Download or read book Characteristics of Reinforced Concrete Beam to column Connections Subjected to Dynamic Loads written by Robert Michael McCafferty and published by . This book was released on 1972 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Strength and Behavior of Reinforced Concrete Slab column Connections Subjected to Static and Dynamic Loadings written by Marvin E. Criswell and published by . This book was released on 1970 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objectives of this investigation were to study the strength and behavior of slowly (statically) loaded reinforced concrete slab-column connections and to determine the effect of rapid (dynamic) loading on the strength and behavior by comparison with the static test results. Nineteen full-scale models of a connection and adjoining slab area, consisting of a simply supported slab 84 or 94 inches square and 6-1/2 inches thick loaded concentrically on a 10- or 20-inch-square stub column at the center of the slab, were tested. The main variables were the amounts of reinforcement in the slab (p = 0.75 and 1.50 percent), the column size, and the loading speed. Eight specimens were loaded to failure statically, two were subjected to a very rapidly applied load of short duration, and nine were loaded to failure by a rapidly applied load with a rise time chosen to represent the conditions in a blast-loaded structure. The static test results are compared with 12 shear strength prediction methods. Differences between the mechanism of shear failure in slabs and beams are examined. (Author).

Download or read book Load deformation Characteristics of Beam column Connections in Reinforced Concrete written by Ned Hamilton Burns and published by . This book was released on 1962 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Response of Reinforced Concrete Columns Subjected to Dynamic Loads written by Saul A. Nuccitelli and published by . This book was released on 1960 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Load deformation Characteristics of Simulated Beam column Connections in Reinforced Concrete written by H. M. McCollister and published by . This book was released on 1954 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Load deformation Characteristics of Simulated Beam column Connections in Reinforced Concrete written by Howard Morton McCollister and published by . This book was released on 1954 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Shock and Vibration Digest written by and published by . This book was released on 1973 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book BEHAVIOR OF EXTERNAL REINFORCED CONCRETE BEAM TO COLUMN CONNECTIONS SUBJECTED TO EARTHQUAKE TYPE LOADING written by Mohammad Reza Ehsani and published by . This book was released on 1982 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: the additional confinement provided by these elements.

Download or read book Industrial Carbon and Graphite Materials written by Hubert Jaeger and published by John Wiley & Sons. This book was released on 2021-03-05 with total page 1008 pages. Available in PDF, EPUB and Kindle. Book excerpt: An excellent overview of industrial carbon and graphite materials, especially their manufacture, use and applications in industry. Following a short introduction, the main part of this reference deals with industrial forms, their raw materials, properties and manifold applications. Featuring chapters on carbon and graphite materials in energy application, and as catalysts. It covers all important classes of carbon and graphite, from polygranular materials to fullerenes, and from activated carbon to carbon blacks and nanoforms of carbon. Indispensable for chemists and engineers working in such fields as steel, aluminum, electrochemistry, nanotechnology, catalyst, carbon fibres and lightweight composites.

Download or read book Strength and Behavior of Reinforced Concrete Slab column Connections Subjected to Static and Dynamic Loadings written by Marvin E. Criswell and published by . This book was released on 1970 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Response of Reinforced Concrete Plate column Connections to Dynamic and Static Horizontal Loads written by Denby G. Morrison and published by . This book was released on 1981 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1985 with total page 1346 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Reinforced Concrete Structures under Cyclic Loading written by Farhad Aslani and published by Trans Tech Publications Ltd. This book was released on 2015-03-14 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experimental programs in laboratories give real results to identify nonlinear behavior of reinforced concrete (RC) structures but they are limited to knowledge of particular cases under restricted structural dimensions, sizes, shapes, loading and boundary conditions but the computational simulation approach has no limit to its application. Constitutive models are developed to simulate the dynamic nonlinear response of concrete and steel reinforcement subjected to cyclic loading varying randomly in magnitude. The behavior of structural concrete under monotonic loading is affected by important material aspects including cracking, crushing, tension stiffening, compression softening and bond slip. Reversed cyclic loading introduces further complexities such as stiffness degradation in concrete and the Bauschinger effect in reinforcing steel. In this research the validity and reliability of some proposed constitutive models for concrete considering general loading i.e. cyclic, monotonic, partial, common point and transition loading are evaluated. Amongst many existing constitutive models, because of their simplicity and common usage in the finite element analysis of RC structures, only some common proposed models based on nonlinear elasticity-based approach are investigated. These models are verified against experimental data available in the literature and the results are discussed. In this study, also, a hysteretic stress–strain model is developed for unconfined concrete with the intention of providing efficient modeling for the structural behavior of concrete in seismic regions. The proposed model is based on the findings of previous experimental and analytical studies. The model for concrete subjected to monotonic and cyclic loading, comprises four components in compression and tension; an envelope curve (for monotonic and cyclic loading), an unloading curve, a reloading curve, and transition curve. Also presented are formulations for partial unloading and partial reloading curves. The proposed Constitutive model reliability is investigated by RC members non-linear finite element analysis (FEM) using by finite element software ABAQUS. Comparisons with test results showed that the proposed model provides a good fit to a wide range of experimentally established hysteresis loops.

Download or read book Experimental and Anlaytical Study of Reinforced Concrete External Beam column Connections Subjected to Cyclic Loading written by Yahia Bousri and published by . This book was released on 1994 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book CEB FIP Model Code 1990 written by FIB – International Federation for Structural Concrete and published by fib Fédération internationale du béton. This book was released on 1993-01-01 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: This design code for concrete structures is the result of a complete revision to the former Model Code 1978, which was produced jointly by CEB and FIP. The 1978 Model Code has had a considerable impact on the national design codes in many countries. In particular, it has been used extensively for the harmonisation of national design codes and as basic reference for Eurocode 2. The 1990 Model Code provides comprehensive guidance to the scientific and technical developments that have occurred over the past decade in the safety, analysis and design of concrete structures. It has already influenced the codification work that is being carried out both nationally and internationally and will continue so to do.

Download or read book Behavioural Characteristics of the Reinforced Concrete Beam column Connection written by D. L. Harrison and published by . This book was released on 1972 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Finite Element Modelling of Structural Concrete written by Michael D. Kotsovos and published by CRC Press. This book was released on 2015-05-20 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Powerful Tool for the Analysis and Design of Complex Structural ElementsFinite-Element Modelling of Structural Concrete: Short-Term Static and Dynamic Loading Conditions presents a finite-element model of structural concrete under short-term loading, covering the whole range of short-term loading conditions, from static (monotonic and cyclic) to