Download or read book Coal Power Plant Materials and Life Assessment written by A. Shibli and published by Elsevier. This book was released on 2014-07-24 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to their continuing role in electricity generation, it is important that coal power plants operate as efficiently and cleanly as possible. Coal Power Plant Materials and Life Assessment reviews the materials used in coal plants, and how they can be assessed and managed to optimize plant operation. Part I considers the structural alloys used in coal plants. Part II then reviews performance modelling and life assessment techniques, explains the inspection and life-management approaches that can be adopted to optimize long term plant operation, and considers the technical and economic issues involved in meeting variable energy demands. Summarizes key research on coal-fired power plant materials, their behavior under operational loads, and approaches to life assessment and defect management Details the range of structural alloys used in coal power plants, and the life assessment techniques applicable to defect-free components under operational loads Reviews the life assessment techniques applicable to components containing defects and the approaches that can be adopted to optimize plant operation and new plant and component design
Download or read book Ultra Supercritical Coal Power Plants written by Dongke Zhang FTSE and published by Elsevier. This book was released on 2013-08-31 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: The continued use of coal as a means of generating electricity and an increasing demand for cleaner, more efficient energy production has led to advances in power plant technology. Ultra-supercritical coal power plants reviews the engineering, operation, materials and performance of ultra-supercritical coal power plants. Following a chapter introducing advanced and ultra-supercritical coal power plants, part one goes on to explore the operating environments, materials and engineering of ultra-supercritical coal power plants. Chapters discuss the impacts of steam conditions on plant materials and operation, fuel considerations and burner design, and materials and design for boilers working under supercritical steam conditions. Chapters in part two focus on improving ultra-supercritical coal power plant performance and operability. Ash fouling, deposition and slagging in ultra-supercritical coal power plants are highlighted along with pollution control measures and the estimation, management and extension of the life of ultra-supercritical power plants. Further chapters provide an economic and engineering analysis of a 700°C advanced ultra-supercritical pulverised coal power plant and discuss CO2 capture-ready ultra-supercritical coal power plants. Ultra-supercritical coal power plants is a comprehensive technical reference for power plant operators and engineers, high-temperature materials scientists, professionals in the power industry who require an understanding of ultra-supercritical coal power plants and researchers and academics interested in the field. Provides a comprehensive reference on the developments, materials, design and operation of ultra-supercritical power plant Considers the degradation issues affecting this type of plant, as well as emissions control and CO2 capture technology; improved plant controls critical to improved operation and environmental performance Contains operational assessments for plant safety, plant life management, and plant economics
Download or read book The Power of Renewables written by Chinese Academy of Engineering and published by National Academies Press. This book was released on 2011-01-29 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: The United States and China are the world's top two energy consumers and, as of 2010, the two largest economies. Consequently, they have a decisive role to play in the world's clean energy future. Both countries are also motivated by related goals, namely diversified energy portfolios, job creation, energy security, and pollution reduction, making renewable energy development an important strategy with wide-ranging implications. Given the size of their energy markets, any substantial progress the two countries make in advancing use of renewable energy will provide global benefits, in terms of enhanced technological understanding, reduced costs through expanded deployment, and reduced greenhouse gas (GHG) emissions relative to conventional generation from fossil fuels. Within this context, the U.S. National Academies, in collaboration with the Chinese Academy of Sciences (CAS) and Chinese Academy of Engineering (CAE), reviewed renewable energy development and deployment in the two countries, to highlight prospects for collaboration across the research to deployment chain and to suggest strategies which would promote more rapid and economical attainment of renewable energy goals. Main findings and concerning renewable resource assessments, technology development, environmental impacts, market infrastructure, among others, are presented. Specific recommendations have been limited to those judged to be most likely to accelerate the pace of deployment, increase cost-competitiveness, or shape the future market for renewable energy. The recommendations presented here are also pragmatic and achievable.
Download or read book Power Plant Life Management and Performance Improvement written by John E Oakey and published by Elsevier. This book was released on 2011-09-28 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coal- and gas-based power plants currently supply the largest proportion of the world’s power generation capacity, and are required to operate to increasingly stringent environmental standards. Higher temperature combustion is therefore being adopted to improve plant efficiency and to maintain net power output given the energy penalty that integration of advanced emissions control systems cause. However, such operating regimes also serve to intensify degradation mechanisms within power plant systems, potentially affecting their reliability and lifespan.Power plant life management and performance improvement critically reviews the fundamental degradation mechanisms that affect conventional power plant systems and components, as well as examining the operation and maintenance approaches and advanced plant rejuvenation and retrofit options that the industry are applying to ensure overall plant performance improvement and life management.Part one initially reviews plant operation issues, including fuel flexibility, condition monitoring and performance assessment. Parts two, three and four focus on coal boiler plant, gas turbine plant, and steam boiler and turbine plant respectively, reviewing environmental degradation mechanisms affecting plant components and their mitigation via advances in materials selection and life management approaches, such as repair, refurbishment and upgrade. Finally, part five reviews issues relevant to the performance management and improvement of advanced heat exchangers and power plant welds.With its distinguished editor and international team of contributors, Power plant life management and performance improvement is an essential reference for power plant operators, industrial engineers and metallurgists, and researchers interested in this important field. Provides an overview of the improvements to plant efficiency in coal- and gas-based power plants Critically reviews the fundamental degradation mechanisms that affect conventional power plant systems and components, noting mitigation routes alongside monitoring and assessment methods Addresses plant operation issues including fuel flexibility, condition monitoring and performance assessment
Download or read book Damage Mechanisms and Life Assessment of High Temperature Components written by Ramaswamy Viswanathan and published by ASM International. This book was released on 1989 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials Ageing and Degradation in Light Water Reactors written by K L Murty and published by Elsevier. This book was released on 2013-02-18 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: Light water reactors (LWRs) are the predominant class of nuclear power reactors in operation today; however, ageing and degradation can influence both their performance and lifetime. Knowledge of these factors is therefore critical to safe, continuous operation. Materials ageing and degradation in light water reactors provides a comprehensive guide to prevalent deterioration mechanisms, and the approaches used to handle their effects.Part one introduces fundamental ageing issues and degradation mechanisms. Beginning with an overview of ageing and degradation issues in LWRs, the book goes on to discuss corrosion in pressurized water reactors and creep deformation of materials in LWRs. Part two then considers materials’ ageing and degradation in specific LWR components. Applications of zirconium alloys in LWRs are discussed, along with the ageing of electric cables. Materials management strategies for LWRs are then the focus of part three. Materials management strategies for pressurized water reactors and VVER reactors are considered before the book concludes with a discussion of materials-related problems faced by LWR operators and corresponding research needs.With its distinguished editor and international team of expert contributors, Materials ageing and degradation in light water reactors is an authoritative review for anyone requiring an understanding of the performance and durability of this type of nuclear power plant, including plant operators and managers, nuclear metallurgists, governmental and regulatory safety bodies, and researchers, scientists and academics working in this area. Introduces the fundamental ageing issues and degradation mechanisms associated with this class of nuclear power reactors Considers materials ageing and degradation in specific light water reactor components, including properties, performance and inspection Chapters also focus on material management strategies
Download or read book Functional Materials for Sustainable Energy Applications written by J A Kilner and published by Elsevier. This book was released on 2012-09-28 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: Global demand for low cost, efficient and sustainable energy production is ever increasing. Driven by recent discoveries and innovation in the science and technology of materials, applications based on functional materials are becoming increasingly important. Functional materials for sustainable energy applications provides an essential guide to the development and application of these materials in sustainable energy production. Part one reviews functional materials for solar power, including silicon-based, thin-film, and dye sensitized photovoltaic solar cells, thermophotovoltaic device modelling and photoelectrochemical cells. Part two focuses on functional materials for hydrogen production and storage. Functional materials for fuel cells are then explored in part three where developments in membranes, catalysts and membrane electrode assemblies for polymer electrolyte and direct methanol fuel cells are discussed, alongside electrolytes and ion conductors, novel cathodes, anodes, thin films and proton conductors for solid oxide fuel cells. Part four considers functional materials for demand reduction and energy storage, before the book concludes in part five with an investigation into computer simulation studies of functional materials. With its distinguished editors and international team of expert contributors, Functional materials for sustainable energy applications is an indispensable tool for anyone involved in the research, development, manufacture and application of materials for sustainable energy production, including materials engineers, scientists and academics in the rapidly developing, interdisciplinary field of sustainable energy. An essential guide to the development and application of functional materials in sustainable energy production Reviews functional materials for solar power Focuses on functional materials for hydrogen production and storage, fuel cells, demand reduction and energy storage
Download or read book Materials for Ultra Supercritical and Advanced Ultra Supercritical Power Plants written by Augusto Di Gianfrancesco and published by Woodhead Publishing. This book was released on 2016-09-01 with total page 900 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials for Ultra-Supercritical and Advanced Ultra-Supercritical Power Plants provides researchers in academia and industry with an essential overview of the stronger high-temperature materials required for key process components, such as membrane wall tubes, high-pressure steam piping and headers, superheater tubes, forged rotors, cast components, and bolting and blading for steam turbines in USC power plants. Advanced materials for future advanced ultra-supercritical power plants, such as superalloys, new martensitic and austenitic steels, are also addressed. Chapters on international research directions complete the volume. The transition from conventional subcritical to supercritical thermal power plants greatly increased power generation efficiency. Now the introductions of the ultra-supercritical (USC) and, in the near future, advanced ultra-supercritical (A-USC) designs are further efforts to reduce fossil fuel consumption in power plants and the associated carbon dioxide emissions. The higher operating temperatures and pressures found in these new plant types, however, necessitate the use of advanced materials. Provides researchers in academia and industry with an authoritative and systematic overview of the stronger high-temperature materials required for both ultra-supercritical and advanced ultra-supercritical power plants Covers materials for critical components in ultra-supercritical power plants, such as boilers, rotors, and turbine blades Addresses advanced materials for future advanced ultra-supercritical power plants, such as superalloys, new martensitic and austenitic steels Includes chapters on technologies for welding technologies
Download or read book Combined Cycle Systems for Near Zero Emission Power Generation written by Ashok D Rao and published by Elsevier. This book was released on 2012-04-12 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combined cycle power plants are one of the most promising ways of improving fossil-fuel and biomass energy production. The combination of a gas and steam turbine working in tandem to produce power makes this type of plant highly efficient and allows for CO2 capture and sequestration before combustion. This book provides a comprehensive review of the design, engineering and operational issues of a range of advanced combined cycle plants. After introductory chapters on basic combined cycle power plant and advanced gas turbine design, the book reviews the main types of combined cycle system. Chapters discuss the technology, efficiency and emissions performance of natural gas-fired combined cycle (NGCC) and integrated gasification combined cycle (IGCC) as well as novel humid air cycle, oxy-combustion turbine cycle systems. The book also reviews pressurised fluidized bed combustion (PFBC), externally fired combined cycle (EFCC), hybrid fuel cell turbine (FC/GT), combined cycle and integrated solar combined cycle (ISCC) systems. The final chapter reviews techno-economic analysis of combined cycle systems. With its distinguished editor and international team of contributors, Combined cycle systems for near-zero emission power generation is a standard reference for both industry practitioners and academic researchers seeking to improve the efficiency and environmental impact of power plants. Provides a comprehensive review of the design, engineering and operational issues of a range of advanced combined cycle plants Introduces basic combined cycle power plant and advanced gas turbine design and reviews the main types of combined cycle systems Discusses the technology, efficiency and emissions performance of natural gas-fired combined cycle (NGCC) systems and integrated gasification combined cycle (IGCC) systems, as well as novel humid air cycle systems and oxy-combustion turbine cycle systems
Download or read book High Temperature Superconductors HTS for Energy Applications written by Ziad Melhem and published by Elsevier. This book was released on 2011-12-21 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: High temperature superconductors (HTS) offer many advantages through their application in electrical systems, including high efficiency performance and high throughput with low-electrical losses. While cryogenic cooling and precision materials manufacture is required to achieve this goal, cost reductions without significant performance loss are being achieved through the advanced design and development of HTS wires, cables and magnets, along with improvements in manufacturing methods. This book explores the fundamental principles, design and development of HTS materials and their practical applications in energy systems. Part one describes the fundamental science, engineering and development of particular HTS components such as wires and tapes, cables, coils and magnets and discusses the cryogenics and electromagnetic modelling of HTS systems and materials. Part two reviews the types of energy applications that HTS materials are used in, including fault current limiters, power cables and energy storage, as well as their application in rotating machinery for improved electrical efficiencies, and in fusion technologies and accelerator systems where HTS magnets are becoming essential enabling technologies. With its distinguished editor and international team of expert contributors, High temperature superconductors (HTS) for energy applications is an invaluable reference tool for anyone involved or interested in HTS materials and their application in energy systems, including materials scientists and electrical engineers, energy consultants, HTS materials manufacturers and designers, and researchers and academics in this field. Discusses fundamental issues and developments of particular HTS components Comprehensively reviews the design and development of HTS materials and then applications in energy systems Reviews the use of HTS materials and cabling transmissions, fault alignment limiters, energy storage, generators and motors, fusion and accelerator
Download or read book Concentrating Solar Power Technology written by Keith Lovegrove and published by Woodhead Publishing. This book was released on 2020-11-26 with total page 832 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of Concentrating Solar Power Technology edited by Keith Lovegrove and Wes Stein presents a fully updated comprehensive review of the latest technologies and knowledge, from the fundamental science to systems design, development, and applications. Part one introduces the fundamental principles of CSP systems, including site selection and feasibility analysis, alongside socio-economic and environmental assessments. Part two focuses on technologies including linear Fresnel reflector technology, parabolic-trough, central tower, and parabolic dish CSP systems, and concentrating photovoltaic systems. Thermal energy storage, hybridization with fossil fuel power plants, and the long-term market potential of CSP technology are also explored. Part three goes on to discuss optimization, improvements, and applications, such as absorber materials for solar thermal receivers, design optimization through integrated techno-economic modelling, and heliostat size optimization. With its distinguished editors and international team of expert contributors, Concentrating Solar Power Technology, 2nd Edition is an essential guide for all those involved or interested in the design, production, development, optimization, and application of CSP technology, including renewable energy engineers and consultants, environmental governmental departments, solar thermal equipment manufacturers, researchers, and academics. Provides a comprehensive review of concentrating solar power (CSP) technology, from the fundamental science to systems design, development and applications Reviews fundamental principles of CSP systems, including site selection and feasibility analysis and socio-economic and environmental assessments Includes an overview of the key technologies of parabolic-trough, central tower linear Fresnel reflector, and parabolic dish CSP systems, and concentrating photovoltaic systems
Download or read book Nuclear Fuel Cycle Science and Engineering written by Ian Crossland and published by Elsevier. This book was released on 2012-09-21 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: The nuclear fuel cycle is characterised by the wide range of scientific disciplines and technologies it employs. The development of ever more integrated processes across the many stages of the nuclear fuel cycle therefore confronts plant manufacturers and operators with formidable challenges. Nuclear fuel cycle science and engineering describes both the key features of the complete nuclear fuel cycle and the wealth of recent research in this important field. Part one provides an introduction to the nuclear fuel cycle. Radiological protection, security and public acceptance of nuclear technology are considered, along with the economics of nuclear power. Part two goes on to explore materials mining, enrichment, fuel element design and fabrication for the uranium and thorium nuclear fuel cycle. The impact of nuclear reactor design and operation on fuel element irradiation is the focus of part three, including water and gas-cooled reactors, along with CANDU and Generation IV designs. Finally, part four reviews spent nuclear fuel and radioactive waste management. With its distinguished editor and international team of expert contributors, Nuclear fuel cycle science and engineering provides an important review for all those involved in the design, fabrication, use and disposal of nuclear fuels as well as regulatory bodies and researchers in this field. Provides a comprehensive and holistic review of the complete nuclear fuel cycle Reviews the issues presented by the nuclear fuel cycle, including radiological protection and security, public acceptance and economic analysis Discusses issues at the front-end of the fuel cycle, including uranium and thorium mining, enrichment and fuel design and fabrication
Download or read book Advances in Clean Hydrocarbon Fuel Processing written by M. Rashid Khan and published by Elsevier. This book was released on 2011-09-23 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conventional coal, oil and gas resources used worldwide for power production and transportation are limited and unsustainable. Research and development into clean, alternative hydrocarbon fuels is therefore aimed at improving fuel security through exploring new feedstock conversion techniques, improving production efficiency and reducing environmental impacts. Advances in clean hydrocarbon fuel processing provides a comprehensive and systematic reference on the range of alternative conversion processes and technologies. Following introductory overviews of the feedstocks, environmental issues and life cycle assessment for alternative hydrocarbon fuel processing, sections go on to review solid, liquid and gaseous fuel conversion. Solid fuel coverage includes reviews of liquefaction, gasification, pyrolysis and biomass catalysis. Liquid fuel coverage includes reviews of sulfur removal, partial oxidation and hydroconversion. Gaseous fuel coverage includes reviews of Fischer-Tropsch synthesis, methanol and dimethyl ether production, water-gas shift technology and natural gas hydrate conversion. The final section examines environmental degradation issues in fuel processing plants as well as automation, advanced process control and process modelling techniques for plant optimisation Written by an international team of expert contributors, Advances in clean hydrocarbon fuel processing provides a valuable reference for fuel processing engineers, industrial petrochemists and energy professionals, as well as for researchers and academics in this field. A comprehensive reference on the range of alternative conversion processes and technologies Provides an overview of the feedstocks, environmental issues and life cycle assessments for alternative hydrocarbon fuel processing, including a review of the key issues in solid, liquid and gaseous fuel conversion Examines automation, advanced process control and process modelling techniques for plant optimisation
Download or read book Joint EPRI 123HiMAT International Conference on Advances in High Temperature Materials written by J. Shingledecker and published by ASM International. This book was released on 2019-10-01 with total page 1500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings from: EPRI’s 9th International Conference on Advances in Materials Technology for Fossil Power Plants and the 2nd International 123HiMAT Conference on High-Temperature Materials
Download or read book Polymer Electrolyte Membrane and Direct Methanol Fuel Cell Technology written by Christoph Hartnig and published by Elsevier. This book was released on 2012-03-19 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer electrolyte membrane fuel cells (PEMFCs) and direct methanol fuel cells (DMFCs) technology are promising forms of low-temperature electrochemical power conversion technologies that operate on hydrogen and methanol respectively. Featuring high electrical efficiency and low operational emissions, they have attracted intense worldwide commercialization research and development efforts. These R&D efforts include a major drive towards improving materials performance, fuel cell operation and durability. In situ characterization is essential to improving performance and extending operational lifetime through providing information necessary to understand how fuel cell materials perform under operational loads.This two volume set reviews the fundamentals, performance, and in situ characterization of PEMFCs and DMFCs. Volume 1 covers the fundamental science and engineering of these low temperature fuel cells, focusing on understanding and improving performance and operation. Part one reviews systems fundamentals, ranging from fuels and fuel processing, to the development of membrane and catalyst materials and technology, and gas diffusion media and flowfields, as well as life cycle aspects and modelling approaches. Part two details performance issues relevant to fuel cell operation and durability, such as catalyst ageing, materials degradation and durability testing, and goes on to review advanced transport simulation approaches, degradation modelling and experimental monitoring techniques.With its international team of expert contributors, Polymer electrolyte membrane and direct methanol fuel cell technology Volumes 1 & 2 is an invaluable reference for low temperature fuel cell designers and manufacturers, as well as materials science and electrochemistry researchers and academics. Covers the fundamental science and engineering of polymer electrolyte membrane fuel cells (PEMFCs) and direct methanol fuel cells (DMFCs), focusing on understanding and improving performance and operation Reviews systems fundamentals, ranging from fuels and fuel processing, to the development of membrane and catalyst materials and technology, and gas diffusion media and flowfields, as well as life cycle aspects and modelling approaches Details performance issues relevant to fuel cell operation and durability, such as catalyst ageing, materials degradation and durability testing, and reviews advanced transport simulation approaches, degradation modelling and experimental monitoring techniques
Download or read book Advances in Biodiesel Production written by R Luque and published by Elsevier. This book was released on 2012-02-22 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biodiesel is one of the main biofuels capable of substituting fossil fuel usage in compression ignition vehicles, and is used in a variety of fuel blends worldwide. First-generation biodiesel has been used in national markets for some time, with fuel quality standards in place for this purpose. There remain, however, several restrictions to sustainable and long term market development, which is influenced by many factors, including food vs. fuel pressures. The development of new generations of biodiesel, aimed at more sustainable and effective feedstock utilisation alongside improved production efficiency and fuel quality, is critical to the future both of this industry and of the continuing use of biodiesel fuels in transportation. This book provides a timely reference on the advances in the development of biodiesel fuels, production processes and technologies. Part one reviews the life cycle sustainability assessment and socio-economic and environmental policy issues associated with advanced biodiesel production, as well as feedstocks and fuel quality standards. This coverage is extended in Part two, with chapters focussing on the development of methods and catalysts essential to the improvement and optimisation of biodiesel production processes and technologies. With its distinguished editors and international team of contributors, Advances in biodiesel production a standard reference for chemical, biochemical and industrial process engineers, as well as scientists and researchers in this important field. Provides a timely reference on the advances in the development of biodiesel fuels, production processes and technologies Reviews the life cycle sustainability assessment and socio-economic and environmental policy issues associated with advanced biodiesel production, as well as feedstocks and fuel quality standards Discusses the development of methods and catalysts essential to the improvement and optimisation of biodiesel production processes and technologies
Download or read book Environmental Remediation and Restoration of Contaminated Nuclear and Norm Sites written by L van Velzen and published by Elsevier. This book was released on 2015-02-02 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear sites become contaminated with radionuclides due to accidents and activities carried out without due consideration for the environment. Naturally-occurring radioactive materials (NORM) released by industrial processes such as coal power production and fertilizer manufacture may also require clean-up. Environmental remediation and restoration aim to reduce exposure to radiation from contaminated soil or groundwater. This book provides a comprehensive overview of this area. Part 1 provides an introduction to the different types of contaminated site and their characteristics. Part 2 addresses environmental restoration frameworks and processes. Part 3 then reviews different remediation techniques and methods of waste disposal. Explores types and characteristics of contaminated nuclear and NORM sites Provides an in depth guide to environmental restoration frameworks and processes including stakeholder involvement, risk assessment and cost-benefit analysis in the remediation and restoration of contaminated nuclear and NORM sites Offers coverage of remediation techniques and waste disposal from electrokinetic remediation to in situ and ex situ bioremediation of radionuclides contaminated soils
