Download or read book Colorado Rockfall Simulation Program written by Timothy J. Pfeiffer and published by . This book was released on 1993 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This rockfall computer program, which simulates rocks tumbling down a slope, predicts the statistical distribution of speed and bounce height, and can be used for locating and designing rockfall mitigation. The model takes into account, slope profile, rebound and friction characteristics of the slope, and spinning energy of the rocks. Spherical, cylindrical and disk shaped rocks can be simulated. At each impact, the slope angle is randomly varied from the nominal value input by the user within the limit set by the maximum probable variation in the slope. Version 3.0 of the Colorado Rockfall Simulation Program is similar to version 2.1 in terms of the operating environment, but additional statistical output has been added and the ability to use metric units has also been added. This manual reflects version 3.0 input and output. The model is recommended as a tool for geologist[s] and engineers responsible for analyzing and mitigating rockfall hazards."--Technical report documentation page.
Download or read book Colorado Rockfall Simulation Program Users Manual for Version 2 1 written by Timothy J. Pfeiffer and published by . This book was released on 1991 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This rockfall computer program, which simulates rocks tumbling down a slope, predicts the statistical distribution of speed and bounce height, and can be used for locating and designing rockfall mitigation. The model takes into account, slope profile, rebound and friction characteristics of the slope, and spinning energy of the rocks. Both sperical and disk shaped rocks can be simulated. At each impact, the slope angle is randomly varied from the nominal value input by the user within the limit set by the maximum probable variation in the slope. This Colorado Rockfall Simulation Program revision -- Version 2.1 -- has the identical source code as the original cited in Report No. CDOH-DTD-ED3/CSM-89-2, but data inputs and graphic outputs have been revised by Rick Schultz of CDOT to create a more user friendly environment. This manual reflects version 2.1 input and output.
Download or read book Rock Fall Engineering written by Duncan C. Wyllie and published by CRC Press. This book was released on 2014-09-24 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock falls can be a public safety issue. This book provides comprehensive information on identification of these hazards, and design and construction of protection methods.Rock Fall Engineering describes first, the theoretical background to rock fall behavior in terms of the impact and trajectory phases of rock falls, and second, how this informati
Download or read book Analytical Simulation of Rockfall Prevention Fence Structures written by Graham G. W. Mustoe and published by . This book was released on 1993 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geological Monitoring written by Rob Young and published by Geological Society of America. This book was released on 2009 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Geologic Monitoring is a practical, nontechnical guide for land managers, educators, and the public that synthesizes representative methods for monitoring short-term and long-term change in geologic features and landscapes. A prestigious group of subject-matter experts has carefully selected methods for monitoring sand dunes, caves and karst, rivers, geothermal features, glaciers, nearshore marine features, beaches and marshes, paleontological resources, permafrost, seismic activity, slope movements, and volcanic features and processes. Each chapter has an overview of the resource; summarizes features that could be monitored; describes methods for monitoring each feature ranging from low-cost, low-technology methods (that could be used for school groups) to higher cost, detailed monitoring methods requiring a high level of expertise; and presents one or more targeted case studies."--Publisher's description.
Download or read book Numerical Methods in Geotechnical Engineering IX Volume 1 written by Manuel de Matos Fernandes and published by CRC Press. This book was released on 2018-06-22 with total page 935 pages. Available in PDF, EPUB and Kindle. Book excerpt: NUMGE 2018 is the ninth in a series of conferences on Numerical Methods in Geotechnical Engineering organized by the ERTC7 under the auspices of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE). The first conference was held in 1986 in Stuttgart, Germany and the series continued every four years (1990 Santander, Spain; 1994 Manchester, United Kingdom; 1998 Udine, Italy; 2002 Paris, France; 2006 Graz, Austria; 2010 Trondheim, Norway; 2014 Delft, The Netherlands). The conference provides a forum for exchange of ideas and discussion on topics related to numerical modelling in geotechnical engineering. Both senior and young researchers, as well as scientists and engineers from Europe and overseas, are invited to attend this conference to share and exchange their knowledge and experiences. This work is the first volume of NUMGE 2018.
Download or read book Seasonal Monitoring Program Instrumentation Demonstration Delta Colorado written by Ahmad Ardani and published by . This book was released on 1993 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical Methods in Geotechnical Engineering IX written by António S. Cardoso and published by CRC Press. This book was released on 2018-06-19 with total page 1656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Methods in Geotechnical Engineering IX contains 204 technical and scientific papers presented at the 9th European Conference on Numerical Methods in Geotechnical Engineering (NUMGE2018, Porto, Portugal, 25—27 June 2018). The papers cover a wide range of topics in the field of computational geotechnics, providing an overview of recent developments on scientific achievements, innovations and engineering applications related to or employing numerical methods. They deal with subjects from emerging research to engineering practice, and are grouped under the following themes: Constitutive modelling and numerical implementation Finite element, discrete element and other numerical methods. Coupling of diverse methods Reliability and probability analysis Large deformation – large strain analysis Artificial intelligence and neural networks Ground flow, thermal and coupled analysis Earthquake engineering, soil dynamics and soil-structure interactions Rock mechanics Application of numerical methods in the context of the Eurocodes Shallow and deep foundations Slopes and cuts Supported excavations and retaining walls Embankments and dams Tunnels and caverns (and pipelines) Ground improvement and reinforcement Offshore geotechnical engineering Propagation of vibrations Following the objectives of previous eight thematic conferences, (1986 Stuttgart, Germany; 1990 Santander, Spain; 1994 Manchester, United Kingdom; 1998 Udine, Italy; 2002 Paris, France; 2006 Graz, Austria; 2010 Trondheim, Norway; 2014 Delft, The Netherlands), Numerical Methods in Geotechnical Engineering IX updates the state-of-the-art regarding the application of numerical methods in geotechnics, both in a scientific perspective and in what concerns its application for solving practical boundary value problems. The book will be much of interest to engineers, academics and professionals involved or interested in Geotechnical Engineering.
Download or read book Advancing Culture of Living with Landslides written by Matjaž Mikoš and published by Springer. This book was released on 2017-05-16 with total page 613 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains peer-reviewed papers from the Fourth World Landslide Forum organized by the International Consortium on Landslides (ICL), the Global Promotion Committee of the International Programme on Landslides (IPL), University of Ljubljana (UL) and Geological Survey of Slovenia in Ljubljana, Slovenia from May 29 to June 2, 2017. The complete collection of papers from the Forum is published in five full-color volumes. This third volume contains the following: • One keynote lecture • Landslide Monitoring and Warning: Monitoring Techniques and Technologies, • Early Warning Systems • Landslide Disasters and Relief: Case Studies, Emergency Measures, First Aid, • Civil Protection Measures • Landslide Mitigation, Remediation and Stabilization: Landslide Protection Works, • Landslide Stabilization And Remediation Measures, Landslide Non-Structural Measures Prof. Matjaž Mikoš is the Forum Chair of the Fourth World Landslide Forum. He is the Vice President of International Consortium on Landslides and President of the Slovenian National Platform for Disaster Risk Reduction. Prof. Željko Arbanas is representative of Croatian Landslide Group, member of the International Consortium on Landslides. He is the Head of Geotechnical Chair at Faculty of Civil Engineering University of Rijeka, Croatia and the Assistant Editor-in-Chief of International Journal “Landslides”.“/p> Prof. Yueping Yin is the President of the International Consortium on Landslides and the Chairman of the Committee of Geo-Hazards Prevention of China, and the Chief Geologist of Geo-Hazard Emergency Technology, Ministry of Land and Resources, P.R. China. Prof. Kyoji Sassa is the Founding President of the International Consortium on Landslides (ICL). He is Executive Director of ICL and the Editor-in-Chief of International Journal “Landslides” since its foundation in 2004. IPL (International Programme on Landslides) is a programme of the ICL. The programme is managed by the IPL Global Promotion Committee including ICL and ICL supporting organizations, UNESCO, WMO, FAO, UNISDR, UNU, ICSU, WFEO, IUGS and IUGG. The IPL contributes to the United Nations International Strategy for Disaster Reduction and the ISDR-ICL Sendai Partnerships 2015–2025.
Download or read book Industrial Communication Technology Handbook Second Edition written by Richard Zurawski and published by CRC Press. This book was released on 2014-11-07 with total page 1564 pages. Available in PDF, EPUB and Kindle. Book excerpt: Featuring contributions from major technology vendors, industry consortia, and government and private research establishments, the Industrial Communication Technology Handbook, Second Edition provides comprehensive and authoritative coverage of wire- and wireless-based specialized communication networks used in plant and factory automation, automotive applications, avionics, building automation, energy and power systems, train applications, and more. New to the Second Edition: 46 brand-new chapters and 21 substantially revised chapters Inclusion of the latest, most significant developments in specialized communication technologies and systems Addition of new application domains for specialized networks The Industrial Communication Technology Handbook, Second Edition supplies readers with a thorough understanding of the application-specific requirements for communication services and their supporting technologies. It is useful to a broad spectrum of professionals involved in the conception, design, development, standardization, and use of specialized communication networks as well as academic institutions engaged in engineering education and vocational training.
Download or read book Geology Applied to Engineering written by Terry R. West and published by Waveland Press. This book was released on 2018-03-19 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geology Applied to Engineering bridges the gap between the two fields through its versatile application of the physical aspects of geology to engineering design and construction. The Second Edition elucidates real-world practices, concerns, and issues for today’s engineering geologists and geotechnical engineers. Both undergraduate and graduate students will benefit from the book’s thorough coverage, as will professionals involved in assessing sites for engineering projects, evaluating construction materials, developing water resources, and conducting tests using industry standards. West and Shakoor offer expanded coverage of important topics such as slope stability and ground subsidence and significant fields in engineering geology, such as highways, dams, tunnels, and rock blasting. In order to allow for the diverse backgrounds of geologists and engineers, material on the properties of minerals, rocks, and soil provides a working knowledge of applied geology as a springboard to more comprehensive subjects in engineering. Example problems throughout the text demonstrate the practical applications of soil mechanics, rock weathering and soils, structural geology, groundwater, and geophysics. Thought-provoking and challenging exercises supplement core concepts such as determining shear strength and failure conditions, calculating the depth needed for borings, reading and analyzing maps, and constructing stratigraphic cross sections.
Download or read book Performance Evaluation of Various Corrosion Protection Systems of Bridges in Colorado written by Yunping Xi and published by . This book was released on 2004 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion of reinforced concrete structures has been a significant problem for many state and transportation agencies since the application of deicing salts was introduced. Much research has been conducted to develop corrosion protection systems that can prolong the life span of reinforced concrete structures. The Colorado Department of Transportation (CDOT) has several routine and experimental measures to prevent corrosion of the rebar including epoxy-coated rebar, calcium nitrite admixture, organic corrosion inhibitors, a thick cover of quality concrete, and a waterproofing membrane covered by an asphalt overlay. An extensive literature review was performed to collect information on various corrosion protection systems that have been used in the U.S. and around the world. Current CDOT practices in terms of corrosion protection measures were reviewed. A draft inspection plan for Colorado's bridge structures was proposed.
Download or read book Landslides Theory Practice and Modelling written by S.P. Pradhan and published by Springer. This book was released on 2018-06-28 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, with contributions from international landslide experts, presents in-depth knowledge of theories, practices, and modern numerical techniques for landslide analysis. Landslides are a reoccurring problem across the world and need to be properly studied for their mitigation and control. Due to increased natural and anthropogenic activities, chances of landslide occurrence and associated hazards have increased. The book focuses on landslide dynamics, mechanisms and processes along with hazard mitigation using geo-engineering, structural, geophysical and numerical tools. The book contains a wealth of the latest information on all aspects of theory, practices and modelling tools and techniques involved in prediction, prevention, monitoring, mitigation and risk analysis of landslide hazards. This book will bring the reader up to date on the latest trends in landslide studies and will help planners, engineers, scientists and researchers working on landslide engineering.
Download or read book Demonstration of a Volumetric Acceptance Program for Hot Mix Asphalt in Colorado written by Timothy Aschenbrener and published by . This book was released on 1994 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Avalanche Hazard Index for Colorado Highways written by Arthur I. Mears and published by . This book was released on 1995 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study conducted an inventory of existing avalanche paths along Colorado Highways. Information was collected on the size and type of each avalanche path, the historical frequency of avalanche occurrences, the number of avalanche tracks, the length of highway exposed, the volume of traffic on the road, the traffic peak characteristics, the speed of traffic and the consequences of an avalanche encounter with a vehicle. This information was used to generate an Avalanche Hazard Index (AHI) for Colorado Highways. The concept of the AHI has been used in the past as a quantitative measure of the avalanche hazard to traffic. The AHI values calculated in this study are considered relative values and can be used to compare the hazards of particular avalanche paths or avalanche prone routes in Colorado.
Download or read book Landslides and Engineered Slopes Experience Theory and Practice written by Stefano Aversa and published by CRC Press. This book was released on 2018-04-17 with total page 2224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Landslides and Engineered Slopes. Experience, Theory and Practice contains the invited lectures and all papers presented at the 12th International Symposium on Landslides, (Naples, Italy, 12-19 June 2016). The book aims to emphasize the relationship between landslides and other natural hazards. Hence, three of the main sessions focus on Volcanic-induced landslides, Earthquake-induced landslides and Weather-induced landslides respectively, while the fourth main session deals with Human-induced landslides. Some papers presented in a special session devoted to "Subareal and submarine landslide processes and hazard” and in a “Young Session” complete the books. Landslides and Engineered Slopes. Experience, Theory and Practice underlines the importance of the classic approach of modern science, which moves from experience to theory, as the basic instrument to study landslides. Experience is the key to understand the natural phenomena focusing on all the factors that play a major role. Theory is the instrument to manage the data provided by experience following a mathematical approach; this allows not only to clarify the nature and the deep causes of phenomena but mostly, to predict future and, if required, manage similar events. Practical benefits from the results of theory to protect people and man-made works. Landslides and Engineered Slopes. Experience, Theory and Practice is useful to scientists and practitioners working in the areas of rock and soil mechanics, geotechnical engineering, engineering geology and geology.
Download or read book Expansive Soil Treatment Methods in Colorado written by Ahmad Ardani and published by . This book was released on 1992 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt:
