Download or read book Code Generation for Embedded Processors written by Peter Marwedel and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern electronics is driven by the explosive growth of digital communications and multi-media technology. A basic challenge is to design first-time-right complex digital systems, that meet stringent constraints on performance and power dissipation. In order to combine this growing system complexity with an increasingly short time-to-market, new system design technologies are emerging based on the paradigm of embedded programmable processors. This concept introduces modularity, flexibility and re-use in the electronic system design process. However, its success will critically depend on the availability of efficient and reliable CAD tools to design, programme and verify the functionality of embedded processors. Recently, new research efforts emerged on the edge between software compilation and hardware synthesis, to develop high-quality code generation tools for embedded processors. Code Generation for Embedded Systems provides a survey of these new developments. Although not limited to these targets, the main emphasis is on code generation for modern DSP processors. Important themes covered by the book include: the scope of general purpose versus application-specific processors, machine code quality for embedded applications, retargetability of the code generation process, machine description formalisms, and code generation methodologies. Code Generation for Embedded Systems is the essential introduction to this fast developing field of research for students, researchers, and practitioners alike.
Download or read book Code Generation and Optimization for Embedded Processors written by M. Milan and published by . This book was released on 2002 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Code Optimization Techniques for Embedded Processors written by Rainer Leupers and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: The building blocks of today's and future embedded systems are complex intellectual property components, or cores, many of which are programmable processors. Traditionally, these embedded processors mostly have been pro grammed in assembly languages due to efficiency reasons. This implies time consuming programming, extensive debugging, and low code portability. The requirements of short time-to-market and dependability of embedded systems are obviously much better met by using high-level language (e.g. C) compil ers instead of assembly. However, the use of C compilers frequently incurs a code quality overhead as compared to manually written assembly programs. Due to the need for efficient embedded systems, this overhead must be very low in order to make compilers useful in practice. In turn, this requires new compiler techniques that take the specific constraints in embedded system de sign into account. An example are the specialized architectures of recent DSP and multimedia processors, which are not yet sufficiently exploited by existing compilers.
Download or read book Code Generation and Optimization for Embedded Digital Signal Processors written by Stan Yi-Huang Liao and published by . This book was released on 1996 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Source Code Optimization Techniques for Data Flow Dominated Embedded Software written by Heiko Falk and published by Springer Science & Business Media. This book was released on 2013-03-19 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on source-to-source code transformations that remove addressing-related overhead present in most multimedia or signal processing application programs. This approach is complementary to existing compiler technology. What is particularly attractive about the transformation flow pre sented here is that its behavior is nearly independent of the target processor platform and the underlying compiler. Hence, the different source code trans formations developed here lead to impressive performance improvements on most existing processor architecture styles, ranging from RISCs like ARM7 or MIPS over Superscalars like Intel-Pentium, PowerPC, DEC-Alpha, Sun and HP, to VLIW DSPs like TI C6x and Philips TriMedia. The source code did not have to be modified between processors to obtain these results. Apart from the performance improvements, the estimated energy is also significantly reduced for a given application run. These results were not obtained for academic codes but for realistic and rep resentative applications, all selected from the multimedia domain. That shows the industrial relevance and importance of this research. At the same time, the scientific novelty and quality of the contributions have lead to several excellent papers that have been published in internationally renowned conferences like e. g. DATE. This book is hence of interest for academic researchers, both because of the overall description of the methodology and related work context and for the detailed descriptions of the compilation techniques and algorithms.
Download or read book Proceedings of the 11th International Workshop on Software Compilers for Embedded Systems written by Heiko Falk and published by . This book was released on 2008 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Software and Compilers for Embedded Systems written by Andreas Krall and published by Springer. This book was released on 2003-10-24 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the 7th International Workshop on Software and Compilers for Embedded Systems, SCOPES 2003, held in Vienna, Austria, September 24–26, 2003. Initially, the workshop was referred to as the International Workshop on Code Generation for Embedded Systems. The ?rst workshop took place in 1994 in Schloss Dagstuhl, Germany. From its beg- nings, the intention of the organizers was to create an atmosphere in which the researcherscould participateactively in dynamic discussionsand pro?t from the assembly of international experts in the ?eld. It was at the fourth workshop, in St. Goar, Germany, in 1999, that the spectrum of topics of interest for the workshop was extended, and not only code generation, but also software and compilers for embedded systems, were considered. The change in ?elds of interest led to a change of name, and this is when the present name was used for the ?rst time. Since then, SCOPES has been held again in St. Goar, Germany, in 2001; Berlin, Germany, in 2002; and this year, 2003, in Vienna, Austria. In response to the call for papers, 43 very strong papers from all over the world were submitted. The program committee selected 26 papers for pres- tation at SCOPES 2003. All submitted papers were reviewed by at least three experts in order to ensure the quality of the work presented at the workshop.
Download or read book Proceedingsof the 10th International Workshop on Software Compilers for Embedded Systems written by Heiko Falk and published by . This book was released on 2007 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Retargetable Compiler Technology for Embedded Systems written by Rainer Leupers and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is well known that embedded systems have to be implemented efficiently. This requires that processors optimized for certain application domains are used in embedded systems. Such an optimization requires a careful exploration of the design space, including a detailed study of cost/performance tradeoffs. In order to avoid time-consuming assembly language programming during design space exploration, compilers are needed. In order to analyze the effect of various software or hardware configurations on the performance, retargetable compilers are needed that can generate code for numerous different potential hardware configurations. This book provides a comprehensive and up-to-date overview of the fast developing area of retargetable compilers for embedded systems. It describes a large set important tools as well as applications of retargetable compilers at different levels in the design flow. Retargetable Compiler Technology for Embedded Systems is mostly self-contained and requires only fundamental knowledge in software and compiler design. It is intended to be a key reference for researchers and designers working on software, compilers, and processor optimization for embedded systems.
Download or read book The Compiler Design Handbook written by Y.N. Srikant and published by CRC Press. This book was released on 2002-09-25 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: The widespread use of object-oriented languages and Internet security concerns are just the beginning. Add embedded systems, multiple memory banks, highly pipelined units operating in parallel, and a host of other advances and it becomes clear that current and future computer architectures pose immense challenges to compiler designers-challenges th
Download or read book The Compiler Design Handbook written by Y.N. Srikant and published by CRC Press. This book was released on 2018-10-03 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today’s embedded devices and sensor networks are becoming more and more sophisticated, requiring more efficient and highly flexible compilers. Engineers are discovering that many of the compilers in use today are ill-suited to meet the demands of more advanced computer architectures. Updated to include the latest techniques, The Compiler Design Handbook, Second Edition offers a unique opportunity for designers and researchers to update their knowledge, refine their skills, and prepare for emerging innovations. The completely revised handbook includes 14 new chapters addressing topics such as worst case execution time estimation, garbage collection, and energy aware compilation. The editors take special care to consider the growing proliferation of embedded devices, as well as the need for efficient techniques to debug faulty code. New contributors provide additional insight to chapters on register allocation, software pipelining, instruction scheduling, and type systems. Written by top researchers and designers from around the world, The Compiler Design Handbook, Second Edition gives designers the opportunity to incorporate and develop innovative techniques for optimization and code generation.
Download or read book Compilers for Code Size Optimization on Embedded Processors written by 王孟婷 and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Improved Code Optimization Techniques for Embedded Processors written by Sunil R. Atri and published by . This book was released on 1999 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Code Optimization for Embedded Systems written by and published by . This book was released on 2003 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: This project investigated a number of problems that arise in compiling application code for embedded systems. These systems present the compiler with a number of challenges that arise from economic constraints, physical constraints, and idiosyncratic requirements of the application and processors. The project developed new techniques in optimization and code generation that addressed problems including code size reduction, instruction scheduling, data placement (on partitioned register set machines), spill code reduction, and operator strength reduction. It also produced fundamental work on transformation ordering.
Download or read book Software Engineering for Embedded Systems written by Robert Oshana and published by Elsevier Inc. Chapters. This book was released on 2013-04-01 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: Code optimization is a critical step in the development process as it directly impacts the ability of the system to do its intended job. Code that executes faster means more channels, more work performed and competitive advantage. Code that executes in less memory enables more application features to fit into the cell phone. Code that executes with less overall power consumption increases battery life or reduces money spent on powering a base station. This chapter is intended to help programmers write the most efficient code possible, whether that is measured in processor cycles, memory, or power. It starts with an introduction to using the tool chain, covers the importance of knowing the embedded architecture before optimization, then moves on to cover a wide range of optimization techniques. Techniques are presented which are valid on all programmable architectures – C-language optimization techniques and general loop transformations. Real-world examples are presented throughout.
Download or read book Worst Case Execution Time Aware Compilation Techniques for Real Time Systems written by Paul Lokuciejewski and published by Springer Science & Business Media. This book was released on 2010-09-24 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: For real-time systems, the worst-case execution time (WCET) is the key objective to be considered. Traditionally, code for real-time systems is generated without taking this objective into account and the WCET is computed only after code generation. Worst-Case Execution Time Aware Compilation Techniques for Real-Time Systems presents the first comprehensive approach integrating WCET considerations into the code generation process. Based on the proposed reconciliation between a compiler and a timing analyzer, a wide range of novel optimization techniques is provided. Among others, the techniques cover source code and assembly level optimizations, exploit machine learning techniques and address the design of modern systems that have to meet multiple objectives. Using these optimizations, the WCET of real-time applications can be reduced by about 30% to 45% on the average. This opens opportunities for decreasing clock speeds, costs and energy consumption of embedded processors. The proposed techniques can be used for all types real-time systems, including automotive and avionics IT systems.
Download or read book Software and Compilers for Embedded Systems written by Henk Schepers and published by Springer Science & Business Media. This book was released on 2004-08-23 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 8th International Workshop on Software and Compilers for Embedded Systems, SCOPES 2004, held in Amsterdam, The Netherlands, in September 2004. The 17 revised full papers presented were carefully reviewed and selected from close to 50 submissions. The papers are organized in topical sections on application synthesis, data flow analysis, data partitioning, task scheduling, and code generation.
