Download or read book Comparison of Life Theories for Rolling element Bearings written by and published by . This book was released on 1995 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rolling Bearing Life Prediction Theory and Application written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-05-23 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: A tutorial is presented outlining the evolution, theory, and application of rolling-element bearing life prediction from that of A. Palmgren, 1924; W. Weibull, 1939; G. Lundberg and A. Palmgren, 1947 and 1952; E. Ioannides and T. Harris, 1985; and E. Zaretsky, 1987. Comparisons are made between these life models. The Ioannides-Harris model without a fatigue limit is identical to the Lundberg-Palmgren model. The Weibull model is similar to that of Zaretsky if the exponents are chosen to be identical. Both the load-life and Hertz stress-life relations of Weibull, Lundberg and Palmgren, and Ioannides and Harris reflect a strong dependence on the Weibull slope. The Zaretsky model decouples the dependence of the critical shear stress-life relation from the Weibull slope. This results in a nominal variation of the Hertz stress-life exponent. For 9th- and 8th-power Hertz stress-life exponents for ball and roller bearings, respectively, the Lundberg-Palmgren model best predicts life. However, for 12th- and 10th-power relations reflected by modern bearing steels, the Zaretsky model based on the Weibull equation is superior. Under the range of stresses examined, the use of a fatigue limit would suggest that (for most operating conditions under which a rolling-element bearing will operate) the bearing will not fail from classical rolling-element fatigue. Realistically, this is not the case. The use of a fatigue limit will significantly overpredict life over a range of normal operating Hertz stresses. (The use of ISO 281:2007 with a fatigue limit in these calculations would result in a bearing life approaching infinity.) Since the predicted lives of rolling-element bearings are high, the problem can become one of undersizing a bearing for a particular application. Rules had been developed to distinguish and compare predicted lives with those actually obtained. Based upon field and test results of 51 ball and roller bearing sets, 98 percent of these bearing sets had acceptable l
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Rolling Bearing Life Prediction Past Present and Future written by and published by . This book was released on 2000 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bearing Steels written by J. J. C. Hoo and published by ASTM International. This book was released on 1975 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Determination of Rolling Element Fatigue Life From Computer Generated Bearing Tests written by and published by . This book was released on 2003 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ball and Roller Bearing Engineering written by Arvid Palmgren and published by . This book was released on 1959 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1974 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA Technical Note written by and published by . This book was released on 1977 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bearing Steels written by J. J. C. Hoo and published by ASTM International. This book was released on 1998 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of a November 1996 conference in New Orleans, update previous information and present new materials and processing relating to steel for the anti-friction bearing industry. Among other subjects, they cover steel cleanliness and measuring methods, bearing fatigue life, advanced steel
Download or read book Bearing Steel Technology written by John M. Beswick and published by ASTM International. This book was released on 2002 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: Just as sushi can be made with any kind of rice, so bearings can be made with any kind of steel, but the discerning can tell the difference, and will not be back for seconds. Here 34 papers from an international symposium in Phoenix look at developments in the process for making steel suitable for b
Download or read book The 17th International Conference Interdisciplinarity in Engineering written by Liviu Moldovan and published by Springer Nature. This book was released on with total page 605 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tribological Research and Design for Engineering Systems written by D. Dowson and published by Elsevier. This book was released on 2003-07-17 with total page 941 pages. Available in PDF, EPUB and Kindle. Book excerpt: These papers represent the proceedings from the 29th Leeds-Lyon Symposium on Tribology, 'Tribological Research and Design for Engineering Systems' which was held in September 2002. Over 130 delegates from 18 countries attended the symposium, and the extensive discussions generated over 150 written questions and responses, which are documented at the end of this proceedings volume. There have been many advances in the field of tribology in recent years, with progress being made in the engineering and interaction of surfaces; micro and nano-tribology; elastohydrodynamics; surface films; surface texture; tribochemistry; wear and life prediction; with both experimental and theoretical contributions. These advances were reviewed, and the impact of this understanding on the fundamentals upon total engineering activity in design, manufacture and machine operation were considered. Readership: Scientists and researchers in the field of tribology.
Download or read book Rolling Bearing Analysis 2 Volume Set written by Tedric A. Harris and published by CRC Press. This book was released on 2006-11-02 with total page 763 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the last four decades, Tedric Harris' Rolling Bearing Analysis has been the "bible" for engineers involved in rolling bearing technology. Why do so many students and practicing engineers rely on this book? The answer is simple: because of its complete coverage from low- to high-speed applications and full derivations of the underlying mathematics from a leader in the field. Updated, revamped, and reorganized for the new millennium, the fifth incarnation of this classic reference is the most modern, flexible, and interactive tool in the field. What makes this edition so revolutionary? For starters, the coverage is split conveniently into two books: Essential Concepts of Bearing Technology introduces the fundamentals involved in the use, design, and performance of rolling bearings for more common applications; Advanced Concepts of Bearing Technology delves into more advanced topics involving more dynamic loading, more extreme conditions, and higher-speed applications. Furthermore, each book in this edition includes a CD-ROM that contains numerical examples as well as tables of dimensional, mounting, and life-rating data obtained from ABMA/ANSI standards. Whether you are interested in the mathematics behind the empirical values or methods for estimating the effects of complex stresses on fatigue endurance, Rolling Bearing Analysis, Fifth Edition compiles the techniques and the data that you need in a single, authoritative resource.
Download or read book Handbook of Lubrication and Tribology Volume II written by Robert W. Bruce and published by CRC Press. This book was released on 2012-07-06 with total page 1139 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of the best-selling first edition, the growing price and environmental cost of energy have increased the significance of tribology. Handbook of Lubrication and Tribology, Volume II: Theory and Design, Second Edition demonstrates how the principles of tribology can address cost savings, energy conservation, and environmental pr
Download or read book Handbook of Lubrication and Tribology written by Robert W. Bruce and published by CRC Press. This book was released on 2012-07-06 with total page 1173 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of the best-selling first edition, the growing price and environmental cost of energy have increased the significance of tribology. Handbook of Lubrication and Tribology, Volume II: Theory and Design, Second Edition demonstrates how the principles of tribology can address cost savings, energy conservation, and environmental protection. This second edition provides a thorough treatment of established knowledge and practices, along with detailed references for further study. Written by the foremost experts in the field, the book is divided into four sections. The first reviews the basic principles of tribology, wear mechanisms, and modes of lubrication. The second section covers the full range of lubricants/coolants, including mineral oil, synthetic fluids, and water-based fluids. In the third section, the contributors describe many wear- and friction-reducing materials and treatments, which are currently the fastest growing areas of tribology, with announcements of new coatings, better performance, and new vendors being made every month. The final section presents components, equipment, and designs commonly found in tribological systems. It also examines specific industrial areas and their processes. Sponsored by the Society of Tribologists and Lubrication Engineers, this handbook incorporates up-to-date, peer-reviewed information for tackling tribological problems and improving lubricants and tribological systems. The book shows how the proper use of generally accepted tribological practices can save money, conserve energy, and protect the environment.
Download or read book Advanced Dynamics of Rolling Elements written by P.K. Gupta and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: In any rotating machinery system, the bearing has traditionally been a crit ical member of the entire system, since it is the component that permits the relative motion between the stationary and moving parts. Depending on the application, a number of different bearing types have been used, such as oil-lubricated hydrodynamic bearings, gas bearings, magnetic suspensions, rolling element bearings, etc. Hydrodynamic bearings can provide any desired load support, but they are limited in stiffness and the associated power loss may be quite large. Gas bearings are used for high-precision applications where the supported loads are relatively light, bearing power losses are very low, and the rotating speeds generally high. For super precision components where no frictional dissipation or bearing power loss can be tolerated, magnetic suspensions are employed; again, the load support requirements are very low. Rolling element bearings have been widely used for those applications that require greater bearing versatility, due to the requirements for high-load and high-stiffness characteristics, while allowing moderate power loss and permitting variable speeds. A study of the dynamic interaction of rolling elements is, therefore, the subject of this text. Texts covering the analysis and design methodology of rolling elements are very limited. Notable works include Analysis of Stresses and Deflections (Jones, 1946, Vols. I and II), Ball and Roller Bearings, Their Theory, Design and Application (Eschmann, Hasbargen, and Weigand, 1958), Ball and Roller Bearing Engineering (Palmgren, 1959, 3rd ed. ), Advanced Bearing Technology (Bisson and Anderson, 1965), and Rolling Bearing Analysis (Harris, 1966).
