Download or read book Physics and Technology of Silicon Carbide Devices written by George Gibbs and published by . This book was released on 2016-10-01 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon (Si) is by far the most widely used semiconductor material for power devices. On the other hand, Si-based power devices are approaching their material limits, which has provoked a lot of efforts to find alternatives to Si-based power devices for better performance. With the rapid innovations and developments in the semiconductor industry, Silicon Carbide (SiC) power devices have progressed from immature prototypes in laboratories to a viable alternative to Si-based power devices in high-efficiency and high-power density applications. SiC devices have numerous persuasive advantages--high-breakdown voltage, high-operating electric field, high-operating temperature, high-switching frequency and low losses. Silicon Carbide (SiC) devices belong to the so-called wide band gap semiconductor group, which offers a number of attractive characteristics for high voltage power semiconductors when compared to commonly used silicon (Si). Recently, some SiC power devices, for example, Schottky-barrier diodes (SBDs), metal-oxide-semiconductor field-effecttransistors (MOSFETs), junction FETs (JFETs), and their integrated modules have come onto the market. Physics and Technology of Silicon Carbide Devices abundantly describes recent technologies on manufacturing, processing, characterization, modeling, etc. for SiC devices.

Download or read book Fundamentals of Silicon Carbide Technology written by Tsunenobu Kimoto and published by John Wiley & Sons. This book was released on 2014-11-24 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive introduction and up-to-date reference to SiC power semiconductor devices covering topics from material properties to applications Based on a number of breakthroughs in SiC material science and fabrication technology in the 1980s and 1990s, the first SiC Schottky barrier diodes (SBDs) were released as commercial products in 2001. The SiC SBD market has grown significantly since that time, and SBDs are now used in a variety of power systems, particularly switch-mode power supplies and motor controls. SiC power MOSFETs entered commercial production in 2011, providing rugged, high-efficiency switches for high-frequency power systems. In this wide-ranging book, the authors draw on their considerable experience to present both an introduction to SiC materials, devices, and applications and an in-depth reference for scientists and engineers working in this fast-moving field. Fundamentals of Silicon Carbide Technology covers basic properties of SiC materials, processing technology, theory and analysis of practical devices, and an overview of the most important systems applications. Specifically included are: A complete discussion of SiC material properties, bulk crystal growth, epitaxial growth, device fabrication technology, and characterization techniques. Device physics and operating equations for Schottky diodes, pin diodes, JBS/MPS diodes, JFETs, MOSFETs, BJTs, IGBTs, and thyristors. A survey of power electronics applications, including switch-mode power supplies, motor drives, power converters for electric vehicles, and converters for renewable energy sources. Coverage of special applications, including microwave devices, high-temperature electronics, and rugged sensors. Fully illustrated throughout, the text is written by recognized experts with over 45 years of combined experience in SiC research and development. This book is intended for graduate students and researchers in crystal growth, material science, and semiconductor device technology. The book is also useful for design engineers, application engineers, and product managers in areas such as power supplies, converter and inverter design, electric vehicle technology, high-temperature electronics, sensors, and smart grid technology.

Download or read book The Physics of Graphene written by Mikhail I. Katsnelson and published by Cambridge University Press. This book was released on 2020-03-19 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: Leading graphene research theorist Mikhail I. Katsnelson systematically presents the basic concepts of graphene physics in this fully revised second edition. The author illustrates and explains basic concepts such as Berry phase, scaling, Zitterbewegung, Kubo, Landauer and Mori formalisms in quantum kinetics, chirality, plasmons, commensurate-incommensurate transitions and many others. Open issues and unsolved problems introduce the reader to the latest developments in the field. New achievements and topics presented include the basic concepts of Van der Waals heterostructures, many-body physics of graphene, electronic optics of Dirac electrons, hydrodynamics of electron liquid and the mechanical properties of one atom-thick membranes. Building on an undergraduate-level knowledge of quantum and statistical physics and solid-state theory, this is an important graduate textbook for students in nanoscience, nanotechnology and condensed matter. For physicists and material scientists working in related areas, this is an excellent introduction to the fast-growing field of graphene science.

Download or read book The Physics of Semiconductor Devices written by R. K. Sharma and published by Springer. This book was released on 2019-01-31 with total page 1260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book disseminates the current knowledge of semiconductor physics and its applications across the scientific community. It is based on a biennial workshop that provides the participating research groups with a stimulating platform for interaction and collaboration with colleagues from the same scientific community. The book discusses the latest developments in the field of III-nitrides; materials & devices, compound semiconductors, VLSI technology, optoelectronics, sensors, photovoltaics, crystal growth, epitaxy and characterization, graphene and other 2D materials and organic semiconductors.

Download or read book Transmission Electron Microscopy written by C. Barry Carter and published by Springer. This book was released on 2016-08-24 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is a companion volume to Transmission Electron Microscopy: A Textbook for Materials Science by Williams and Carter. The aim is to extend the discussion of certain topics that are either rapidly changing at this time or that would benefit from more detailed discussion than space allowed in the primary text. World-renowned researchers have contributed chapters in their area of expertise, and the editors have carefully prepared these chapters to provide a uniform tone and treatment for this exciting material. The book features an unparalleled collection of color figures showcasing the quality and variety of chemical data that can be obtained from today’s instruments, as well as key pitfalls to avoid. As with the previous TEM text, each chapter contains two sets of questions, one for self assessment and a second more suitable for homework assignments. Throughout the book, the style follows that of Williams & Carter even when the subject matter becomes challenging—the aim is always to make the topic understandable by first-year graduate students and others who are working in the field of Materials Science Topics covered include sources, in-situ experiments, electron diffraction, Digital Micrograph, waves and holography, focal-series reconstruction and direct methods, STEM and tomography, energy-filtered TEM (EFTEM) imaging, and spectrum imaging. The range and depth of material makes this companion volume essential reading for the budding microscopist and a key reference for practicing researchers using these and related techniques.

Download or read book Inorganic Electrochemistry written by Piero Zanello and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 733 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrochemistry can be an elegant and essential support to synthetic inorganic chemistry. However, it is often perceived as a difficult technique. This book aims to introduce inorganic chemists to electrochemical investigations in as straightforward a way as possible. First, the reader is introduced to the theory of electron transfer processes, how they can be studied by various electrochemical techniques, and the practical procedures required. The book then goes on to look extensively, and with numerous illustrations, at the application of the techniques in the multiple fields of inorganic chemistry (including organometallics, coordination compounds, bioinorganics/biomimetics and materials science). Topics covered include: metallocenes; organometallic and coordination complexes; metal complexes of redox active ligands; metal-carbonyl clusters; superconductors; molecular wires; and proteins. Throughout, special attention is paid to the structural effects accompanying the electron transfer processes. This unique book bridges the gap between undergraduate and research-level electrochemistry books, and will be welcomed as an introduction to electrochemical applications within inorganic chemistry.

Download or read book Optoelectronic Devices written by M Razeghi and published by Elsevier. This book was released on 2004 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tremendous progress has been made in the last few years in the growth, doping and processing technologies of the wide bandgap semiconductors. As a result, this class of materials now holds significant promis for semiconductor electronics in a broad range of applications. The principal driver for the current revival of interest in III-V Nitrides is their potential use in high power, high temperature, high frequency and optical devices resistant to radiation damage. This book provides a wide number of optoelectronic applications of III-V nitrides and covers the entire process from growth to devices and applications making it essential reading for those working in the semiconductors or microelectronics. Broad review of optoelectronic applications of III-V nitrides

Download or read book Two Dimensional Transition Metal Dichalcogenides written by Narayanasamy Sabari Arul and published by Springer. This book was released on 2019-07-30 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents advanced synthesis techniques adopted to fabricate two-dimensional (2D) transition metal dichalcogenides (TMDs) materials with its enhanced properties towards their utilization in various applications such as, energy storage devices, photovoltaics, electrocatalysis, electronic devices, photocatalysts, sensing and biomedical applications. It provides detailed coverage on everything from the synthesis and properties to the applications and future prospects of research in 2D TMD nanomaterials.

Download or read book Recent Advances in Technology Research and Education written by Dumitru Luca and published by Springer. This book was released on 2017-09-08 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected contributions to the 16th International Conference on Global Research and Education Inter-Academia 2017 hosted by Alexandru Ioan Cuza University of Iași, Romania from 25 to 28 September 2017. It is the third volume in the series, following the editions from 2015 and 2016. Fundamental and applied research in natural sciences have led to crucial developments in the ongoing 4th global industrial revolution, in the course of which information technology has become deeply embedded in industrial management, research and innovation – and just as deeply in education and everyday life. Materials science and nanotechnology, plasma and solid state physics, photonics, electrical and electronic engineering, robotics and metrology, signal processing, e-learning, intelligent and soft computing have long since been central research priorities for the Inter-Academia Community (I-AC) – a body comprising 14 universities and research institutes from Japan and Central/East-European countries that agreed, in 2002, to coordinate their research and education programs so as to better address today’s challenges. The book is intended for use in academic, government, and industrial R&D departments as a reference tool in research and technology education. The 42 peer-reviewed papers were written by more than 119 leading scientists from 14 countries, most of them affiliated to the I-AC.

Download or read book The Handbook of Graphene Electrochemistry written by Robert D. Crapnell and published by Springer Nature. This book was released on with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Science of Clays written by Swapna Mukherjee and published by Springer Science & Business Media. This book was released on 2013-10-09 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an attempt to provide a comprehensive and coherent description of three widely separated aspects of clays: the science of clays; the industrial uses of clays; and the role of clays in the environment. Most of the existing literature lacks such an integrated study and this work endeavours to fill that gap. An exhaustive account of the science of clays is presented in Part I of the book, which includes the classification, origin and evolution, composition and internal structure, chemical and physical properties of clays; soil mechanics; and analytical techniques for determining clay constituents. Part II provides a comprehensive description of the applications of clays and their derivatives in various industries, while Part III describes the role of clays in the environment; the pollution caused by clay minerals; and the application of clays in order to prevent environmental hazards. A principal feature of the book is its explanation of how the structure and composition of particular clay types facilitate their specific industrial or environmental applications, thus describing the interrelationship between three widely varying aspects of clay. A number of thought-provoking questions are raised at the end of the work in order to leave readers with a better insight in this regard.

Download or read book Carbyne and Carbynoid Structures written by R.B. Heimann and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a book on one of the most fascinating and controversial areas in contemporary science of carbon, chemistry, and materials science. It concisely summarizes the state of the art in topical and critical reviews written by professionals in this and related fields.

Download or read book Materials Science of Carbides Nitrides and Borides written by Yury G. Gogotsi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: A survey of current research on a wide range of carbide, nitride and boride materials, covering the general issues relevant to the development and characterisation of a variety of advanced materials. Topics include structure and electronic properties, modeling, processing, high-temperature chemistry, oxidation and corrosion, mechanical behaviour, manufacturing and applications. The volume complements more specialised books on specific materials as well as more general texts on ceramics or hard materials, presenting a survey of materials research as a key to technological development. After decades of research, the materials are being used in electronics, wear resistant, refractory and other applications, but numerous new applications are possible. Roughly equal numbers of papers cover theoretical and experimental research in the general field of materials science of refractory materials. Audience: Researchers and graduate students in materials science and engineering.

Download or read book Micro and Nanomanufacturing written by Mark J. Jackson and published by Springer Science & Business Media. This book was released on 2007-06-19 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: This, the corrected second printing of Jackson’s authoritative volume on the subject, provides a comprehensive treatment of established micro and nanofabrication techniques. It addresses the needs of practicing manufacturing engineers by applying established and research laboratory manufacturing techniques to a wide variety of materials. Nanofabrication and nanotechnology present a great challenge to engineers and researchers as they manipulate atoms and molecules to produce single artifacts and submicron components and systems. The book provides up-to-date information on a number of subjects of interest to engineers who are seeking more knowledge of how nano and micro devices are designed and fabricated. They will learn about manufacturing and fabrication techniques at the micro and nanoscales; using bulk and surface micromachining techniques, and LiGA, and deep x-ray lithography to manufacture semiconductors. Also covered are subjects including producing master molds with micromachining, the deposition of thin films, pulsed water drop machining, and nanomachining.

Download or read book Thin Film Analysis by X Ray Scattering written by Mario Birkholz and published by John Wiley & Sons. This book was released on 2006-05-12 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions by Paul F. Fewster and Christoph Genzel While X-ray diffraction investigation of powders and polycrystalline matter was at the forefront of materials science in the 1960s and 70s, high-tech applications at the beginning of the 21st century are driven by the materials science of thin films. Very much an interdisciplinary field, chemists, biochemists, materials scientists, physicists and engineers all have a common interest in thin films and their manifold uses and applications. Grain size, porosity, density, preferred orientation and other properties are important to know: whether thin films fulfill their intended function depends crucially on their structure and morphology once a chemical composition has been chosen. Although their backgrounds differ greatly, all the involved specialists a profound understanding of how structural properties may be determined in order to perform their respective tasks in search of new and modern materials, coatings and functions. The author undertakes this in-depth introduction to the field of thin film X-ray characterization in a clear and precise manner.

Download or read book Nanostructure Science and Technology written by Richard W. Siegel and published by Springer Science & Business Media. This book was released on 1999-09-30 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Timely information on scientific and engineering developments occurring in laboratories around the world provides critical input to maintaining the economic and technological strength of the United States. Moreover, sharing this information quickly with other countries can greatly enhance the productivity of scientists and engineers. These are some of the reasons why the National Science Foundation (NSF) has been involved in funding science and technology assessments comparing the United States and foreign countries since the early 1980s. A substantial number of these studies have been conducted by the World Technology Evaluation Center (WTEC) managed by Loyola College through a cooperative agreement with NSF. The National Science and Technology Council (NSTC), Committee on Technology's Interagency Working Group on NanoScience, Engineering and Technology (CT/IWGN) worked with WTEC to develop the scope of this Nanostucture Science and Technology report in an effort to develop a baseline of understanding for how to strategically make Federal nanoscale R&D investments in the coming years. The purpose of the NSTC/WTEC activity is to assess R&D efforts in other countries in specific areas of technology, to compare these efforts and their results to U. S. research in the same areas, and to identify opportunities for international collaboration in precompetitive research. Many U. S. organizations support substantial data gathering and analysis efforts focusing on nations such as Japan. But often the results of these studies are not widely available. At the same time, government and privately sponsored studies that are in the public domain tend to be "input" studies.

Download or read book Nanoscale Materials in Water Purification written by Sabu Thomas and published by Elsevier. This book was released on 2018-11-14 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt: Novel nanoscale materials are now an essential part of meeting the current and future needs for clean water, and are at the heart of the development of novel technologies to desalinate water. The unique properties of nanomaterials and their convergence with current treatment technologies present great opportunities to revolutionize water and wastewater treatment. Nanoscale Materials for Water Purification brings together sustainable solutions using novel nanomaterials to alleviate the physical effects of water scarcity. This book covers a wide range of nanomaterials, including noble metal nanoparticles, magnetic nanoparticles, dendrimers, bioactive nanoparticles, polysaccharidebased nanoparticles, nanocatalysts, and redox nanoparticles for water purification. Significant properties and characterization methods of nanomaterials such as surface morphology, mechanical properties, and adsorption capacities are also investigated - Explains how the unique properties of a range of nanomaterials makes them important water purification agents - Shows how the use of nanotechnology can help create cheaper, more reliable, less energy-intensive, more environmentally friendly water purification techniques - Includes case studies to show how nanotechnology has successfully been integrated into water purification system design