Download or read book Cold Spray Technology written by Anatolii Papyrin and published by Elsevier. This book was released on 2006-10-04 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topic of this book is Cold Spray technology. Cold Spray is a process of applying coatings by exposing a metallic or dielectric substrate to a high velocity (300 to 1200 m/s) jet of small (1 to 50 μm) particles accelerated by a supersonic jet of compressed gas. This process is based on the selection of the combination of particle temperature, velocity, and size that allows spraying at the lowest temperature possible. In the Cold Spray process, powder particles are accelerated by the supersonic gas jet at a temperature that is always lower than the melting point of the material, resulting in coating formation from particles in the solid state. As a consequence, the deleterious effects of high-temperature oxidation, evaporation, melting, crystallization, residual stresses, gas release, and other common problems for traditional thermal spray methods are minimized or eliminated. This book is the first of its kind on the Cold Spray process. Cold Spray Technology covers a wide spectrum of various aspects of the Cold Spray technology, including gas-dynamics, physics of interaction of high-speed solid particles with a substrate as well as equipment, technologies, and applications. Cold Spray Technology includes the results of more than 20 years of original studies (1984-2005) conducted at the Institute of Theoretical and Applied Mechanics of the Siberian Division of the Russian Academy of Science, as well as the results of studies conducted at most of the research centres around the world. The authors' goal is threefold. The first goal is to explain basic principles and advantages of the Cold Spray process. The second goal is, to give practical information on technologies and equipment. The third goal is to present the current state of research and development in this field over the world. The book provides coverage and data that will be of interest for users of Cold Spray technology as well as for other coating experts. At the present time the Cold Spray method is recognized by world leading scientists and specialists. A wide spectrum of research is being conducted at many research centres and companies in many countries. New approach to spray coatings Results are exceptionally pure coatings Low spray temperature without degradation of powder and substrate materials High productivity, high deposition efficiency High operational safety because of absence of high temperature gas jets, radiation and explosive gases Excellent thermal and electrical conductivity Wide spectrum of applications because of important advantages of the process
Download or read book Modern Cold Spray written by Julio Villafuerte and published by Springer. This book was released on 2015-08-24 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the current state of the art of the novel cold spray process. Cold spray is a solid state metal consolidation process, which allows engineers to tailor surface and shape properties by optimizing process parameters, powder characteristics and substrate conditions for a wide variety of applications that are difficult or impossible by other techniques. Readers will benefit from this book's coverage of the commercial evolution of cold spray since the 1980's and will gain a practical understanding of what the technology has to offer.
Download or read book High Pressure Cold Spray written by C. M. Kay and published by . This book was released on 2016-06 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a highly practical and useful ""go-to"" resource that presents an in-depth look at the high pressure cold spray process and describes applications in various industries. Cold spray continues to be the fastest developing spray technology over the last decade, and a significant number of scientists, engineers, and technologists are joining the cold spray community around the globe. The technology is relatively young and work is being simultaneously pursued in universities, research centers, and in many high tech industries. As this novel technology spreads quickly into many new application areas, there is a large need for an authoritative source of information. This new book addresses this need and will be indispensable to universities, libraries, and those involved in thermal spray. It presents baseline information on design and modeling, materials science of engineered coatings, and specific applications in various high tech industries, and is also a hands-on resource for cold spray operators.
Download or read book Cold Spray Coatings written by Pasquale Cavaliere and published by Springer. This book was released on 2017-11-08 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book combines the contributions of experts in the field to describe the behavior of various materials, micromechanisms involved during processing, and the optimization of cold-spray technology. It spans production, characterization, and applications including wear resistance, fatigue, life improvement, thermal barriers, crack repair, and biological applications. Cold spray is an innovative coating technology based on the kinetic energy gained by particles sprayed at very high pressures. While the technique was developed in the 1990s, industrial and scientific interest in this technology has grown vastly in the last ten years. Recently, many interesting applications have been associated with cold-sprayed coatings, including wear resistance, fatigue life improvement, thermal barriers, biological applications, and crack repair. However, many fundamental aspects require clarification and description.
Download or read book The Cold Spray Materials Deposition Process written by and published by Elsevier. This book was released on 2007-09-21 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: The cold spray process produces dense, low oxide coatings which can be used in such diverse applications as corrosion control and metals repair. It has emerged as an important alternative to thermal spray coating techniques in certain areas. This pioneering book reviews both the fundamentals of the process and how it can best be applied in practice. The first part of the book discusses the development of the process together with its advantages and disadvantages in comparison with thermal spray coating techniques. Part two reviews key process parameters such as powders, nozzle design, particle temperature and velocity, and particle/substrate interaction. It also describes portable and stationary cold spray systems. The final part of the book discusses how the cold spray process can be applied in such areas as improved wear, corrosion protection, electromagnetic interference shielding and repair of damaged components. The cold spray materials deposition process is a standard reference on this important process and its industrial applications. Examines the fundamentals of the cold spraying process Assesses how the technique can best be applied in practice Describes portable and stationary cold spray systems
Download or read book Cold Spray in the Realm of Additive Manufacturing written by Sunil Pathak and published by Springer Nature. This book was released on 2020-05-12 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book sheds light on the development of the cold spray process in applications of additive manufacturing (AM) and repair/remanufacturing engineering. It covers the process fundamentals of different cold spray techniques, namely low pressure cold spray and high pressure cold spray process. Bonding mechanism and powder substrate interface are an important part of the book. The chapters present the recent developments in materials used in cold spraying for AM and various coating applications. The latest research in this area as well as possible avenues of future research are also highlighted as a way to encourage the researchers.
Download or read book Handbook of Thermal Spray Technology written by Joseph R. Davis and published by ASM International. This book was released on 2004-01-01 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference covers principles, processes, types of coatings, applications, performance, and testing and analysis of thermal spray technology. It will serve as an introduction and guide for those new to thermal spray, and as a reference for specifiers and users of thermal spray coatings and thermal spray experts. Coverage encompasses basics of th
Download or read book Advanced Surface Coating Techniques for Modern Industrial Applications written by Roy, Supriyo and published by IGI Global. This book was released on 2020-09-18 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: In engineering, there are often situations in which the material of the main component is unable to sustain long life or protect itself from adverse operating environments. Moreover, in some cases, different material properties such as anti-friction and wear, anti-corrosive, thermal resistive, super hydrophobic, etc. are required as per the operating conditions. If those bulk components are made of such materials and possess those properties, the cost will be very high. In such cases, a practical solution is surface coating, which serves as a protective barrier to the bulk material from the adverse environment. In the last decade, with enormous effort, researchers and scientists have developed suitable materials to overcome those unfavorable operating conditions, and they have used advanced deposition techniques to enhance the adhesion and surface texturing of the coatings. Advanced Surface Coating Techniques for Modern Industrial Applications is a highly sought reference source that compiles the recent research trends in these new and emerging surface coating materials, deposition techniques, properties of coated materials, and their applications in various engineering and industrial fields. The book particularly focuses on 1) coating materials including anti-corrosive materials and nanomaterials, 2) coating methods including thermal spray and electroless disposition, and 3) applications such as surface engineering and thin film application. The book is ideal for engineers, scientists, researchers, academicians, and students working in fields like material science, mechanical engineering, tribology, chemical and corrosion science, bio-medical engineering, biomaterials, and aerospace engineering.
Download or read book Cold Gas Dynamic Spray written by Roman Gr. Maev and published by CRC Press. This book was released on 2016-04-27 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Your Guide to Advanced Cold Spray TechnologyCold Gas Dynamic Spray centers on cold gas dynamic spray (or cold spray-CS) technology, one of the most versatile thermal spray coating methods in materials engineering, and effectively describes and analyzes the main trends and developments behind the spray (coating) techniques. The book combines theory
Download or read book Thermal Spray Coatings written by Lalit Thakur and published by CRC Press. This book was released on 2021-11-04 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the latest information about the research being conducted and established solutions available in the field of thermal spray coatings for various engineering applications. The readers of this book will be mainly the graduates, engineers and researchers who are pursuing their carrier in the field of thermal spraying. This book will cover the studies and research works of reputed scientists and engineers who have developed thermal spray coatings for thermal protection, bio-implants, renewal energy, wear and corrosion in hydraulic turbines and jet engines, hydrophobic surfaces etc. Hence, the book serves as a valuable resource of latest advancement in thermal spray technology and consolidated references for aspirants and professionals of surface engineering community. The book covers following topics for different industrial applications: Introduction: Historical developments, Science and Engineering aspects of thermal spray coating technology and different thermal spray coatings techniques and its comparison with other fabrication processes. Recent advancements and applications of thermal spray coatings Cold spray technology for additive manufacturing. High-temperature corrosion and erosion resistant coatings and thermal barrier coatings for power plants, automotive sector, and jet engines. Erosion and corrosion-resistant coatings for hydro-power plants, offshore, chemical and oil industries. Bio-coatings for human body implants. Thermal spray coating for super-hydrophobic surface. 3. Case study of boiler tubes failure and prevention by thermal spray coatings.
Download or read book Future Development of Thermal Spray Coatings written by Nuria Espallargas and published by Elsevier. This book was released on 2015-06-29 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Future Development of Thermal Spray Coatings discusses the latest developments and research trends in the thermal spray industry. The book presents a timely guide to new applications and techniques. After an introduction to thermal spray coatings by the editor, Part One covers new types and properties of thermal spray coatings. Chapters look at feedstock suspensions and solutions, the application of solution precursor spray techniques to obtain ceramic films and coatings, cold spray techniques and warm spray technology amongst others. Part Two of the book moves on to discuss new applications for thermal spray coatings such as the use of thermal spray coatings in environmental barrier coatings, thermal spray coatings in renewable energy applications and manufacturing engineering in thermal spray technologies by advanced robot systems and process kinematics. Timely guide on the current advancements and research trends in thermal spray technology Reviews different types of thermal spray coatings Presents a wide variety of applications for this emerging technology
Download or read book Thermal Spray Fundamentals written by Pierre L. Fauchais and published by Springer Science & Business Media. This book was released on 2014-01-24 with total page 1587 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with the fundamentals necessary for understanding thermal spray technology. Coverage includes in-depth discussions of various thermal spray processes, feedstock materials, particle-jet interactions, and associated yet very critical topics: diagnostics, current and emerging applications, surface science, and pre and post-treatment. This book will serve as an invaluable resource as a textbook for graduate courses in the field and as an exhaustive reference for professionals involved in thermal spray technology.
Download or read book The Science and Engineering of Thermal Spray Coatings written by Lech Pawlowski and published by John Wiley & Sons. This book was released on 2008-04-30 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: This extensively updated and revised version builds on the success of the first edition featuring new discoveries in powder technology, spraying techniques, new coatings applications and testing techniques for coatings -- Many new spray techniques are considered that did not exist when the first edition was published! The book begins with coverage of materials used, pre-spray treatment, and the techniques used. It then leads into the physics and chemistry of spraying and discusses coatings build-up. Characterization methods and the properties of the applied coatings are presented, and the book concludes with a lengthy chapters on thermal spray applications covers such areas as the aeronautics and space, automobiles, ceramics, chemicals, civil engineering, decorative coatings, electronics, energy generation and transport, iron and steel, medicine, mining and the nuclear industries.
Download or read book Aircraft Sustainment and Repair written by Rhys Jones and published by Butterworth-Heinemann. This book was released on 2017-12-15 with total page 970 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aircraft Sustainment and Repair is a one-stop-shop for practitioners and researchers in the field of aircraft sustainment, adhesively bonded aircraft joints, bonded composites repairs, and the application of cold spray to military and civil aircraft. Outlining the state-of-the-art in aircraft sustainment, this book covers the use of quantitative fractography to determine the in-service crack length versus flight hours curve, the effect of intergranular cracking on structural integrity and the structural significance of corrosion. The book additionally illustrates the potential of composite repairs and SPD applications to metallic airframes. Covers corrosion damage assessment and management in aircraft structures Includes a key chapter on U.S. developments in the emerging field of supersonic particle deposition (SPD) Shows how to design and assess the potential benefits of both bonded composite repairs and SPD repairs to metallic aircraft structures to meet the damage tolerance requirements inherent in FAA ac 20-107b and the U.S. Joint Services
Download or read book Cold Spray Additive Manufacturing written by Shuo Yin and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book systematically describes the status quo and future development of cold spray additive manufacturing technology. It starts with a comprehensive introduction to the fundamentals of cold spray additive manufacturing, including its history, working principle, equipment, processing parameters and powder feedstock. It then discusses the fundamentals of and the latest developments in the gas flow character, particle acceleration, particle deposition and bond mechanism from the perspectives of both experiments and modelling to provide readers with insights into the cold spray additive manufacturing process. Further, it explores microstructure and properties, which are major concerns in the context of cold sprayed deposits. The book also highlights the strengthening strategies for cold sprayed deposits, from pre- and in-process to post-treatment. Lastly, it examines the current and potential applications of cold spray additive manufacturing.
Download or read book Modern Surface Technology written by Friedrich-Wilhelm Bach and published by John Wiley & Sons. This book was released on 2006-12-13 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This translation of a successful German title provides a broad and fundamental overview of current coating technology. Edited by experts from one of the largest research centers for this field in Germany, this valuable reference combines research and industrial perspectives, treated by authors from academia and industry alike. They discuss the potential of the many innovations introduced into industrial application in recent years, allowing materials scientists and engineers to find the appropriate solution for their own specific coating problems. Thus, with the aid of this book, it is possible to make coating technology an integral part of R&D, construction and production.
Download or read book Practical Cold Spray written by Victor Kenneth Champagne Jr. and published by Springer. This book was released on 2022-06-20 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a detailed explanation of the cold spray process from a practical standpoint. Drawing on the authors’ 36 years of research and development experience, it is firmly rooted in theory but also substantiated by empirical data and practical knowledge, offering potential users the information they need to recognize the advantages, as well as the limitations, of cold spray. This sets it apart from previous works on the subject, which have been purely academic. Cold spray technology has made great dramatic strides over the last 10 years and is now being used extensively in the aerospace, electronics, automotive, medical, and even the petrochemical industries. Most recently, cold spray of near-net shaped parts was accomplished – something previously assumed to be impossible because of the limitations of commercially available cold spray systems and a lack of fundamental understanding regarding the process. The cost of cold spray has also declined, making it appealing to industry through the introduction of new powders, surface preparation techniques, and recovery systems tailored to the cold spray process. Though primarily intended for users of the technology, this handbook is also a valuable resource for researchers interested in advances in cold spray materials, improved feedstock powders, advanced hardware and software development, surface preparation techniques, and the numerous applications developed to date. For example, cold spray aluminum alloys have been developed that offer the strength and ductility of wrought material in the as-sprayed condition. This has yet to be achieved by conventional powder consolidation methods including laser sintering, electron beam, and ultrasonic techniques. Other topics covered include additive manufacturing, structural repair, nondestructive evaluation, advanced cold spray materials, qualification requirements, cold spray systems comparison, and, finally, helium recovery. Thanks to its practical focus, the book provides readers with everything they need to understand, evaluate, and implement cold spray technology.
