Download or read book Production Chemicals for the Oil and Gas Industry written by Malcolm A. Kelland and published by CRC Press. This book was released on 2014-03-13 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text discusses a wide variety of production chemicals used by the oil and gas industry for down-hole and topside applications both onshore and offshore. It reviews all past and present classes of production chemicals, providing numerous difficult-to-obtain references. Unlike other texts that focus on how products perform in the field, this book focuses on the specific structures of chemicals that are known to deliver the required or desired performance. Where known, it also details the environmental aspects of the chemicals discussed and their success in the field.
Download or read book Oil Field Chemicals written by Johannes Fink and published by Elsevier. This book was released on 2003-08-19 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oil field chemicals are gaining increasing importance, as the resources of crude oil are decreasing. An increasing demand of more sophisticated methods in the exploitation of the natural resources emerges for this reason. This book reviews the progress in the area of oil field chemicals and additives of the last decade from a rather chemical view. The material presented is a compilation from the literature by screening critically approximately 20,000 references. The text is ordered according to applications, just in the way how the jobs are emerging in practice. It starts with drilling, goes to productions and ends with oil spill. Several chemicals are used in multiple disciplines, and to those separate chapters are devoted. Two index registers are available, an index of chemical substances and a general index. * Gives an introduction to the chemically orientated petroleum engineer. * Provides the petroleum engineer involved with research and development with a quick reference tool. * Covers interdisciplinary matter, i.e. connects petroleum recovery and handling with chemical aspects.
Download or read book Petroleum Engineer s Guide to Oil Field Chemicals and Fluids written by Johannes Fink and published by Gulf Professional Publishing. This book was released on 2011-05-13 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum Engineer's Guide to Oil Field Chemicals and Fluids is a comprehensive manual that provides end users with information about oil field chemicals, such as drilling muds, corrosion and scale inhibitors, gelling agents and bacterial control. This book is an extension and update of Oil Field Chemicals published in 2003, and it presents a compilation of materials from literature and patents, arranged according to applications and the way a typical job is practiced. The text is composed of 23 chapters that cover oil field chemicals arranged according to their use. Each chapter follows a uniform template, starting with a brief overview of the chemical followed by reviews, monomers, polymerization, and fabrication. The different aspects of application, including safety and environmental impacts, for each chemical are also discussed throughout the chapters. The text also includes handy indices for trade names, acronyms and chemicals. Petroleum, production, drilling, completion, and operations engineers and managers will find this book invaluable for project management and production. Non-experts and students in petroleum engineering will also find this reference useful. Chemicals are ordered by use including drilling muds, corrosion inhibitors, and bacteria control Includes cutting edge chemicals and polymers such as water soluble polymers and viscosity control Handy index of chemical substances as well as a general chemical index
Download or read book Production Chemicals for the Oil and Gas Industry written by Malcolm A. Kelland and published by CRC Press. This book was released on 2016-04-19 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern production methods and environmental constraints demand chemical solutions. And as oilfields age, the need for chemicals to ensure steady production increases. Production Chemicals for the Oil and Gas Industry describes classes of production chemicals for use topside and downhole in the upstream oil and gas industry. It includes coverage of
Download or read book Production Chemicals for the Oil and Gas Industry Second Edition written by Malcolm A. Kelland and published by CRC Press. This book was released on 2014-03-13 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Production chemistry issues result from changes in well stream fluids, both liquid and gaseous, during processing. Since crude oil production is characterized by variable production rates and unpredictable changes to the nature of the produced fluids, it is essential for production chemists to have a range of chemical additives available for rectifying issues that would not otherwise be fully resolved. Modern production methods, the need to upgrade crude oils of variable quality, and environmental constraints demand chemical solutions. Thus, oilfield production chemicals are necessary to overcome or minimize the effects of the production chemistry problems. Production Chemicals for the Oil and Gas Industry, Second Edition discusses a wide variety of production chemicals used by the oil and gas industry for down-hole and topside applications both onshore and offshore. Incorporating the large amount of research and applications since the first edition, this new edition reviews all past and present classes of production chemicals, providing numerous difficult-to-obtain references, especially SPE papers and patents. Unlike other texts that focus on how products perform in the field, this book focuses on the specific structures of chemicals that are known to deliver the required or desired performance—information that is very useful for research and development. Each updated chapter begins by introducing a problem, such as scale or corrosion, for which there is a production chemical. The author then briefly discusses all chemical and nonchemical methods to treat the problem and provides in-depth descriptions of the structural classes of relevant production chemicals. He also mentions, when available, the environmental properties of chemicals and whether the chemical or technique has been successfully used in the field. This edition includes two new chapters and nearly 50 percent more references.
Download or read book Oilfield Chemistry written by Caili Dai and published by Springer. This book was released on 2019-01-18 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides comprehensive information on the youngest member of the petroleum sciences family: Oilfield Chemistry, proposes the chemical agents for addressing current problems, and explains the functions, mechanisms and synergistic effects of various chemical agents
Download or read book Chemicals in the Oil Industry written by P. H. Ogden and published by . This book was released on 1991 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of an international symposium which addressed technical and environmental issues in the oil industry. Attention was given to a review of recent market developments and an examination of how economic trends were expected to continue in the forseeable future.
Download or read book Chemistry in the Oil Industry VII written by Harry Frampton and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the latest in a series of respected volumes that provides an up-to-date review of some of the major chemistry topics related to the oil and gas industry. Divided into four sections, it looks in turn at the latest developments in environmental issues, new technology, applications and flow assurance. This reflects the increasingly important role for chemical technologies in offshore, deep water and challenging environments, allied to developments of low environmental impact chemistry. Regulatory strategies are also discussed, from both the governmental and operational perspective. Overall, Chemistry in the Oil Industry VII presents the latest information on developments in the modern oil industry, which will have an impact on future cost-effectiveness and efficiency. It will be a valuable resource for professionals and consultants within the industry, as well as government agencies and laboratory staff.
Download or read book Oil in the Sea III written by National Research Council and published by National Academies Press. This book was released on 2003-03-14 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the early 1970s, experts have recognized that petroleum pollutants were being discharged in marine waters worldwide, from oil spills, vessel operations, and land-based sources. Public attention to oil spills has forced improvements. Still, a considerable amount of oil is discharged yearly into sensitive coastal environments. Oil in the Sea provides the best available estimate of oil pollutant discharge into marine waters, including an evaluation of the methods for assessing petroleum load and a discussion about the concerns these loads represent. Featuring close-up looks at the Exxon Valdez spill and other notable events, the book identifies important research questions and makes recommendations for better analysis ofâ€"and more effective measures againstâ€"pollutant discharge. The book discusses: Inputâ€"where the discharges come from, including the role of two-stroke engines used on recreational craft. Behavior or fateâ€"how oil is affected by processes such as evaporation as it moves through the marine environment. Effectsâ€"what we know about the effects of petroleum hydrocarbons on marine organisms and ecosystems. Providing a needed update on a problem of international importance, this book will be of interest to energy policy makers, industry officials and managers, engineers and researchers, and advocates for the marine environment.
Download or read book Spills of Diluted Bitumen from Pipelines written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2016-03-22 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diluted bitumen has been transported by pipeline in the United States for more than 40 years, with the amount increasing recently as a result of improved extraction technologies and resulting increases in production and exportation of Canadian diluted bitumen. The increased importation of Canadian diluted bitumen to the United States has strained the existing pipeline capacity and contributed to the expansion of pipeline mileage over the past 5 years. Although rising North American crude oil production has resulted in greater transport of crude oil by rail or tanker, oil pipelines continue to deliver the vast majority of crude oil supplies to U.S. refineries. Spills of Diluted Bitumen from Pipelines examines the current state of knowledge and identifies the relevant properties and characteristics of the transport, fate, and effects of diluted bitumen and commonly transported crude oils when spilled in the environment. This report assesses whether the differences between properties of diluted bitumen and those of other commonly transported crude oils warrant modifications to the regulations governing spill response plans and cleanup. Given the nature of pipeline operations, response planning, and the oil industry, the recommendations outlined in this study are broadly applicable to other modes of transportation as well.
Download or read book Chemistry of Petrochemical Processes written by Sami Matar Ph.D. and published by Elsevier. This book was released on 2001-07-26 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Chemistry of Petrochemical Processes, readers find a handy and valuable source of information containing insights into petrochemical reactions and products, process technology, and polymer synthesis. The book reviews and describes the reactions and processes involved in transforming petroleum-based hydrocarbons into the chemicals that form the basis of the multi-billion dollar petrochemical industry. In addition, the book includes information on new process developments for the production of raw materials and intermediates for petrochemicals that have surfaced since the book's first edition. Provides a quick understanding of the chemical reactions associated with oil and gas processing Contains insights into petrochemical reactions and products, process technology, and polymer synthesis
Download or read book Oil and Gas Production Handbook An Introduction to Oil and Gas Production written by Havard Devold and published by Lulu.com. This book was released on 2013 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemicals in the Oil Industry written by and published by . This book was released on 1983 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemicals in the Oil Industry written by P. H. Ogden and published by . This book was released on 1988 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of the third international symposium on chemicals in the oil industry, held at the University of Manchester in April 1988, are contained in this volume. The conference was organized by the North West region of the Industrial Division of the Royal Society of Chemistry.
Download or read book Separation Technologies for the Industries of the Future written by Panel on Separation Technology for Industrial Reuse and Recycling and published by National Academies Press. This book was released on 1999-01-22 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: Separation processesor processes that use physical, chemical, or electrical forces to isolate or concentrate selected constituents of a mixtureare essential to the chemical, petroleum refining, and materials processing industries. In this volume, an expert panel reviews the separation process needs of seven industries and identifies technologies that hold promise for meeting these needs, as well as key technologies that could enable separations. In addition, the book recommends criteria for the selection of separations research projects for the Department of Energy's Office of Industrial Technology.
Download or read book Chemicals in the Oil Industry written by Lesley Cookson and published by . This book was released on 1998 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aimed at the interface between chemistry and engineering, this book covers a wide range of subjects concerned with the application of chemistry in the oil industry.
Download or read book Waste Management in the Chemical and Petroleum Industries written by Alireza Bahadori and published by John Wiley & Sons. This book was released on 2019-09-10 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unravels fundamental engineering for the treatment, recovery, and disposal of solid waste, sludge and wastewater in the petroleum, chemical, and unconventional oil and gas processing industries This new edition unravels essential requirements for the process design and engineering of the equipment and facilities pertaining to waste management for gas refineries, chemical plants, oil terminals, and petrochemical plants. Updated throughout, Waste Management in the Chemical and Petroleum Industries, Second Edition offers chapters on wastewater treatment; physical unit operations; chemical treatment; biological treatment; and wastewater treatment in unconventional oil and gas industries. It also covers wastewater sewer systems; sewage treatment; and solid waste treatment and disposal. New topics include: water pollution terminals the design procedure for effluent water pollution control spill prevention and control groundwater pollution control wastewater pollution control in crude oil terminals Information on the source of polymeric plants examination of water and wastewater radioactivity soil pollution pipeline leak consequence evaluation Waste Management in the Chemical and Petroleum Industries, Second Edition is an ideal text for researchers and advanced students in chemical, petroleum, and environmental fields, as well as for those in civil engineering.
