Download or read book Chemistry Manufacture and Applications of Natural Rubber written by Shinzo Kohjiya and published by Woodhead Publishing. This book was released on 2021-03-24 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemistry, Manufacture and Applications of Natural Rubber, Second Edition presents the latest advances in the processing, properties and advanced applications of natural rubber (NR), drawing on state-of-the-art research in the field. Chapters cover manufacturing, processing and properties of natural rubber, describing biosynthesis, vulcanization for improved performance, strain-induced crystallization, self-reinforcement, rheology and mechanochemistry for processing, computer simulation of properties, scattering techniques and stabilizing agents. Applications covered include natural rubber, carbon allotropes, eco-friendly soft bio-composites using NR matrices and marine products, the use of NR for high functionality such as shape memory, NR for the tire industry, and natural rubber latex with advanced applications. This is an essential resource for academic researchers, scientists and (post)graduate students in rubber science, polymer science, materials science and engineering, and chemistry. In industry, this book enables professionals, R&D, and producers across the natural rubber, tire, rubber and elastomer industries, as well as across industries looking to use natural rubber products, to understand and utilize natural rubber for cutting-edge applications. - Explains the latest manufacture and processing techniques for natural rubber (NR) with enhanced properties - Explores novel applications of natural rubber across a range of industries, including current and potential uses - Discusses resources and utilization, and considers sustainable future development of natural rubber

Download or read book Chemistry Manufacture and Applications of Natural Rubber written by Shinzo Kohjiya and published by Elsevier. This book was released on 2021-03-26 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemistry, Manufacture and Applications of Natural Rubber, Second Edition presents the latest advances in the processing, properties and advanced applications of natural rubber (NR), drawing on state-of-the-art research in the field. Chapters cover manufacturing, processing and properties of natural rubber, describing biosynthesis, vulcanization for improved performance, strain-induced crystallization, self-reinforcement, rheology and mechanochemistry for processing, computer simulation of properties, scattering techniques and stabilizing agents. Applications covered include natural rubber, carbon allotropes, eco-friendly soft bio-composites using NR matrices and marine products, the use of NR for high functionality such as shape memory, NR for the tire industry, and natural rubber latex with advanced applications. This is an essential resource for academic researchers, scientists and (post)graduate students in rubber science, polymer science, materials science and engineering, and chemistry. In industry, this book enables professionals, R&D, and producers across the natural rubber, tire, rubber and elastomer industries, as well as across industries looking to use natural rubber products, to understand and utilize natural rubber for cutting-edge applications. Explains the latest manufacture and processing techniques for natural rubber (NR) with enhanced properties Explores novel applications of natural rubber across a range of industries, including current and potential uses Discusses resources and utilization, and considers sustainable future development of natural rubber

Download or read book Synthetic Rubbers Their Chemistry and Technology written by D.C. Blackley and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has its origin in a proposal made a few years ago that I should collaborate with Dr H. J. Stern in the production of a third edition of his well-known text-book entitled Rubber: Natural and Synthetic. The sugges tion was that I should contribute a series of chapters on synthetic rubbers. Although, in the event, it has not proved possible to publish the full book in the form originally planned, it was apparent that, with some restructuring, the material which I had collected would be valuable as an independent summary of the chemistry and technology of synthetic rubbers. It is in this form that the material is now offered. The primary purpose of this book is to provide a brief up-to-date survey of the principal types of synthetic rubber which have been and are currently available. Two classes of material are included which are regarded by some as being thermoplastics rather than rubbers, namely, plasticised polyvinyl chloride and the thermoplastic synthetic rubbers. The topics which are covered for each main family of synthetic rubbers are (i) the sources of the monomers, (ii) polymerisation procedures and the effects of important polymerisation variables upon the rubber produced, (iii) the types of rubber currently available commercially, (iv) interesting aspects of the compounding of the rubbers, with special reference to such matters as vulcanisation, reinforcement, protection against degradation, and (where appropriate) plasticisation, and (v) an indication of applications.

Download or read book Science and Technology of Rubber written by James E. Mark and published by Elsevier. This book was released on 2011-07-28 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Science and Technology of Rubber, Third Edition provides a broad survey of elastomers with special emphasis on materials with a rubber-like elasticity. As in the 2nd edition, the emphasis remains on a unified treatment of the material; exploring topics from the chemical aspects such as elastomer synthesis and curing, through recent theoretical developments and characterization of equilibrium and dynamic properties, to the final applications of rubber, including tire engineering and manufacturing. Many advances have been made in polymer and elastomers research over the past ten years since the 2nd edition was published. Updated material stresses the continuous relationship between the ongoing research in synthesis, physics, structure and mechanics of rubber technology and industrial applications. Special attention is paid to recent advances in rubber-like elasticity theory and new processing techniques for elastomers. This new edition is comprised of 20% new material, including a new chapter on environmental issues and tire recycling.

Download or read book Rubber Compounding written by Brendan Rodgers and published by CRC Press. This book was released on 2015-10-09 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rubber Compounding: Chemistry and Applications describes the production, processing, and characteristics of a wide range of materials utilized in the modern tire and rubber industry, from natural to butyl rubber, carbon black, silica, silanes, and beyond. Containing contributions from leading specialists in the field, the text investigates the chem

Download or read book Rubber Chemistry written by J.A. Brydson and published by Springer. This book was released on 1979-12-14 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: The property of rubber elasticity is displayed by an ever increasing range of polymers-hydrocarbon, polar and even inorganic. Such rubbery polymers, however, differ in the way by which they are made, in their chemical and physical properties, in the way in which they form network structures and in the way in which they age. Such differences are due, primarily, to differences in their underlying chemistry and chemical structure. It is the aim of this monograph to survey, in a single volume, the chemistry of these rubbery polymeric materials and to cover such aspects as their preparative chemistry, relationship of chemical structure to properties, the molecular nature of high elasticity, cross linking and other chemical modification and ageing. This has been done, not simply because rubbery materials are so fascinating in their own right but also because of their industrial importance. It is therefore hoped that this book will help both the polymerization chemist and the rubber technologist to have a better and broader based understanding of the materials with which they are concerned and to be able to suggest directions along which developments may proceed.

Download or read book Rubber Technology written by M. Morton and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: About ten years after the publication of the Second Edition (1973), it became apparent that it was time for an up-date of this book. This was especially true in this case, since the subject matter has traditionally dealt mainly with the structure, properties, and technology of the various elastomers used in industry, and these are bound to undergo significant changes over the period of a decade. In revising the contents of this volume, it was thought best to keep the orig inal format. Hence the first five chapters discuss the same general subject matter as before. The chapters dealing with natural rubber and the synthetic elastomers are up-dated, and an entirely new chapter has been added on the thermoplastic elastomers, which have, of course, grown tremendously in importance. Another innovation is the addition of a new chapter, "Miscellaneous Elastomers," to take care of "old" elastomers, e.g., polysulfides, which have decreased some what in importance, as well as to introduce some of the newly-developed syn thetic rubbers which have not yet reached high production levels. The editor wishes to express his sincere appreciation to all the contributors, without whose close cooperation this task would have been impossible. He would especially like to acknowledge the invaluable assistance of Dr. Howard Stephens in the planning of this book, and for his suggestion of suitable authors.

Download or read book The Chemistry of Polymers written by John W. Nicholson and published by Royal Society of Chemistry. This book was released on 1997-12-31 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: A concise introductory text written from an applied angle, primarily for recent graduates now working in industry who haven't previously studied polymer chemistry. Available in the US from CRC Press. Annotation copyrighted by Book News, Inc., Portland, OR

Download or read book Natural Rubber written by Janet L. Hamilton and published by Nova Science Publishers. This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural Rubber (NR) is a renewable polymer endowed with remarkable properties including its high elasticity and high film forming capacity, properties that enable its use in a wide range of applications. In this book, Chapter One reviews properties, behavior and uses of NR. Chapter Two discusses NR properties and conventional applications, as well the development of new thermo-reversible cross linked NR. Chapter Three evaluates samples of natural rubber latex using a coaxial cylinder rheometer and, as from the data obtained, propose a model to determine the flow energy at different total solids contents. Chapter Four provides a review of the past, present and future perspectives of the vulcanization of natural rubber. Chapter Five investigates the effect of increasing MMT loading levels on the physico-mechanical properties of EVA/ devulcanized rubber (DVC rubber) blends. Chapter Six discusses in detail the parameters and conditions that could influence the degradation reaction of NR latex in the presence of hydrogen peroxide and UV light. Chapter Seven focuses specifically on the use of metal and metal oxide particles in NR, epoxidized natural rubber (ENR) and their respective blends reported between 2010 to 2015.

Download or read book Rubber Recycling written by Jin Kuk Kim and published by Royal Society of Chemistry. This book was released on 2018-10-03 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rubber is used in a vast number of products, from tyres on vehicles to disposable surgical gloves. Increasingly both manufacturers and legislators are realising that recycling is essential for environmental sustainability and can improve the cost of manufacture. The volume of rubber waste produced globally makes it difficult to manage as accumulated waste rubber, especially in the form of tyres, can pose a significant fire risk. Recycling rubber not only prevents this problem but can produce new materials with desirable properties that virgin rubbers lack. This book presents an up-to-date overview of the fundamental and applied aspects of renewability and recyclability of rubber materials, emphasising existing recycling technologies with significant potential for future applications along with a detailed outline of new technology based processing of rubber to reuse and recycle. This book will be of interest to researchers in both academia and industry as well as postgraduate students working in polymer chemistry, materials processing, materials science and engineering.

Download or read book Rubber to Rubber Adhesion written by Dinesh Kumar Kotnees and published by John Wiley & Sons. This book was released on 2021-08-24 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: RUBBER TO RUBBER ADHESION Readers will get helpful ideas and in-depth knowledge about various aspects of rubber to rubber adhesion with particular reference to theory and practice. This book covers various aspects of rubber to rubber adhesion which is important theoretically, as well as having practical implications. Rubber is a polymer whose glass transition temperature is well below the room temperature and hence the chains are very mobile at room and higher temperatures, making the material very versatile. Rubber is used in a large number of applications ranging from underground mining to tire to space vehicles. In all these cases, compounded rubbers are used in laminates and joined. The higher the adhesion, the higher will be the joint strength. The principles taught in adhesion science and technology are extensively used to prepare better joints and more useful products. The book serves to satisfy a wide range of disciplines (polymers, materials, chemical, chemistry, mechanical, etc.) and starts with an introduction on rubber, then characterization of rubber, rubber surface and joints and, finally, other chapters on rubber to rubber adhesion. Scientific aspects to understand the technology are highlighted. It gives a comprehensive treatment on adhesion between unvulcanized elastomers, self-healing of elastomers, adhesion between compounded elastomers by co-crosslinking, adhesion between partially vulcanized compounded rubber and partially vulcanized compounded rubber, adhesion between vulcanized rubber and unvulcanized rubber- or partially vulcanized rubber, and adhesion between vulcanized rubber and vulcanized rubber. Audience The book will be used by academicians in polymer science, materials science, chemical and mechanical engineering, chemistry, R & D personnel, industry people, as well as rubber and adhesion practitioners.

Download or read book Carraher s Polymer Chemistry written by Charles E. Carraher Jr. and published by CRC Press. This book was released on 2017-10-12 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carraher's Polymer Chemistry, Tenth Edition integrates the core areas of polymer science. Along with updating of each chapter, newly added content reflects the growing applications in Biochemistry, Biomaterials, and Sustainable Industries. Providing a user-friendly approach to the world of polymeric materials, the book allows students to integrate their chemical knowledge and establish a connection between fundamental and applied chemical information. It contains all of the elements of an introductory text with synthesis, property, application, and characterization. Special sections in each chapter contain definitions, learning objectives, questions, case studies and additional reading.

Download or read book Reverse Engineering of Rubber Products written by Saikat Das Gupta and published by CRC Press. This book was released on 2013-09-19 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reverse engineering is widely practiced in the rubber industry. Companies routinely analyze competitors’ products to gather information about specifications or compositions. In a competitive market, introducing new products with better features and at a faster pace is critical for any manufacturer. Reverse Engineering of Rubber Products: Concepts, Tools, and Techniques explains the principles and science behind rubber formulation development by reverse engineering methods. The book describes the tools and analytical techniques used to discover which materials and processes were used to produce a particular vulcanized rubber compound from a combination of raw rubber, chemicals, and pigments. A Compendium of Chemical, Analytical, and Physical Test Methods Organized into five chapters, the book first reviews the construction of compounding ingredients and formulations, from elastomers, fillers, and protective agents to vulcanizing chemicals and processing aids. It then discusses chemical and analytical methods, including infrared spectroscopy, thermal analysis, chromatography, and microscopy. It also examines physical test methods for visco-elastic behavior, heat aging, hardness, and other features. A chapter presents important reverse engineering concepts. In addition, the book includes a wide variety of case studies of formula reconstruction, covering large products such as tires and belts as well as smaller products like seals and hoses. Get Practical Insights on Reverse Engineering from the Book’s Case Studies Combining scientific principles and practical advice, this book brings together helpful insights on reverse engineering in the rubber industry. It is an invaluable reference for scientists, engineers, and researchers who want to produce comparative benchmark information, discover formulations used throughout the industry, improve product performance, and shorten the product development cycle.

Download or read book Elastomers and Rubber Compounding Materials written by I Franta and published by Elsevier. This book was released on 2012-12-02 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: Elastomers and Rubber Compounding Materials reviews the properties of elastomers and particular groups of ingredients and chemicals mixed into the basic elastomer to form a rubber compound. After introducing the history of rubber industry and the general properties of rubber, the book discusses the properties, classification, concentration, stabilization, modification, application, transport, and storage of latex. It presents as well the methods of production, composition, physical properties, and chemical reactions of dry rubber. The book then focuses on the production and classification of different synthetic rubbers, such as styrene-butadiene, isoprene, butadiene, ethylene-propylene, and chloroprene. It also discusses the production, properties, and applications of elastomers, vulcanization chemicals, fillers, stabilizers, plasticizers, blowing agents, and textile reinforcing materials used in formulating rubber compounds. This book will be of great value not only to those who are in the rubber industry, but also to students of polymer science and rubber technology.

Download or read book Self Healing Smart Materials written by Inamuddin and published by John Wiley & Sons. This book was released on 2021-04-26 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book describes the design, synthesis, mechanisms, characterization, fundamental properties, functions and development of self-healing smart materials and their composites with their allied applications. It covers cementitious concrete composites, bleeding composites, elastomers, tires, membranes, and composites in energy storage, coatings, shape-memory, aerospace and robotic applications. The 21 chapters are written by researchers from a variety of disciplines and backgrounds.

Download or read book Rubber Analysis written by Martin J. Forrest and published by Walter de Gruyter GmbH & Co KG. This book was released on 2019-04-01 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rubber analysis plays a vital part in ensuring that manufactured products are fit for purpose. This comprehensive, application-based book with up-to-date referencing covers all important applications and subject area associated with the analysis of rubber compounds and rubber products. Includes characterization of rubber polymers, rubber fumes, identification of extractables and leachables, as well as reverse engineering on compounded products.

Download or read book Polymer Chemistry written by Timothy P. Lodge and published by CRC Press. This book was released on 2020-07-14 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: A well-rounded and articulate examination of polymer properties at the molecular level, Polymer Chemistry focuses on fundamental principles based on underlying chemical structures, polymer synthesis, characterization, and properties. It emphasizes the logical progression of concepts and provide mathematical tools as needed as well as fully derived problems for advanced calculations. The much-anticipated Third Edition expands and reorganizes material to better develop polymer chemistry concepts and update the remaining chapters. New examples and problems are also featured throughout. This revised edition: Integrates concepts from physics, biology, materials science, chemical engineering, and statistics as needed Contains mathematical tools and step-by-step derivations for example problems Incorporates new theories and experiments using the latest tools and instrumentation and topics that appear prominently in current polymer science journals The number of homework problems has been greatly increased, to over 350 in all The worked examples and figures have been augmented More examples of relevant synthetic chemistry have been introduced into Chapter 2 ("Step-Growth Polymers") More details about atom-transfer radical polymerization and reversible addition/fragmentation chain-transfer polymerization have been added to Chapter 4 ("Controlled Polymerization") Chapter 7 (renamed "Thermodynamics of Polymer Mixtures") now features a separate section on thermodynamics of polymer blends Chapter 8 (still called "Light Scattering by Polymer Solutions") has been supplemented with an extensive introduction to small-angle neutron scattering Polymer Chemistry, Third Edition offers a logical presentation of topics that can be scaled to meet the needs of introductory as well as more advanced courses in chemistry, materials science, polymer science, and chemical engineering.