Download or read book CMOS Wireless Transceiver Design written by Jan Crols and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world of wireless communications is changing very rapidly since a few years. The introduction of digital data communication in combination with digital signal process ing has created the foundation for the development of many new wireless applications. High-quality digital wireless networks for voice communication with global and local coverage, like the GSM and DECT system, are only faint and early examples of the wide variety of wireless applications that will become available in the remainder of this decade. The new evolutions in wireless communications set new requirements for the trans ceivers (transmitter-receivers). Higher operating frequencies, a lower power consump tion and a very high degree of integration, are new specifications which ask for design approaches quite different from the classical RF design techniques. The integrata bility and power consumption reduction of the digital part will further improve with the continued downscaling of technologies. This is however completely different for the analog transceiver front-end, the part which performs the interfacing between the antenna and the digital signal processing. The analog front-end's integratability and power consumption are closely related to the physical limitations of the transceiver topology and not so much to the scaling of the used technology. Chapter 2 gives a detailed study of the level of integration in current transceiver realization and analyzes their limitations. In chapter 3 of this book the complex signal technique for the analysis and synthesis of multi-path receiver and transmitter topologies is introduced.

Download or read book Wireless Transceiver Circuits written by Woogeun Rhee and published by CRC Press. This book was released on 2018-09-03 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern transceiver systems require diversified design aspects as various radio and sensor applications have emerged. Choosing the right architecture and understanding interference and linearity issues are important for multi-standard cellular transceivers and software-defined radios. A millimeter-wave complementary metal–oxide–semiconductor (CMOS) transceiver design for multi-Gb/s data transmission is another challenging area. Energy-efficient short-range radios for body area networks and sensor networks have recently received great attention. To meet different design requirements, gaining good system perspectives is important. Wireless Transceiver Circuits: System Perspectives and Design Aspects offers an in-depth look at integrated circuit (IC) design for modern transceiver circuits and wireless systems. Ranging in scope from system perspectives to practical circuit design for emerging wireless applications, this cutting-edge book: Provides system design considerations in modern transceiver design Covers both systems and circuits for the millimeter-wave transceiver design Introduces four energy-efficient short-range radios for biomedical and wireless connectivity applications Emphasizes key building blocks in modern transceivers and transmitters, including frequency synthesizers and digital-intensive phase modulators Featuring contributions from renowned international experts in industry and academia, Wireless Transceiver Circuits: System Perspectives and Design Aspects makes an ideal reference for engineers and researchers in the area of wireless systems and circuits.

Download or read book Wireless Transceiver Architecture written by Pierre Baudin and published by John Wiley & Sons. This book was released on 2014-12-15 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: A fully comprehensive reference combining digital communications and RFIC (Radio Frequency Integrated Circuits) in one complete volume There are many books which focus on the physical implementation of the RF/analog part of transceivers, such as the CMOS design, or the signal processing involved in digital communications. However, there is little material dedicated to transceiver architecture and system design. Similarly, much of the existing literature looks at concepts useful for dimensioning, yet offers little practical information on how to proceed for dimensioning a line-up from scratch, and on the reasons for proceeding that way. This book redresses the balance by explaining the architecture of transceivers and their dimensioning from the perspective of a RFIC architect from within industry. It bridges the gap between digital communication systems and radiofrequency integrated circuit design, covering wireless transceiver architecture and system design from both system level and circuit designer aspects. • Covers digital communication theory, electromagnetism theory and wireless networks organization, from theories to implementation, for deriving the minimum set of constraints to be fulfilled by transceivers • Details the limitations in the physical implementation of transceivers to be considered for their dimensioning, in terms of noise, nonlinearity, and RF impairments • Presents transceiver architecture and system design in terms of transceivers budgets, transceivers architectures, and algorithms for transceivers

Download or read book The Design of CMOS Radio Frequency Integrated Circuits written by Thomas H. Lee and published by Cambridge University Press. This book was released on 2004 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, first published in 2004, is an expanded and revised edition of Tom Lee's acclaimed RFIC text.

Download or read book Design of Terahertz CMOS Integrated Circuits for High Speed Wireless Communication written by Minoru Fujishima and published by Institution of Engineering and Technology. This book was released on 2019-06-24 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Communications technology at a frequency range into Terahertz (THz) levels has attracted attention because it promises near-fibre-optic-speed wireless links for the 5G and post-5G world. Transmitter and receiver integrated circuits based on CMOS, which has the ability to realize such circuits with low power consumption at a low cost, are expected to become increasingly widespread, with much research into the underlying electronics currently underway.

Download or read book RF System Design of Transceivers for Wireless Communications written by Qizheng Gu and published by Springer Science & Business Media. This book was released on 2006-05-03 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is for RF Engineers and, in particular, those engineers focusing mostly on RF systems and RFIC design. The author develops systematic methods for RF systems design, complete with a comprehensive set of design formulas. Its focus on mobile station transmitter and receiver system design also applies to transceiver design of other wireless systems such as WLAN. This comprehensive reference work covers a wide range of topics from general principles of communication theory, as it applies to digital radio designs to specific examples on implementing multimode mobile systems.

Download or read book FM UWB Transceivers for Autonomous Wireless Systems written by Nitz Saputra and published by River Publishers. This book was released on 2017-02-15 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Significant research effort has been devoted to the study and realization of autonomous wireless systems for wireless sensor and personal-area networking, the internet of things, and machine-to-machine communications. Low-power RF integrated circuits, an energy harvester and a power management circuit are fundamental elements of these systems. An FM-UWB Transceiver for Autonomous Wireless Systems presents state-of-the-art developments in low-power FM-UWB transceiver realizations. The design, performance and implementation of prototype transceivers in CMOS technology are presented. A working hardware realization of an autonomous node that includes a prototype power management circuit is also proposed and detailed in this book. Technical topics include: Low-complexity FM-UWB modulation schemesLow-power FM-UWB transceiver prototypes in CMOS technologyCMOS on-chip digital calibration techniquesSolar power harvester and power management in CMOS for low-power RF circuits An FM-UWB Transceiver for Autonomous Wireless Systems is an ideal text and reference for engineers working in wireless communication industries, as well as academic staff and graduate students engaged in electrical engineering and communication systems research.

Download or read book Low Power CMOS Design for Wireless Transceivers written by Alireza Zolfaghari and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive treatment of the challenges in low-power RF CMOS design deals with the design and implementation of low- power wireless transceivers in a standard digital CMOS process. It addresses trade-offs and techniques that improve performance, from the component level to the architectural level.

Download or read book Advances in Analog and RF IC Design for Wireless Communication Systems written by Gabriele Manganaro and published by Academic Press. This book was released on 2013-05-13 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Analog and RF IC Design for Wireless Communication Systems gives technical introductions to the latest and most significant topics in the area of circuit design of analog/RF ICs for wireless communication systems, emphasizing wireless infrastructure rather than handsets. The book ranges from very high performance circuits for complex wireless infrastructure systems to selected highly integrated systems for handsets and mobile devices. Coverage includes power amplifiers, low-noise amplifiers, modulators, analog-to-digital converters (ADCs) and digital-to-analog converters (DACs), and even single-chip radios. This book offers a quick grasp of emerging research topics in RF integrated circuit design and their potential applications, with brief introductions to key topics followed by references to specialist papers for further reading. All of the chapters, compiled by editors well known in their field, have been authored by renowned experts in the subject. Each includes a complete introduction, followed by the relevant most significant and recent results on the topic at hand. This book gives researchers in industry and universities a quick grasp of the most important developments in analog and RF integrated circuit design. - Emerging research topics in RF IC design and its potential application - Case studies and practical implementation examples - Covers fundamental building blocks of a cellular base station system and satellite infrastructure - Insights from the experts on the design and the technology trade-offs, the challenges and open questions they often face - References to specialist papers for further reading

Download or read book Circuits and Systems for Wireless Communications written by Markus Helfenstein and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part I: RF System Integration. 1. RF System Integration; C. Toumazou. 2. RF System Board Level Integration for Mobile Phones; G.J. Aspin. 3. Integration of RF Systems on a Chip; P.J. Mole. 4. Towards the Full Integration of Wireless Front-End Circuits; M. Steyaert. 5. GSM Transceiver Front-End Circuits in 0.25 mum CMOS; Q. Huang, et al. Part II: RF Front-End Circuits. 6. RF Front-End Circuits; Q. Huang. 7. Phase-Noise-to-Carrier Ratio in LC Oscillators; Q. Huang. 8. Design Study of a 900 MHz/1.8 GHz CMOS Transceiver for Dual-Band Applications; B. Razavi. 9. Integrated Wireless Transc.

Download or read book Design and Modeling of Millimeter wave CMOS Circuits for Wireless Transceivers written by Ivan Chee-Hong Lai and published by Springer Science & Business Media. This book was released on 2008-03-25 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Modeling of Millimeter-wave CMOS Circuits for Wireless Transceivers describes in detail some of the interesting developments in CMOS millimetre-wave circuit design. This includes the re-emergence of the slow-wave technique used on passive devices, the license-free 60GHz band circuit blocks and a 76GHz voltage-controlled oscillator suitable for vehicular radar applications. All circuit solutions described are suitable for digital CMOS technology. Digital CMOS technology developments driven by Moore’s law make it an inevitable solution for low cost and high volume products in the marketplace. Explosion of the consumer wireless applications further makes this subject a hot topic of the day. The book begins with a brief history of millimetre-wave research and how the silicon transistor is born. Originally meant for different purposes, the two technologies converged and found its way into advanced chip designs. The second part of the book describes the most important passive devices used in millimetre-wave CMOS circuits. Part three uses these passive devices and builds circuit blocks for the wireless transceiver. The book completes with a comprehensive list of references for further readings. Design and Modeling of Millimeter-wave CMOS Circuits for Wireless Transceivers is useful to show the analogue IC designer the issues involved in making the leap to millimetre-wave circuit designs. The graduate student and researcher can also use it as a starting point to understand the subject or proceed to innovative from the works described herein.

Download or read book Circuit Design for RF Transceivers written by Domine Leenaerts and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applicable for bookstore catalogue

Download or read book Wireless Transceiver Design written by Ariel Luzzatto and published by John Wiley & Sons. This book was released on 2016-09-14 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building upon the success of the first edition (2007), Wireless Transceiver Design 2nd Edition is an accessible textbook that explains the concepts of wireless transceiver design in detail. The architectures and the detailed design of both traditional and advanced all-digital wireless transceivers are discussed in a thorough and systematic manner, while carefully watching out for clarity and simplicity. Many practical examples and solved problems at the end of each chapter allow students to thoroughly understand the mechanisms involved, to build confidence, and enable them to readily make correct and practical use of the applicable results and formulas. From the instructors' perspective, the book will enable the reader to build courses at different levels of depth, starting from the basic understanding, whilst allowing them to focus on particular elements of study. In addition to numerous fully-solved exercises, the authors include actual exemplary examination papers for instructors to use as a reference format for student evaluation. The new edition has been adapted with instructors/lecturers, graduate/undergraduate students and RF engineers in mind. Non-RF engineers looking to acquire a basic understanding of the main related RF subjects will also find the book invaluable.

Download or read book Linear CMOS RF Power Amplifiers for Wireless Applications written by Paulo Augusto Dal Fabbro and published by Springer Science & Business Media. This book was released on 2010-06-22 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in electronics have pushed mankind to create devices, ranging from - credible gadgets to medical equipment to spacecraft instruments. More than that, modern society is getting used to—if not dependent on—the comfort, solutions, and astonishing amount of information brought by these devices. One ?eld that has continuously bene?tted from those advances is the radio frequency integrated c- cuit (RFIC) design, which in its turn has promoted countless bene?ts to the mankind as a payback. Wireless communications is one prominent example of what the - vances in electronics have enabled and their consequences to our daily life. How could anyone back in the eighties think of the possibilities opened by the wireless local area networks (WLANs) that can be found today in a host of places, such as public libraries, coffee shops, trains, to name just a few? How can a youngster, who lives this true WLAN experience nowadays, imagine a world without it? This book dealswith the design oflinearCMOS RF PowerAmpli?ers(PAs). The RF PA is a very important part of the RF transceiver, the device that enables wireless communications. Two important aspects that are key to keep the advances in RF PA design at an accelerate pace are treated: ef?ciency enhancement and frequen- tunable capability. For this purpose, the design of two different integrated circuits realizedina0. 11μmtechnologyispresented,eachoneaddressingadifferentaspect. With respect to ef?ciency enhancement, the design of a dynamic supply RF power ampli?er is treated, making up the material of Chaps. 2 to 4.

Download or read book Wireless Transceiver Design written by Ariel Luzzatto and published by John Wiley & Sons. This book was released on 2007-01-30 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: The insatiable demand for high-speed real-time computer connectivity anywhere, any time, fuelled by the wide-spreading acceptance of Internet Protocol, has accelerated the birth of a large number of wireless data networks. Wireless Transceiver Design provides a comprehensive, practical, self-contained and friendly guide to theoretical and practical modern wireless modem & transceiver design for experienced radio and communication engineers and students. This book will enable readers to fully understand the specifications that characterize the performance of modern wireless modems and transceivers as a whole system, learn how to measure each one of them, and discover how they depend on (one or more) components and subsystems in the various architectures of widespread use. It discusses the important figures related to off-the-shelf radio-frequency and baseband super-components and explains how to measure them to fully evaluate applicability and limitations. Key Features: Readers will learn to master the design, analysis and measurement of important and hard-to-achieve parameters, such as phase noise of oscillators, peak-to-average and linearity of radio-frequency power amplifiers, amplitude and phase balance of quadrature channels and radiated spurious emission Written so that each chapter is self contained and suitable to be consulted on an ad-hoc basis as a reference The lesser covered topic of ‘parasitic phenomena’, the cause of many major after-market disasters, is addressed The material is treated with in-depth mathematical approach, whilst avoiding unnecessarily obscure discussions Suitable as the basis for advanced under-graduate and post-graduate engineering courses, as well as a comprehensive reference, this book will be of interest to those involved in R&D in the fields of engineering and computer sciences, radio engineers working on cellular products and system engineers in the wireless arena, as well as professors and lecturers in the field of communications, undergraduate and post-graduate students in engineering, computer sciences and system engineering.

Download or read book Millimeter Wave Circuits for 5G and Radar written by Gernot Hueber and published by Cambridge University Press. This book was released on 2019-06-20 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover the concepts, architectures, components, tools, and techniques needed to design millimeter-wave circuits for current and emerging wireless system applications. Focusing on applications in 5G, connectivity, radar, and more, leading experts in radio frequency integrated circuit (RFIC) design provide a comprehensive treatment of cutting-edge physical-layer technologies for radio frequency (RF) transceivers - specifically RF, analog, mixed-signal, and digital circuits and architectures. The full design chain is covered, from system design requirements through to building blocks, transceivers, and process technology. Gain insight into the key novelties of 5G through authoritative chapters on massive MIMO and phased arrays, and learn about the very latest technology developments, such as FinFET logic process technology for RF and millimeter-wave applications. This is an essential reading and an excellent reference for high-frequency circuit designers in both academia and industry.

Download or read book RF CMOS Oscillators for Modern Wireless Applications written by Masoud Babaie and published by . This book was released on 2024-10-21 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main goal of this book is to bring forth the exciting and innovative RF oscillator structures that demonstrate better phase noise performance, lower cost, and higher power efficiency than currently achievable.