Download or read book Chemical Vapor Deposition of Ceramic Coatings on Metals and Ceramic Fibers written by Jun Co Nable and published by . This book was released on 2005 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ceramic Coatings on Metals Using Atomic Layer Controlled Chemical Vapor Deposition ASSERT 96 written by and published by . This book was released on 2000 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ASSERT research projects that have focused on thin film growth on various substrates examined the adsorption and desorption kinetics of tetrakis and dimethylamine on TiN surfaces. The competition between TDMAYT and DMA for surface sites during TiN growth with TDMAT is a model system to understand reaction product inhibition that affects the conformal deposition of TiN. Studied the adsorption and decomposition of 1,4-disilabutane (DSB) and porous silicon surfaces. DSB is a possible new precursor for SiO2, SiC and Si growth. Explored atomic layer controlled chemical vapor deposition methods to deposit oxide and nitride thin films. Most of this work concentrated on Si3N4 deposition and the catalytic deposition of SiO2 at room temperature using ellipsometry techniques to monitor the film growth. Evaluated the conformality and surface roughness of Si3N4 and SiO2 films deposited with atomic layer controlled growth methods using atomic force microscopy (AFM) techniques. Studies the surface chemistry occurring during the chemical vapor deposition (CVD) of ZrO2 using tetra-tert-butoxy-zirconium (ZTB) as the molecular precursor. Examined ZrO2 films deposited using ZTB as the molecular precursor using AFM and Auger electron spectroscopy depth profiling. Utilized SiO2, TiO2 and Al2O3 atomic layer growth techniques to reduce pore diameters in porous membranes. This controlled reduction in pore size is important for fabricating a molecular sieving membrane for gas sparation applications. Another achievement of the research is the education of students. Several students were funded with the support through the ASSERT program. A former graduate student who continued to work as a post-doctoral fellow in the research group, also contributed to this ASSERT effort.
Download or read book Ceramic Fibers and Coatings written by Committee on Advanced Fibers for High-Temperature Ceramic Composites and published by National Academies Press. This book was released on 1998-05-05 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-temperature ceramic fibers are the key components of ceramic matrix composites (CMCs). Ceramic fiber properties (strength, temperature and creep resistance, for example)-along with the debonding characteristics of their coatings-determine the properties of CMCs. This report outlines the state of the art in high-temperature ceramic fibers and coatings, assesses fibers and coatings in terms of future needs, and recommends promising avenues of research. CMCs are also discussed in this report to provide a context for discussing high-temperature ceramic fibers and coatings.
Download or read book Chemical Vapour Deposition written by Xiu-Tian Yan and published by Springer Science & Business Media. This book was released on 2010-03-23 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Chemical Vapour Deposition: An Integrated Engineering Design for Advanced Materials" focuses on the application of this technology to engineering coatings and, in particular, to the manufacture of high performance materials, such as fibre reinforced ceramic composite materials, for structural applications at high temperatures. This book aims to provide a thorough exploration of the design and applications of advanced materials, and their manufacture in engineering. From physical fundamentals and principles, to optimization of processing parameters and other current practices, this book is designed to guide readers through the development of both high performance materials and the design of CVD systems to manufacture such materials. "Chemical Vapour Deposition: An Integrated Engineering Design for Advanced Materials" introduces integrated design and manufacture of advanced materials to researchers, industrial practitioners, postgraduates and senior undergraduate students.
Download or read book Chemical Vapor Deposition of Refractory Metals and Ceramics written by and published by . This book was released on 1991 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Ceramic Coatings and Materials for Extreme Environments III Volume 34 Issue 3 written by Hua-Tay Lin and published by John Wiley & Sons. This book was released on 2013-11-25 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramic Engineering and Science Proceedings Volume 34, Issue 3 - Advanced Ceramic Coatings and Materials for Extreme Environments III A collection of 12 papers from The American Ceramic Society’s 37th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 27-February 1, 2013. This issue includes papers presented in the Advanced Ceramic Coatings and Systems and Next Generation Technologies for Innovative Surface Coatings symposia.
Download or read book Ceramic Coatings for High Temperature Environments written by Amirhossein Pakseresht and published by Springer Nature. This book was released on 2024-01-06 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the recent trends in thermal and environmental barrier coatings and their applications in extreme environments. It introduces the state of the art in coating materials and processes for high and ultrahigh-temperature environments and identifies areas for improvement in materials selection, performance upgrades, design considerations, and manufacturing methods. This book also covers fundamental studies involving modelling, creating coating architectures, coating preparation methods, and coating capability throughout a wide temperature range. The book examines a variety of high-temperature coatings prepared through various synthesis processes such as thermal spraying, electron beam evaporation, and sol–gel methods. This book also covers ultrahigh-temperature ceramic (UHTC) materials and provides a brief overview of the synthesis method, densification processes, and coating methods along with the properties and applications of emerging high entropy UHTCs. With contributions from international researchers active in the field, this edited book features the most recent and up-to-date literature references for a broad readership consisting of academic and industrial professionals. It is suitable for graduate students as well as materials scientists and engineers working in the area of high and ultrahigh-temperature ceramic materials.
Download or read book Handbook of Chemical Vapor Deposition written by Hugh O. Pierson and published by William Andrew. This book was released on 2012-12-02 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Chemical Vapor Deposition: Principles, Technology and Applications provides information pertinent to the fundamental aspects of chemical vapor deposition. This book discusses the applications of chemical vapor deposition, which is a relatively flexible technology that can accommodate many variations. Organized into 12 chapters, this book begins with an overview of the theoretical examination of the chemical vapor deposition process. This text then describes the major chemical reactions and reviews the chemical vapor deposition systems and equipment used in research and production. Other chapters consider the materials deposited by chemical vapor deposition. This book discusses as well the potential applications of chemical vapor deposition in semiconductors and electronics. The final chapter deals with ion implantation as a major process in the fabrication of semiconductors. This book is a valuable resource for scientists, engineers, and students. Production and marketing managers and suppliers of equipment, materials, and services will also find this book useful.
Download or read book Chemical Vapor Deposition of Refractory Metals and Ceramics II Volume 250 written by Theodore M. Besman and published by . This book was released on 1992-05-22 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: The MRS Symposium Proceeding series is an internationally recognised reference suitable for researchers and practitioners.
Download or read book Chemical Vapor Deposition of Refractory Metals and Ceramics written by and published by . This book was released on 1994 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallurgical and Ceramic Protective Coatings written by K.H. Stern and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface engineering is an increasingly important field and consequently those involved need to be aware of the vast range of technologies available to modify surfaces. This text provides an up-to-date, authoritative exposition of the major condensed phase methods used for producing metallurgical and ceramic coatings. Each method is discussed thoroughly by an expert in that field. In each chapter the principle of the method, its range of applications and technical aspects involved are described. The book not only informs the reader about established technologies familiar only to specialists, but also details activity on the frontier of coating technology providing an insight into those potential technologies not yet fully developed but which should emerge in the near future.
Download or read book An Apparatus for Coating Ceramic Monofilaments Via Chemical Vapor Deposition written by and published by . This book was released on 1992 with total page 35 pages. Available in PDF, EPUB and Kindle. Book excerpt: A description is given of the design, construction, and operation of an apparatus for the coating of ceramic monofilaments using chemical vapor deposition. Coated filaments are desired in order to investigate issues pertaining to the processing and mechanical properties of ceramic matrix composites. Specific examples are given of processes and results of coating experiments for several different materials including metals and ceramics.
Download or read book Advanced Ceramic Coatings and Interfaces III written by Hua-Tay Lin and published by John Wiley & Sons. This book was released on 2009-02-11 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides a one-stop resource, compiling current research on ceramic coatings and interfaces. It is a collection of papers from The American Ceramic Society s 32nd International Conference on Advanced Ceramics and Composites, January 27-February 1, 2008. Papers include developments and advances in ceramic coatings for structural, environmental, and functional applications. Articles are logically organized to provide insight into various aspects of ceramic coatings and interfaces. This is a valuable, up-to-date resource for researchers in industry, government, or academia who work in ceramics engineering.
Download or read book Ceramic Fiber Coatings Development and Demonstration written by and published by . This book was released on 1993 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this program was to develop fiber coating techniques by gas phase and liquid phase processes for interface control in ceramic matrix and metal matrix composites. Thermochemical evaluations of fiber/coating/matrix systems were performed theoretically and experimentally. Liquid phase processes were developed mainly for oxide coatings. Gas phase processes were developed for-carbide, nitride and boride coatings. Coatings were produced on continuous fiber tows and woven fabric. A small scale continuous fabric coater was designed and constructed. Coated fiber tows were infiltrated with silicon nitride matrix by chemical vapor deposition in order to study fiber matrix interactions. Composite coupons were made from Nicalon cloth and infiltrated with silicon nitride. Samples coated with high temperature BN showed flexural strengths up to 350 MPa ... Ceramic Fiber Coating, Chemical Vapor Deposition, Sol-Gel Ceramic Matrix Composites, Metal Matrix Composites.
Download or read book Metallic and Ceramic Coatings written by M. G. Hocking and published by Longman Scientific and Technical. This book was released on 1989 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: Much of this book consists of a review of the subject, in amended form, which the authors were commissioned to write by the EEC. It should be useful to those in the fields of materials science, physics, mechanical engineering, chemical engineering, metallurgy and aerospace engineering.
Download or read book Advanced Ceramic Coatings for Energy Applications written by Ram Gupta and published by Elsevier. This book was released on 2024-02-16 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart ceramic coatings containing multifunctional components are now finding application in transportation and automotive industries, in electronics, and energy, sectors, in aerospace and defense, and in industrial goods and healthcare. Their wide application and stability in harsh environments are only possible due to the stability of the inorganic components that are used in ceramic coatings. Ceramic coatings are typically silicon nitride, chromia, hafnia, alumina, alumina-magnesia, silica, silicon carbide, titania, and zirconia-based compositions. The increased demand for these materials and their application in energy, transportation, and the automotive industry, are considered, to be the main drivers. Advanced Ceramic Coatings for Energy Applications covers recent developments in conducting electrodes, photovoltaics, solar cells, battery applications, fuel cells, electrocatalysts, photocatalysts and supercapacitors. The book is one of four volumes that together provide a comprehensive resource in the field of Advanced Ceramic Coatings, also including titles covering: fundamentals, manufacturing, and classification; biomedical applications; and emerging applications. The books will be extremely useful for academic and industrial researchers and practicing engineers who need to find reliable and up-to-date information about recent progresses and new developments in the field of advanced ceramic coatings. It will also be of value to early career scientists providing background knowledge to the field. Includes comprehensive coverage of advanced ceramic coatings for energy applications Features the latest progress and recent technological developments Includes comparisons to other coatings types (e.g., polymers, metals, and enamel) to demonstrate potential, limitations, and differences Contains extensive case studies and worked examples
Download or read book Suspension Plasma Spray Coating of Advanced Ceramics written by Navid Hosseinabadi and published by CRC Press. This book was released on 2022-09-01 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Suspension Plasma Spray Coating of Advanced Ceramics presents the significance of suspension plasma spray coating of ceramics for thermal barrier applications. It covers suspension formation and optimization in different oxide and non-oxide mixtures and ceramic matrix composites (CMC) of sub-micron and nanosized powders. Enabling readers to understand the importance of thermally inert and insulating ceramic coatings on metals and alloys, the book explains how to improve their utilization in applications, such as turbine blades or diesel engines, gas turbines, and coating methods. This book also discusses advanced topics on nanomaterials coatings in monolithic or composite forms as thermal barriers through organic and non-organic based suspensions using high energy plasma spray methods. Features: Presents significant thermal barrier properties using high energy plasma spray methods. Explores advanced surface modification techniques. Covers monolithic, composite, and solid solution ceramics coating. Discusses high precision coating methods. The book will be useful for professional engineers working in surface modification and researchers studying materials science and engineering, corrosion, and abrasion.
