain facilities, simulation of thermal processing and modeling of heat exchangers, and CFD applications in other food processes.
Download or read book Computational Fluid Dynamics in Food Processing written by Da-Wen Sun and published by CRC Press. This book was released on 2018-10-26 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since many processes in the food industry involve fluid flow and heat and mass transfer, Computational Fluid Dynamics (CFD) provides a powerful early-stage simulation tool for gaining a qualitative and quantitative assessment of the performance of food processing, allowing engineers to test concepts all the way through the development of a process or system. Published in 2007, the first edition was the first book to address the use of CFD in food processing applications, and its aims were to present a comprehensive review of CFD applications for the food industry and pinpoint the research and development trends in the development of the technology; to provide the engineer and technologist working in research, development, and operations in the food industry with critical, comprehensive, and readily accessible information on the art and science of CFD; and to serve as an essential reference source to undergraduate and postgraduate students and researchers in universities and research institutions. This will continue to be the purpose of this second edition. In the second edition, in order to reflect the most recent research and development trends in the technology, only a few original chapters are updated with the latest developments. Therefore, this new edition mostly contains new chapters covering the analysis and optimization of cold chain facilities, simulation of thermal processing and modeling of heat exchangers, and CFD applications in other food processes.
Download or read book Mathematical and Statistical Applications in Food Engineering written by Surajbhan Sevda and published by CRC Press. This book was released on 2020-01-30 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by experts from all over the world, the book comprises the latest applications of mathematical and models in food engineering and fermentation. It provides the fundamentals on statistical methods to solve standard problems associated with food engineering and fermentation technology. Combining theory with a practical, hands-on approach, this book covers key aspects of food engineering. Presenting cuttingedge information, the book is an essential reference on the fundamental concepts associated with food engineering.
Download or read book Mathematical Modeling of Food Processing written by Mohammed M. Farid and published by CRC Press. This book was released on 2010-05-21 with total page 1275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by international experts from industry, research centers, and academia, Mathematical Modeling of Food Processing discusses the physical and mathematical analysis of transport phenomena associated with food processing. The models presented describe many of the important physical and biological transformations that occur in food during proces
Download or read book Advanced Computational Techniques for Heat and Mass Transfer in Food Processing written by Krunal M. Gangawane and published by CRC Press. This book was released on 2022-02-01 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational methods have risen as a powerful technique for exploring the system phenomena and solving real-life problems. Currently, there are two principle computational approaches for system analysis: continuous and discrete. In the continuous approach, the governing equations can be obtained by applying the fundamental laws, such as conservation of mass, momentum, and energy over an infinitesimal control volume. On the other hand, the discrete approach concentrates on mimicking the molecular movement within the system. Both approaches have pros and cons, and continuous development and improvement in the existing computational methods are ongoing. Advanced Computational Techniques for Heat and Mass Transfer in Food Processing provides, in a single source, information on the use of methods based on numerical and computational analysis as applied in food science and technology. It explores the use of various numerical/computational techniques for the simulation of fluid flow and heat and mass transfer within food products. Key Features: Explores various numerical techniques used for modeling and validation Describes the knowhow of numerical and computational techniques for food process operations Covers a detailed numerical or computational approach of the principles of heat and mass transfer in the food processing operation Discusses the detailed computational simulation procedure of the food operation Recent years have witnessed a rapid development in the field of computational techniques owing to its abundant benefit to the food processing industry. The relevance of advanced computational methods has helped in understanding the fundamental physics of thermal and hydrodynamic behavior that can provide benefits to the food processing industry in numerous applications. As a single information source for those interested in the use of methods based on numerical and computational analysis as applied in food science and technology, this book will ably serve any food academician or researcher in learning the advanced numerical techniques exploring fluid flow, crystallization, and other food processing operations.
Download or read book Essentials and Applications of Food Engineering written by C. Anandharamakrishnan and published by CRC Press. This book was released on 2019-03-15 with total page 996 pages. Available in PDF, EPUB and Kindle. Book excerpt: Essentials & Applications of Food Engineering provides a comprehensive understanding of food engineering operations and their practical and industrial utility. It presents pertinent case studies, solved numerical problems, and multiple choice questions in each chapter and serves as a ready reference for classroom teaching and exam preparations. The first part of this textbook contains the introductory topics on units and dimensions, material balance, energy balance, and fluid flow. The second part deals with the theory and applications of heat and mass transfer, psychrometry, and reaction kinetics. The subsequent chapters of the book present the heat and mass transfer operations such as evaporation, drying, refrigeration, freezing, mixing, and separation. The final section focuses on the thermal, non-thermal, and nanotechnology-based novel food processing techniques, 3D food printing, active and intelligent food packaging, and fundamentals of CFD modeling. Features Features 28 case studies to provide a substantial understanding of the practical and industrial applications of various food engineering operations Includes 178 solved numerical problems and 285 multiple choice questions Highlights the application of mass balance in food product traceability and the importance of viscosity measurement in a variety of food products Provides updated information on novel food processing techniques such as cold plasma, 3D food printing, nanospray drying, electrospraying, and electrospinning The textbook is designed for undergraduate and graduate students pursuing Food Technology and Food Process Engineering courses. This book would also be of interest to course instructors and food industry professionals.
Download or read book Innovative Food Processing Technologies written by Kai Knoerzer, PhD and published by John Wiley & Sons. This book was released on 2011-01-31 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part of the IFT (Institute of Food Technologists) series, this book discusses multiphysics modeling and its application in the development, optimization, and scale-up of emerging food processing technologies. The book covers recent research outcomes to demonstrate process efficiency and the impact on scalability, safety, and quality, and technologies including High Pressure Processing, High Pressure Thermal Sterilization, Radiofrequency, Ultrasound, Ultraviolet, and Pulsed Electric Fields Processing. Ideal for food and process engineers, food technologists, equipment designers, microbiologists, and research and development personnel, this book covers the importance and the methods for applying multiphysics modeling for the design, development, and application of these technologies.
Download or read book Computational Fluid Dynamics written by Jiyuan Tu and published by Butterworth-Heinemann. This book was released on 2012-11-07 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to CFD fundamentals and using commercial CFD software to solve engineering problems, designed for the wide variety of engineering students new to CFD, and for practicing engineers learning CFD for the first time. Combining an appropriate level of mathematical background, worked examples, computer screen shots, and step by step processes, this book walks the reader through modeling and computing, as well as interpreting CFD results. The first book in the field aimed at CFD users rather than developers. New to this edition: A more comprehensive coverage of CFD techniques including discretisation via finite element and spectral element as well as finite difference and finite volume methods and multigrid method. Coverage of different approaches to CFD grid generation in order to closely match how CFD meshing is being used in industry. Additional coverage of high-pressure fluid dynamics and meshless approach to provide a broader overview of the application areas where CFD can be used. 20% new content .
Download or read book Non Newtonian Flow and Applied Rheology written by R. P. Chhabra and published by Elsevier. This book was released on 2011-04-08 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book bridges the gap between the theoretical work of the rheologist, and the practical needs of those who have to design and operate the systems in which these materials are handled or processed. It is an established and important reference for senior level mechanical engineers, chemical and process engineers, as well as any engineer or scientist who needs to study or work with these fluids, including pharmaceutical engineers, mineral processing engineers, medical researchers, water and civil engineers. This new edition covers a considerably broader range of topics than its predecessor, including computational fluid dynamics modelling techniques, liquid/solid flows and applications to areas such as food processing, among others. * Written by two of the world's leading experts, this is the only dedicated non-Newtonian flow reference in print. * Since first publication significant advances have been made in almost all areas covered in this book, which are incorporated in the new edition, including developments in CFD and computational techniques, velocity profiles in pipes, liquid/solid flows and applications to food processing, and new heat/mass transfer methods and models. * Covers both basic rheology and the fluid mechanics of NN fluids ? a truly self-contained reference for anyone studying or working with the processing and handling of fluids
Download or read book Computational Fluid Dynamics written by Jiri Blazek and published by Elsevier. This book was released on 2005-12-20 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Fluid Dynamics (CFD) is an important design tool in engineering and also a substantial research tool in various physical sciences as well as in biology. The objective of this book is to provide university students with a solid foundation for understanding the numerical methods employed in today's CFD and to familiarise them with modern CFD codes by hands-on experience. It is also intended for engineers and scientists starting to work in the field of CFD or for those who apply CFD codes. Due to the detailed index, the text can serve as a reference handbook too. Each chapter includes an extensive bibliography, which provides an excellent basis for further studies.
Download or read book From Desktop to Teraflop written by National Science Foundation (U.S.). Blue Ribbon Panel on High Performance Computing and published by . This book was released on 1993 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optimization and Computational Fluid Dynamics written by Dominique Thévenin and published by Springer Science & Business Media. This book was released on 2008-01-08 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: The numerical optimization of practical applications has been an issue of major importance for the last 10 years. It allows us to explore reliable non-trivial configurations, differing widely from all known solutions. The purpose of this book is to introduce the state-of-the-art concerning this issue and many complementary applications are presented.
Download or read book Computational Fluid Dynamics Simulation of Spray Dryers written by Meng Wai Woo and published by CRC Press. This book was released on 2016-11-03 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridging the gap in understanding between the spray drying industry and the numerical modeler on spray drying, Computational Fluid Dynamics Simulation of Spray Dryers: An Engineer’s Guide shows how to numerically capture important physical phenomena within a spray drying process using the CFD technique. It includes numerical strategies to effectively describe these phenomena, which are collated from research work and CFD industrial consultation, in particular to the dairy industry. Along with showing how to set up models, the book helps readers identify the capabilities and uncertainties of the CFD technique for spray drying. After briefly covering the basics of CFD, the book discusses airflow modeling, atomization and particle tracking, droplet drying, quality modeling, agglomeration and wall deposition modeling, and simulation validation techniques. The book also answers questions related to common challenges in industrial applications.
Download or read book Nanoscale Processing written by Sabu Thomas and published by Elsevier. This book was released on 2020-10-22 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoscale Processing outlines recent advances in processing techniques for a range of nanomaterial types. New developments in the processing of nanostructured materials are being applied in diverse fields. This book offers in-depth information and analysis of a range of processing techniques for nanostructures, and also covers nanocharacterization aspects thoroughly. Topics covered include zero dimensional nanostructures, nanostructured biomaterials, carbon-based nanostructures, polymeric and liposomal nanostructures, and quantum dots. This book is an important resource for materials scientists and engineers looking to learn more about a variety of processing techniques for various nanomaterial classes, for use in both the industrial and biomedical sectors. - Explains major nanoscale processing techniques, outlining in which situations each should be used - Discuses a range of nanomaterial classes, including nanobiomaterials, polymeric nanomaterials, optical nanomaterials and magnetic nanomaterials - Explores the challenges of using certain processing techniques for certain classes of nanomaterial
Download or read book Computational Techniques for Multiphase Flows written by Guan Heng Yeoh and published by Elsevier. This book was released on 2009-10-07 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mixed or multiphase flows of solid/liquid or solid/gas are commonly found in many industrial fields, and their behavior is complex and difficult to predict in many cases. The use of computational fluid dynamics (CFD) has emerged as a powerful tool for the understanding of fluid mechanics in multiphase reactors, which are widely used in the chemical, petroleum, mining, food, beverage and pharmaceutical industries. Computational Techniques for Multiphase Flows enables scientists and engineers to the undertand the basis and application of CFD in muliphase flow, explains how to use the technique, when to use it and how to interpret the results and apply them to improving aplications in process enginering and other multiphase application areas including the pumping, automotive and energy sectors. - Understandable guide to a complex subject - Important in many industries - Ideal for potential users of CFD
Download or read book Computational Fluid Dynamics for Engineers written by Bengt Andersson and published by Cambridge University Press. This book was released on 2011-12-22 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational fluid dynamics, CFD, has become an indispensable tool for many engineers. This book gives an introduction to CFD simulations of turbulence, mixing, reaction, combustion and multiphase flows. The emphasis on understanding the physics of these flows helps the engineer to select appropriate models to obtain reliable simulations. Besides presenting the equations involved, the basics and limitations of the models are explained and discussed. The book combined with tutorials, project and power-point lecture notes (all available for download) forms a complete course. The reader is given hands-on experience of drawing, meshing and simulation. The tutorials cover flow and reactions inside a porous catalyst, combustion in turbulent non-premixed flow, and multiphase simulation of evaporation spray respectively. The project deals with design of an industrial-scale selective catalytic reduction process and allows the reader to explore various design improvements and apply best practice guidelines in the CFD simulations.
