Download or read book Characterization of Solid Surfaces written by Philip F. Kane and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 675 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until comparatively recently, trace analysis techniques were in general directed toward the determination of impurities in bulk materials. Methods were developed for very high relative sensitivity, and the values determined were average values. Sampling procedures were devised which eliminated the so-called sampling error. However, in the last decade or so, a number of developments have shown that, for many purposes, the distribution of defects within a material can confer important new properties on the material. Perhaps the most striking example of this is given by semiconductors; a whole new industry has emerged in barely twenty years based entirely on the controlled distribu tion of defects within what a few years before would have been regarded as a pure, homogeneous crystal. Other examples exist in biochemistry, metallurgy, polyiners and, of course, catalysis. In addition to this of the importance of distribution, there has also been a recognition growing awareness that physical defects are as important as chemical defects. (We are, of course, using the word defect to imply some dis continuity in the material, and not in any derogatory sense. ) This broadening of the field of interest led the Materials Advisory Board( I} to recommend a new definition for the discipline, "Materials Character ization," to encompass this wider concept of the determination of the structure and composition of materials. In characterizing a material, perhaps the most important special area of interest is the surface.

Download or read book Characterization of Solid Surfaces written by Philip F. Kane and published by . This book was released on 1974 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Characterization of Solid Materials and Heterogeneous Catalysts written by Michel Che and published by John Wiley & Sons. This book was released on 2012-04-16 with total page 1313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume book provides an overview of physical techniques used to characterize the structure of solid materials, on the one hand, and to investigate the reactivity of their surface, on the other. Therefore this book is a must-have for anyone working in fields related to surface reactivity. Among the latter, and because of its most important industrial impact, catalysis has been used as the directing thread of the book. After the preface and a general introduction to physical techniques by M. Che and J.C. Vedrine, two overviews on physical techniques are presented by G. Ertl and Sir J.M. Thomas for investigating model catalysts and porous catalysts, respectively. The book is organized into four parts: Molecular/Local Spectroscopies, Macroscopic Techniques, Characterization of the Fluid Phase (Gas and/ or Liquid), and Advanced Characterization. Each chapter focuses upon the following important themes: overview of the technique, most important parameters to interpret the experimental data, practical details, applications of the technique, particularly during chemical processes, with its advantages and disadvantages, conclusions.

Download or read book Characterization of Porous Solids and Powders Surface Area Pore Size and Density written by S. Lowell and published by Springer Science & Business Media. This book was released on 2012-09-14 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growth of interest in newly developed porous materials has prompted the writing of this book for those who have the need to make meaningful measurements without the benefit of years of experience. One might consider this new book as the 4th edition of "Powder Surface Area and Porosity" (Lowell & Shields), but for this new edition we set out to incorporate recent developments in the understanding of fluids in many types of porous materials, not just powders. Based on this, we felt that it would be prudent to change the title to "Characterization of Porous Solids and Powders: Surface Area, Porosity and Density". This book gives a unique overview of principles associated with the characterization of solids with regard to their surface area, pore size, pore volume and density. It covers methods based on gas adsorption (both physi and chemisorption), mercury porosimetry and pycnometry. Not only are the theoretical and experimental basics of these techniques presented in detail but also, in light of the tremendous progress made in recent years in materials science and nanotechnology, the most recent developments are described. In particular, the application of classical theories and methods for pore size analysis are contrasted with the most advanced microscopic theories based on statistical mechanics (e.g. Density Functional Theory and Molecular Simulation). The characterization of heterogeneous catalysts is more prominent than in earlier editions; the sections on mercury porosimetry and particularly chemisorption have been updated and greatly expanded.

Download or read book Solid Surfaces Interfaces and Thin Films written by Hans Lüth and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book emphasises both experimental and theoretical aspects of surface, interface and thin film physics. Compa- red to the earlier editions, which bore the title "Surfaces and Interfaces of Solid Materials", the book now places more emphasis on thin films, including also their superconducting and ferromagnetic properties. The present 4th edition thus presents techniques of preparing well-defined solid surfaces and interfaces, fundamental aspects of adsorption and layer growth, as well as basic models for the descripti- on of structural, vibronic and electronic properties of sur- faces, interfaces and thin films. Because of their importan- ce for modern information technology, significant attention is paid to the electronic properties of semiconductor inter- faces and heterostructures. Collective phenomena , such as superconductivity and ferromagnetism, also feature promi- nently. Experimental sections covering essential measurement and preparation techniques are presented in separate panels.

Download or read book Surface Characterization Methods written by Andrew J. Milling and published by CRC Press. This book was released on 1999-08-03 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Outlines the scientific basis and experimental methods for a broad sample of surface analysis techniques, drawing heavily from established principles of physical and analytical chemistry. Sketches a simple low-cost method of tracking particles in three dimensions."

Download or read book Elementary Physicochemical Processes on Solid Surfaces written by V.P. Zhdanov and published by Springer Science & Business Media. This book was released on 1991-11-30 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: vi industrial process or a class of catalysts forms the basis of other books, with information on: fundamental science of the topic, the use of the pro cess or catalysts, and engineering aspects. Single topics in catalysis are also treated in the series, with books giving the theory of the underlying science, and relating it to catalytic practice. We believe that this approach is giving a collection of volumes that is of value to both academic and industrial workers. The series editors welcome comments on the series and suggestions of topics for future volumes. Martyn Twigg Michael Spencer Billingham and Cardiff Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . 1 . . . . . . . . Chapter 1. Vibrational Relaxation of Adsorbed Particles . . . .. . 5 1.1. General Approach to Describing Vibrational Relaxation ..... 5 1.2. Phonon Mechanism of Relaxation .................... 8 1.2.1. Relationship between the Simple Perturbation Theory and the Adiabatic Approximation .. . . . . . . . . . .. . . 9 . 1.2.2. One-Mode Approximation .................. . .. 11 1.2.3. Relaxation Caused by Correlation Potential Proportional to Displacement of Adsorbed Particle from Equilibrium ........................... 12 1.2.4. Relaxation Caused by Correlation Potential Proportional to Displacement of Surface Atom from Equilibrium ........................... 14 1.2.5. Results and Discussion ....................... 15 1.3. Vibrational Relaxation via Interaction with Conduction Electrons . . . . . . . . . . . . . . . . . . . . . . . . . .. . . 18 . . . . . . . . . 1.3.1. Dipole Approximation ......... '.' . . . . . . . . .. . . 18 .

Download or read book Solid State Characterization of Pharmaceuticals written by Richard A. Storey and published by John Wiley & Sons. This book was released on 2011-03-31 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of solid state characterization is central to the pharmaceutical industry, as drug products are, in an overwhelming number of cases, produced as solid materials. Selection of the optimum solid form is a critical aspect of the development of pharmaceutical compounds, due to their ability to exist in more than one form or crystal structure (polymorphism). These polymorphs exhibit different physical properties which can affect their biopharmaceutical properties. This book provides an up-to-date review of the current techniques used to characterize pharmaceutical solids. Ensuring balanced, practical coverage with industrial relevance, it covers a range of key applications in the field. The following topics are included: Physical properties and processes Thermodynamics Intellectual guidance X-ray diffraction Spectroscopy Microscopy Particle sizing Mechanical properties Vapour sorption Thermal analysis & Calorimetry Polymorph prediction Form selection

Download or read book Surface Analysis Methods in Materials Science written by D.J. O'Connor and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide to the use of surface analysis techniques, now in its second edition, has expanded to include more techniques, current applications and updated references. It outlines the application of surface analysis techniques to a broad range of studies in materials science and engineering. The book consists of three parts: an extensive introduction to the concepts of surface structure and composition, a techniques section describing 19 techniques and a section on applications. This book is aimed at industrial scientists and engineers in research and development. The level and content of this book make it ideal as a course text for senior undergraduate and postgraduate students in materials science, materials engineering, physics, chemistry and metallurgy.

Download or read book Surface Wetting written by Kock-Yee Law and published by Springer. This book was released on 2015-11-18 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes wetting fundamentals and reviews the standard protocol for contact angle measurements. The authors include a brief overview of applications of contact angle measurements in surface science and engineering. They also discuss recent advances and research trends in wetting fundamentals and include measurement techniques and data interpretation of contract angles.

Download or read book Characterization of Porous Solids written by H. Kral and published by Elsevier. This book was released on 1988-04-01 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of porosity has long been recognized by scientists and engineers. Porous solids are widely encountered in industry and everyday life and their behaviour, e.g. chemical reactivity, adsorptive capacity, and catalytic activity is dependent on their pore structure. A considerable amount of work on porous solids has been undertaken both in academic and in industrial laboratories. However, all this activity is in urgent need of a critical appraisal. To undertake this task, a number of leading experts in the field of adsorption, porosimetry, X-ray and neutron scattering, optical and electron microscopy, calorimetry and fluid permeation, were brought together at the 1987 IUPAC (COPS I) Symposium. This proceedings volume provides an up-to-date overall review of the theoretical foundations for modelling and characterizing porous systems. It deals with most of the techniques in current use as applied to both model systems and porous solids of industrial importance. The reader will find the description and discussion of a number of novel techniques as well as a critical appraisal and comparison of the more established methods. All those concerned with the characterization of porous solids in academic and industrial laboratories will find much to interest them in this volume. It should be on the bookshelf of applied research centres involved in adsorption, catalysis, purification of gases and liquids, pigments, fillers, building materials, etc.

Download or read book Characterization of Thin Films and Solid Surfaces Using Proton induced X ray Emission written by Bruce D. Sartwell and published by . This book was released on 1980 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Polymer Surfaces and Interfaces written by Manfred Stamm and published by Springer Science & Business Media. This book was released on 2008-01-26 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: In what is an extremely practical and applicable new work, experts provide concise explanations, with examples and illustrations, of the key techniques in this important field. In each case, after basic principles have been reviewed, applications of the experimental techniques are discussed and illustrated with specific examples. Scientists and engineers in research and development will benefit from an application-oriented book that helps them to find solutions to both fundamental and applied problems. They will know that the surfaces and interfaces of polymers play an important role in most of the application areas of polymers, from moulds, foils, and composites, to biomaterials and applications in micro- and nanotechnology.

Download or read book Tribology Issues and Opportunities in MEMS written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro Electro Mechanical Systems (MEMS) is already about a billion dollars a year industry and is growing rapidly. So far major emphasis has been placed on the fabrication processes for various devices. There are serious issues related to tribology, mechanics, surfacechemistry and materials science in the operationand manufacturingof many MEMS devices and these issues are preventing an even faster commercialization. Very little is understood about tribology and mechanical properties on micro- to nanoscales of the materials used in the construction of MEMS devices. The MEMS community needs to be exposed to the state-of-the-artoftribology and vice versa. Fundamental understanding of friction/stiction, wear and the role of surface contamination and environmental debris in micro devices is required. There are significantadhesion, friction and wear issues in manufacturing and actual use, facing the MEMS industry. Very little is understood about the tribology of bulk silicon and polysilicon films used in the construction ofthese microdevices. These issues are based on surface phenomenaand cannotbe scaled down linearly and these become increasingly important with the small size of the devices. Continuum theory breaks down in the analyses, e. g. in fluid flow of micro-scale devices. Mechanical properties ofpolysilicon and other films are not well characterized. Roughness optimization can help in tribological improvements. Monolayers of lubricants and other materials need to be developed for ultra-low friction and near zero wear. Hard coatings and ion implantation techniques hold promise.

Download or read book Microstructure and Thermal Analysis of Solid Surfaces written by Raouf Shaker Mikhail and published by John Wiley & Sons. This book was released on 1983 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Surfaces and Interfaces of Solids written by Hans Lüth and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Surfaces and Interfaces of Solids" emphasizes both experimental and theoretical aspects of surface and interface physics. Beside the techniques of preparing well-defined solid surfaces and interfaces basic models for the description of structural, vibronic and electronic properties ofinterfaces are described, as well as fundamental aspects of adsorption and layer growth. Because of its importance for modern microelectronics special emphasis is placed on the electronic properties of semiconductorinterfaces and heterostructures. Experimental topics covering the basics of ultrahigh-vacuum technology, electron optics, surface spectroscopies and electrical interface characterization techniques are presented in the form of separate panels.

Download or read book Beam Effects Surface Topography and Depth Profiling in Surface Analysis written by Alvin W. Czanderna and published by Springer Science & Business Media. This book was released on 1998-10-31 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many books are available that detail the basic principles of the different methods of surface characterization. On the other hand, the scientific literature provides a resource of how individual pieces of research are conducted by particular labo- tories. Between these two extremes the literature is thin but it is here that the present volume comfortably sits. Both the newcomer and the more mature scientist will find in these chapters a wealth of detail as well as advice and general guidance of the principal phenomena relevant to the study of real samples. In the analysis of samples, practical analysts have fairly simple models of how everything works. Superimposed on this ideal world is an understanding of how the parameters of the measurement method, the instrumentation, and the char- teristics of the sample distort this ideal world into something less precise, less controlled, and less understood. The guidance given in these chapters allows the scientist to understand how to obtain the most precise and understood measu- ments that are currently possible and, where there are inevitable problems, to have clear guidance as the extent of the problem and its likely behavior.