Download or read book Chemically Modified Metal Oxide Nanostructures Electrodes for Sensing and Energy Conversion written by Sami Elhag and published by Linköping University Electronic Press. This book was released on 2017-02-02 with total page 89 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of this thesis is the development of scalable, low cost synthesis of metal oxide nanostructures based electrodes and to correlate the chemical modifications with their energy conversion performance. Methods in energy conversion in this thesis have focused on two aspects; a potentiometric chemical sensor was used to determine the analytical concentration of some components of the analyte solution such as dopamine, glucose and glutamate molecules. The second aspect is to fabricate a photo-electrochemical (PEC) cell. The biocompatibility, excellent electro-catalytic activities and fast electron transfer kinetics accompanied with a high surface area to volume ratio; are properties of some metal oxide nanostructures that of a potential for their use in energy conversion. Furthermore, metal oxide nanostructures based electrode can effectively be improved by the physical or a chemical modification of electrode surface. Among these metal oxide nanostructures are cobalt oxide (Co3O4), zinc oxide (ZnO), and bismuth-zincvanadate (BiZn2VO6) have all been studied in this thesis. Metal oxide nanostructures based electrodes are fabricated on gold-coated glass substrate by low temperature (< 100 0C) wet chemicalapproach. X-ray diffraction, x-ray photoelectron spectroscopy and scanning electron microscopy were used to characterize the electrodes while ultraviolet-visible absorption and photoluminescence were used to investigate the optical properties of the nanostructures. The resultant modified electrodes were tested for their performance as chemical sensors and for their efficiency in PEC activities. Efficient chemically modified electrodes were demonstrated through doping with organic additives like anionic, nonionic or cationic surfactants. The organic additives are showing a crucial role in the growth process of metal oxide nanocrystals and hence can beused to control the morphology. These organic additives act also as impurities that would significantly change the conductivity of the electrodes. However, no organic compounds dependence was observed to modify the crystallographic structure. The findings in this thesis indicate the importance of the use of controlled nanostructures morphology for developing efficient functional materials.
Download or read book Metal Oxides in Nanocomposite Based Electrochemical Sensors for Toxic Chemicals written by A. Pandikumar and published by Elsevier. This book was released on 2021-04-21 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal oxide nanomaterials exhibit interesting electrical and photochemical properties because of their size, stability, and high surface area that render them as great choices in fabricating alternative electrode materials for electrochemical energy storage and sensor applications. The hybridization of metal oxides with other materials lead to the improvement in electrical conductivity, stability, and electron transfer kinetics during the electrocatalytic reactions. These key factors result in greater sensitivity of the sensor materials towards the analyte molecules. This book reviews the electrochemical determination of a variety of toxic chemical contaminants using metal oxide-based nanocomposite materials. Ultrasensitive and selective detection of toxic chemical contaminants is important and demanding, especially for monitoring and controlling environmental pollution. In recent years, metal oxide-based nanocomposite materials have shown high potential in the electrochemical detection of heavy metals, inorganic anions, phenolic compounds, pesticides, and chemical warfare reagents. Metal Oxides in Nanocomposite-Based Electrochemical Sensors for Toxic Chemicals comprehensively reviews this topic. In addition to the instrumental simplicity, the electrochemical methods show the improved sensor performance through the synergetic effect of metal oxide and other electroactive nanomaterial present in the nanocomposite. Thus, detailed information on the electrochemical sensing of toxic chemical contaminants using metal oxide-based nanomaterials are discussed. The recent progress in developing electrochemical sensors using metal oxide-based nanocomposite materials and perspectives on future opportunities in sensor research and development are addressed in the book. - Introduces the fundamentals of electrochemical sensors and fabrication of metal oxide sensors of toxic chemicals - Reviews binary, doped, metal oxide-metal, metal oxide-carbon, metal oxide-polymer, metal-boron nitride, metal oxide-clay, and metal oxide- MOF electrodes - Systematically addresses the fabrication, synthesis, performance, mechanisms, detection limits, sensitivity, advantages and limitations and future perspectives of a wide range of metal oxide-based electrochemical sensors
Download or read book Nanostructured Metal Oxide Electrode Materials for Water Purification written by Onoyivwe Monday Ama and published by Springer Nature. This book was released on 2020-04-07 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on the development of nanostructured metal-oxide-based electrode materials for use in water purification. The removal of organic pollutants and heavy metals from wastewater is a growing environmental and societal priority. This book thus focuses primarily on new techniques to modify the nanostructural properties of various solvent-electrolyte combinations to address these issues. Water treatment is becoming more and more challenging due to the ever increasing complexity of the pollutants present, requiring alternative and complementary approaches toward the removal of toxic chemicals, heavy metals and micro-organisms, to name a few. This contributed volume cuts across the fields of electrochemistry, water science, materials science, and nanotechnology, while presenting up-to-date experimental results on the properties and synthesis of metal-oxide electrode materials, as well as their application to areas such as biosensing and photochemical removal of organic wastewater pollutants. Featuring an introductory chapter on electrochemical cells, this book is well positioned to acquaint interdisciplinary researchers to the field, while providing topical coverage of the latest techniques and methodology. It is ideal for students and research professionals in water science, materials science, and chemical and civil engineering.
Download or read book Metal Oxide Based Nanostructured Electrocatalysts for Fuel Cells Electrolyzers and Metal Air Batteries written by Teko Napporn and published by Elsevier. This book was released on 2021-01-30 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide-Based Nanostructured Electrocatalysts for Fuel Cells, Electrolyzers, and Metal-Air Batteries is a comprehensive book summarizing the recent overview of these new materials developed to date. The book is motivated by research that focuses on the reduction of noble metal content in catalysts to reduce the cost associated to the entire system. Metal oxides gained significant interest in heterogeneous catalysis for basic research and industrial deployment. Metal Oxide-Based Nanostructured Electrocatalysts for Fuel Cells, Electrolyzers, and Metal-Air Batteries puts these opportunities and challenges into a broad context, discusses the recent researches and technological advances, and finally provides several pathways and guidelines that could inspire the development of ground-breaking electrochemical devices for energy production or storage. Its primary focus is how materials development is an important approach to produce electricity for key applications such as automotive and industrial. The book is appropriate for those working in academia and R&D in the disciplines of materials science, chemistry, electrochemistry, and engineering. - Includes key aspects of materials design to improve the performance of electrode materials for energy conversion and storage device applications - Reviews emerging metal oxide materials for hydrogen production, hydrogen oxidation, oxygen reduction and oxygen evolution - Discusses metal oxide electrocatalysts for water-splitting, metal-air batteries, electrolyzer, and fuel cell applications
Download or read book Oxide Free Nanomaterials for Energy Storage and Conversion Applications written by Prabhakarn Arunachalam and published by Elsevier. This book was released on 2021-12-01 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oxide Free Nanomaterials for Energy Storage and Conversion Applications covers in depth topics on non-oxide nanomaterials involving transition metal nitrides, carbides, selenides, phosphides, oxynitrides based electrodes, & other non-oxide groups. The current application of nanostructured nonoxides involves their major usage in energy storage and conversion devices variety of applications such as supercapacitor, batteries, dye-sensitized solar cells and hydrogen production applications. The current application of energy storage devices involves their usage of nanostructured non-oxide materials with improved energy and power densities. In this book readers will discover the major advancements in this field during the past decades. The various techniques used to prepare environmentally friendly nanostructured non-oxide materials, their structural and morphological characterization, their improved mechanical and material properties, and finally, current applications and future impacts of these materials are discussed. While planning and fabricating non-oxide materials, the readers must be concern over that they ought to be abundant, cost-efficient and environment-friendly for clean innovation and conceivably be of use in an expansive choice of utilization. The book gives detailed literature on the development of nanostructured non-oxides, their use as energy related devices and their present trend in the industry and market. This book also emphasis on the latest advancement about application of these noble non-oxide based materials for photocatalytic water-splitting. Recent progress on various kinds of both photocatalytic and electrocatalytic nanomaterials is reviewed, and essential aspects which govern catalytic behaviours and the corresponding stability are discussed. The book will give an updated literature on the synthesis, potential applications and future of nanostructured non-oxides in energy related applications. This book is highly useful to researchers working in the field with diversified backgrounds are expected to making the chapter truly interdisciplinary in nature. The contents in the book will emphasize the recent advances in interdisciplinary research on processing, morphology, structure and properties of nanostructured non-materials and their applications in energy applications such as supercapacitors, batteries, solar cells, electrochemical water splitting and other energy applications. Thus, nanotechnology researchers, scientists and experts need to have update of the growing trends and applications in the field of science and technology. Further, the postgraduate students, scientists, researchers and technologists are need to buy this book. - Offers a comprehensive coverage of the nanostructured non-oxide materials and their potential energy applications - Examines the properties of nanostructured non-oxide materials that make them so adaptable - Explores the mechanisms by which nanoparticles interact with each other, showing how these can be used for industrial applications - Shows the how nanostructured non-oxide materials are used in a wide range of industry sectors, containing energy production and storage
Download or read book Metal Oxide Nanostructures for Energy Conversion and Storage written by Xing Sun and published by . This book was released on 2014 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Oxide Nanoparticles 2 Volume Set written by Oliver Diwald and published by John Wiley & Sons. This book was released on 2021-09-14 with total page 903 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Nanoparticles A complete nanoparticle resource for chemists and industry professionals Metal oxide nanoparticles are integral to a wide range of natural and technological processes—from mineral transformation to electronics. Additionally, the fields of engineering, electronics, energy technology, and electronics all utilize metal oxide nanoparticle powders. Metal Oxide Nanoparticles: Formation, Functional Properties, and Interfaces presents readers with the most relevant synthesis and formulation approaches for using metal oxide nanoparticles as functional materials. It covers common processing routes and the assessment of physical and chemical particle properties through comprehensive and complementary characterization methods. This book will serve as an introduction to nanoparticle formulation, their interface chemistry and functional properties at the nanoscale. It will also act as an in-depth resource, sharing detailed information on advanced approaches to the physical, chemical, surface, and interface characterization of metal oxide nanoparticle powders and dispersions. Addresses the application of metal oxide nanoparticles and its economic impact Examines particle synthesis, including the principles of selected bottom-up strategies Explores nanoparticle formulation—a selection of processing and application routes Discusses the significance of particle surfaces and interfaces on structure formation, stability and functional materials properties Covers metal oxide nanoparticle characterization at different length scales With this valuable resource, academic researchers, industrial chemists, and PhD students can all gain insight into the synthesis, properties, and applications of metal oxide nanoparticles.
Download or read book Graphene Based Electrochemical Sensors for Biomolecules written by A. Pandikumar and published by Elsevier. This book was released on 2018-10-22 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphene-Based Electrochemical Sensors for Biomolecules presents the latest on these nanomaterials that have gained a lot of attention based on their unique properties of high mechanical flexibility, large surface area, chemical stability, superior electric and thermal conductivities that render them great choices as alternative electrode materials for electrochemical energy storage and sensor applications. The hybridization of graphene with other nanomaterials induces a synergetic effect, leading to the improvement in electrical conductivity, stability and an enhancement of the electrocatalytic activity of the new nanocomposite material. This book discusses the electrochemical determination of a variety of biomolecules using graphene-based nanocomposite materials. Finally, recent progress in the development of electrochemical sensors using graphene-based nanocomposite materials and perspectives on future opportunities in sensor research and development are discussed in detail. - Covers the importance of detecting biomolecules and the application of graphene and its nanocomposite materials in the detection of a wide variety of bioanalytes - Presents easily understood fundamentals of electrochemical sensing systems and the role of graphene-based nanocomposite materials in research and development
Download or read book Polymer Chemistry Editor s Pick 2021 written by Pellegrino Musto and published by Frontiers Media SA. This book was released on 2021-09-08 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Graphene based Nanocomposite Sensors written by Sarat Kumar Swain and published by Royal Society of Chemistry. This book was released on 2023-10-13 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sensors are significantly relevant to many aspects of life. The advancements in nanotechnology-based sensing systems are giving rise to exciting developments in sensor applications. Recently, nanocomposites have become highly promising candidates for the designing of new chemical sensing and biosensing platforms. Graphene-based nanocomposites have been successfully employed in many sensing applications in view of their excellent physical properties including high surface area, electrical conductivity, flexibility and optical transparency. They provide remarkable advantages such as lower fabrication costs, improved biocompatibility, prominent sensitivity, stability and selectivity for effective real-world implementation. The aim of the book is to give an overview on the properties and novel applications of graphene-based nanocomposites as chemical and biosensors. Chapters highlight various biosensing applications such as diabetes monitoring, cancer cell detection, virus, bacteria, DNA, protein and amino acid sensing, as well as hormone and cholesterol detection. Moreover, chemical sensing applications like gas, alcohol, and food toxin sensing, heavy metal ion detection, and H2O2 sensing are also covered. The book is ideal for postgraduates, analytical chemists, biomedical scientists and researchers in both academic and industrial settings working on materials science, chemical science and nanotechnology.
Download or read book Graphene Science Handbook written by Mahmood Aliofkhazraei and published by CRC Press. This book was released on 2016-04-27 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: An In-Depth Look at the Outstanding Properties of GrapheneThe Graphene Science Handbook is a six-volume set that describes graphene's special structural, electrical, and chemical properties. The book considers how these properties can be used in different applications (including the development of batteries, fuel cells, photovoltaic cells, and supe
Download or read book Handbook of Nanosensors written by Gomaa A. M. Ali and published by Springer Nature. This book was released on with total page 1769 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Semiconductor Nanowires written by J Arbiol and published by Elsevier. This book was released on 2015-03-31 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor nanowires promise to provide the building blocks for a new generation of nanoscale electronic and optoelectronic devices. Semiconductor Nanowires: Materials, Synthesis, Characterization and Applications covers advanced materials for nanowires, the growth and synthesis of semiconductor nanowires—including methods such as solution growth, MOVPE, MBE, and self-organization. Characterizing the properties of semiconductor nanowires is covered in chapters describing studies using TEM, SPM, and Raman scattering. Applications of semiconductor nanowires are discussed in chapters focusing on solar cells, battery electrodes, sensors, optoelectronics and biology. - Explores a selection of advanced materials for semiconductor nanowires - Outlines key techniques for the property assessment and characterization of semiconductor nanowires - Covers a broad range of applications across a number of fields
Download or read book Handbook of Food Nanotechnology written by Seid Mahdi Jafari and published by Academic Press. This book was released on 2020-06-17 with total page 775 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food Nanotechnology: Applications and Approaches is the definitive guide on all aspects of nano-sized ingredients and devices for the food sector. The book brings science and applications together on the nano-scale into nano-structured food materials, with an emphasis on their production, processing, engineering, characterization, and applications of food materials containing true nano-sized dimensions or nano-structures that enable novel/enhanced properties or functions. All chapters emphasize original results relating to experimental, theoretical, computational, and/or applications of nano-materials in food. Topics such as the application of nanotechnology in food processing operations, functional ingredients, quality control, nutraceutical delivery, and packaging of food products are very attractive and beneficial to both academics and practitioners. Finally, the safety of applying nano ingredients and nano devices is covered. - Brings novel applications of nanotechnology in processing food products - Shows how to improve the formulation of food products with nano-structured ingredients - Explores new opportunities in food packaging through nano-structured materials
Download or read book Advanced Electrode Materials written by Ashutosh Tiwari and published by John Wiley & Sons. This book was released on 2016-11-09 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the recent advances in electrode materials and their novel applications at the cross-section of advanced materials. The book is divided into two sections: State-of-the-art electrode materials; and engineering of applied electrode materials. The chapters deal with electrocatalysis for energy conversion in view of bionanotechnology; surfactant-free materials and polyoxometalates through the concepts of biosensors to renewable energy applications; mesoporous carbon, diamond, conducting polymers and tungsten oxide/conducting polymer-based electrodes and hybrid systems. Numerous approaches are reviewed for lithium batteries, fuel cells, the design and construction of anode for microbial fuel cells including phosphate polyanion electrodes, electrocatalytic materials, fuel cell reactions, conducting polymer based hybrid nanocomposites and advanced nanomaterials.
Download or read book Advanced Functional Materials written by Ashutosh Tiwari and published by John Wiley & Sons. This book was released on 2015-05-14 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of their unique properties (size, shape, and surface functions), functional materials are gaining significant attention in the areas of energy conversion and storage, sensing, electronics, photonics, and biomedicine. Within the chapters of this book written by well-known researchers, one will find the range of methods that have been developed for preparation and functionalization of organic, inorganic and hybrid structures which are the necessary building blocks for the architecture of various advanced functional materials. The book discusses these innovative methodologies and research strategies, as well as provides a comprehensive and detailed overview of the cutting-edge research on the processing, properties and technology developments of advanced functional materials and their applications. Specifically, Advanced Functional Materials: Compiles the objectives related to functional materials and provides detailed reviews of fundamentals, novel production methods, and frontiers of functional materials, including metalic oxides, conducting polymers, carbon nanotubes, discotic liquid crystalline dimers, calixarenes, crown ethers, chitosan and graphene. Discusses the production and characterization of these materials, while mentioning recent approaches developed as well as their uses and applications for sensitive chemiresistors, optical and electronic materials, solar hydrogen generation, supercapacitors, display and organic light-emitting diodes, functional adsorbents, and antimicrobial and biocompatible layer formation. This volume in the Advanced Materials Book Series includes twelve chapters divided into two main areas: Part 1: Functional Metal Oxides: Architecture, Design and Applications and Part 2: Multifunctional Hybrid Materials: Fundamentals and Frontiers
Download or read book Transition Metal Oxide Nanostructures for Electrochemical Energy Conversion written by Ksenia Fominykh and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
