Download or read book Coiled Tubing and Other Stimulation Techniques written by Mohammed Ismail Iqbal and published by CRC Press. This book was released on 2022-09-01 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Good engineers never stop looking for opportunities to improve the performance of their production systems. Performance enhancement methods are always carefully examined, and production data is analyzed in order to identify determining factors affecting performance.The two main activities of the production engineer in the petroleum and related industries are reservoir stimulation and artificial lift. The classic solution to maximizing a well's productivity is to stimulate it. The basis for selecting stimulation candidates should be a review of the well's actual and theoretical IPR. Low permeability wells often need fracturing on initial completion. In low permeability zones, additional post stimulation production can be significant to the economics, however, the production engineer needs to make management aware of the true long term potential or else overly optimistic projections can easily be made.The main purpose of stimulation is to enhance the property value by the faster delivery of the petroleum fluid and/or to increase ultimate economic recovery. The aim of reservoir stimulation is to bypass near-wellbore damage and return a well to its “natural” productivity / injectivity, to extend a conductive path deep into a formation and thus increase productivity beyond the natural level and to produce hydrocarbon from tight formation.The importance of reservoir stimulation is increasing due to following reasons: • Hydrocarbon fields in their mid-life• Production in these fields are in declining trend• The thrust area: Enhancement of productionHence, to improve productivity of the well matrix stimulation and hydraulic fracturing are intended to remedy, or even improve, the natural connection of the wellbore with the reservoir, which could delay the need for artificial lift.This book presents procedures taken in the Oil & Gas Industry for identifying well problems, and it suggests means of solving problems with the help of the Coil Tube unit which is used for improving well productivity and techniques like Acidizing and Hydraulic Fracturing.
Download or read book Acid Stimulation written by Carl T. Montgomery and published by . This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive and up-to-the-minute presentation on acid stimulation technology.
Download or read book Well Control for Completions and Interventions written by Howard Crumpton and published by Gulf Professional Publishing. This book was released on 2018-04-04 with total page 826 pages. Available in PDF, EPUB and Kindle. Book excerpt: Well Control for Completions and Interventions explores the standards that ensure safe and efficient production flow, well integrity and well control for oil rigs, focusing on the post-Macondo environment where tighter regulations and new standards are in place worldwide. Too many training facilities currently focus only on the drilling side of the well’s cycle when teaching well control, hence the need for this informative guide on the topic. This long-awaited manual for engineers and managers involved in the well completion and intervention side of a well’s life covers the fundamentals of design, equipment and completion fluids. In addition, the book covers more important and distinguishing components, such as well barriers and integrity envelopes, well kill methods specific to well completion, and other forms of operations that involve completion, like pumping and stimulation (including hydraulic fracturing and shale), coiled tubing, wireline, and subsea intervention. Provides a training guide focused on well completion and intervention Includes coverage of subsea and fracturing operations Presents proper well kill procedures Allows readers to quickly get up-to-speed on today’s regulations post-Macondo for well integrity, barrier management and other critical operation components
Download or read book Abrasive Water Jet Perforation and Multi Stage Fracturing written by Zhongwei Huang and published by Gulf Professional Publishing. This book was released on 2017-10-19 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abrasive Water Jet Perforation and Multi-Stage Fracturing gives petroleum engineers, well completion managers and fracturing specialists a critical guide to understanding all the details of the technology including materials, tools, design methods and field applications. The exploitation and development of unconventional oil and gas resources has continued to gain importance, and multi-stage fracturing with abrasive water jets has emerged as one of the top three principal methods to recover unconventional oil and gas, yet there is no one collective reference to explain the fundamentals, operations and influence this method can deliver. The book introduces current challenges and gives solutions for the problems encountered. Packed with references and real-world examples, the book equips engineers and specialists with a necessary reservoir stimulation tool to better understand today’s fracturing technology. Provides understanding of the fundamentals, design and application of water jet perforation Examines the pressure boosting assembly in all phases including initiation, hydraulic isolation and production stage Evaluates production analysis, pump pressure predictions and the latest design software Introduces current challenges and gives solutions for the problems encountered
Download or read book Advanced Well Completion Engineering written by Wan Renpu and published by Gulf Professional Publishing. This book was released on 2011-08-23 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: Once a natural gas or oil well is drilled, and it has been verified that commercially viable, it must be "completed" to allow for the flow of petroleum or natural gas out of the formation and up to the surface. This process includes: casing, pressure and temperature evaluation, and the proper instillation of equipment to ensure an efficient flow out of the well. In recent years, these processes have been greatly enhanced by new technologies. Advanced Well Completion Engineering summarizes and explains these advances while providing expert advice for deploying these new breakthrough engineering systems. The book has two themes: one, the idea of preventing damage, and preventing formation from drilling into an oil formation to putting the well introduction stage; and two, the utilization of nodal system analysis method, which optimizes the pressure distribution from reservoir to well head, and plays the sensitivity analysis to design the tubing diameters first and then the production casing size, so as to achieve whole system optimization. With this book, drilling and production engineers should be able to improve operational efficiency by applying the latest state of the art technology in all facets of well completion during development drilling-completion and work over operations. One of the only books devoted to the key technologies for all major aspects of advanced well completion activities. Unique coverage of all aspects of well completion activities based on 25 years in the exploration, production and completion industry. Matchless in-depth technical advice for achieving operational excellence with advance solutions.
Download or read book Unconventional Reservoir Geomechanics written by Mark D. Zoback and published by Cambridge University Press. This book was released on 2019-05-16 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of the key geologic, geomechanical and engineering principles that govern the development of unconventional oil and gas reservoirs. Covering hydrocarbon-bearing formations, horizontal drilling, reservoir seismology and environmental impacts, this is an invaluable resource for geologists, geophysicists and reservoir engineers.
Download or read book Coil tubing unit for oil production and remedial measures written by Mohammed Ismail Iqbal and published by CRC Press. This book was released on 2022-09-01 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Well activation is one of the most important aspects in the oil and gas industries and nitrogen gas is predominately used. The gas, being light, is sent down the producing reservoir which will enhance the production or improve the flow of crude oil. In addition to the methods used to increase production there are several problems like sand production and water production from the producing wells. Sand production occurs when the destabilizing stresses at the formation face exceed the strength of the natural arching tendencies and/or grain-to-grain cementation strength. Ideally, during oil production, the formation should be porous, permeable and well consolidated through which hydrocarbons can easily flow into the production wells. But sometimes, especially during production from unconsolidated sandstone reservoirs, the produced hydrocarbons may also carry large amounts of sand into the well bore and sand entering production wells is one of the oldest problems faced by oil companies and one of the toughest to solve. These unconsolidated formations may not restrain grain movement, and produce sand along with the fluids especially at high rates. Water production is also a problem that many reservoir or production engineers face in day-to-day life. As engineers we should be able to decide whether water control solutions should be applied or not. The excess production of water is caused by the depletion of the reservoir and simply sweeps away most of the oil that the reservoir can produce. This book gives an information how well activation using nitrogen is carried out, and how sand control and water control issues can be resolved.
Download or read book Hydraulic Fracturing Chemicals and Fluids Technology written by Johannes Fink and published by Gulf Professional Publishing. This book was released on 2013-08-14 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: When classifying fracturing fluids and their additives, it is important that production, operation, and completion engineers understand which chemical should be utilized in different well environments. A user's guide to the many chemicals and chemical additives used in hydraulic fracturing operations, Hydraulic Fracturing Chemicals and Fluids Technology provides an easy-to-use manual to create fluid formulations that will meet project-specific needs while protecting the environment and the life of the well. Fink creates a concise and comprehensive reference that enables the engineer to logically select and use the appropriate chemicals on any hydraulic fracturing job. The first book devoted entirely to hydraulic fracturing chemicals, Fink eliminates the guesswork so the engineer can select the best chemicals needed on the job while providing the best protection for the well, workers and environment. Pinpoints the specific compounds used in any given fracturing operation Provides a systematic approach to classifying fracturing fluid technology to meet specific project needs Eliminates guesswork with easy-to-understand language on selection and components of hydraulic fracturing chemicals Addresses environmental aspects of chemicals to safeguard employees and protect the environment
Download or read book Well Completion Design written by Jonathan Bellarby and published by Elsevier. This book was released on 2009-04-13 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completions are the conduit between hydrocarbon reservoirs and surface facilities. They are a fundamental part of any hydrocarbon field development project. The have to be designed for safely maximising the hydrocarbon recovery from the well and may have to last for many years under ever changing conditions. Issues include: connection with the reservoir rock, avoiding sand production, selecting the correct interval, pumps and other forms of artificial lift, safety and integrity, equipment selection and installation and future well interventions. * Course book based on course well completion design by TRACS International * Unique in its field: Coverage of offshore, subsea, and landbased completions in all of the major hydrocarbon basins of the world. * Full colour
Download or read book Reservoir Stimulation written by Michael J. Economides and published by . This book was released on 2000-06-23 with total page 910 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sets forth a rationalisation of stimulation using reservoir engineering concepts, and addresses topics such as formation characterisation, hydraulic fracturing and matrix acidizing. Formation damage, which refers to a loss in reservoir productivity, is also examined comprehensively.
Download or read book Giant Micelles written by Raoul Zana and published by CRC Press. This book was released on 2007-05-30 with total page 639 pages. Available in PDF, EPUB and Kindle. Book excerpt: The co-evolution of a strong theoretical framework alongside application of a range of sophisticated experimental tools engendered rapid advancement in the study ofgiant micelles. Beginning with Anacker and Debye's 1951 experimental study of elongated micelles by light scattering and their subsequent theoretical inference that the thermodynamic
Download or read book Our Energy Future written by and published by . This book was released on 1991 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Operational Aspects of Oil and Gas Well Testing written by S. McAleese and published by Elsevier. This book was released on 2000-03-10 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Well Testing is recognised by many operating oil and gas companies to be the most hazardous operation they routinely undertake. Therefore, it is of great importance that such operations are extremely well planned and executed.This handbook covers all the major "Operational Aspects of Oil and Gas Well Testing" and uses a structured approach to guide the reader through the steps required to safely and effectively plan a well test operation under just about any circumstances world wide.Safety procedures and well testing recommended practices are rigorously addressed in this book, as are the responsibilities of those persons involved in well testing operations. Perforating equipment, drill stem test equipment and bottom hole pressure gauges are discussed in detail in the book. There is also a very valuable section on sub sea equipment, an area often not well understood even by experienced engineers who may have been primarily involved with land or jackup rigs. A major part of the book is the detailed coverage of the equipment and instrumentation that makes up a surface well testing package. It also covers operational and testing related problems such as, hydrates, wax and sand, and offers the reader some possible solutions. There are useful chapters on sampling, onsite chemistry, coil tubing and nitrogen operations and basic stimulation as they relate to well testing. Finally there is an extensive section of appendices covering useful engineering calculations and there is a complete example of a detailed well testing programme.
Download or read book Offshore Well Completion and Stimulation written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2019-06-08 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt: While the public is generally aware of the use of hydraulic fracturing for unconventional resource development onshore, it is less familiar with the well completion and stimulation technologies used in offshore operations, including hydraulic fracturing, gravel packs, "fracpacks," and acid stimulation. Just as onshore technologies have improved, these well completion and stimulation technologies for offshore hydrocarbon resource development have progressed over many decades. To increase public understanding of these technologies, the National Academies of Sciences, Engineering, and Medicine established a planning committee to organize and convene a workshop on Offshore Well Completion and Stimulation: Using Hydraulic Fracturing and Other Technologies on October 2-3, 2017, in Washington, DC. This workshop examined the unique features about operating in the U.S. offshore environment, including well completion and stimulation technologies, environmental considerations and concerns, and health and safety management. Participants from across government, industry, academia, and nonprofit sectors shared their perspectives on operational and regulatory approaches to mitigating risks to the environment and to humans in the development of offshore resources. This publication summarizes the presentations and discussions from the workshop.
Download or read book Petroleum Engineer s Guide to Oil Field Chemicals and Fluids written by Johannes Fink and published by Gulf Professional Publishing. This book was released on 2011-05-13 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum Engineer's Guide to Oil Field Chemicals and Fluids is a comprehensive manual that provides end users with information about oil field chemicals, such as drilling muds, corrosion and scale inhibitors, gelling agents and bacterial control. This book is an extension and update of Oil Field Chemicals published in 2003, and it presents a compilation of materials from literature and patents, arranged according to applications and the way a typical job is practiced. The text is composed of 23 chapters that cover oil field chemicals arranged according to their use. Each chapter follows a uniform template, starting with a brief overview of the chemical followed by reviews, monomers, polymerization, and fabrication. The different aspects of application, including safety and environmental impacts, for each chemical are also discussed throughout the chapters. The text also includes handy indices for trade names, acronyms and chemicals. Petroleum, production, drilling, completion, and operations engineers and managers will find this book invaluable for project management and production. Non-experts and students in petroleum engineering will also find this reference useful. Chemicals are ordered by use including drilling muds, corrosion inhibitors, and bacteria control Includes cutting edge chemicals and polymers such as water soluble polymers and viscosity control Handy index of chemical substances as well as a general chemical index
Download or read book Fiscal Year 2001 Budget Authorization Request written by United States. Congress. House. Committee on Science. Subcommittee on Energy and Environment and published by . This book was released on 2001 with total page 1114 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Department of Energy s Fiscal Year 1997 Budget Request for Energy Efficiency and Renewable Energy and Fossil Energy Programs written by United States. Congress. House. Committee on Science. Subcommittee on Energy and Environment and published by . This book was released on 1997 with total page 1538 pages. Available in PDF, EPUB and Kindle. Book excerpt:
