Download or read book Cleanroom Software Engineering Reference Model written by Richard C. Linger and published by . This book was released on 1996 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: "Cleanroom software engineering is a theory-based, team-oriented process for development and certification of high-reliability software systems under statistical quality control. A principal objective of the Cleanroom process is development of software that exhibits zero failures in use. The Cleanroom name is borrowed from hardware Cleanrooms, with their emphasis on rigorous engineering discipline and focus on defect prevention rather than defect removal. Cleanroom combines mathematically- based methods of software specification, design, and correctness verification with statistical, usage-based testing to certify software fitness for use. Cleanroom projects have reported substantial gains in quality and productivity. This report defines the Cleanroom Software Engineering Reference Model."

Download or read book Cleanroom Software Engineering written by Stacy J. Prowell and published by Pearson Education. This book was released on 1999-03-09 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cleanroom software engineering is a process for developing and certifying high-reliability software. Combining theory-based engineering technologies in project management, incremental development, software specification and design, correctness verification, and statistical quality certification, the Cleanroom process answers today's call for more reliable software and provides methods for more cost-effective software development. Cleanroom originated with Harlan D. Mills, an IBM Fellow and a visionary in software engineering. Written by colleagues of Mills and some of the most experienced developers and practitioners of Cleanroom, Cleanroom Software Engineering provides a roadmap for software management, development, and testing as disciplined engineering practices. This book serves both as an introduction for those new to Cleanroom and as a reference guide for the growing practitioner community. Readers will discover a proven way to raise both quality and productivity in their software-intensive products, while reducing costs. Highlights Explains basic Cleanroom theory Introduces the sequence-based specification method Elaborates the full management, development, and certification process in a Cleanroom Reference Model (CRM) Shows how the Cleanroom process dovetails with the SEI's Capability Maturity Model for Software (CMM) Includes a large case study to illustrate how Cleanroom methods scale up to large projects.

Download or read book Cleanroom Software Engineering Reference Model written by Richard C. Linger and published by . This book was released on 1996 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: "Cleanroom software engineering is a theory-based, team-oriented process for development and certification of high-reliability software systems under statistical quality control. A principal objective of the Cleanroom process is development of software that exhibits zero failures in use. The Cleanroom name is borrowed from hardware Cleanrooms, with their emphasis on rigorous engineering discipline and focus on defect prevention rather than defect removal. Cleanroom combines mathematically- based methods of software specification, design, and correctness verification with statistical, usage-based testing to certify software fitness for use. Cleanroom projects have reported substantial gains in quality and productivity. This report defines the Cleanroom Software Engineering Reference Model."

Download or read book Cleanroom Software Engineering Technology and Process written by Stacy J. Prowell and published by . This book was released on 1999 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Cleanroom Software Engineering a Clear and Concise Reference written by Gerardus Blokdyk and published by 5starcooks. This book was released on 2018-11-15 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: How can the value of Cleanroom software engineering be defined? Do we aggressively reward and promote the people who have the biggest impact on creating excellent Cleanroom software engineering services/products? What tools and technologies are needed for a custom Cleanroom software engineering project? A compounding model resolution with available relevant data can often provide insight towards a solution methodology; which Cleanroom software engineering models, tools and techniques are necessary? How do you use Cleanroom software engineering data and information to support organizational decision making and innovation? Defining, designing, creating, and implementing a process to solve a challenge or meet an objective is the most valuable role... In EVERY group, company, organization and department. Unless you are talking a one-time, single-use project, there should be a process. Whether that process is managed and implemented by humans, AI, or a combination of the two, it needs to be designed by someone with a complex enough perspective to ask the right questions. Someone capable of asking the right questions and step back and say, 'What are we really trying to accomplish here? And is there a different way to look at it?' This Self-Assessment empowers people to do just that - whether their title is entrepreneur, manager, consultant, (Vice-)President, CxO etc... - they are the people who rule the future. They are the person who asks the right questions to make Cleanroom software engineering investments work better. This Cleanroom software engineering All-Inclusive Self-Assessment enables You to be that person. All the tools you need to an in-depth Cleanroom software engineering Self-Assessment. Featuring 703 new and updated case-based questions, organized into seven core areas of process design, this Self-Assessment will help you identify areas in which Cleanroom software engineering improvements can be made. In using the questions you will be better able to: - diagnose Cleanroom software engineering projects, initiatives, organizations, businesses and processes using accepted diagnostic standards and practices - implement evidence-based best practice strategies aligned with overall goals - integrate recent advances in Cleanroom software engineering and process design strategies into practice according to best practice guidelines Using a Self-Assessment tool known as the Cleanroom software engineering Scorecard, you will develop a clear picture of which Cleanroom software engineering areas need attention. Your purchase includes access details to the Cleanroom software engineering self-assessment dashboard download which gives you your dynamically prioritized projects-ready tool and shows your organization exactly what to do next. You will receive the following contents with New and Updated specific criteria: - The latest quick edition of the book in PDF - The latest complete edition of the book in PDF, which criteria correspond to the criteria in... - The Self-Assessment Excel Dashboard, and... - Example pre-filled Self-Assessment Excel Dashboard to get familiar with results generation ...plus an extra, special, resource that helps you with project managing. INCLUDES LIFETIME SELF ASSESSMENT UPDATES Every self assessment comes with Lifetime Updates and Lifetime Free Updated Books. Lifetime Updates is an industry-first feature which allows you to receive verified self assessment updates, ensuring you always have the most accurate information at your fingertips.

Download or read book Software Engineering written by Roger S. Pressman and published by Palgrave Macmillan. This book was released on 2005 with total page 924 pages. Available in PDF, EPUB and Kindle. Book excerpt: For more than 20 years, this has been the best selling guide to software engineering for students and industry professionals alike. This edition has been completely updated and contains hundreds of new references to software tools.

Download or read book Industrial Strength Formal Methods in Practice written by Michael G. Hinchey and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Strength Formal Methods in Practice provides hands-on experience and guidance for anyone who needs to apply formal methods successfully in an industrial context. Each chapter is written by an expert in software engineering or formal methods, and contains background information, introductions to the techniques being used, actual fragments of formalised components, details of results and an analysis of the overall approach. It provides specific details on how to produce high-quality software that comes in on-time and within budget. Aimed mainly at practitioners in software engineering and formal methods, this book will also be of interest to the following groups; academic researchers working in formal methods who are interested in evidence of their success and in how they can be applied on an industrial scale, and students on advanced software engineering courses who need real-life specifications and examples on which to base their work.

Download or read book Mapping of Cleanroom Against the CMM written by Paul G. Arnold and published by . This book was released on 1996 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Cleanroom Software Engineering Practices written by Shirley A. Becker and published by IGI Global. This book was released on 1997-01-01 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cleanroom Software Engineering is a set of techniques and practices for the development of software-intensive systems. This book brings together concepts, lessons learned and best practices resulting from Cleanroom projects surveyed in the past several years.

Download or read book Software Engineering Laboratory Sel Cleanroom Process Model written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-07-10 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Software Engineering Laboratory (SEL) cleanroom process model is described. The term 'cleanroom' originates in the integrated circuit (IC) production process, where IC's are assembled in dust free 'clean rooms' to prevent the destructive effects of dust. When applying the clean room methodology to the development of software systems, the primary focus is on software defect prevention rather than defect removal. The model is based on data and analysis from previous cleanroom efforts within the SEL and is tailored to serve as a guideline in applying the methodology to future production software efforts. The phases that are part of the process model life cycle from the delivery of requirements to the start of acceptance testing are described. For each defined phase, a set of specific activities is discussed, and the appropriate data flow is described. Pertinent managerial issues, key similarities and differences between the SEL's cleanroom process model and the standard development approach used on SEL projects, and significant lessons learned from prior cleanroom projects are presented. It is intended that the process model described here will be further tailored as additional SEL cleanroom projects are analyzed. Green, Scott and Basili, Victor and Godfrey, Sally and Mcgarry, Frank and Pajerski, Rose and Waligora, Sharon Goddard Space Flight Center...

Download or read book Strategic Software Engineering written by Fadi P. Deek and published by CRC Press. This book was released on 2005-05-26 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: The pervasiveness of software in business makes it crucial that software engineers and developers understand how software development impacts an entire organization. Strategic Software Engineering: An Interdisciplinary Approach presents software engineering as a strategic, business-oriented, interdisciplinary endeavor, rather than simply a technica

Download or read book The Cleanroom Case Study in the Software Engineering Laboratory Project Description and Early Analysis written by National Aeronautics and Space Adm Nasa and published by Independently Published. This book was released on 2018-11-06 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: This case study analyzes the application of the cleanroom software development methodology to the development of production software at the NASA/Goddard Space Flight Center. The cleanroom methodology emphasizes human discipline in program verification to produce reliable software products that are right the first time. Preliminary analysis of the cleanroom case study shows that the method can be applied successfully in the FDD environment and may increase staff productivity and product quality. Compared to typical Software Engineering Laboratory (SEL) activities, there is evidence of lower failure rates, a more complete and consistent set of inline code documentation, a different distribution of phase effort activity, and a different growth profile in terms of lines of code developed. The major goals of the study were to: (1) assess the process used in the SEL cleanroom model with respect to team structure, team activities, and effort distribution; (2) analyze the products of the SEL cleanroom model and determine the impact on measures of interest, including reliability, productivity, overall life-cycle cost, and software quality; and (3) analyze the residual products in the application of the SEL cleanroom model, such as fault distribution, error characteristics, system growth, and computer usage. Green, Scott and Kouchakdjian, Ara and Basili, Victor and Weidow, David Goddard Space Flight Center...

Download or read book Software Processes and Life Cycle Models written by Ralf Kneuper and published by Springer. This book was released on 2018-08-24 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of the field of software processes, covering in particular the following essential topics: software process modelling, software process and lifecycle models, software process management, deployment and governance, and software process improvement (including assessment and measurement). It does not propose any new processes or methods; rather, it introduces students and software engineers to software processes and life cycle models, covering the different types ranging from “classical”, plan-driven via hybrid to agile approaches. The book is structured as follows: In chapter 1, the fundamentals of the topic are introduced: the basic concepts, a historical overview, and the terminology used. Next, chapter 2 covers the various approaches to modelling software processes and lifecycle models, before chapter 3 discusses the contents of these models, addressing plan-driven, agile and hybrid approaches. The following three chapters address various aspects of using software processes and lifecycle models within organisations, and consider the management of these processes, their assessment and improvement, and the measurement of both software and software processes. Working with software processes normally involves various tools, which are the focus of chapter 7, before a look at current trends in software processes in chapter 8 rounds out the book. This book is mainly intended for graduate students and practicing professionals. It can be used as a textbook for courses and lectures, for self-study, and as a reference guide. When used as a textbook, it may support courses and lectures on software processes, or be used as complementary literature for more basic courses, such as introductory courses on software engineering or project management. To this end, it includes a wealth of examples and case studies, and each chapter is complemented by exercises that help readers gain a better command of the concepts discussed.

Download or read book Software Engineering written by M. N. Hoda and published by Springer. This book was released on 2018-06-12 with total page 711 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected proceedings of the annual convention of the Computer Society of India. Divided into 10 topical volumes, the proceedings present papers on state-of-the-art research, surveys, and succinct reviews. They cover diverse topics ranging from communications networks to big data analytics, and from system architecture to cyber security. This book focuses on Software Engineering, and informs readers about the state of the art in software engineering by gathering high-quality papers that represent the outcomes of consolidated research and innovations in Software Engineering and related areas. In addition to helping practitioners and researchers understand the chief issues involved in designing, developing, evolving and validating complex software systems, it provides comprehensive information on developing professional careers in Software Engineering. It also provides insights into various research issues such as software reliability, verification and validation, security and extensibility, as well as the latest concepts like component-based development, software process models, process-driven systems and human-computer collaborative systems.

Download or read book Mathematical Approaches to Software Quality written by Gerard O'Regan and published by Springer Science & Business Media. This book was released on 2006-08-27 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive introduction to various mathematical approaches to achieving high-quality software. An introduction to mathematics that is essential for sound software engineering is provided as well as a discussion of various mathematical methods that are used both in academia and industry. The mathematical approaches considered include: Z specification language Vienna Development Methods (VDM) Irish school of VDM (VDM) approach of Dijkstra and Hoare classical engineering approach of Parnas Cleanroom approach developed at IBM software reliability, and unified modelling language (UML). Additionally, technology transfer of the mathematical methods to industry is considered. The book explains the main features of these approaches and applies mathematical methods to solve practical problems. Written with both student and professional in mind, this book assists the reader in applying mathematical methods to solve practical problems that are relevant to software engineers.

Download or read book The Cleanroom Approach to Quality Software Development written by Michael Dyer and published by . This book was released on 1992-02-07 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the first practical attempt to place software development under statistical quality control and to deliver software with a known and certified meantime to failure. Shows how to improve productivity during software development using statistical design methods, and gives guidelines for writing more precise specifications, building simpler designs and avoiding error rework.

Download or read book Industrial Applications of Formal Methods to Model Design and Analyze Computer Systems written by Dan Craigen and published by William Andrew. This book was released on 2012-12-02 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Formal methods are mathematically-based techniques, often supported by reasoning tools, that can offer a rigorous and effective way to model, design and analyze computer systems. The purpose of this study is to evaluate international industrial experience in using formal methods. The cases selected are representative of industrial-grade projects and span a variety of application domains. The study had three main objectives: · To better inform deliberations within industry and government on standards and regulations; · To provide an authoritative record on the practical experience of formal methods to date; and À To suggest areas where future research and technology development are needed. This study was undertaken by three experts in formal methods and software engineering: Dan Craigen of ORA Canada, Susan Gerhart of Applied Formal Methods, and Ted Ralston of Ralston Research Associates. Robin Bloomfield of Adelard was involved with the Darlington Nuclear Generating Station Shutdown System case. Support for this study was provided by organizations in Canada and the United States. The Atomic Energy Control Board of Canada (AECB) provided support for Dan Craigen and for the technical editing provided by Karen Summerskill. The U.S. Naval Research Laboratories (NRL), Washington, DC, provided support for all three authors. The U.S. National Institute of Standards and Technology (NIST) provided support for Ted Ralston.