Download or read book Compact Heat Exchangers for the Process Industries written by Kenneth J. Bell and published by Begell House Publishers. This book was released on 1997 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compact Heat Exchangers (CHEs) are characterized by large heat transfer area per unit volume of exchanger, resulting in reduced space, weight, and usually reduced energy requirements and cost compared to conventional designs. The objectives of this conference were to identify existing forms of CHEs with their potential use and benefits, to identify the new forms of CHEs, and to identify and discuss barriers and critical issues preventing the broader use of CHEs for the process industry applications.
Download or read book Compact Heat Exchangers written by J.E. Hesselgreaves and published by Elsevier. This book was released on 2001-05-08 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the ideas and industrial concepts in compact heat exchanger technology that have been developed in the last 10 years or so. Historically, the development and application of compact heat exchangers and their surfaces has taken place in a piecemeal fashion in a number of rather unrelated areas, principally those of the automotive and prime mover, aerospace, cryogenic and refrigeration sectors. Much detailed technology, familiar in one sector, progressed only slowly over the boundary into another sector. This compartmentalisation was a feature both of the user industries themselves, and also of the supplier, or manufacturing industries. These barriers are now breaking down, with valuable cross-fertilisation taking place. One of the industrial sectors that is waking up to the challenges of compact heat exchangers is that broadly defined as the process sector. If there is a bias in the book, it is towards this sector. Here, in many cases, the technical challenges are severe, since high pressures and temperatures are often involved, and working fluids can be corrosive, reactive or toxic. The opportunities, however, are correspondingly high, since compacts can offer a combination of lower capital or installed cost, lower temperature differences (and hence running costs), and lower inventory. In some cases they give the opportunity for a radical re-think of the process design, by the introduction of process intensification (PI) concepts such as combining process elements in one unit. An example of this is reaction and heat exchange, which offers, among other advantages, significantly lower by-product production.To stimulate future research, the author includes coverage of hitherto neglected approaches, such as that of the Second Law (of Thermodynamics), pioneered by Bejan and co- workers. The justification for this is that there is increasing interest in life-cycle and sustainable approaches to industrial activity as a whole, often involving exergy (Second Law) analysis. Heat exchangers, being fundamental components of energy and process systems, are both savers and spenders of exergy, according to interpretation.
Download or read book Compact Heat Exchangers for Power and Process Industries written by R. K. Shah and published by . This book was released on 1992 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Efficiency in Process Technology written by P.A. Pilavachi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since 1975 the Commission has been stimulating R & D work aimed at energy saving. The conference objective was to provide an international forum for the presentation and discussion of recent R & D relevant to energy efficiency, taking into account environmental aspects, in the energy intensive process industries.
Download or read book Compact Heat Exchangers written by J.E. Hesselgreaves and published by Butterworth-Heinemann. This book was released on 2016-09-26 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compact Heat Exchangers: Selection, Design, and Operation, Second Edition, is fully revised to present the most recent and fundamental ideas and industrial concepts in compact heat exchanger technology. This complete reference compiles all aspects of theory, design rules, operational issues, and the most recent developments and technological advancements in compact heat exchangers. New to this edition is the inclusion of micro, sintered, and porous passage description and data, electronic cooling, and an introduction to convective heat transfer fundamentals. New revised content provides up-to-date coverage of industrially available exchangers, recent fouling theories, and reactor types, with summaries of off-design performance and system effects and installations issues in, for example, automobiles and aircraft. Hesselgreaves covers previously neglected approaches, such as the Second Law (of Thermodynamics), pioneered by Bejan and co-workers. The justification for this is that there is increasing interest in life-cycle and sustainable approaches to industrial activity as a whole, often involving exergy (Second Law) analysis. Heat exchangers, being fundamental components of energy and process systems, are both savers and spenders of energy, according to interpretation. Contains revised content, covering industrially available exchangers, recent fouling theories, and reactor types Includes useful comparisons throughout with conventional heat exchangers to emphasize the benefits of CPHE applications Provides a thorough system view from commissioning, operation, maintenance, and design approaches to reduce fouling and fouling factors Compiles all aspects of theory, design rules, operational issues, and the most recent developments and technological advancements in compact heat exchangers
Download or read book Compact Heat Exchangers written by Bahman Zohuri and published by Springer. This book was released on 2016-09-28 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the fundamentals and applications of compact heat exchangers in energy generation. The text focuses on their efficiency impacts on power systems, particularly emphasizing alternative energy sources such as Concentrated Solar Power and nuclear plants. The various types of compact heat exchanger surfaces and designs are given thorough consideration before the author turns his attention to describing how these compact heat exchangers can be applied to innovative plant designs, and how to conduct operational and safety analyses to optimize thermal efficiency. The book is written at an undergraduate level, but will be useful to practicing engineers and scientists as well.
Download or read book Compact Heat Exchangers for Energy Transfer Intensification written by Jiri Jaromir Klemes and published by CRC Press. This book was released on 2015-12-16 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compact Heat Exchangers for Energy Transfer Intensification: Low-Grade Heat and Fouling Mitigation provides theoretical and experimental background on heat transfer intensification in modern heat exchangers. Emphasizing applications in complex heat recovery systems for the process industries, this book:Covers various issues related to low-grade hea
Download or read book Compact Heat Exchangers and Enhancement Technology for the Process Industries written by R. K. Shah and published by Begell House Publishers. This book was released on 1999 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: The drive to minimize capital investment and improve the energy efficiency of process industry plants has led to a reassessment of the desirability and practicality of incorporating compact heat exchangers (CHEs) and heat transfer enhancement technology into process plants. This volume collects papers presented at the International Conference on Compact Heat Exchangers for the Process Industries, whose objectives were to exploit the existing forms of the CHEs and enhancement technology with their potential use and benefits, to identify new forms of the CHEs and enhancement technology, and to identify and discuss barriers and critical issues preventing the broader use of CHEs and enhancement technology.
Download or read book Compact Heat Exchangers written by John E. Hesselgreaves and published by Pergamon Press. This book was released on 2001 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the ideas and industrial concepts in compact heat exchanger technology that have been developed in the last 10 years or so. Historically, the development and application of compact heat exchangers and their surfaces has taken place in a piecemeal fashion in a number of rather unrelated areas, principally those of the automotive and prime mover, aerospace, cryogenic and refrigeration sectors. Much detailed technology, familiar in one sector, progressed only slowly over the boundary into another sector. This compartmentalisation was a feature both of the user industries themselves, and also of the supplier, or manufacturing industries. These barriers are now breaking down, with valuable cross-fertilisation taking place. One of the industrial sectors that is waking up to the challenges of compact heat exchangers is that broadly defined as the process sector. If there is a bias in the book, it is towards this sector. Here, in many cases, the technical challenges are severe, since high pressures and temperatures are often involved, and working fluids can be corrosive, reactive or toxic. The opportunities, however, are correspondingly high, since compacts can offer a combination of lower capital or installed cost, lower temperature differences (and hence running costs), and lower inventory. In some cases they give the opportunity for a radical re-think of the process design, by the introduction of process intensification (PI) concepts such as combining process elements in one unit. An example of this is reaction and heat exchange, which offers, among other advantages, significantly lower by-product production. To stimulate future research, the author includes coverage of hitherto neglected approaches, such as that of the Second Law (of Thermodynamics), pioneered by Bejan and co- workers. The justification for this is that there is increasing interest in life-cycle and sustainable approaches to industrial activity as a whole, often involving exergy (Second Law) analysis. Heat exchangers, being fundamental components of energy and process systems, are both savers and spenders of exergy, according to interpretation.
Download or read book Compact Heat Exchangers and Enhancement Technology for the Process Industries 2001 written by Ramesh K. Shah and published by Begell House Publishers. This book was released on 2001 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: With keynote papers by leading international specialists the proceedings cowers the following topics; single-phase flow and heat transfer fundamental studies, single-phase augmentation techniques, single-phase heat transfer design data and methods, single-phase heat enhexchanger development and applications, phase-change heat transfer fundamental studies, vaporization, condensationand absorpion augmentation techniques, vaporization and condensation data and methods, phase-change heat exchanger development and applications, fouling in heat exchangers.
Download or read book Compact Heat Exchangers and Enhancement Technology for the Process Industries 2003 written by Ramesh K. Shah and published by . This book was released on 2003 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes a total of 65 papers from 16 countries and is divided into the follwoing sections: Single-Phase Flow and Heat Transfer Fundamental Studies; Single-Phase Augmentation Techniques; Single-Phase Heat Transfer Design Data and Methods; Single-Phase Heat Exchanger Development and Applications; Phase-Change Heat Transfer Fundamental Studies; Condebsation and Vaporization Augmentation Techniques; Vaporization and Condensation Design Data and Methods; Phase-Change Heat Exchanger Developmet and Applications; Fouling in Heat Exchangers. These papers represent a focused attention to the use of CHEs and Enhancement Technology in the process industries and indicateenormous opportunities.
Download or read book Process Heat Transfer written by Sarit K. Das and published by Alpha Science Int'l Ltd.. This book was released on 2005 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present text is aimed at giving the students a substantial feel of the fundamentals of heat transfer applied to process industry. Though the introduction of the material is made at the undergraduate level for a first course in Process Heat Transfer', it includes enough advanced material for postgraduate courses on Process Heat Transfer' or Heat Exchangers'. The text starts with summary of single phase heat transfer. Subsequently classification, selection and basic theory of heat transfer equipment are explained. Based on this, traditional heat exchangers as well as stirred tanks are treated in detail. Special emphasis has been laid on plate type heat exchangers. The second part introduces two-phase heat transfer followed by apparatus dealing with phase change such as condensers, evaporators, reboilers and cooling towers. Finally, recent advances in process optimization through pinch technology and energy analysis along with transient response of heat exchangers are introduced. The textbook stresses on design approach.
Download or read book Heat Transfer Equipment Design written by R. K. Shah and published by CRC Press. This book was released on 1988-07-01 with total page 1104 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat Exchangers written by Sadik Kakaç and published by CRC Press. This book was released on 2002-03-14 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Researchers, practitioners, instructors, and students all welcomed the first edition of Heat Exchangers: Selection, Rating, and Thermal Design for gathering into one place the essence of the information they need-information formerly scattered throughout the literature. While retaining the basic objectives and popular features of the bestselling fi
Download or read book Compact Heat Exchangers written by William Morrow Kays and published by . This book was released on 1958 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Process Intensification written by David Reay and published by Butterworth-Heinemann. This book was released on 2013-06-05 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Intensification: Engineering for Efficiency, Sustainability and Flexibility is the first book to provide a practical working guide to understanding process intensification (PI) and developing successful PI solutions and applications in chemical process, civil, environmental, energy, pharmaceutical, biological, and biochemical systems. Process intensification is a chemical and process design approach that leads to substantially smaller, cleaner, safer, and more energy efficient process technology. It improves process flexibility, product quality, speed to market and inherent safety, with a reduced environmental footprint. This book represents a valuable resource for engineers working with leading-edge process technologies, and those involved research and development of chemical, process, environmental, pharmaceutical, and bioscience systems. No other reference covers both the technology and application of PI, addressing fundamentals, industry applications, and including a development and implementation guide Covers hot and high growth topics, including emission prevention, sustainable design, and pinch analysis World-class authors: Colin Ramshaw pioneered PI at ICI and is widely credited as the father of the technology
Download or read book Process Heat Transfer written by Robert W. Serth and published by Academic Press. This book was released on 2014-01-27 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Heat Transfer is a reference on the design and implementation of industrial heat exchangers. It provides the background needed to understand and master the commercial software packages used by professional engineers in the design and analysis of heat exchangers. This book focuses on types of heat exchangers most widely used by industry: shell-and-tube exchangers (including condensers, reboilers and vaporizers), air-cooled heat exchangers and double-pipe (hairpin) exchangers. It provides a substantial introduction to the design of heat exchanger networks using pinch technology, the most efficient strategy used to achieve optimal recovery of heat in industrial processes. Utilizes leading commercial software. Get expert HTRI Xchanger Suite guidance, tips and tricks previously available via high cost professional training sessions. Details the development of initial configuration for a heat exchanger and how to systematically modify it to obtain an efficient final design. Abundant case studies and rules of thumb, along with copious software examples, provide a complete library of reference designs and heuristics for readers to base their own designs on.
