Download or read book Handbook of Electrochemistry written by Cynthia G. Zoski and published by Elsevier. This book was released on 2007-02-07 with total page 935 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrochemistry plays a key role in a broad range of research and applied areas including the exploration of new inorganic and organic compounds, biochemical and biological systems, corrosion, energy applications involving fuel cells and solar cells, and nanoscale investigations. The Handbook of Electrochemistry serves as a source of electrochemical information, providing details of experimental considerations, representative calculations, and illustrations of the possibilities available in electrochemical experimentation. The book is divided into five parts: Fundamentals, Laboratory Practical, Techniques, Applications, and Data. The first section covers the fundamentals of electrochemistry which are essential for everyone working in the field, presenting an overview of electrochemical conventions, terminology, fundamental equations, and electrochemical cells, experiments, literature, textbooks, and specialized books. Part 2 focuses on the different laboratory aspects of electrochemistry which is followed by a review of the various electrochemical techniques ranging from classical experiments to scanning electrochemical microscopy, electrogenerated chemiluminesence and spectroelectrochemistry. Applications of electrochemistry include electrode kinetic determinations, unique aspects of metal deposition, and electrochemistry in small places and at novel interfaces and these are detailed in Part 4. The remaining three chapters provide useful electrochemical data and information involving electrode potentials, diffusion coefficients, and methods used in measuring liquid junction potentials. * serves as a source of electrochemical information * includes useful electrochemical data and information involving electrode potentials, diffusion coefficients, and methods used in measuring liquid junction potentials * reviews electrochemical techniques (incl. scanning electrochemical microscopy, electrogenerated chemiluminesence and spectroelectrochemistry)
Download or read book Chemically Modified Metal Oxide Nanostructures Electrodes for Sensing and Energy Conversion written by Sami Elhag and published by Linköping University Electronic Press. This book was released on 2017-02-02 with total page 89 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of this thesis is the development of scalable, low cost synthesis of metal oxide nanostructures based electrodes and to correlate the chemical modifications with their energy conversion performance. Methods in energy conversion in this thesis have focused on two aspects; a potentiometric chemical sensor was used to determine the analytical concentration of some components of the analyte solution such as dopamine, glucose and glutamate molecules. The second aspect is to fabricate a photo-electrochemical (PEC) cell. The biocompatibility, excellent electro-catalytic activities and fast electron transfer kinetics accompanied with a high surface area to volume ratio; are properties of some metal oxide nanostructures that of a potential for their use in energy conversion. Furthermore, metal oxide nanostructures based electrode can effectively be improved by the physical or a chemical modification of electrode surface. Among these metal oxide nanostructures are cobalt oxide (Co3O4), zinc oxide (ZnO), and bismuth-zincvanadate (BiZn2VO6) have all been studied in this thesis. Metal oxide nanostructures based electrodes are fabricated on gold-coated glass substrate by low temperature (< 100 0C) wet chemicalapproach. X-ray diffraction, x-ray photoelectron spectroscopy and scanning electron microscopy were used to characterize the electrodes while ultraviolet-visible absorption and photoluminescence were used to investigate the optical properties of the nanostructures. The resultant modified electrodes were tested for their performance as chemical sensors and for their efficiency in PEC activities. Efficient chemically modified electrodes were demonstrated through doping with organic additives like anionic, nonionic or cationic surfactants. The organic additives are showing a crucial role in the growth process of metal oxide nanocrystals and hence can beused to control the morphology. These organic additives act also as impurities that would significantly change the conductivity of the electrodes. However, no organic compounds dependence was observed to modify the crystallographic structure. The findings in this thesis indicate the importance of the use of controlled nanostructures morphology for developing efficient functional materials.
Download or read book Mimicking the Function of Redox Enzymes with Chemically Modified Electrodes written by Neal Krishna Devaraj and published by . This book was released on 2006 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electroanalysis with Carbon Paste Electrodes written by Ivan Svancara and published by CRC Press. This book was released on 2012-03-09 with total page 669 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of their simple preparation and low expense, carbon pastes and carbon paste electrodes are widely used in a myriad of instrumental measurements. With an emphasis on practical applications, Electroanalysis with Carbon Paste Electrodes provides a comprehensive overview of carbon paste electrodes. The text offers a comprehensive and unprecedentedly wide insight into the realm of the carbon paste material, culminating with a systematic presentation of all the methods and procedures applicable to the determination of a myriad of inorganic and organic substances when employing the individual types and variants of carbon paste-based electrodes, sensors, and detectors. With a lengthy list of up-to-date references, this handy reference source includes many typical as well as specific experimental data, serving as a practical guide for daily laboratory work. More specifically, this monograph, the first of its kind, contains: All types of carbon pastes in contemporary classification ,with particular emphasis on chemically and biologically modified configurations, or newly propagated mixtures made of alternate components Details on the preparation of carbon pastes, with a number of practical hints and recommendations, including some hitherto unreported approaches Practical guidance for experimental laboratory work on the preparation and characterization of carbon pastes, including guides on the testing of newly made mixtures Individual methods and procedures for the determination of hundreds of various substances in a complete survey of applications Nearly 3300 original references presented as full-text citations
Download or read book NanoBiosensing written by Huangxian Ju and published by Springer Science & Business Media. This book was released on 2011-08-18 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will cover the full scope of nanobiosensing, which combines the newest research results in the cross-disciplines of chemistry, biology, and materials science with biosensing and bioanalysis to develop novel detection principles, sensing mechanisms, and device engineering methods. It not only covers the important types of nanomaterials for biosensing applications, including carbon nanotubes, carbon nanofiber, quantum dots, fullerenes, fluorescent and biological molecules, etc., but also illustrates a wide range of sensing principles, including electrochemical detection, fluorescence, chemiluminesence, antibody-antigen interactions, and magnetic detection. The book details novel developments in the methodology and devices of biosensing and bioanalysis combined with nanoscience and nanotechnology, as well as their applications in biomedicine and environmental monitoring. Furthermore, the reported works on the application and biofunction of nanoparticles have attracted extensive attention and interest, thus they are of particular interest to readers. The reader will obtain a rich survey of nanobiosensing technology, including the principles and application of biosensing, the design and biofunctionalization of bionanomaterials, as well as the methodology to develop biosensing devices and bioanalytical systems.
Download or read book Microelectrodes written by Kin Fong Lei and published by Nova Science Publishers. This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the mature development of microfabrication technology, micro-scale electrodes, i.e., microelectrodes, for the electrical observation of activities in micro-scale environment become realisable. This technique opened a new avenue for micro-scale observation and measurement besides the optical technique. This book presents the techniques, structures, and applications of using microelectrodes in a micro-scale environment. It covers a broad spectrum of topics and the state of the art techniques in the field. As such, the book is divided into four sections, comprising 11 chapters written by recognised experts from leading groups around the world. The reader will gain a unique perspective on the challenges and emerging opportunities in the technology of microelectrodes.
Download or read book Electrochemical Surface Modification written by Richard C. Alkire and published by John Wiley & Sons. This book was released on 2008-11-21 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this topical volume, the authors provide in-depth coverage of the vital relationship between electrochemistry and the morphology of thin films and surfaces. Clearly divided into four major sections, the book covers nanoscale dielectric films for electronic devices, superconformal film growth, electrocatalytic properties of transition metal macrocycles, and the use of synchrotron techniques in electrochemistry. All the chapters offer a concise introduction to the relevant topic, as well as supplying numerous references for easy access to further reading and the original literature. The result is must-have reading for electrochemists, physical and surface chemists and physicists, as well as materials scientists and engineers active in the field of spectroscopic methods in electrochemistry.
Download or read book Selective Chemical Analysis with Microelectrodes written by John Ellis Baur and published by . This book was released on 1990 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electrochemical Strategies in Detection Science written by Damien W. M. Arrigan and published by Royal Society of Chemistry. This book was released on 2016 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrochemical methods of chemical analysis have been widely used for many years, the purpose of this volume is to address research and development advances based on new and re-vitalised methods, new materials with enhanced properties and new devices that achieve better electroanalytical signal generation.
Download or read book Electrochemical Sensors Biosensors and their Biomedical Applications written by Xueji Zhang and published by Academic Press. This book was released on 2011-04-28 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book broadly reviews the modem techniques and significant applications of chemical sensors and biosensors. Chapters are written by experts in the field – including Professor Joseph Wang, the most cited scientist in the world and renowned expert on sensor science who is also co-editor. Each chapter provides technical details beyond the level found in typical journal articles, and explores the application of chemical sensors and biosensors to a significant problem in biomedical science, also providing a prospectus for the future.This book compiles the expert knowledge of many specialists in the construction and use of chemical sensors and biosensors including nitric oxide sensors, glucose sensors, DNA sensors, hydrogen sulfide sensors, oxygen sensors, superoxide sensors, immuno sensors, lab on chip, implatable microsensors, et al. Emphasis is laid on practical problems, ranging from chemical application to biomedical monitoring and from in vitro to in vivo, from single cell to animal to human measurement. This provides the unique opportunity of exchanging and combining the expertise of otherwise apparently unrelated disciplines of chemistry, biological engineering, and electronic engineering, medical, physiological. - Provides user-oriented guidelines for the proper choice and application of new chemical sensors and biosensors - Details new methodological advancements related to and correlated with the measurement of interested species in biomedical samples - Contains many case studies to illustrate the range of application and importance of the chemical sensors and biosensors
Download or read book Progress in Inorganic Chemistry Volume 37 written by Stephen J. Lippard and published by John Wiley & Sons. This book was released on 2009-09-17 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive series of volumes on inorganic chemistry provides inorganic chemists with a forum for critical, authoritative evaluations of advances in every area of the discipline. Every volume reports recent progress with a significant, up-to-date selection of papers by internationally recognized researchers, complemented by detailed discussions and complete documentation. Each volume features a complete subject index and the series includes a cumulative index as well.
Download or read book Biosensors written by Donald G. Buerk and published by CRC Press. This book was released on 2014-07-22 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introductory text covers in detail the technology and applications of biosensors in their many forms. It provides an extensive survey of the basic principles, functions and applications of different categories of biosensors. The presentation is concise, systematic and well illustrated. Numerous schematics illustrate design and function.This bo
Download or read book Laboratory Techniques in Electroanalytical Chemistry Second Edition Revised and Expanded written by Peter Kissinger and published by CRC Press. This book was released on 1996-01-23 with total page 1014 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides a practical, intuitive approach to electroanalytical chemistry, presenting fundamental concepts and experimental techniques without the use of technical jargon or unnecessarily extensive mathematics. This edition offers new material on ways of preparing and using microelectrodes, the processes that govern the voltammetric behavior of microelectrodes, methods for characterizing chemically modified electrodes, electrochemical studies at reduced temperatures, and more. The authors cover such topics as analog instrumentation, overcoming solution resistance with stability and grace in potentiostatic circuits, conductivity and conductometry, electrochemical cells, carbon electrodes, film electrodes, microelectrodes, chemically modified electrodes, mercury electrodes, and solvents and supporting electrolytes.
Download or read book Electropolymerization written by Ewa Schab-Balcerzak and published by BoD – Books on Demand. This book was released on 2011-12-22 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, great focus has been placed upon polymer thin films. These polymer thin films are important in many technological applications, ranging from coatings and adhesives to organic electronic devices, including sensors and detectors. Electrochemical polymerization is preferable, especially if the polymeric product is intended for use as polymer thin films, because electrogeneration allows fine control over the film thickness, an important parameter for fabrication of devices. Moreover, it was demonstrated that it is possible to modify the material properties by parameter control of the electrodeposition process. Electrochemistry is an excellent tool, not only for synthesis, but also for characterization and application of various types of materials. This book provides a timely overview of a current state of knowledge regarding the use of electropolymerization for new materials preparation, including conducting polymers and various possibilities of applications.
Download or read book Disposable Electrochemical Sensors for Healthcare Monitoring written by Dr A. Pandikumar and published by Royal Society of Chemistry. This book was released on 2021-05-05 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Disposable electrodes have been widely used as a sensing platform in electrical and electrochemical sensors owing to the possibility of quantitative detection using clinical biomarkers with high precision, sensitivity and reproducibility, which are necessary for accurate diagnosis of the health condition of an individual. This book focusses on the emerging disposable electrochemical sensors in the health sector and the advancement of analytical devices to monitor diabetic, cancer and cardiovascular patients using different nanomaterials. It discusses the upcoming strategies, advantages and the limitations of the existing devices using disposable electrodes. Uniquely, it covers in-depth knowledge of mechanistic features of various designs of screen-printing electrodes and the material aspects required of sensors developed for the healthcare field. It also looks at the portable devices using a variety of materials and the future directions for research in this area. Appealing to the health care industry, this book is aimed at academic and research institutes at both the graduate and postgraduate level. The contributors are leading experts in the field and they are providing guidance for the next decade of research in the field of disposable electrochemical biosensors.
Download or read book Spectroscopic Methods for Nanomaterials Characterization written by Sabu Thomas and published by Elsevier. This book was released on 2017-05-19 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanomaterials Characterization Techniques, Volume Two, part of an ongoing series, offers a detailed analysis of the different types of spectroscopic methods currently being used in nanocharacterization. These include, for example, the Raman spectroscopic method for the characterization of carbon nanotubes (CNTs). This book outlines the different kinds of spectroscopic tools being used for the characterization of nanomaterials and discusses under what conditions each should be used. The book is intended to cover all the major spectroscopic techniques for nanocharacterization, making it an important resource for both the academic community at the research level and the industrial community involved in nanomanufacturing. - Explores how spectroscopy and X-ray-based nanocharacterization techniques are applied in modern industry - Analyzes all the major spectroscopy and X-ray-based nanocharacterization techniques, allowing the reader to choose the best for their situation - Presents a method-orientated approach that explains how to successfully use each technique
Download or read book Microelectrodes Theory and Applications written by Irene Montenegro and published by Springer Science & Business Media. This book was released on 1991-04-30 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of microelectrodes is widely recognised and interest in their application in diverse areas of research has been increasing over the past ten years. In fact, several meetings organized by the International Society of Electrochemistry, The American Chemical Society and The U. S. Electrochemical Society have analysed various aspects of their theory and applications. For this reason it seemed that the time had arrived when scientists from around the world, actively concerned with research in the area of microelectrodes, should meet, exchange ideas and assess the direction of future developments. Furthermore, it seemed appropriate that this meeting should be held as a NATO Advanced Study Institute, so that students and young scientists with research interests in microelectrodes would have the opportunity to interact with experts in the field, establish future collaboration and, hopefully, catalyse new developments in the area. The meeting was held in Alvor, Portugal, in May 1990. This book compiles the lectures delivered in the Institute. It reviews the most important aspects of microelectrodes and points out directions for future research in this field. Several contributions discuss recent developments in theoretical aspects such as the properties of various geometries and computational procedures for solving the equations describing the coupling of mass transport to microelectrodes with heterogeneous electron tranfer and homogeneous chemistry. The materials and methods available for microelectrodes manufacture are presented in some detail. Both steady state and transient techniques are covered and the interaction of theory with experiment is discussed.
