Download or read book Characterization of Conical and Elliptical Fuel Spray Nozzles Using Non intrusive Laser Diagnostic Methods written by Khalid Koraitem and published by . This book was released on 2011 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spray nozzles and atomizers have several applications in many forms of industry such as aerospace, automotive, combustion, pharmaceutical, and spray coating industries. These nozzles vary in design and performance depending on the application they are used in. Nevertheless, the primary objective for all atomizers is to disperse liquids in a controlled and uniformed manner while minimizing the amount of energy needed in the breakup process to achieve high quality atomization. Air-assist and air-blast atomizers are fuel injector nozzles commonly used in gas turbine engines in the aerospace, and power generation industries. The flow in these atomizers is considered to be two-phase flow since a portion of air taken from the compressor is also used to assist in the breakup of the fuel inside the combustion chamber. These nozzles play a critical role in determining the efficiency of gas turbine engines as their ability to disperse liquid fuel into fine droplets allows for better mixture and evaporation rates; therefore, improving engine performance, reducing emissions, and maximizing fuel efficiency. The objective of this study is to experimentally analyze two gas turbine fuel injector nozzles. The first nozzle is a standard hollow cone nozzle currently used in gas turbine engines, whereas the other is a hollow elliptical nozzle designed to offer greater control over fuel distribution as well as improve overall atomization. The nozzles are investigated under varying gas to liquid ratios (GLR) where key spray parameters such as droplet diameter, velocity, volume flux, as well as spray angle are measured to characterize the nozzles using methods such as Shadowgraph, Optical Patternation, Phase Doppler Particle Analyzer (PDPA), and Particle Image Velocimetry (PIV).
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1983 with total page 1368 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electrified Aircraft Propulsion written by Kiruba Haran and published by Cambridge University Press. This book was released on 2022-05-26 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: What are the benefits of electrified propulsion for large aircraft? What technology advancements are required to realize these benefits? How can the aerospace industry transition from today's technologies to state-of-the-art electrified systems? Learn the answers with this multidisciplinary text, combining expertise from leading researchers in electrified aircraft propulsion. The book includes broad coverage of electrification technologies – spanning power systems and power electronics, materials science, superconductivity and cryogenics, thermal management, battery chemistry, system design, and system optimization – and a clear-cut road map identifying remaining gaps between the current state-of-the-art and future performance technologies. Providing expert guidance on areas for future research and investment and an ideal introduction to cutting-edge advances and outstanding challenges in large electric aircraft design, this is a perfect resource for graduate students, researchers, electrical and aeronautical engineers, policymakers, and management professionals interested in next-generation commercial flight technologies.
Download or read book Characterisation of Bulk Solids written by Don McGlinchey and published by John Wiley & Sons. This book was released on 2009-02-12 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handling of powders and bulk solids is a critical industrial technology across a broad spectrum of industries, from minerals processing to bulk and fine chemicals, and the food and pharmaceutical industries, yet is rarely found in the curricula of engineering or chemistry departments. With contributions from leading authors in their respective fields, Characterisation of Bulk Solids provides the reader with a sound understanding of the techniques, importance and application of particulate materials characterisation. It covers the fundamental characteristics of individual particles and bulk particulate materials, and includes discussion of a wide range of measurement techniques, and the use of material characteristics in design and industrial practice. The reader will then be in a better position to diagnose solids handling and processing problems in industry, and to deal with experts and equipment suppliers from an informed standpoint. Written for post-graduate engineers, chemical scientists and technologists at all stages of their industrial career, the book will also serve as an ideal primer in any of the specialist areas to inform further study.
Download or read book Automotive Painting Technology written by Kimio Toda and published by Springer Science & Business Media. This book was released on 2012-12-21 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers unique and valuable contributions to the field. It offers breadth and inclusiveness. Most existing works on automotive painting cover only a single aspect of this complex topic, such as the chemistry of paint or paint booth technology. Monozukuri and Hitozukuri are Japanese terms that can be translated as “making things” and “developing people” but their implications in Japanese are richer and more complex than this minimal translation would indicate. The Monozukuri-Hitozukuri perspective is drawn from essential principles on which the Toyota approach to problem-solving and continuous improvement is based. From this perspective, neither painting technology R&D nor painting technology use in manufacturing can be done successfully without integrating technological and human concerns involved with making and learning in the broadest sense, as the hyphen is meant to indicate. The editors provide case studies and examples -- drawn from Mr. Toda’s 33 years of experience with automotive painting at Toyota and from Dr. Saito’s 18 years experience with IR4TD, the research-for-development group he leads at the University of Kentucky -- that give details on how these two principles can be integrated for successful problem-solving and innovation in industry, in university R&D, and in the collaboration between the two. The book will bring readers up to date on progress in the field over the last decade to provide a basis for and to indicate fruitful directions in future R&D and technology innovation for automotive painting.
Download or read book The Fingerprint written by U. S. Department Justice and published by Createspace Independent Publishing Platform. This book was released on 2014-08-02 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The idea of The Fingerprint Sourcebook originated during a meeting in April 2002. Individuals representing the fingerprint, academic, and scientific communities met in Chicago, Illinois, for a day and a half to discuss the state of fingerprint identification with a view toward the challenges raised by Daubert issues. The meeting was a joint project between the International Association for Identification (IAI) and West Virginia University (WVU). One recommendation that came out of that meeting was a suggestion to create a sourcebook for friction ridge examiners, that is, a single source of researched information regarding the subject. This sourcebook would provide educational, training, and research information for the international scientific community.
Download or read book Laser Techniques for Fluid Mechanics written by R.J. Adrian and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume includes revised and extended versions of selected papers presented at the Tenth International Symposium on Applications of Laser Techniques to Fluid Mechanics held at the Calouste Gulbenkian Foundation in Lisbon, during the period of July 10 to 13, 2000. The papers describe instrumentation developments for Velocity, Scalar and Multi-Phase Flows and results of measurements of Turbulent Flows, and Combustion and Engines. The papers demonstrate the continuing and healthy interest in the development of understanding of new methodologies and implementation in terms of new instrumentation. The prime objective of the Tenth Symposium was to provide a forum for the presentation of the most advanced research on laser techniques for flow measurements, and communicate significant results to fluid mechanics. The application of laser techniques to scientific and engineering fluid flow research was emphasized, but contributions to the theory and practice of laser methods were also considered where they facilitate new improved fluid mechanic research. Attention was placed on laser-Doppler anemometry, particle sizing and other methods for the measurement of velocity and scalars, such as particle image velocimetry and laser induced fluorescence.
Download or read book Electrospun Nanofibers written by Mehdi Afshari and published by Woodhead Publishing. This book was released on 2016-09-13 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrospun Nanofibers covers advances in the electrospinning process including characterization, testing and modeling of electrospun nanofibers, and electrospinning for particular fiber types and applications. Electrospun Nanofibers offers systematic and comprehensive coverage for academic researchers, industry professionals, and postgraduate students working in the field of fiber science. Electrospinning is the most commercially successful process for the production of nanofibers and rising demand is driving research and development in this field. Rapid progress is being made both in terms of the electrospinning process and in the production of nanofibers with superior chemical and physical properties. Electrospinning is becoming more efficient and more specialized in order to produce particular fiber types such as bicomponent and composite fibers, patterned and 3D nanofibers, carbon nanofibers and nanotubes, and nanofibers derived from chitosan. Provides systematic and comprehensive coverage of the manufacture, properties, and applications of nanofibers Covers recent developments in nanofibers materials including electrospinning of bicomponent, chitosan, carbon, and conductive fibers Brings together expertise from academia and industry to provide comprehensive, up-to-date information on nanofiber research and development Offers systematic and comprehensive coverage for academic researchers, industry professionals, and postgraduate students working in the field of fiber science
Download or read book Advances in High Temperature Gas Cooled Reactor Fuel Technology written by International Atomic Energy Agency and published by . This book was released on 2012-06 with total page 639 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication reports on the results of a coordinated research project on advances in high temperature gas cooled reactor (HTGR) fuel technology and describes the findings of research activities on coated particle developments. These comprise two specific benchmark exercises with the application of HTGR fuel performance and fission product release codes, which helped compare the quality and validity of the computer models against experimental data. The project participants also examined techniques for fuel characterization and advanced quality assessment/quality control. The key exercise included a round-robin experimental study on the measurements of fuel kernel and particle coating properties of recent Korean, South African and US coated particle productions applying the respective qualification measures of each participating Member State. The summary report documents the results and conclusions achieved by the project and underlines the added value to contemporary knowledge on HTGR fuel.
Download or read book Spectroscopic Methods for Nanomaterials Characterization written by Sabu Thomas and published by Elsevier. This book was released on 2017-05-19 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanomaterials Characterization Techniques, Volume Two, part of an ongoing series, offers a detailed analysis of the different types of spectroscopic methods currently being used in nanocharacterization. These include, for example, the Raman spectroscopic method for the characterization of carbon nanotubes (CNTs). This book outlines the different kinds of spectroscopic tools being used for the characterization of nanomaterials and discusses under what conditions each should be used. The book is intended to cover all the major spectroscopic techniques for nanocharacterization, making it an important resource for both the academic community at the research level and the industrial community involved in nanomanufacturing. Explores how spectroscopy and X-ray-based nanocharacterization techniques are applied in modern industry Analyzes all the major spectroscopy and X-ray-based nanocharacterization techniques, allowing the reader to choose the best for their situation Presents a method-orientated approach that explains how to successfully use each technique
Download or read book Shock Wave Boundary Layer Interactions written by Holger Babinsky and published by Cambridge University Press. This book was released on 2011-09-12 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shock wave-boundary-layer interaction (SBLI) is a fundamental phenomenon in gas dynamics that is observed in many practical situations, ranging from transonic aircraft wings to hypersonic vehicles and engines. SBLIs have the potential to pose serious problems in a flowfield; hence they often prove to be a critical - or even design limiting - issue for many aerospace applications. This is the first book devoted solely to a comprehensive, state-of-the-art explanation of this phenomenon. It includes a description of the basic fluid mechanics of SBLIs plus contributions from leading international experts who share their insight into their physics and the impact they have in practical flow situations. This book is for practitioners and graduate students in aerodynamics who wish to familiarize themselves with all aspects of SBLI flows. It is a valuable resource for specialists because it compiles experimental, computational and theoretical knowledge in one place.
Download or read book High Lift Aerodynamics written by Jochen Wild and published by CRC Press. This book was released on 2022-02-03 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a detailed look at high-lift aerodynamics, which deals with the aerodynamic behavior of lift augmentation means from various approaches. After an introductory chapter, the book discusses the physical limits of lift generation, giving the lift generation potential. It then explains what is needed for an aircraft to fly safely by analyzing the high-lift-related requirements for certifying an aircraft. Aircraft needs are also analyzed to improve performance during takeoff, approach, and landing. The book discusses in detail the applied means to increase the lift coefficient by either passive and active high-lift systems. It includes slotless and slotted high-lift flaps, active and passive vortex generating devices, boundary and circulation control, and powered lift. Describing methods that are used to evaluate and design high-lift systems in an aerodynamic sense, the book briefly covers numerical as well as experimental simulation methods. It also includes a chapter on the aerodynamic design of high-lift systems. FEATURES Provides an understanding of the physics of flight during takeoff and landing from aerodynamics to flight performance and from simulation to design Discusses the physical limits of lift generation, giving the lift generation potential Concentrates on the specifics of high-lift aerodynamics to provide a first insight Analyzes aircraft needs to improve performance during takeoff, approach, and landing Focuses on civil transport aircraft applications but also includes the associated physics that apply to all aircraft This book is intended for graduate students in aerospace programs studying advanced aerodynamics and aircraft design. It also serves as a professional reference for practicing aerospace and mechanical engineers who are working on aircraft design issues related to takeoff and landing.
Download or read book Failure Analysis of Heat Treated Steel Components written by Lauralice de Campos Franceschini Canale and published by ASM International. This book was released on 2008 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Department of Defense Dictionary of Military and Associated Terms written by and published by . This book was released on 1994 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lab on Fiber Technology written by Andrea Cusano and published by Springer. This book was released on 2014-07-29 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on a research field that is rapidly emerging as one of the most promising ones for the global optics and photonics community: the “lab-on-fiber” technology. Inspired by the well-established "lab on-a-chip" concept, this new technology essentially envisages novel and highly functionalized devices completely integrated into a single optical fiber for both communication and sensing applications. Based on the R&D experience of some of the world's leading authorities in the fields of optics, photonics, nanotechnology, and material science, this book provides a broad and accurate description of the main developments and achievements in the lab-on-fiber technology roadmap, also highlighting the new perspectives and challenges to be faced. This book is essential for scientists interested in the cutting-edge fiber optic technology, but also for graduate students.
Download or read book Handbook of hair in health and disease written by Victor R. Preedy and published by Springer. This book was released on 2012-05-23 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hair is a major component of the body's tissue system that contributes to the individual's make up and confers a large degree of personal identity. Apart from its visible façade, hair also has a functional role. It has an unique structure and complex molecular development. The very nature of hair makes it a suitable marker for the prognosis of disease. Hair can also be used to screen for toxins and changes in the diet. However, there are currently no suitable publications available that describe hair in a rational scientific context. This handbook provides an academic approach to hair in health and disease. Divided into five sections the Handbook of Hair in Health and Disease provides an insight into hair growth and loss, molecular and cellular biology of hair, dietary toxicity and pathological history, diseases and treatments of hair, as well as shampoos and conditioners. Unique features of each chapter in this volume include relevant and useful 'Key facts' which highlight interesting or important findings of the specific subjects and 'Summary points' that will give a clear overview of the subjects treated in each chapter. The Handbook of Hair in Health and Disease will be essential to a variety of users, such as trichologists, doctors and nurses and all those interested or working within the area of hair health. This includes nutritionists and dieticians, scientific beauticians, health workers and practitioners, college and university lecturers and undergraduate and graduate students.
Download or read book Technologies underlying weapons of mass destruction written by and published by DIANE Publishing. This book was released on with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt:
