Download or read book NBS Building Science Series written by and published by . This book was released on 1974 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Soil Mechanics Fundamentals written by Isao Ishibashi and published by CRC Press. This book was released on 2010-12-14 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: While many introductory texts on soil mechanics are available, most are either lacking in their explanations of soil behavior or provide far too much information without cogent organization. More significantly, few of those texts go beyond memorization of equations and numbers to provide a practical understanding of why and how soil mechanics work. Based on the authors’ more than 25 years of teaching soil mechanics to engineering students, Soil Mechanics Fundamentals presents a comprehensive introduction to soil mechanics, with emphasis on the engineering significance of what soil is, how it behaves, and why it behaves that way. Concise, yet thorough, the text is organized incrementally, with earlier sections serving as the foundation for more advanced topics. Explaining the varied behavior of soils through mathematics, physics and chemistry, the text covers: Engineering behavior of clays Unified and AASHTO soil classification systems Compaction techniques, water flow and effective stress Stress increments in soil mass and settlement problems Mohr’s Circle application to soil mechanics and shear strength Lateral earth pressure and bearing capacity theories Each chapter is accompanied by example and practicing problems that encourage readers to apply learned concepts to applications with a full understanding of soil behavior fundamentals. With this text, engineering professionals as well as students can confidently determine logical and innovative solutions to challenging situations.

Download or read book Construction and Urban Planning written by Yong Huang and published by Trans Tech Publications Ltd. This book was released on 2013-03-11 with total page 3480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book cover current research results in “Construction and Urban Planning” and is divided into 18 chapters, including Geological and Geotechnical Engineering, Structural Engineering, Bridge Engineering, Tunnel, Subway and Underground Facilities, Road and Railway Engineering, Seismic Engineering, Computational Mechanics, Traditional Construction Materials, Advanced Construction Materials, Energy-Efficient Technologies in Buildings, Architectural Design and Its Theory, Architectural Environment and Ecological Environmental Protection etc. This book will not only provide the readers a broad overview of the latest advances but also provide the researchers a valuable summary and reference in this field. Volume is indexed by Thomson Reuters CPCI-S (WoS).

Download or read book Smart Geotechnics for Smart Societies written by Askar Zhussupbekov and published by CRC Press. This book was released on 2023-08-04 with total page 4162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Geotechnics for Smart Societies contains the contributions presented at the 17th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering (17th ARC, Astana, Kazakhstan, 14-18 August, 2023). The topics covered include: - Geomaterials for soil improvement - Tunneling and rock engineering - Slope, embankments and dams - Shallow and deep foundations - Soil dynamics and geotechnical earthquake engineering - Geoenvironmental engineering and frost geotechnics - Investigation of foundations of historical structures and monitoring - Offshore, harbor geotechnics and GeoEnergy - Megaprojects and transportation geotechnics Smart Geotechnics for Smart Societies will be of interest to academics and engineers interested or involved in geotechnical engineering.

Download or read book Sustainable Smart Manufacturing Processes in Industry 4 0 written by Ramesh Kumar and published by CRC Press. This book was released on 2023-10-13 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: The text discusses both theoretical and technological aspects of the Industry 4.0–based manufacturing processes. It covers important topics such as additive manufacturing, laser-based manufacturing processes, electromagnetic welding and joining processes, green manufacturing processes, and friction welding processes. Illustrates sustainable manufacturing aspects in robotics and aerospace industries. Showcases additive manufacturing processes with a focus on innovation and automation. Covers environment-friendly manufacturing processes resulting in zero waste and conserves natural resources. Synergizes exploration related to the various properties and functionalities through extensive theoretical and experimental modeling. Discusses impact welding for joining of dissimilar materials. The text discusses the recent manufacturing techniques and methodologies such as impact welding for joining of dissimilar materials. It further covers techniques such as additive manufacturing and electromagnetic manu- facturing, resulting in minimum or negligible waste. The text elaborates important topics such as friction stir welding energy consumption analysis, and industry waste recycling for sustainable development. It will serve as an ideal reference text for senior undergraduate, graduate students, and researchers in the fields including mechanical engineering, aerospace engineering, manufacturing engineering, and production engineering.

Download or read book The Pneumatic Flow Mixing Method written by Masaki Kitazume and published by CRC Press. This book was released on 2016-11-03 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: The pneumatic flow mixing method was developed to stabilize dredged soil and surplus soil for promoting their beneficial use in 1999. The pneumatic flow mixing method is a new type of the ex-situ cement stabilization techniques, in which dredged soil and surplus soil is mixed with a relatively small amount of chemical binder without any mixing paddles and blades in a pipeline. When a relatively large amount of compressed air is injected into the pipeline, soil can be separated into small blocks. When binder is injected into the pipeline, the soil block and binder are thoroughly mixed by means of turbulent flow generated in the soil block during transporting. As this method has many benefits − rapid and large scale execution can be conducted with low cost − it has been applied to many land reclamation projects, backfilling behind earth retaining wall projects and shallow stabilization projects using dredged soils and surplus soils. The Pneumatic Flow Mixing Method is a useful reference tool for engineers and researchers involved in admixture stabilization technology everywhere, regardless of local soil conditions and a variety in applications.

Download or read book Tunnels and Underground Cities Engineering and Innovation Meet Archaeology Architecture and Art written by Daniele Peila and published by CRC Press. This book was released on 2019-04-17 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tunnels and Underground Cities: Engineering and Innovation meet Archaeology, Architecture and Art contains the contributions presented at the World Tunnel Congress 2019 (Naples, Italy, 3-9 May 2019). The use of underground space is continuing to grow, due to global urbanization, public demand for efficient transportation, and energy saving, production and distribution. The growing need for space at ground level, along with its continuous value increase and the challenges of energy saving and achieving sustainable development objectives, demand greater and better use of the underground space to ensure that it supports sustainable, resilient and more liveable cities. This vision was the source of inspiration for the design of the logos of both the International (ITA) and Italian (SIG) Tunnelling Association. By placing key infrastructures underground – the black circle in the logos – it will be possible to preserve and enhance the quality of the space at ground level – the green line. In order to consider and value underground space usage together with human and social needs, engineers, architects, and artists will have to learn to collaborate and develop an interdisciplinary design approach that addresses functionality, safety, aesthetics and quality of life, and adaptability to future and varied functions. The 700 contributions cover a wide range of topics, from more traditional subjects connected to technical challenges of design and construction of underground works, with emphasis on innovation in tunneling engineering, to less conventional and archetypically Italian themes such as archaeology, architecture, and art. The book has the following main themes: Archaeology, Architecture and Art in underground construction; Environment sustainability in underground construction; Geological and geotechnical knowledge and requirements for project implementation; Ground improvement in underground constructions; Innovation in underground engineering, materials and equipment; Long and deep tunnels; Public communication and awareness; Risk management, contracts and financial aspects; Safety in underground construction; Strategic use of underground space for resilient cities; Urban tunnels. Tunnels and Underground Cities: Engineering and Innovation meet Archaeology, Architecture and Art is a valuable reference text for tunneling specialists, owners, engineers, architects and others involved in underground planning, design and building around the world, and for academics who are interested in underground constructions and geotechnics.

Download or read book Development and Application of Bituminous Materials for Civil Infrastructures written by Hui Yao and published by Frontiers Media SA. This book was released on 2021-10-22 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Electrical Measuring Instruments and Measurements written by S.C. Bhargava and published by CRC Press. This book was released on 2012-12-27 with total page 1888 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, written for the benefit of engineering students and practicing engineers alike, is the culmination of the author's four decades of experience related to the subject of electrical measurements, comprising nearly 30 years of experimental research and more than 15 years of teaching at several engineering institutions. The unique feature of this book, apart from covering the syllabi of various universities, is the style of presentation of all important aspects and features of electrical measurements, with neatly and clearly drawn figures, diagrams and colour and b/w photos that illustrate details of instruments among other things, making the text easy to follow and comprehend. Enhancing the chapters are interspersed explanatory comments and, where necessary, footnotes to help better understanding of the chapter contents. Also, each chapter begins with a "recall" to link the subject matter with the related science or phenomenon and fundamental background. The first few chapters of the book comprise "Units, Dimensions and Standards"; "Electricity, Magnetism and Electromagnetism" and "Network Analysis". These topics form the basics of electrical measurements and provide a better understanding of the main topics discussed in later chapters. The last two chapters represent valuable assets of the book, and relate to (a) "Magnetic Measurements", describing many unique features not easily available elsewhere, a good study of which is essential for the design and development of most electric equipment – from motors to transformers and alternators, and (b) "Measurement of Non-electrical Quantities", dealing extensively with the measuring techniques of a number of variables that constitute an important requirement of engineering measurement practices. The book is supplemented by ten appendices covering various aspects dealing with the art and science of electrical measurement and of relevance to some of the topics in main chapters. Other useful features of the book include an elaborate chapter-by-chapter list of symbols, worked examples, exercises and quiz questions at the end of each chapter, and extensive authors' and subject index. This book will be of interest to all students taking courses in electrical measurements as a part of a B.Tech. in electrical engineering. Professionals in the field of electrical engineering will also find the book of use.

Download or read book Applied Analyses in Geotechnics written by Fethi Azizi and published by CRC Press. This book was released on 1999-09-09 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovative and state-of-the-art, using clear illustrations and numerous worked examples, this book explains core, yet highly complex, topics such as critical state modelling, centrifuge modelling, pressuremeter testing and finite element modelling. Applied Analyses in Geotechnics will enable the reader to make informed judgements about appropriate analytical parameters and allow for greater understanding of results and their implications.

Download or read book Construction of Fills written by Edward J. Monahan and published by John Wiley & Sons. This book was released on 1994-01-14 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: The compaction guide to greater profits, less hassle. Boost yourbottom line with the expert, efficient soil compaction techniquesand technological solutions in this fully updated Second Edition.This revision will provide the contractor, fill inspector, andgeotechnical engineer with greater coverage of environmentaltopics, including. * Septic system site investigation, evaluation, design, andconstruction, plus existing system renovation, repair, maintenance,and management * The latest uses of artificial fills from around the world--foamplastics, Elastizell, Geocell, Solite, and waste materials likeshredded tires and wood chips * New material and helpful case studies on the correlation ofStandard and Modified Proctor densities and a method fordetermining numerical values of bearing capacities for Proctordensities In addition to the current state of the art of fill technology,basic insights into soil behavior are provided. Innovative andpatented methods of design are presented, especially valuable foryoung practitioners and those responsible for their supervision andcontinuing education. Reviewed as "conversational," "humorous,""full of wisdom," and "practical," this unusually readable resourceis a profit-maker no construction professional can afford to dowithout.

Download or read book Constructing and Controlling Compaction of Earth Fills written by Donald W. Shanklin and published by ASTM International. This book was released on 2000 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Presents 22 papers, from the July 1999 symposium, written on the use of various standardized methods for specifying and controlling the compaction of soil for engineered constructed earth fills. Perspectives include the historical background, current state-of-the- art practices, case histories of challenging situations, concerns regarding appropriate design parameters for compaction control, and new methods to evaluate soil compaction and related qualities. Annotation copyrighted by Book News, Inc., Portland, OR.

Download or read book Bituminous Mixtures and Pavements VII written by A.F. Nikolaides and published by CRC Press. This book was released on 2019-05-24 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highway engineers are facing the challenge not only to design and construct sustainable and safe pavements properly and economically. This implies a thorough understanding of materials behaviour, their appropriate use in the continuously changing environment, and implementation of constantly improved technologies and methodologies. Bituminous Mixtures and Pavements VII contains more than 100 contributions that were presented at the 7th International Conference ‘Bituminous Mixtures and Pavements’ (7ICONFBMP, Thessaloniki, Greece 12-14 June 2019). The papers cover a wide range of topics: - Bituminous binders - Aggregates, unbound layers and subgrade - Bituminous mixtures (Hot, Warm and Cold) - Pavements (Design, Construction, Maintenance, Sustainability, Energy and environment consideration) - Pavement management - Pavement recycling - Geosynthetics - Pavement assessment, surface characteristics and safety - Posters Bituminous Mixtures and Pavements VII reflects recent advances in highway materials technology and pavement engineering, and will be of interest to academics and professionals interested or involved in these areas.

Download or read book Influence of Compaction Energy on Soil Engineering Properties written by Isaac Robert Drew and published by . This book was released on 2005 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: Strength and deformation parameters of compacted soil are known to be related to soil type and moisture content. However, little attention has been directed towards understanding the influence of compaction energy on these properties. This paper describes laboratory and field studies conducted to evaluate the relationship between soil type, soil moisture content, and compaction energy on seven cohesive soil types. In the lab, specimens were compacted with impact energy at levels of 355, 592 (standard Proctor), 987, 1643, and 2693 kJ/m3 (modified Proctor) over a wide range of moisture contents to determine dry unit weight, unconfined compressive strength and the secant (50 percent strain) stiffness. In total, 175 Proctor tests and 95 unconfined compression tests were performed. At each energy level, a soil was tested at 4 to 5 moisture contents with respect to its standard Proctor moisture range. In addition, 54 consolidated undrained triaxial tests were performed at the five energies and four moisture contents for one soil to evaluate changes in effective stress shear strength parameters. This paper summarizes the results of statistical analyses performed on all lab and field tests conducted. The models that best explain variability in dry unit weight, strength, and stiffness are presented. Models are presented individually for each soil type and also inclusive of all soils grouped together. Independent variables used in the modeling include compaction energy, moisture content, confining pressure, Atterberg limits, material passing the No. 200 sieve, and clay fraction. In addition, a new compaction model, derived from a linear rate equation, is presented and checked for validity in estimating soil dry unit weight as a function of compaction energy. Results indicate that compaction energy, combined with moisture content, is a key factor in determining soil strength and stiffness parameters. It is concluded that the strength and stability of a compacted soil cannot be assessed in terms of relative compaction alone. Instead, this research encourages the use of strength and stiffness in the design and construction phases of earthwork operations, being the true functional requirements for compaction specifications.

Download or read book Relationship of Superpave Gyratory Compaction Properties to HMA Rutting Behavior written by R. Michael Anderson and published by Transportation Research Board. This book was released on 2002 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Free Electron Lasers 2000 written by V.N. Litvinenko and published by Gulf Professional Publishing. This book was released on 2005-12-27 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 22nd International Free Electron Laser Conference and 7th FEL User Workshop were held August 13-18, 2000 at Washington Duke Inn and Golf Club in Durham, North Carolina, USA. The conference and the workshop were hosted by Duke University's Free Electron laser (FEL) Laboratory. Following tradition, the FEL prize award was announced at the banquet. The year 2000 FEL prize was awarded to three scientists propelling the limits of high power FELs: Steven Benson, Eisuke Minehara and George Neill. The conference program was comprised of traditional oral sessions on First Lasing, FEL theory, storage ring FELs, linac and high power FELs, long wavelength FELs, SASE FELs, accelerator and FEL physics and technology, and new developments and proposals. Two sessions on accelerator and FEL physics and technology reflected the emphasis on the high quality of accelerators and components for modern FELs. The breadth of the applications was presented in the workshop oral sessions on materials processing, biomedical and surgical applications, physics and chemistry as well as on instrumentation and methods for FEL applications. A special oral session was dedicated to FEL center status reports for users to learn more about the opportunities with FELs. As usual, the oral sessions were supplemented by poster sessions with in-depth discussions and communications. The FEL physicists and FEL users had excellent opportunities to interact throughout the duration of the event, culminating a Joint Sessions. The year 2000 was very successful being marked by lasing with two SASE and one storage ring short-wavelength FELs, and by the first human surgery with the use of FEL, to mention but a few. The International Program Committee and chairs of the sessions had the challenging and exciting problem of selecting invived and contributed talks for the conferences and the workshop from the influx of abstracts mentioning new results and ideas. The success of the conference was determined by these contributions. Scientists from 15 countries gave 70 talks, presented 176 posters and submitted 146 papers, which are published in the present volume of proceedings.

Download or read book Fundamentals of Geoenvironmental Engineering written by Abdel-Mohsen O. Mohamed and published by Butterworth-Heinemann. This book was released on 2017-10-31 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Geoenvironmental Engineering: Understanding Soil, Water, and Pollutant Interaction and Transport examines soil-water-pollutant interaction, including physico-chemical processes that occur when soil is exposed to various contaminants. Soil characteristics relevant to remedial techniques are explored, providing foundations for the correct process selection. Built upon the authors' extensive experience in research and practice, the book updates and expands the content to include current processes and pollutants. The book discusses propagation of soil pollution and soil characteristics relevant to remedial techniques. Practicing geotechnical and environmental engineers can apply the theory and case studies in the book directly to current projects. The book first discusses the stages of economic development and their connections to the sustainability of the environment. Subsequent chapters cover waste and its management, soil systems, soil-water and soil-pollutant interactions, subsurface transport of pollutants, role of groundwater, nano-, micro- and biologic pollutants, soil characteristics that impact pollution diffusion, and potential remediation processes like mechanical, electric, magnetic, hydraulic and dielectric permittivity of soils. - Presents a clear understanding of the propagation of pollutants in soils - Identifies the physico-chemical processes in soils - Covers emerging pollutants (nano-, micro- and biologic contaminants) - Features in-depth coverage of hydraulic, electrical, magnetic and dielectric permittivity characteristics of soils and their impact on remedial technologies