Download or read book Characterization of Dislocation Structures and Deformation Mechanisms in As grown and Deformed Directionally Solidified NiAl u2013 Mo Composites written by and published by . This book was released on 2015 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this paper, directionally solidified (DS) NiAl–Mo eutectic composites were strained to plastic strain values ranging from 0% to 12% to investigate the origin of the previously observed stochastic versus deterministic mechanical behaviors of Mo-alloy micropillars in terms of the development of dislocation structures at different pre-strain levels. The DS composites consist of long, [1 0 0] single-crystal Mo-alloy fibers with approximately square cross-sections embedded in a [1 0 0] single-crystal NiAl matrix. Scanning transmission electron microscopy (STEM) and computational stress state analysis were conducted for the current study. STEM of the as-grown samples (without pre-straining) reveal no dislocations in the investigated Mo-alloy fibers. In the NiAl matrix, on the other hand, a(1 0 0)-type dislocations exist in two orthogonal orientations: along the [1 0 0] Mo fiber axis, and wrapped around the fiber axis. They presumably form to accommodate the different thermal contractions of the two phases during cool down after eutectic solidification. At intermediate pre-strain levels (4–8%), a/2(1 1 1)-type dislocations are present in the Mo-alloy fibers and the pre-existing dislocations in the NiAl matrix seem to be swept toward the interphase boundary. Some of the dislocations in the Mo-alloy fibers appear to be transformed from a(1 0 0)-type dislocations present in the NiAl matrix. Subsequently, the transformed dislocations in the fibers propagate through the NiAl matrix as a(1 1 1) dislocations and aid in initiating additional slip bands in adjacent fibers. Thereafter, co-deformation presumably occurs by (1 1 1) slip in both phases. With a further increase in the pre-strain level (>10%), multiple a/2(1 1 1)-type dislocations are observed in many locations in the Mo-alloy fibers. Interactions between these systems upon subsequent deformation could lead to stable junctions and persistent dislocation sources. Finally, the transition from stochastic to deterministic, bulk-like behavior in sub-micron Mo-alloy pillars may therefore be related to an increasing number of multiple a(1 1 1) dislocation systems within the Mo fibers with increasing pre-strain, considering that the bulk-like behavior is governed by the forest hardening of these junctions.
Download or read book Characterization of Dislocation Structures and Deformation Mechanisms in As grown and Deformed Directionally Solidified NiAl Mo Composites written by and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dislocations and Deformation Mechanisms in Thin Films and Small Structures Volume 673 written by Oliver Kraft and published by . This book was released on 2001-09-20 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: The mechanical properties of small volumes of materials (such as thin films and patterned structures) can be very different from larger volumes, especially in the area of dislocation behavior. This text contains a selection of 31 papers from the April 2001 symposium devoted to new methods of dislocation modeling. Topics include mechanisms of plastic deformation in heteroepitaxial, multilayered, and polycrystalline thin films; as well as in 3D mesostructures such as epitaxial islands, semiconducting devices, and microcrystallites. The organizers of the symposium had the particular aim of stimulating exchange between experimental work, theoretical modeling, and numerical simulations. Annotation copyrighted by Book News Inc., Portland, OR.
Download or read book Dislocation Structures and Deformation Mechanisms in NiAl written by Srinivasan Rajagopalan and published by . This book was released on 1999 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Dislocations written by Derek Hull and published by . This book was released on 1965 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dislocations and Deformation Mechanisms in Thin Films and Small Structures Volume 673 written by Oliver Kraft and published by Cambridge University Press. This book was released on 2014-06-05 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: The mechanical properties of small volumes of materials such as thin films and patterned structures can be very different from the mechanical properties of those same materials in bulk. Many explanations of the mechanical behaviors of such small volumes have depended on simplified models of dislocation behavior. However, recent developments in dislocation modeling have made it possible to understand dislocation behavior in much more detail than before. A wide range of topics is presented in these proceedings, including mechanisms of plastic deformation in heteroepitaxial, multilayered and polycrystalline thin films, as well as three-dimensional mesostructures such as epitaxial islands, semiconducting devices and microcrystallites. Experimental, theoretical and numerical simulations are addressed. Topics include: dislocation and deformation mechanisms in thin metal films and multilayers; discrete dislocations - observations and simulations; dislocations and deformation mechanisms in thin films and small structures; dislocations in small structures; dislocations and deformation in epitaxial layers; dislocation fundamentals -observations, calculations and simulations.
Download or read book High Temperature Aluminides and Intermetallics written by S.H. Whang and published by Elsevier. This book was released on 2013-10-22 with total page 759 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of proceedings is concerned with an increasingly important area, that of intermetallics and high temperature aluminides, which has recently been attracting a great deal of attention. Nearly 150 papers presented at the meeting held in San Diego in September 1991 are reproduced here. They cover a wide range of related topics such as the bonding characteristic and alloying behaviour of TiA1 intermetallic compounds and the cleavage fracture of ordered intermetallic alloys. All the papers have been reviewed according to the standards set by Materials Science and Engineering. This book will be of interest to metallurgists and materials scientists working with composites who are interested in the latest developments in this fast–moving field.
Download or read book Metals Abstracts written by and published by . This book was released on 1992 with total page 1796 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Entropy Alloys written by Michael C. Gao and published by Springer. This book was released on 2016-04-27 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic and comprehensive description of high-entropy alloys (HEAs). The authors summarize key properties of HEAs from the perspective of both fundamental understanding and applications, which are supported by in-depth analyses. The book also contains computational modeling in tackling HEAs, which help elucidate the formation mechanisms and properties of HEAs from various length and time scales.
Download or read book Mechanical Behavior of Materials written by Marc A. Meyers and published by . This book was released on 2008 with total page 856 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes numerous examples and problems for student practice, this textbook is ideal for courses on the mechanical behaviour of materials taught in departments of mechanical engineering and materials science.
Download or read book Physical Foundations of Materials Science written by Günter Gottstein and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this vivid and comprehensible introduction to materials science, the author expands the modern concepts of metal physics to formulate basic theory applicable to other engineering materials, such as ceramics and polymers. Written for engineering students and working engineers with little previous knowledge of solid-state physics, this textbook enables the reader to study more specialized and fundamental literature of materials science. Dozens of illustrative photographs, many of them transmission electron microscopy images, plus line drawings, aid developing a firm appreciation of this complex topic. Hard-to-grasp terms such as "textures" are lucidly explained - not only the phenomenon itself, but also its consequences for the material properties. This excellent book makes materials science more transparent.
Download or read book Nanostructured Metals and Alloys written by S H Whang and published by Elsevier. This book was released on 2011-03-22 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tensile strength, fatigue strength and ductility are important properties of nanostructured metallic materials, which make them suitable for use in applications where strength or strength-to-weight ratios are important. Nanostructured metals and alloys reviews the latest technologies used for production of these materials, as well as recent advances in research into their structure and mechanical properties. One of the most important issues facing nanostructured metals and alloys is how to produce them. Part one describes the different methods used to process bulk nanostructured metals and alloys, including chapters on severe plastic deformation, mechanical alloying and electrodeposition among others. Part two concentrates on the microstructure and properties of nanostructured metals, with chapters studying deformation structures such as twins, microstructure of ferrous alloys by equal channel angular processing, and characteristic structures of nanostructured metals prepared by plastic deformation. In part three, the mechanical properties of nanostructured metals and alloys are discussed, with chapters on such topics as strengthening mechanisms, nanostructured metals based on molecular dynamics computer simulations, and surface deformation. Part four focuses on existing and developing applications of nanostructured metals and alloys, covering topics such as nanostructured steel for automotives, steel sheet and nanostructured coatings by spraying. With its distinguished editor and international team of contributors, Nanostructured metals and alloys is a standard reference for manufacturers of metal components, as well as those with an academic research interest in metals and materials with enhanced properties.
Download or read book Transmission Electron Microscopy written by C. Barry Carter and published by Springer. This book was released on 2016-08-24 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is a companion volume to Transmission Electron Microscopy: A Textbook for Materials Science by Williams and Carter. The aim is to extend the discussion of certain topics that are either rapidly changing at this time or that would benefit from more detailed discussion than space allowed in the primary text. World-renowned researchers have contributed chapters in their area of expertise, and the editors have carefully prepared these chapters to provide a uniform tone and treatment for this exciting material. The book features an unparalleled collection of color figures showcasing the quality and variety of chemical data that can be obtained from today’s instruments, as well as key pitfalls to avoid. As with the previous TEM text, each chapter contains two sets of questions, one for self assessment and a second more suitable for homework assignments. Throughout the book, the style follows that of Williams & Carter even when the subject matter becomes challenging—the aim is always to make the topic understandable by first-year graduate students and others who are working in the field of Materials Science Topics covered include sources, in-situ experiments, electron diffraction, Digital Micrograph, waves and holography, focal-series reconstruction and direct methods, STEM and tomography, energy-filtered TEM (EFTEM) imaging, and spectrum imaging. The range and depth of material makes this companion volume essential reading for the budding microscopist and a key reference for practicing researchers using these and related techniques.
Download or read book Manufacturing and Application of Stainless Steels written by Andrea Di Schino and published by MDPI. This book was released on 2020-04-15 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stainless steels represent a quite interesting material family, both from a scientific and commercial point of view, following to their excellent combination in terms of strength and ductility together with corrosion resistance. Thanks to such properties, stainless steels have been indispensable for the technological progress during the last century and their annual consumption increased faster than other materials. They find application in all these fields requiring good corrosion resistance together with ability to be worked into complex geometries. Despite to their diffusion as a consolidated materials, many research fields are active regarding the possibility to increase stainless steels mechanical properties and corrosion resistance by grain refinement or by alloying by interstitial elements. At the same time innovations are coming from the manufacturing process of such a family of materials, also including the possibility to manufacture them starting from metals powder for 3D printing. The Special Issue scope embraces interdisciplinary work covering physical metallurgy and processes, reporting about experimental and theoretical progress concerning microstructural evolution during processing, microstructure-properties relations, applications including automotive, energy and structural.
Download or read book Field Assisted Sintering written by Eugene A. Olevsky and published by Springer. This book was released on 2018-08-09 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book represents the first ever scientific monograph including an in-depth analysis of all major field-assisted sintering techniques. Until now, the electromagnetic field-assisted technologies of materials processing were lacking a systematic and generalized description in one fundamental publication; this work promotes the development of generalized concepts and of comparative analyses in this emerging area of materials fabrication. This book describes modern technologies for the powder processing-based fabrication of advanced materials. New approaches for the development of well-tailored and stable structures are thoroughly discussed. Since the potential of traditional thermo-mechanical methods of material treatment is limited due to inadequate control during processing, the book addresses ways to more accurately control the resultant material's structure and properties by an assisting application of electro-magnetic fields. The book describes resistance sintering, high-voltage consolidation, sintering by low-voltage electric pulses (including spark plasma sintering), flash sintering, microwave sintering, induction heating sintering, magnetic pulse compaction and other field-assisted sintering techniques. Includes an in-depth analysis of all major field-assisted sintering techniques; Explains new techniques and approaches for material treatment; Provides detailed descriptions of spark plasma sintering, microwave sintering, high-voltage consolidation, magnetic pulse compaction, and various other approaches when field-assisted treatment is applied.
Download or read book Engineering Materials 1 written by M. F. Ashby and published by . This book was released on 1996 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a broad introduction to the properties of materials used in engineering applications, and is intended to provide a course in engineering materials for students with no previous background in the subject.
Download or read book Aerospace Materials and Applications written by Biliyar N. Bhat and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The present volume is focused on documenting the novel processing, fabrication, characterization, and testing approaches that are unique to aerospace materials/structures/systems"--Preface.