Download or read book Complex and Composite Metal Oxides for Gas VOC and Humidity Sensors Volume 2 written by Bal Chandra Yadav and published by Elsevier. This book was released on 2024-04-01 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: Approx.530 pages Provides an overview of the material preparation and synthesis strategies of metal oxide composite and metal oxide hybrid materials for use in gas and humidity sensors Reviews emerging advanced metal oxide materials such as perovskites, spinel ferrites, and quaternary materials for gas and VOC sensors Discusses the potential opportunities and challenges to be circumvented in the use of metal oxide materials to enable new sensor technologies

Download or read book Complex and Composite Metal Oxides for Gas VOC and Humidity Sensors Volume 1 written by Bal Chandra Yadav and published by Elsevier. This book was released on 2023-10-16 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complex and Composite Metal Oxides for Gas, VOC, and Humidity Sensors focuses on an overview of the advanced nanocomposite metal oxide materials for use in sensors for environmental monitoring applications. Volume 1 Fundamentals and Approaches introduces the ground rules essential for the development of smart gas, VOC and humidity sensors. This volume familiarizes researchers with the different sensors (resistive, electrolyte, FET, optical etc.) developed on various properties that includes electrical, SPR, luminescence, fiber optics etc. fabricated using metal oxide hybrids and nanocomposites. Introduces fundamentals of electrical and optical gas and humidity sensors Reviews metal oxide hybrid materials for gas and humidity sensor applications, including metal oxide/polymer and metal oxide/carbon composite materials Discusses metal oxide candidate materials for use in gas, VOC, and humidity sensors

Download or read book Semiconductor Gas Sensors written by Raivo Jaaniso and published by Woodhead Publishing. This book was released on 2019-09-24 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor Gas Sensors, Second Edition, summarizes recent research on basic principles, new materials and emerging technologies in this essential field. Chapters cover the foundation of the underlying principles and sensing mechanisms of gas sensors, include expanded content on gas sensing characteristics, such as response, sensitivity and cross-sensitivity, present an overview of the nanomaterials utilized for gas sensing, and review the latest applications for semiconductor gas sensors, including environmental monitoring, indoor monitoring, medical applications, CMOS integration and chemical warfare agents. This second edition has been completely updated, thus ensuring it reflects current literature and the latest materials systems and applications. Includes an overview of key applications, with new chapters on indoor monitoring and medical applications Reviews developments in gas sensors and sensing methods, including an expanded section on gas sensor theory Discusses the use of nanomaterials in gas sensing, with new chapters on single-layer graphene sensors, graphene oxide sensors, printed sensors, and much more

Download or read book Handbook of Gas Sensor Materials written by Ghenadii Korotcenkov and published by Springer. This book was released on 2016-08-23 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two volumes of Handbook of Gas Sensor Materials provide a detailed and comprehensive account of materials for gas sensors, including the properties and relative advantages of various materials. Since these sensors can be applied for the automation of myriad industrial processes, as well as for everyday monitoring of such activities as public safety, engine performance, medical therapeutics, and in many other situations, this handbook is of great value. Gas sensor designers will find a treasure trove of material in these two books.

Download or read book The Stannic Oxide Gas SensorPrinciples and Applications written by Kousuke Ihokura and published by CRC Press. This book was released on 2017-12-14 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Stannic Oxide Gas Sensor presents a comprehensive overview of the background science and technology of the subject, including practical information on its applications and the electronic circuits with which it is associated. The book explains the chemistry of the device and covers typical methods of fabrication. Sensitivity and selectivity are addressed, and the problems of drift with ambient temperature, relative humidity, and time are fully discussed. The book also presents examples of industrial, commercial, and domestic applications. It explains the design of appropriate electronic circuits and describes methods for testing and characterizing sensors. Advantages and disadvantages of sensors are assessed as well.

Download or read book Handbook of Gas Sensor Materials written by Ghenadii Korotcenkov and published by Springer. This book was released on 2016-08-23 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two volumes of Handbook of Gas Sensor Materials provide a detailed and comprehensive account of materials for gas sensors, including the properties and relative advantages of various materials. Since these sensors can be applied for the automation of myriad industrial processes, as well as for everyday monitoring of such activities as public safety, engine performance, medical therapeutics, and in many other situations, this handbook is of great value. Gas sensor designers will find a treasure trove of material in these two books.

Download or read book Toxic Gas Sensors and Biosensors written by Inamuddin and published by Materials Research Forum LLC. This book was released on 2021-02-15 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book focuses on novel sensor materials and their environmental and healthcare applications, such as NO2 detection, toxic gas and biosensing, hydrazine determination, glucose sensing and the detection of toxins and pollutants on surfaces. Materials covered include catalytic nanomaterials, metal oxides, perovskites, zeolites, spinels, graphene-based gas sensors, CNT/Ni nanocomposites, glucose biosensors, single and multi-layered stacked MXenes, black phosphorus, transition metal dichalcogenides and P3OT thin films. Keywords: Toxic Gas Sensors, Biosensors, Nitrogen Dioxide Detection, Hydrazine Determination, Glucose Sensing, Catalytic Nanomaterials, Metal Oxides, Perovskites, Zeolites, Spinels, Graphene-based Gas Sensors, CNT/Ni Nanocomposites, Mxenes, Black Phosphorus, Transition Metal Dichalcogenides, P3OT Thin Films.

Download or read book Science and Technology of Chemiresistor Gas Sensors written by Dinesh K. Aswal and published by Nova Publishers. This book was released on 2007 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas sensor technology has advanced remarkably during past few decades and has become one of the indispensable technologies for modern society. Varieties of gas sensors are commercially available and, using innovative ideas, efforts are being made to develop gas sensors of next generation having very small size with very low power consumption. The ultimate model for this is probably given by sensory organs of our own body, which are implanted finely and work well with a very modest amount of energy. In order to achieve this goal, it is essential that various aspects of gas sensors are seriously considered. These include understanding of gas sensing mechanisms, development of new materials and methods to synthesise them into selective sensors, innovations in nanostructured materials, measurement methods, microfabrication of sensors, exploring intelligent sensing system, etc. This book examines these issues pertaining to chemiresistive gas sensors.

Download or read book Metal Oxide Based Nanofibers and Their Applications written by Vincenzo Esposito and published by Elsevier. This book was released on 2021-10-25 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide-based Nanofibers and their Applications provides an in-depth overview on developments surrounding the synthesis, characterization properties, and applications achieved by scientific leaders in the area. Sections deal with the theoretical and experimental aspects of the synthesis and methodologies to control microstructure, composition and shape of the nanofibrous metal oxides, review the applications of metal oxide nanofibers in diverse technologies, with special focus on the relation between the structural, morphological and compositional features of the nanofibers, cover applications of metal oxide nanofibers in the fields of sensing (biosensing, gas sensing), and consider biomedical and cleaning technologies. Lastly, a final section covers their application in energy generation and storage technologies (e. g. piezoelectric, solar cells, solid oxide fuel cells, lithium-ion batteries, supercapacitors, and hydrogen storage are reviewed. Reviews electrospinning methods for the synthesis and design of nanocomposites and hybrid metal oxide nanofibers Discusses applications of metal oxide nanofibers in sensing, biomedical fields, cleaning technologies, and energy Emphasizes the structural, morphological and compositional properties of nanofibers and their effect on device performance

Download or read book Noble Metal Metal Oxide Hybrid Nanoparticles written by Satyabrata Mohapatra and published by Elsevier. This book was released on 2018-10-11 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: Noble Metal-Metal Oxide Hybrid Nanoparticles: Fundamentals and Applications sets out concepts and emerging applications of hybrid nanoparticles in biomedicine, antibacterial, energy storage and electronics. The hybridization of noble metals (Gold, Silver, Palladium and Platinum) with metal-oxide nanoparticles exhibits superior features when compared to individual nanoparticles. In some cases, metal oxides act as semiconductors, such as nano zinc oxide or titanium oxide nanoparticles, where their hybridization with silver nanoparticles, enhanced significantly their photocatalytic efficiency. The book highlights how such nanomaterials are used for practical applications. Examines the properties of metal-metal oxide hybrid nanoparticles that make them so adaptable Explores the mechanisms by which nanoparticles interact with each other, showing how these can be exploited for practical applications Shows how metal oxide hybrid nanomaterials are used in a range of industry sectors, including energy, the environment and healthcare

Download or read book MEMS and Nanotechnology for Gas Sensors written by Sunipa Roy and published by CRC Press. This book was released on 2017-12-19 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: How Can We Lower the Power Consumption of Gas Sensors? There is a growing demand for low-power, high-density gas sensor arrays that can overcome problems relative to high power consumption. Low power consumption is a prerequisite for any type of sensor system to operate at optimum efficiency. Focused on fabrication-friendly microelectromechanical systems (MEMS) and other areas of sensor technology, MEMS and Nanotechnology for Gas Sensors explores the distinct advantages of using MEMS in low power consumption, and provides extensive coverage of the MEMS/nanotechnology platform for gas sensor applications. This book outlines the microfabrication technology needed to fabricate a gas sensor on a MEMS platform. It discusses semiconductors, graphene, nanocrystalline ZnO-based microfabricated sensors, and nanostructures for volatile organic compounds. It also includes performance parameters for the state of the art of sensors, and the applications of MEMS and nanotechnology in different areas relevant to the sensor domain. In addition, the book includes: An introduction to MEMS for MEMS materials, and a historical background of MEMS A concept for cleanroom technology The substrate materials used for MEMS Two types of deposition techniques, including chemical vapour deposition (CVD) The properties and types of photoresists, and the photolithographic processes Different micromachining techniques for the gas sensor platform, and bulk and surface micromachining The design issues of a microheater for MEMS-based sensors The synthesis technique of a nanocrystalline metal oxide layer A detailed review about graphene; its different deposition techniques; and its important electronic, electrical, and mechanical properties with its application as a gas sensor Low-cost, low-temperature synthesis techniques An explanation of volatile organic compound (VOC) detection and how relative humidity affects the sensing parameters MEMS and Nanotechnology for Gas Sensors provides a broad overview of current, emerging, and possible future MEMS applications. MEMS technology can be applied in the automotive, consumer, industrial, and biotechnology domains.

Download or read book Sulfur Dioxide Sensors written by Loveleen Kaur Gulati and published by Materials Research Forum LLC. This book was released on 2021-03-08 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent progress on the sensing and monitoring of sulfur dioxide in the environment is presented. The sensing materials covered include potentiometric gas sensors, amperometric sensors, optical sensors involving colorimetric and fluorescence changes, sensors based on ionic liquids, semiconducting metal-oxide sensors, photoacoustic detectors and biosensors. Keywords: Sulfur Dioxide Toxicity, Environmental Effects of SO2, Health Effects of SO2, Potentiometric Gas Sensing, Amperometric Gas Sensing, Optical Gas Sensing, Colorimetric Gas Sensing, Fluorescence-based Gas Sensing, Ionic Liquids for SO2 Sensing, Semiconducting Metal-Oxides for SO2 Detection, Photoacoustic Gas Detectors, Biosensors for SO2 Monitoring.

Download or read book Fundamentals and Applications of Chemical Sensors written by Dennis Schuetzle and published by . This book was released on 1986 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the first comprehensive collection of articles on the fundamentals and applications of a wide variety of chemical sensors. Discusses a range of topics from the development of new sensor concepts to improvement in sensors that have been mass produced for several years. Specific types of sensors discussed include oxygen, electrochemical, microbial, drug, and glucose sensors.

Download or read book Metal Oxide Carbon Hybrid Materials written by Muhammad Akram Chaudhry and published by Elsevier. This book was released on 2022-03-20 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide–Carbon Hybrid Materials: Synthesis, Properties and Applications reviews the advances in the fabrication and application of metal oxide–carbon-based nanocomposite materials. Their unique properties make them ideal materials for gas-sensing, photonics, catalysis, opto-electronic, and energy-storage applications. In the first section, the historical background to the hybrid materials based on metal oxide–carbon and the hybridized metal oxide composites is provided. It also highlights several popular methods for the preparation of metal oxide–carbon composites through solid-state or solution-phase reactions, and extensively discusses the materials’ properties. Fossil fuels and renewable energy sources cannot meet the ever-increasing energy demands of an industrialized and technology-driven global society. Therefore, the role of metal oxide–carbon composites in energy generation, hydrogen production, and storage devices, such as rechargeable batteries and supercapacitors, is of extreme importance. These problems are discussed in in the second section of the book. Rapid industrialization has resulted in serious environmental issues which in turn have caused serious health problems that require the immediate attention of researchers. In the third section, the use of metal oxide–carbon composites in water purification, photodegradation of industrial contaminants, and biomedical applications that can help to clean the environment and provide better healthcare solutions is described. The final section is devoted to the consideration of problems associated with the development of sensors for various applications. Numerous studies performed in this area have shown that the use of composites can significantly improve the operating parameters of such devices. Metal Oxide–Carbon Hybrid Materials: Synthesis, Properties and Applications presents a comprehensive review of the science related to metal oxide–carbon composites and how researchers are utilizing these materials to provide solutions to a large array of problems. Reviews the fundamental properties and fabrication methods of metal-oxide–carbon composites Discusses applications in energy, including energy generation, hydrogen production and storage, rechargeable batteries, and supercapacitors Includes current and emerging applications in environmental remediation and sensing

Download or read book Solid State Gas Sensors written by P. T. Moseley and published by CRC Press. This book was released on 1987 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: An overview of the principles & current technology of the main sensor types used for flammable gas detection, oxygen monitoring in combustion & car-exhaust control. Also includes toxic gas monitoring. A companion volume to Techniques & Mechanisms in Gas Sensing.

Download or read book Semiconducting Metal Oxides for Gas Sensing written by Yonghui Deng and published by Springer Nature. This book was released on 2023-08-23 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this book focuses on the synthesis, design, and application of semiconducting metal oxides as gas sensing materials, including the gas sensing mechanism, and modification methods for sensing materials, while also providing a comprehensive introduction to semiconductor gas sensing devices. As an essential part of IoT (Internet of things), gas sensors have shown great significance and promising prospects. Therefore, studies on functional mesoporous metal oxides, one of the most important gas sensing materials based on their unique Knudsen diffusion behavior and tailored pore structure, have increasingly attracted attention from various disciplines. The book offers a valuable reference guide to metal oxide gas sensing materials for undergraduate and graduate students alike. It will also benefit all researchers who are involved in synthesis and gas sensing of metal oxides nanomaterials with relevant frontier theories and concepts. Engineers working on research and development of semiconductor gas sensors will also find some new ideas for sensor design.

Download or read book Gas Sensors written by Sher Bahadar Khan and published by BoD – Books on Demand. This book was released on 2020-03-25 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the applications of nanomaterials in the fabrication of gas sensors. It covers recent developments of different materials used to design gas sensors, such as conducting polymers, semiconductors, as well as layered and nanosized materials. The widespread applications of various gas sensors for the detection of toxic gases are also discussed. The book provides a concise but thorough coverage of nanomaterials applications and utilization in gas sensors. In addition, it overviews recent developments in and the fabrication of gas sensors and their attributes for a broad audience, including beginners, graduate students, and specialists in both academic and industrial sectors.