Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the though that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemi nation. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 37 (thesis year 1992) a total of 12,549 thesis titles from 25 Canadian and 153 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 37 reports theses submitted in 1992, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.
Download or read book Handbook of Photovoltaic Silicon written by Deren Yang and published by Springer. This book was released on 2019-11-28 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The utilization of sun light is one of the hottest topics in sustainable energy research. To efficiently convert sun power into a reliable energy – electricity – for consumption and storage, silicon and its derivatives have been widely studied and applied in solar cell systems. This handbook covers the photovoltaics of silicon materials and devices, providing a comprehensive summary of the state of the art of photovoltaic silicon sciences and technologies. This work is divided into various areas including but not limited to fundamental principles, design methodologies, wafering techniques/fabrications, characterizations, applications, current research trends and challenges. It offers the most updated and self-explanatory reference to all levels of students and acts as a quick reference to the experts from the fields of chemistry, material science, physics, chemical engineering, electrical engineering, solar energy, etc..
Download or read book Masters Theses in the Pure and Applied Sciences written by Sade H Shafer and published by Springer Science & Business Media. This book was released on 1995 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cited in Sheehy, Chen, and Hurt . Volume 38 (thesis year 1993) reports a total of 13,787 thesis titles from 22 Canadian and 164 US universities. As in previous volumes, thesis titles are arranged by discipline and by university within each discipline. Any accredited university or college with a grad
Download or read book Epioptics 9 Proceedings Of The 39th Course Of The International School Of Solid State Physics written by Antonio Cricenti and published by World Scientific. This book was released on 2008-01-15 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: This special volume contains the proceedings of the 9th Epioptics Workshop, held at the Ettore Majorana Foundation and Centre for Scientific Culture, Erice, Sicily, from July 20 to 26, 2006. The workshop was the 9th in the Epioptics series and the 39th of the International School of Solid State Physics.The workshop was aimed at assessing the capabilities of state-of-the-art optical techniques in elucidating the fundamental electronic and structural properties of semiconductor and metal surfaces, interfaces, thin layers, and layer structures, and at assessing the usefulness of these techniques for optimization of high-quality multilayer samples through feedback control during materials growth and processing. Particular emphasis is dedicated to the theory of non-linear optics and to dynamical processes through the use of pump-probe techniques together with the search for new optical sources. Some new applications of scanning probe microscopy to material science and biological samples, dried and in vivo, with the use of different laser sources are also presented.
Download or read book Technology and Applications of Amorphous Silicon written by Robert A. Street and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives the first systematic and complete survey of technology and application of amorphous silicon, a material with a huge potential in electronic applications. The book features contributions by world-wide leading researchers in this field.
Download or read book Indian Journal of Pure Applied Physics written by and published by . This book was released on 1993 with total page 1114 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Photoconductivity and Photoconductive Materials 2 Volume Set written by Safa O. Kasap and published by John Wiley & Sons. This book was released on 2022-06-27 with total page 919 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore an authoritative resource with coverage of foundational concepts of photoconductivity and photoconductive materials In Photoconductivity and Photoconductive Materials, Professor Kasap delivers a definitive guide to the basic principles of photoconductivity and a selection of present topical photoconductive materials. Divided into two parts, the set begins with basic concepts and definitions and coverage of characterization using steady state, transient and modulated photoconductivity techniques, including the novel charge extraction by linearly increasing voltage (CELIV) method The physics of terahertz photoconductivity and fundamentals of organic semiconductors lsois are also covered. Part Two of the set starts with a comprehensive review of a wide range of photoconductive materials and then focuses on some of the most important photoconductors, including hydrogenated amorphous silicon, cadmium mercury telluride, various x-ray photoconductors, diamond films, metal halide perovskites, nanowires and quantum dots. Photoconductive antenna application is also included. Filled with contributions from leading authors in the field, this book also offers: A thorough introduction to the characterization of semiconductors from photoconductivity techniques, including uniform illumination and photocarrier grating techniques Comprehensive explorations of organic photoconductors, including photogeneration, transport, and applications in printing Practical discussions of time-of-flight transient photoconductivity, including experimental techniques and interpretation In-depth examinations of transient photoconductivity of organic semiconducting films and novel transient photoconductivity techniques Perfect for research physicists, materials scientists, and electrical engineers, Photoconductivity and Photoconductive Materials is also an indispensable resource for postgraduate and senior undergraduate students working in the area of optoelectronic materials, as well as researchers working in industry.
Download or read book Masters Theses in the Pure and Applied Sciences written by W. H. Shafer and published by Springer Science & Business Media. This book was released on 1994 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 37 (thesis year 1992) reports a total of 12,549 thesis titles from 25 Canadian and 153 US universities (theses submitted in previous years but only now reported are indicated by the thesis year shown in parenthesis). The organization, like that of past years, consists of thesis titles arrange
Download or read book Epioptics 9 written by Antonio Cricenti and published by World Scientific. This book was released on 2008 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: This special volume contains the proceedings of the 9th Epioptics Workshop, held at the Ettore Majorana Foundation and Centre for Scientific Culture, Erice, Sicily, from July 20 to 26, 2006. The workshop was the 9th in the Epioptics series and the 39th of the International School of Solid State Physics. The workshop was aimed at assessing the capabilities of state-of-the-art optical techniques in elucidating the fundamental electronic and structural properties of semiconductor and metal surfaces, interfaces, thin layers, and layer structures, and at assessing the usefulness of these techniques for optimization of high-quality multilayer samples through feedback control during materials growth and processing. Particular emphasis is dedicated to the theory of non-linear optics and to dynamical processes through the use of pump-probe techniques together with the search for new optical sources. Some new applications of scanning probe microscopy to material science and biological samples, dried and in vivo, with the use of different laser sources are also presented. Sample Chapter(s). Longitudinal Gauge Theory of Surface Second Harmonic Generation (966 KB). Contents: Longitudinal Gauge Theory of Surface Second Harmonic Generation (B S Mendoza); Excited State Properties Calculations: From 0 to 3 Dimensional Systems (M Marsili et al.); High Spatial Resolution Raman Scattering for Nano-structures (E Speiser et al.); Vibrational Properties and the Miniband Effect in InGaAs/InP Superlattices (A D Rodrigues et al.); Electronic and Optical Properties of ZnO Between 3 and 32 eV (M Rakel et al.); Order and Clusters in Model Membranes: Detection and Characterization by Infrared Scanning Near-Field Microscopy (J Generosi et al.); Chemical and Magnetic Properties of NiO Thin Films Epitaxially Grown on Fe(001) (A Brambilla); Probing the Dispersion of Surface Phonons by Light Scattering (G Benedek & J P Toennies); and other papers. Readership: Researchers as well as graduate and postgraduate students in applied physics, specifically semiconductors and related areas, electron microscopy and condensed matter physics.
Download or read book Thin Film Solar Cells written by Jef Poortmans and published by John Wiley & Sons. This book was released on 2006-10-02 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin-film solar cells are either emerging or about to emerge from the research laboratory to become commercially available devices finding practical various applications. Currently no textbook outlining the basic theoretical background, methods of fabrication and applications currently exist. Thus, this book aims to present for the first time an in-depth overview of this topic covering a broad range of thin-film solar cell technologies including both organic and inorganic materials, presented in a systematic fashion, by the scientific leaders in the respective domains. It covers a broad range of related topics, from physical principles to design, fabrication, characterization, and applications of novel photovoltaic devices.
Download or read book Advances in Photodetectors written by Kuan Chee and published by Intechopen. This book was released on 2019-09-18 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a wide-ranging overview of the current state-of-the-art and new trends in photodetector design and research. Written by a team of internationally renowned experts, with contributions from universities, research institutes and industries, this work is suitable for students and professionals interested in studying and dealing with photodetector design and technology, as well as the wide gamut of related applications. Its coverage includes: physics and fundamentals of photodetectors; physical models of photodetector operation; new materials, design, processing and function of photodetectors in related applications; testing, monitoring and calibration; and research progress in photodetector-related areas. Theoretical aspects, design and simulation principles, and important experimental results are thoroughly addressed, embodying a comprehensive account of current activity in this important field of research and industry.
Download or read book Amorphous Silicon Technology written by and published by . This book was released on 1995 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Amorphous Silicon Semiconductors pure and Hydrogenated written by and published by . This book was released on 1987 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Diamond Based Composites written by Mark A. Prelas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diamond-based composites, with their advantages of hardness, high Young's modulus and the like, have demonstrated new and unusual features, such as stability to high temperatures and pressure shocks and a large internal surface that can be controlled to offer customised electrical, magnetic and optical properties, leading to efficient filters, absorbents, sensors and other tools for environmental control and monitoring. The current book covers the synthesis of materials, their characterization and properties, trends in high pressure and high temperature technologies, low pressure technologies, basic principles of DBC material science, and future developments in electronics, optics, industrial tools and components, biotechnology, and medicine. Wide band-gap materials are considered, ranging from molecular clusters, nanophase materials, growth, processing and synthesis. The processing of composite based materials can be classified into six basic methods: in situ growth, high pressure/high temperature catalytic conversion; mix and sinter (c-BN plus metal-ceramic polymer mix); direct sintering; direct polymorphic conversion; shock detonation; and SHS sintering.
Download or read book Physics Briefs written by and published by . This book was released on 1994 with total page 1170 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book JJAP written by and published by . This book was released on 1999 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Japanese Journal of Applied Physics written by and published by . This book was released on 1999 with total page 1110 pages. Available in PDF, EPUB and Kindle. Book excerpt:
