Download or read book Compact Heat Exchangers and Enhancement Technology for the Process Industries 2003 written by Ramesh K. Shah and published by . This book was released on 2003 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes a total of 65 papers from 16 countries and is divided into the follwoing sections: Single-Phase Flow and Heat Transfer Fundamental Studies; Single-Phase Augmentation Techniques; Single-Phase Heat Transfer Design Data and Methods; Single-Phase Heat Exchanger Development and Applications; Phase-Change Heat Transfer Fundamental Studies; Condebsation and Vaporization Augmentation Techniques; Vaporization and Condensation Design Data and Methods; Phase-Change Heat Exchanger Developmet and Applications; Fouling in Heat Exchangers. These papers represent a focused attention to the use of CHEs and Enhancement Technology in the process industries and indicateenormous opportunities.
Download or read book Compact Heat Exchangers and Enhancement Technology for the Process Industries 2001 written by Ramesh K. Shah and published by Begell House Publishers. This book was released on 2001 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: With keynote papers by leading international specialists the proceedings cowers the following topics; single-phase flow and heat transfer fundamental studies, single-phase augmentation techniques, single-phase heat transfer design data and methods, single-phase heat enhexchanger development and applications, phase-change heat transfer fundamental studies, vaporization, condensationand absorpion augmentation techniques, vaporization and condensation data and methods, phase-change heat exchanger development and applications, fouling in heat exchangers.
Download or read book Compact Heat Exchangers and Enhancement Technology for the Process Industries written by R. K. Shah and published by Begell House Publishers. This book was released on 1999 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: The drive to minimize capital investment and improve the energy efficiency of process industry plants has led to a reassessment of the desirability and practicality of incorporating compact heat exchangers (CHEs) and heat transfer enhancement technology into process plants. This volume collects papers presented at the International Conference on Compact Heat Exchangers for the Process Industries, whose objectives were to exploit the existing forms of the CHEs and enhancement technology with their potential use and benefits, to identify new forms of the CHEs and enhancement technology, and to identify and discuss barriers and critical issues preventing the broader use of CHEs and enhancement technology.
Download or read book Compact Heat Exchangers written by J.E. Hesselgreaves and published by Butterworth-Heinemann. This book was released on 2016-09-26 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compact Heat Exchangers: Selection, Design, and Operation, Second Edition, is fully revised to present the most recent and fundamental ideas and industrial concepts in compact heat exchanger technology. This complete reference compiles all aspects of theory, design rules, operational issues, and the most recent developments and technological advancements in compact heat exchangers. New to this edition is the inclusion of micro, sintered, and porous passage description and data, electronic cooling, and an introduction to convective heat transfer fundamentals. New revised content provides up-to-date coverage of industrially available exchangers, recent fouling theories, and reactor types, with summaries of off-design performance and system effects and installations issues in, for example, automobiles and aircraft. Hesselgreaves covers previously neglected approaches, such as the Second Law (of Thermodynamics), pioneered by Bejan and co-workers. The justification for this is that there is increasing interest in life-cycle and sustainable approaches to industrial activity as a whole, often involving exergy (Second Law) analysis. Heat exchangers, being fundamental components of energy and process systems, are both savers and spenders of energy, according to interpretation. Contains revised content, covering industrially available exchangers, recent fouling theories, and reactor types Includes useful comparisons throughout with conventional heat exchangers to emphasize the benefits of CPHE applications Provides a thorough system view from commissioning, operation, maintenance, and design approaches to reduce fouling and fouling factors Compiles all aspects of theory, design rules, operational issues, and the most recent developments and technological advancements in compact heat exchangers
Download or read book Compact Heat Exchangers for the Process Industries written by Kenneth J. Bell and published by Begell House Publishers. This book was released on 1997 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compact Heat Exchangers (CHEs) are characterized by large heat transfer area per unit volume of exchanger, resulting in reduced space, weight, and usually reduced energy requirements and cost compared to conventional designs. The objectives of this conference were to identify existing forms of CHEs with their potential use and benefits, to identify the new forms of CHEs, and to identify and discuss barriers and critical issues preventing the broader use of CHEs for the process industry applications.
Download or read book Compact Heat Exchangers for Energy Transfer Intensification written by Jiri Jaromir Klemes and published by CRC Press. This book was released on 2015-12-16 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compact Heat Exchangers for Energy Transfer Intensification: Low-Grade Heat and Fouling Mitigation provides theoretical and experimental background on heat transfer intensification in modern heat exchangers. Emphasizing applications in complex heat recovery systems for the process industries, this book:Covers various issues related to low-grade hea
Download or read book Compact Heat Exchangers written by John E. Hesselgreaves and published by Pergamon Press. This book was released on 2001 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the ideas and industrial concepts in compact heat exchanger technology that have been developed in the last 10 years or so. Historically, the development and application of compact heat exchangers and their surfaces has taken place in a piecemeal fashion in a number of rather unrelated areas, principally those of the automotive and prime mover, aerospace, cryogenic and refrigeration sectors. Much detailed technology, familiar in one sector, progressed only slowly over the boundary into another sector. This compartmentalisation was a feature both of the user industries themselves, and also of the supplier, or manufacturing industries. These barriers are now breaking down, with valuable cross-fertilisation taking place. One of the industrial sectors that is waking up to the challenges of compact heat exchangers is that broadly defined as the process sector. If there is a bias in the book, it is towards this sector. Here, in many cases, the technical challenges are severe, since high pressures and temperatures are often involved, and working fluids can be corrosive, reactive or toxic. The opportunities, however, are correspondingly high, since compacts can offer a combination of lower capital or installed cost, lower temperature differences (and hence running costs), and lower inventory. In some cases they give the opportunity for a radical re-think of the process design, by the introduction of process intensification (PI) concepts such as combining process elements in one unit. An example of this is reaction and heat exchange, which offers, among other advantages, significantly lower by-product production. To stimulate future research, the author includes coverage of hitherto neglected approaches, such as that of the Second Law (of Thermodynamics), pioneered by Bejan and co- workers. The justification for this is that there is increasing interest in life-cycle and sustainable approaches to industrial activity as a whole, often involving exergy (Second Law) analysis. Heat exchangers, being fundamental components of energy and process systems, are both savers and spenders of exergy, according to interpretation.
Download or read book Compact Heat Exchangers for Power and Process Industries written by R. K. Shah and published by . This book was released on 1992 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Application of Compact Heat Exchangers For Combined Cycle Driven Efficiency In Next Generation Nuclear Power Plants written by Bahman Zohuri and published by Springer. This book was released on 2015-11-19 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the fundamentals of combined-cycle plants to provide background for understanding the progressive design approaches at the heart of the text Discusses the types of compact heat exchanger surfaces, suggesting novel designs that can be considered for optimal cost effectiveness and maximum energy production Undertakes the thermal analysis of these compact heat exchangers throughout the life cycle, from the design perspective through operational and safety assurance stages This book describes the quest to create novel designs for compact heat exchangers in support of emergent combined cycle nuclear plants. The text opens with a concise explanation of the fundamentals of combined cycles, describing their efficiency impacts on electrical power generation systems. It then covers the implementation of these principles in nuclear reactor power systems, focusing on the role of compact heat exchangers in the combined cycle loop and applying them to the challenges facing actual nuclear power systems. The various types of compact heat exchanger surfaces and designs are given thorough consideration before the author turns his attention to discussing current and projected reactor systems, and how the novel design of these compact heat e xchangers can be applied to innovative designs, operation and safety analyses to optimize thermal efficiency. The book is written at an undergraduate level, but will be useful to practicing engineers and scientists as well.
Download or read book Process Heat Transfer written by Robert W. Serth and published by Academic Press. This book was released on 2014-01-27 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Heat Transfer is a reference on the design and implementation of industrial heat exchangers. It provides the background needed to understand and master the commercial software packages used by professional engineers in the design and analysis of heat exchangers. This book focuses on types of heat exchangers most widely used by industry: shell-and-tube exchangers (including condensers, reboilers and vaporizers), air-cooled heat exchangers and double-pipe (hairpin) exchangers. It provides a substantial introduction to the design of heat exchanger networks using pinch technology, the most efficient strategy used to achieve optimal recovery of heat in industrial processes. Utilizes leading commercial software. Get expert HTRI Xchanger Suite guidance, tips and tricks previously available via high cost professional training sessions. Details the development of initial configuration for a heat exchanger and how to systematically modify it to obtain an efficient final design. Abundant case studies and rules of thumb, along with copious software examples, provide a complete library of reference designs and heuristics for readers to base their own designs on.
Download or read book Process Intensification written by David Reay and published by Butterworth-Heinemann. This book was released on 2013-06-05 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Intensification: Engineering for Efficiency, Sustainability and Flexibility is the first book to provide a practical working guide to understanding process intensification (PI) and developing successful PI solutions and applications in chemical process, civil, environmental, energy, pharmaceutical, biological, and biochemical systems. Process intensification is a chemical and process design approach that leads to substantially smaller, cleaner, safer, and more energy efficient process technology. It improves process flexibility, product quality, speed to market and inherent safety, with a reduced environmental footprint. This book represents a valuable resource for engineers working with leading-edge process technologies, and those involved research and development of chemical, process, environmental, pharmaceutical, and bioscience systems. No other reference covers both the technology and application of PI, addressing fundamentals, industry applications, and including a development and implementation guide Covers hot and high growth topics, including emission prevention, sustainable design, and pinch analysis World-class authors: Colin Ramshaw pioneered PI at ICI and is widely credited as the father of the technology
Download or read book Heat Exchangers written by S. M. Sohel Murshed and published by BoD – Books on Demand. This book was released on 2017-04-26 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents contributions from renowned experts addressing research and development related to the two important areas of heat exchangers, which are advanced features and applications. This book is intended to be a useful source of information for researchers, postgraduate students, academics, and engineers working in the field of heat exchangers research and development.
Download or read book Compact Heat Exchangers written by Alexander Louis London and published by CRC Press. This book was released on 1990 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat exchangers are a crucial part of aerospace, marine, cryogenic and refrigeration technology. These essays cover such topics as complicated flow arrangements, complex extended surfaces, two-phase flow and irreversibility in heat exchangers, and single-phase heat transfer.
Download or read book Heat Exchangers Principles Design and Applications written by Charles Nehme and published by Charles Nehme. This book was released on with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat Exchangers: Principles, Design, and Applications Welcome to the world of heat exchangers, where the principles of thermodynamics and fluid dynamics come together to enable efficient heat transfer in a wide range of industrial processes. Heat exchangers are fundamental devices that play a crucial role in various industries, from power generation and chemical manufacturing to HVAC systems and renewable energy applications. They are essential for optimizing energy efficiency, enhancing process performance, and promoting sustainability. This book, "Heat Exchangers: Principles, Design, and Applications," aims to provide a comprehensive understanding of heat exchangers, covering their principles, design considerations, performance analysis, industrial applications, and emerging trends. It serves as a valuable resource for students, researchers, engineers, and professionals seeking to deepen their knowledge and explore the fascinating world of heat exchangers. The book begins with a solid foundation in the fundamentals of heat transfer, introducing concepts such as conduction, convection, and radiation. It then delves into the classification and types of heat exchangers, exploring their unique characteristics, advantages, and limitations. The design and construction of heat exchangers are thoroughly discussed, highlighting the key considerations in geometry, materials, and fabrication techniques. Performance analysis and optimization of heat exchangers are explored in detail, providing insights into heat transfer enhancement methods, pressure drop calculations, and thermal efficiency evaluation. Real-world examples and case studies showcase the practical application of heat exchangers in various industries, allowing readers to understand their role in power generation, chemical processes, HVAC systems, food and beverage production, and more. The book also examines the latest advancements in heat exchanger technology, including the integration of advanced materials, nanotechnology, additive manufacturing, and intelligent systems. It explores the future trends and outlook for heat exchangers, envisioning a greener and more sustainable future through energy efficiency improvements, waste heat recovery, and integration with renewable energy systems. Maintenance, troubleshooting, and safety considerations are given due importance, emphasizing the importance of regular inspections, maintenance practices, and adherence to safety protocols to ensure optimal performance and safe operation of heat exchangers. Throughout this book, we have strived to present complex concepts in a clear and accessible manner, incorporating illustrations, diagrams, and practical examples to enhance understanding. The content is supported by the latest research and industry practices, ensuring its relevance and reliability. As the author of this book, I am grateful for the opportunity to share my knowledge and passion for heat exchangers with you. I hope that this book serves as a valuable guide, sparking your curiosity, inspiring further exploration, and enabling you to contribute to the field of heat exchangers. I encourage you to dive into the following chapters, embark on a journey through the principles, design considerations, applications, and future trends of heat exchangers. May this book equip you with the necessary knowledge and insights to tackle real-world challenges, drive innovation, and contribute to a more efficient and sustainable world. Happy reading! Charles Nehme
Download or read book Emerging Topics in Heat Transfer written by Qiuwang Wang and published by WIT Press. This book was released on 2013-11-06 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presented in ten edited chapters this book encompasses important emerging topics in heat transfer equipment, particularly heat exchangers. The chapters have all been selected by invitation only. Advances in high temperature equipment and small scale devices continue to be important as the involved heat transfer and related phenomena are often complex in nature and different mechanisms like heat conduction, convection, turbulence, thermal radiation and phase change as well as chemical reactions may occur simultaneously. The book treats various operating problems, like fouling, and highlights applications in heat exchangers and gas turbine cooling. In engineering design and development, reliable and accurate computational methods are required to replace or complement expensive and time consuming experimental trial and error work. Tremendous advancements in knowledge and competence have been achieved during recent years due to improved computational solution methods for non-linear partial differential equations, turbulence modelling advancement and developments of computers and computing algorithms to achieve efficient and rapid simulations. The chapters of the book thoroughly present such advancement in a variety of applications.
Download or read book Heat Exchangers written by Sadik Kakaç and published by CRC Press. This book was released on 2020-01-21 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents a systematic approach to heat exchangers, focusing on fundamentals and applications Provides realistic design examples to enable instructors to assign thermal design projects to students Adds new or updated coverage of gasketed, compact and microscale heat exchangers Covers both single-phase and two-phase forced convection correlations Includes Figure Slides and a complete Solutions Manual for instructor adopting the text
Download or read book Heat Exchangers written by Sadik Kakaç and published by CRC Press. This book was released on 2012-03-01 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat exchangers are essential in a wide range of engineering applications, including power plants, automobiles, airplanes, process and chemical industries, and heating, air conditioning and refrigeration systems. Revised and updated with new problem sets and examples, Heat Exchangers: Selection, Rating, and Thermal Design, Third Edition presents a systematic treatment of the various types of heat exchangers, focusing on selection, thermal-hydraulic design, and rating. Topics discussed include: Classification of heat exchangers according to different criteria Basic design methods for sizing and rating of heat exchangers Single-phase forced convection correlations in channels Pressure drop and pumping power for heat exchangers and their piping circuit Design solutions for heat exchangers subject to fouling Double-pipe heat exchanger design methods Correlations for the design of two-phase flow heat exchangers Thermal design methods and processes for shell-and-tube, compact, and gasketed-plate heat exchangers Thermal design of condensers and evaporators This third edition contains two new chapters. Micro/Nano Heat Transfer explores the thermal design fundamentals for microscale heat exchangers and the enhancement heat transfer for applications to heat exchanger design with nanofluids. It also examines single-phase forced convection correlations as well as flow friction factors for microchannel flows for heat transfer and pumping power calculations. Polymer Heat Exchangers introduces an alternative design option for applications hindered by the operating limitations of metallic heat exchangers. The appendices provide the thermophysical properties of various fluids. Each chapter contains examples illustrating thermal design methods and procedures and relevant nomenclature. End-of-chapter problems enable students to test their assimilation of the material.
