Download or read book Chemistry of Chlorine containing Polymers written by Karl Samoĭlovich Minsker and published by . This book was released on 2000 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemistry of Chlorine-Containing Polymers - Syntheses, Degradation, Stabilization
Download or read book Chemistry Beyond Chlorine written by Pietro Tundo and published by Springer. This book was released on 2016-09-17 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the industrial revolution, chlorine remains an iconic molecule even though its production by the electrolysis of sodium chloride is extremely energy intensive. The rationale behind this book is to present useful and industrially relevant examples for alternatives to chlorine in synthesis. This multi-authored volume presents numerous contributions from an international spectrum of authors that demonstrate how to facilitate the development of industrially relevant and implementable breakthrough technologies. This volume will interest individuals working in organic synthesis in industry and academia who are working in Green Chemistry and Sustainable Technologies.
Download or read book Adhesives for Chlorine containing Polymers written by T. Sohne and published by . This book was released on 1986 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pyrolysis GC MS Data Book of Synthetic Polymers written by Shin Tsuge and published by Elsevier. This book was released on 2011-08-02 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this data book, both conventional Py-GC/MS where thermal energy alone is used to cause fragmentation of given polymeric materials and reactive Py-GC/MS in the presence of organic alkaline for condensation polymers are compiled. Before going into detailed presentation of the data, however, acquiring a firm grip on the proper understanding about the situation of Py-GC/MS would promote better utilization of the following pyrolysis data for various polymers samples. This book incorporates recent technological advances in analytical pyrolysis methods especially useful for the characterization of 163 typical synthetic polymers. The book briefly reviews the instrumentation available in advanced analytical pyrolysis, and offers guidance to perform effectually this technique combining with gas chromatography and mass spectrometry. Main contents are comprehensive sample pyrograms, thermograms, identification tables, and representative mass spectra (MS) of pyrolyzates for synthetic polymers. This edition also highlights thermally-assisted hydrolysis and methylation technique effectively applied to 33 basic condensation polymers. Coverage of Py-GC/MS data of conventional pyrograms and thermograms of basic 163 kinds of synthetic polymers together with MS and retention index data for pyrolyzates, enabling a quick identification Additional coverage of the pyrograms and their related data for 33 basic condensation polymers obtained by the thermally-assisted hydrolysis and methylation technique All compiled data measured under the same experimental conditions for pyrolysis, gas chromatography and mass spectrometry to facilitate peak identification Surveyable instant information on two facing pages dedicated to the whole data of a given polymer sample
Download or read book The Chemistry of Polymers written by John W Nicholson and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The Chemistry of Polymers is a concise, easy-to-read, inexpensive introduction to the subject and fulfils the need for a polymer text written from an applied angle. It covers the basics of polymer chemistry while emphasising the practical applications and is essential for those who wish to acquire a rapid overview of the field. This book covers the basics of polymer synthesis, characterisation, reaction kinetics and materials science, as well as important specialised topics such as polymer degradation, polymers and pollution, and a variety of technological developments. Now in its second edition, the book has been revised and expanded to reflect recent developments in the subject. There are, for example, extensive updates to the ""Special topics in polymer chemistry"" section, with an additional section on optically active polymers, expanded sections on ionic and co-ordination polymerisations, and copolymerisation, and additional examples of new environmental legislation are outlined wherever appropriate."
Download or read book Chemical Engineering of Polymers written by Omari V. Mukbaniani and published by CRC Press. This book was released on 2017-11-14 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this important volume, the structures and functions of these advanced polymer and composite systems are evaluated with respect to improved or novel performance, and the potential implications of those developments for the future of polymer-based composites and multifunctional materials are discussed. It focuses exclusively on the latest research related to polymer and composite materials, especially new trends in frontal polymerization and copolymerization synthesis, functionalization of polymers, physical properties, and hybrid systems. Several chapters are devoted to composites and nanocomposites.
Download or read book Additives for Plastics written by Jan Stipek and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the most important substances used as additives in the plastics industry to improve the properties of polymer-based materials. Each chapter deals with a particular type of additive based on the type's definition, structure, and classification according to main effects on polymeric materials. The mechanism of the additive efficiency and its effects on basic properties of specific polymers are discussed and a survey of its important qualities and practical applications is given. Each chapter is introduced by a theoretical analysis of the practical and technological importance of the ad ditive. The book is mainly intended for students in technical colleges, polytechnics and universities who are studying plastics technology and macromolecular chemistry as part of their general curriculum and for technologists in industry engaged in development, sales, technical service and production functions, and applications of plastics. An elementary knowledge of chemistry, physical chemistry and polymer science at the technical college level is assumed. Prague and Montreal, December 1982 J. Stepek, H. Daoust Table of Contents Introduction .
Download or read book Kirk Othmer Concise Encyclopedia of Chemical Technology 2 Volume Set written by Kirk-Othmer and published by John Wiley & Sons. This book was released on 2007-07-16 with total page 2762 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an easily-accessible two-volume encyclopedia summarizing all the articles in the main volumes Kirk-Othmer Encyclopedia of Chemical Technology, Fifth Edition organized alphabetically. Written by prominent scholars from industry, academia, and research institutions, the Encyclopedia presents a wide scope of articles on chemical substances, properties, manufacturing, and uses; on industrial processes, unit operations in chemical engineering; and on fundamentals and scientific subjects related to the field.
Download or read book Fire Resistant and Thermally Stable Materials Derived from Chlorinated Polyethylene written by Gennady Zaikov and published by CRC Press. This book was released on 2023-01-06 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new volume in the book series New Concepts in Polymer Science focuses on the problem of creating materials with reduced combustibility as well as the use of polymeric materials for protection from fire or overheating. The majority of polymeric materials are combustible, which has led to the development of polymers, and materials based on these, with reduced combustibility. However the combustibility degree or their ability to protect from fire or high temperature can be indicated only in particular cases of combustion. In this volume the results of the development of physicochemical bases for creating organic polymeric materials with reduced combustibility, which are capable of protecting against high temperatures are discussed. A presentation of chlorinated polyolefins as organic polymers with reduced combustibility is also given.
Download or read book Organometallic Chemistry of Titanium Zirconium and Hafnium written by P.C. Wailes and published by Elsevier. This book was released on 2012-12-02 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organometallic Chemistry of Titanium, Zirconium, and Hafnium covers the chemistry of organic complexes of titanium, zirconium, and hafnium having metal-to-carbon linkage. This book is organized into eight chapters that consider the significant developments in delineating the chemistry of these metal derivatives. This book starts with a description of the stability and bonding in cyclopentadienyl derivatives of the metals, based on the thermodynamic and spectroscopic evidence. The remaining chapters discuss the preparation and reactions of titanium-, zirconium-, and hafnium-bonded organic compounds. These chapters also look into the synthetic difficulties encountered from the reactions and preparation of these compounds. The stabilization and adduct formation of these metal complexes are also explored. Organic chemists and organic chemistry researchers and students will find this book invaluable.
Download or read book Bulletin of the Chemical Society of Japan written by Nihon Kagakkai and published by . This book was released on 1991 with total page 1170 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mercury Cadmium Lead Handbook for Sustainable Heavy Metals Policy and Regulation written by Michael Scoullos and published by Springer Science & Business Media. This book was released on 2001-12-31 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although this is a handbook for policy and regulation, the major part of it is filled with data on the three heavy metals that served as examples: mercury, cadmium and lead. Their stocks, productions, prices, trade flows, uses and applications, recovery and recycling, as well as their (eco)toxicological characteristics have been collected and presented to their fullest extent. In addition, they are thoroughly analysed for consistency, future developments and trends and, of course, their consequences for sustainable development and future policy and regulation. The second part, on policy and regulation, begins with an extensive and fundamental consideration on the characteristics of a sustainable heavy metals policy, whereby innovative policy tools are developed. In many aspects, these considerations are also valid for other metals and even non-metallic persistent substances. Addressing the European Union in particular, its policy-making structure and practice are critically analysed, in order to develop feasible and viable guidelines for long-, medium- and short-term EU policy measures. The results of this exercise are then applied to the three heavy metals. In each of these three chapters, all existing EU measures are presented in detail and confronted with better practices elsewhere, resulting in many suggestions and recommendations for the future. In the last chapter, the main conclusions and recommendations are carefully summarised. Together with a very extended table of contents, this makes the book easily accessible, in spite of its volume. This Handbook is a must for policy-makers and administrators at all levels, as well as for their counterparts in a wide variety of industries. In addition, it is well-suited for environmental science courses at academic or higher professional level.
Download or read book Multicomponent Polymeric Materials written by Gennady E. Zaikov and published by CRC Press. This book was released on 2013-01-23 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Through a balanced combination of theory and experiments, this book provides a detailed overview of the main and most up-to-date advances in the area of polymeric materials. Because the subject is essentially interdisciplinary and brings together scientists and engineers with different educational backgrounds, the book offers a research-oriented exposition of the fundamentals as well. The book is based on the editors’ and authors’ extensive experience in research, development, and education in the field of materials science, and especially polymer testing, polymer diagnostics, and failure analysis. A comprehensive coverage of the methods of polymer testing is provided along with the results of the authors’ work on deformation and fracture behavior of polymers. This book will be useful to faculty as well as advanced-level students in materials science, materials technology, plastic technology, mechanical engineering, process engineering, and chemical engineering.
Download or read book Inorganic and Organometallic Polymers written by Vadapalli Chandrasekhar and published by Springer Science & Business Media. This book was released on 2005-01-18 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has its origins in courses taught by the author to various und- graduate and graduate students at the Indian Institute of Technology, K- pur, India. The diversity of inorganic chemistry and its impact on polymer chemistry has been profound. This subject matter has grown considerably in the last decade and the need to present it in a coherent manner to young minds is a pedagogic challenge. The aim of this book is to present to the students an introduction to the developments in Inorganic and - ganometallic polymers. This book is divided into eight chapters. Chapter 1 provides a general overview on the challenges of Inorganic polymer synthesis. This is f- lowed by a survey of organic polymers and also includes some basic f- tures of polymers. Chapters 3-8 deal with prominent families of inorganic and organometallic polymers. Although the target group of this book is the undergraduate and graduate students of chemistry, chemical engineering and materials science it is also hoped that chemists and related scientists in industry would find this book useful. I am extremely thankful to my wife Sudha who not only encouraged me throughout but also drew all the Figures and Schemes of this book. I also thank my children Adithya and Aarathi for their constant concern on the progress of this book. I express my acknowledgment to the editorial team of Springer-Verlag for their cooperation.
Download or read book Polymeric Materials with Antimicrobial Activity written by Alexandra Muñoz-Bonilla and published by Royal Society of Chemistry. This book was released on 2013-11-13 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Antimicrobial polymers are materials that prevent microorganism growth and are needed for many everyday applications from food packaging and water treatment to medicine and healthcare. This new book covers different areas of antimicrobial materials based on polymers including chitosan, polymers with ammonium and phosphonium groups, polymer nanofibers, carbon-based polymer Nanocomposites, polymeric and non-polymeric metal complexes, and biomimetic materials. By combining the information of different materials as well as antimicrobial action modes and applications within one source, the book provides a general summary of the field. Polymeric Materials with Antimicrobial Activity starts with a general introduction to antimicrobial polymers and presents the most common types of microorganisms (bacteria, fungi, yeast and algae) along with the main areas of application of antimicrobial polymeric materials. Specific chapters then detail different polymer systems covering the fundamental issues of synthesis, characterization, physico-chemical properties and applications. With contributions from leading scientists the book is suitable for researchers in polymers, chemistry, biology and materials science interested in an overview of antimicrobial polymeric materials as well as the recent advances in their synthesis, properties and applications.
Download or read book Vulcanizable Composition for Chlorine containing Polymer written by T. Yamada and published by . This book was released on 1982 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modification of Polymers written by Charles E. Carraher and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: The sheer volume of topics which could have been included under our general title prompted us to make some rather arbitrary decisions about content. Modification by irradiation is not included because the activity in this area is being treated elsewhere. We have chosen to emphasize chemical routes to modification and have striven to pre sent as balanced a representation of current activity as time and page count permit. Industrial applications, both real and potential, are included. Where appropriate, we have encouraged the contributors to include review material to help provide the reader with adequate context. The initial chapter is a review from a historical perspective of polymer modification and contains an extensive bibliography. The remainder of the book is divided into four general areas: Reactions and Preparation of Copolymers Reactions and Preparation of Block and Graft Copolymers Modification Through Condensation Reactions Applications The chemical modification of homopolymers such as polyvinylchlo ride, polyethylene, poly(chloroalkylene sulfides), polysulfones, poly chloromethylstyrene, polyisobutylene, polysodium acrylate, polyvinyl alcohol, polyvinyl chloroformate, sulfonated polystyrene; block and graft copolymers such as poly(styrene-block-ethylene-co-butylene block-styrene), poly(I,4-polybutadiene-block ethylene oxide), star chlorine-telechelic polyisobutylene, poly(isobutylene-co-2,3-dimethyl- 1,3-butadiene), poly(styrene-co-N-butylmethacrylate); cellulose, dex tran and inulin, is described.
