Download or read book Chemical Sensors 9 and MEMS NEMS 9 written by G. Hunter and published by The Electrochemical Society. This book was released on 2010-10 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue of ECS Transactions is a compilation of papers presented at the 218th Meeting of the Electrochemical Society, held in Las Vegas from October 10 - 15, 2010. The papers presented covered the research and development in the field of chemical (gas, ion, bio and other) sensors, including molecular recognition surface, transduction methods, and integrated and micro sensor systems, as well as all aspects of MEMS/NEMS technology, including micro/nanomachining, fabrication processes, packaging, and the application of these structures and processes to the miniaturization of chemical sensors, physical sensors, biosensors, miniature chemical analysis systems and other devices.
Download or read book Chemical Sensors 7 and MEMS NEMS 7 written by Peter J. Hesketh and published by The Electrochemical Society. This book was released on 2006 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest developments in chemical and biological sensor research and development. Topics include: 1. new selective species recognition surfaces and materials; 2. molecular recognition materials and approaches to minimize non-specific binding; 3. semi-selective species recognition materials; 4. novel methods for signal processing, signal amplification, and detection; 5. detection systems for multiple analytes in complex samples; 6. sensor arrays; and 7. analytical systems and approaches.
Download or read book Development of CMOS MEMS NEMS Devices written by Jaume Verd and published by MDPI. This book was released on 2019-06-25 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro and nano-electro-mechanical system (M/NEMS) devices constitute key technological building blocks to enable increased additional functionalities within Integrated Circuits (ICs) in the More-Than-Moore era, as described in the International Technology Roadmap for Semiconductors. The CMOS ICs and M/NEMS dies can be combined in the same package (SiP), or integrated within a single chip (SoC). In the SoC approach the M/NEMS devices are monolithically integrated together with CMOS circuitry allowing the development of compact and low-cost CMOS-M/NEMS devices for multiple applications (physical sensors, chemical sensors, biosensors, actuators, energy actuators, filters, mechanical relays, and others). On-chip CMOS electronics integration can overcome limitations related to the extremely low-level signals in sub-micrometer and nanometer scale electromechanical transducers enabling novel breakthrough applications. This Special Issue aims to gather high quality research contributions dealing with MEMS and NEMS devices monolithically integrated with CMOS, independently of the final application and fabrication approach adopted (MEMS-first, interleaved MEMS, MEMS-last or others).]
Download or read book Advanced MEMS NEMS Fabrication and Sensors written by Zhuoqing Yang and published by Springer Nature. This book was released on 2021-10-12 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book begins by introducing new and unique fabrication, micromachining, and integration manufacturing methods for MEMS (Micro-Electro-Mechanical Systems) and NEMS (Nano-Electro-Mechanical Systems) devices, as well as novel nanomaterials for sensor fabrications. The second section focuses on novel sensors based on these emerging MEMS/NEMS fabrication methods, and their related applications in industrial, biomedical, and environmental monitoring fields, which makes up the sensing layer (or perception layer) in IoT architecture. This authoritative guide offers graduate students, postgraduates, researchers, and practicing engineers with state-of-the-art processes and cutting-edge technologies on MEMS /NEMS, micro- and nanomachining, and microsensors, addressing progress in the field and prospects for future development. Presents latest international research on MEMS/NEMS fabrication technologies and novel micro/nano sensors; Covers a broad spectrum of sensor applications; Written by leading experts in the field.
Download or read book Springer Handbook of Nanotechnology written by Bharat Bhushan and published by Springer. This book was released on 2017-11-05 with total page 1704 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook has become the definitive reference work in the field of nanoscience and nanotechnology, and this 4th edition incorporates a number of recent new developments. It integrates nanofabrication, nanomaterials, nanodevices, nanomechanics, nanotribology, materials science, and reliability engineering knowledge in just one volume. Furthermore, it discusses various nanostructures; micro/nanofabrication; micro/nanodevices and biomicro/nanodevices, as well as scanning probe microscopy; nanotribology and nanomechanics; molecularly thick films; industrial applications and nanodevice reliability; societal, environmental, health and safety issues; and nanotechnology education. In this new edition, written by an international team of over 140 distinguished experts and put together by an experienced editor with a comprehensive understanding of the field, almost all the chapters are either new or substantially revised and expanded, with new topics of interest added. It is an essential resource for anyone working in the rapidly evolving field of key technology, including mechanical and electrical engineers, materials scientists, physicists, and chemists.
Download or read book Nanosensors written by Vinod Kumar Khanna and published by CRC Press. This book was released on 2021-02-25 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanosensors are innovative devices that exploit the unique properties exhibited by matter at the nanoscale. A growing and exciting field, nanosensors have recently spurred considerable research endeavors across the globe, driving a need for the development of new device concepts and engineering nanostructured materials with controlled properties. Nanosensors: Physical, Chemical, and Biological, Second Edition offers a panoramic view of the field and related nanotechnologies with extraordinary clarity and depth. Presenting an interdisciplinary approach, blending physics, chemistry and biology, this new edition is broad in scope and organised into six parts; beginning with the fundamentals before moving onto nanomaterials and nanofabrication technologies in the second part. The third and fourth parts provide a critical appraisal of physical nanosensors, and explore the chemical and biological categories of nanosensors. The fifth part sheds light on the emerging applications of nanosensors in the sectors of society, industry, and defense and details the cutting-edge applications of state-of-the-art nanosensors in environmental science, food technology, medical diagnostics, and biotechnology. The final part addresses self-powering and networking issues of nanosensors, and provides glimpses of future trends. This is an ideal reference for researchers and industry professionals engaged in the frontier areas of material science and semiconductor fabrication as well as graduate students in physics and engineering pursuing electrical engineering and electronics courses with a focus on nanoscience and nanotechnology. Key features: Provides an updated, all-encompassing exploration of contemporary nanosensors and highlights the exclusive nanoscale properties on which nanosensors are designed. Presents an accessible approach with a question-and-answer format to allow an easy grasp of the intricacies involved in the complex working mechanisms of devices. Contains clear, illustrative diagrams enabling the visualization of nanosensor operations, along with worked examples, end of chapter questions, and exhaustive up-to-date bibliographies appended to each chapter.
Download or read book Global Perspectives of Nanoscience and Engineering Education written by Kurt Winkelmann and published by Springer. This book was released on 2016-06-28 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the perspectives of nanotechnology educators from around the world. Experts present the pressing challenges of teaching nanoscience and engineering to students in all levels of education, postsecondary and informal environments. The book was inspired by the 2014 NSF workshop for Nanoscience and Engineering Education. Since nanotechnology is a relatively new field, authors present recommendations for designing nanotechnology education programs. The chapters describe methods to teach specific topics, such as probe microscopy, size and scale, and nanomaterial safety, in classrooms around the world. Other chapters describe the ways that organizations like NNIN and the NISE Network have influenced informal nanotechnology education. Information technology plays a growing role in all types of education and several chapters are devoted to describing ways how educators can use online curricula for teaching nanotechnology to students from preschool to graduate school.
Download or read book Mems Nems written by Cornelius T. Leondes and published by Springer Science & Business Media. This book was released on 2007-10-08 with total page 2142 pages. Available in PDF, EPUB and Kindle. Book excerpt: This significant and uniquely comprehensive five-volume reference is a valuable source for research workers, practitioners, computer scientists, students, and technologists. It covers all of the major topics within the subject and offers a comprehensive treatment of MEMS design, fabrication techniques, and manufacturing methods. It also includes current medical applications of MEMS technology and provides applications of MEMS to opto-electronic devices. It is clearly written, self-contained, and accessible, with helpful standard features including an introduction, summary, extensive figures and design examples with comprehensive reference lists.
Download or read book MEMS NEMS Sensors written by Goutam Koley and published by MDPI. This book was released on 2019-11-20 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the ever-expanding applications of micro/nano-electromechanical systems (NEMS/MEMS) as sensors and actuators, interest in their development has rapidly expanded over the past decade. Encompassing various excitation and readout schemes, the MEMS/NEMS devices transduce physical parameter changes, such as temperature, mass or stress, caused by changes in desired measurands, to electrical signals that can be further processed. Some common examples of NEMS/MEMS sensors include pressure sensors, accelerometers, magnetic field sensors, microphones, radiation sensors, and particulate matter sensors.
Download or read book Environmental Chemical and Medical Sensors written by Shantanu Bhattacharya and published by Springer. This book was released on 2017-12-22 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the fundamentals of sensor technologies as well as the recent research for the development of environmental, chemical and medical sensor technologies. Chapters include current research on microflow cytometry, microfluidic devices, colorimetric sensors, and the development of low-cost optical densitometric sensors and paper based analytical devices for environmental and biomedical applications. Special focus has been given to nanotechnology and nanostructures- their fabrication, uses and utility in different fields of research such as for the design of tools for medical diagnostics, therapeutics, as well as for detection and estimation of pollutant levels in water and air quality monitoring. This book is intended as a resource for researchers working in the field of sensor development across the world.
Download or read book Nanotribology and Nanomechanics II written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2011-05-30 with total page 1025 pages. Available in PDF, EPUB and Kindle. Book excerpt: The comprehensive reference and textbook serves as a timely, practical introduction to the principles of nanotribology and nanomechanics. Assuming some familiarity with macroscopic tribology, the book comprises chapters by internationally recognized experts, who integrate knowledge of the field from the mechanics and materials-science perspectives. They cover key measurement techniques, their applications, and theoretical modelling of interfaces, each beginning their contributions with macro- and progressing to microconcepts.
Download or read book Physics and Technology of Silicon Carbide Devices written by Yasuto Hijikata and published by BoD – Books on Demand. This book was released on 2012-10-16 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently, some SiC power devices such as Schottky-barrier diodes (SBDs), metal-oxide-semiconductor field-effect-transistors (MOSFETs), junction FETs (JFETs), and their integrated modules have come onto the market. However, to stably supply them and reduce their cost, further improvements for material characterizations and those for device processing are still necessary. This book abundantly describes recent technologies on manufacturing, processing, characterization, modeling, and so on for SiC devices. In particular, for explanation of technologies, I was always careful to argue physics underlying the technologies as much as possible. If this book could be a little helpful to progress of SiC devices, it will be my unexpected happiness.
Download or read book Nanotribology and Nanomechanics written by Bharat Bhushan and published by Springer. This book was released on 2017-04-05 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook and comprehensive reference source and serves as a timely, practical introduction to the principles of nanotribology and nanomechanics. This 4th edition has been completely revised and updated, concentrating on the key measurement techniques, their applications, and theoretical modeling of interfaces. It provides condensed knowledge of the field from the mechanics and materials science perspectives to graduate students, research workers, and practicing engineers.
Download or read book Chemical Sensors written by Ghenadii Korotcenkov and published by Momentum Press. This book was released on 2012-08-15 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical sensors are integral to the automation of myriad industrial processes and everyday monitoring of such activities as public safety, engine performance, medical therapeutics, and many more. This 4 volume reference work covering simulation and modeling will serve as the perfect complement to Momentum Press's 6 volume reference works "Chemical Sensors: Fundamentals of Sensing Materials" and "Chemical Sensors: Comprehensive Sensor Technologies", which present detailed information related to materials, technologies, construction and application of various devices for chemical sensing. This 4 volume comprehensive reference work analyzes approaches used for computer simulation and modeling in various fields of chemical sensing and discusses various phenomena important for chemical sensing such as bulk and surface diffusion, adsorption, surface reactions, sintering, conductivity, mass transport, interphase interactions, etc. In this work it will be shown that theoretical modeling and simulation of the processes, being a basic for chemical sensors operation, could provide considerable progress in choosing both optimal materials and optimal configurations of sensing elements for using in chemical sensors. Each simulation and modeling volume in the present series reviews modeling principles and approaches peculiar to specific groups of materials and devices applied for chemical sensing. Volume 3: Solid State Devices covers phenomenological and molecular modelling of processes which control sensing characteristics and parameters of various solid state chemical sensors including surface acoustic wave, MIS, microcantilever, thermoelectric-based devices and sensor array aimed for electronic nose design. Modeling of nanomaterials and nanosystems promising for solid state chemical sensors design is analyzed as well.
Download or read book Next Generation Sensors and Systems written by Subhas Chandra Mukhopadhyay and published by Springer. This book was released on 2015-07-28 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by experts in their area of research, this book has outlined the current status of the fundamentals and analytical concepts, modelling and design issues, technical details and practical applications of different types of sensors and discussed about the trends of next generation of sensors and systems happening in the area of Sensing technology. This book will be useful as a reference book for engineers and scientist especially the post-graduate students find will this book as reference book for their research on wearable sensors, devices and technologies.
Download or read book MEMS and NEMS written by Sergey Edward Lyshevski and published by CRC Press. This book was released on 2018-10-03 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of micro- and nano-mechanical systems (MEMS and NEMS) foreshadows momentous changes not only in the technological world, but in virtually every aspect of human life. The future of the field is bright with opportunities, but also riddled with challenges, ranging from further theoretical development through advances in fabrication technologies, to developing high-performance nano- and microscale systems, devices, and structures, including transducers, switches, logic gates, actuators and sensors. MEMS and NEMS: Systems, Devices, and Structures is designed to help you meet those challenges and solve fundamental, experimental, and applied problems. Written from a multi-disciplinary perspective, this book forms the basis for the synthesis, modeling, analysis, simulation, control, prototyping, and fabrication of MEMS and NEMS. The author brings together the various paradigms, methods, and technologies associated with MEMS and NEMS to show how to synthesize, analyze, design, and fabricate them. Focusing on the basics, he illustrates the development of NEMS and MEMS architectures, physical representations, structural synthesis, and optimization. The applications of MEMS and NEMS in areas such as biotechnology, medicine, avionics, transportation, and defense are virtually limitless. This book helps prepare you to take advantage of their inherent opportunities and effectively solve problems related to their configurations, systems integration, and control.
Download or read book Smart Nanotechnology with Applications written by Cherry Bhargava and published by CRC Press. This book was released on 2020-12-16 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive reference text discusses advance concepts and applications in the field of nanotechnology. The text presents a detailed discussion of key important concepts including nanomaterials and nanodevices, nano-bio interface, nanoscale memories, and semiconductor nanotechnology. It discusses applications of nanotechnology in the fields of aerospace engineering, cosmetic industry, pharmaceutical science, food industry, and the textile industry. The text will be useful for senior undergraduate and graduate students in the field of electrical engineering, electronics engineering, nanotechnology, and pharmaceutical science. Discussing fundamental, advanced concepts and their applications in a single volume, this text will be useful as a reference text for senior undergraduate and graduate students in the field of electrical engineering, electronics engineering, nanotechnology, and pharmaceutical science. It comprehensively discusses important concepts such as nano-robotics, carbon-based nanomaterials, and nanoscale memories. The text discusses advanced concepts of nanotechnology and its applications in the fields of textile, pharmaceutical sciences, aerospace, and food industry. It will be an ideal reference text for senior undergraduate and graduate students in the field of electrical engineering, electronics engineering, nanotechnology, and nanoscience.
