Download or read book Characterisation of Ferroelectric Bulk Materials and Thin Films written by Markys G. Cain and published by Springer. This book was released on 2014-06-02 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive review of the most important methods used in the characterisation of piezoelectric, ferroelectric and pyroelectric materials. It covers techniques for the analysis of bulk materials and thick and thin film materials and devices. There is a growing demand by industry to adapt and integrate piezoelectric materials into ever smaller devices and structures. Such applications development requires the joint development of reliable, robust, accurate and – most importantly – relevant and applicable measurement and characterisation methods and models. In the past few years there has been a rapid development of new techniques to model and measure the variety of properties that are deemed important for applications development engineers and scientists. The book has been written by the leaders in the field and many chapters represent established measurement best practice, with a strong emphasis on application of the methods via worked examples and detailed experimental procedural descriptions. Each chapter contains numerous diagrams, images, and measurement data, all of which are fully referenced and indexed. The book is intended to occupy space in the research or technical lab, and will be a valuable and practical resource for students, materials scientists, engineers, and lab technicians.
Download or read book Ferroelectric Thin Films written by Carlos Paz de Araujo and published by Taylor & Francis US. This book was released on 1996 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: The impetus for the rapid development of thin film technology, relative to that of bulk materials, is its application to a variety of microelectronic products. Many of the characteristics of thin film ferroelectric materials are utilized in the development of these products - namely, their nonvolatile memory and piezoelectric, pyroelectric, and electro-optic properties. It is befitting, therefore, that the first of a set of three complementary books with the general title Integrated Ferroelectric Devices and Technologies focuses on the synthesis of thin film ferroelectric materials and their basic properties. Because it is a basic introduction to the chemistry, materials science, processing, and physics of the materials from which integrated ferroelectrics are made, newcomers to this field as well as veterans will find this book self-contained and invaluable in acquiring the diverse elements requisite to success in their work in this area. It is directed at electronic engineers and physicists as well as process and system engineers, ceramicists, and chemists involved in the research, design, development, manufacturing, and utilization of thin film ferroelectric materials.
Download or read book Nanoscale Phenomena in Ferroelectric Thin Films written by Seungbum Hong and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the recent advances in the field of nanoscale science and engineering of ferroelectric thin films. It comprises two main parts, i.e. electrical characterization in nanoscale ferroelectric capacitor, and nano domain manipulation and visualization in ferroelectric materials. Well known le'adingexperts both in relevant academia and industry over the world (U.S., Japan, Germany, Switzerland, Korea) were invited to contribute to each chapter. The first part under the title of electrical characterization in nanoscale ferroelectric capacitors starts with Chapter 1, "Testing and characterization of ferroelectric thin film capacitors," written by Dr. I. K. Yoo. The author provides a comprehensive review on basic concepts and terminologies of ferroelectric properties and their testing methods. This chapter also covers reliability issues in FeRAMs that are crucial for commercialization of high density memory products. In Chapter 2, "Size effects in ferroelectric film capacitors: role ofthe film thickness and capacitor size," Dr. I. Stolichnov discusses the size effects both in in-plane and out-of-plane dimensions of the ferroelectric thin film. The author successfully relates the electric performance and domain dynamics with proposed models of charge injection and stress induced phase transition. The author's findings present both a challenging problem and the clue to its solution of reliably predicting the switching properties for ultra-thin ferroelectric capacitors. In Chapter 3, "Ferroelectric thin films for memory applications: nanoscale characterization by scanning force microscopy," Prof. A.
Download or read book The Physics of Degradation in Engineered Materials and Devices written by Jonathan Swingler and published by Momentum Press. This book was released on 2014-12-23 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Degradation is apparent in all things and is fundamental to both manufactured and natural objects. It is often described by the second law of thermodynamics, where entropy, a measure of disorder, tends to increase with time in a closed system. Things age! This concise reference work brings together experts and key players engaged in the physics of degradation to present the background science, current thinking and developments in understanding, and gives a detailed account of emerging issues across a selection of engineering applications. The work has been put together to equip the upper level undergraduate student, postgraduate student, as well as the professional engineer and scientist, in the importance of physics of degradation. The aim of The Physics of Degradation in Engineered Materials and Devices is to bridge the gap between published textbooks on the fundamental science of degradation phenomena and published research on the engineering science of actual fabricated materials and devices. A history of the observation and understanding of physics of degradation is presented and the fundamentals and principles of thermodynamics and entropy are extensively discussed. This is the focus of this book, with an extended chapter by Alec Feinberg on equilibrium thermodynamic damage and non-equilibrium thermodynamic damage. It concludes with two particular technologies to give examples of areas of application.
Download or read book Ferroelectric Materials for Energy Harvesting and Storage written by Deepam Maurya and published by Woodhead Publishing. This book was released on 2020-10-14 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need to more efficiently harvest energy for electronics has spurred investigation into materials that can harvest energy from locally abundant sources. Ferroelectric Materials for Energy Harvesting and Storage is the first book to bring together fundamental mechanisms for harvesting various abundant energy sources using ferroelectric and piezoelectric materials. The authors discuss strategies of designing materials for efficiently harvesting energy sources like solar, wind, wave, temperature fluctuations, mechanical vibrations, biomechanical motion, and stray magnetic fields. In addition, concepts of the high density energy storage using ferroelectric materials is explored. Ferroelectric Materials for Energy Harvesting and Storage is appropriate for those working in materials science and engineering, physics, chemistry and electrical engineering disciplines. - Reviews wide range of energy harvesting including solar, wind, biomechanical and more - Discusses ferroelectric materials and their application to high energy density capacitors - Includes review of fundamental mechanisms of energy harvesting and energy solutions, their design and current applications, and future trends and challenges
Download or read book Synthesis and Characterisation of Ferroelectric Thin Films Via Sol gel Routes written by Anirban Chowdhury and published by . This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Silicon Sensors and Actuators written by Benedetto Vigna and published by Springer Nature. This book was released on 2022-04-12 with total page 988 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book thoroughly reviews the present knowledge on silicon micromechanical transducers and addresses emerging and future technology challenges. Readers will acquire a solid theoretical and practical background that will allow them to analyze the key performance aspects of devices, critically judge a fabrication process, and then conceive and design new ones for future applications. Envisioning a future complex versatile microsystem, the authors take inspiration from Richard Feynman’s visionary talk “There is Plenty of Room at the Bottom” to propose that the time has come to see silicon sensors as part of a “Feynman Roadmap” instead of the “More-than-Moore” technology roadmap. The sharing of the author’s industrially proven track record of development, design, and manufacturing, along with their visionary approach to the technology, will allow readers to jump ahead in their understanding of the core of the topic in a very effective way. Students, researchers, engineers, and technologists involved in silicon-based sensor and actuator research and development will find a wealth of useful and groundbreaking information in this book.
Download or read book Advanced Functional Piezoelectric Materials and Applications written by Inamuddin and published by Materials Research Forum LLC. This book was released on 2022-10-05 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book reviews our current knowledge of piezoelectric materials, including their history, developments, properties, process design, and technical applications in such areas as sensors, actuators, power sources, motors, environmental and biomedical domains. Piezoelectric materials will play a crucial role in the development of sustainable energy systems. Keywords: Piezoelectric Materials, Piezo-crystals, Nanogenerators, Phototronics, Piezoelectric Composites, Biomedical Applications, Energy Harvesting, Piezoelectric Thin Films, Piezoelectric Perovskites, Sensor Applications, Piezoelectric Ceramics, Piezoelectric Semiconductors, Piezoelectric Polymers.
Download or read book Ferroelectric Materials and Their Applications written by Y. Xu and published by Elsevier. This book was released on 2013-10-22 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the basic physical properties, structure, fabrication methods and applications of ferroelectric materials. These are widely used in various devices, such as piezoelectric/electrostrictive transducers and actuators, pyroelectric infrared detectors, optical integrated circuits, optical data storage, display devices, etc. The ferroelectric materials described in this book include a relatively complete list of practical and promising ferroelectric single crystals, bulk ceramics and thin films. Included are perovskite-type, lithium niobate, tungsten-bronze-type, water-soluable crystals and other inorganic materials, as well as organic ferroelectrics (polymers, liquid crystals, and composites). Basic concepts, principles and methods for the physical property characteristics of ferroelectric materials are introduced in the first two chapters for those readers new to the subject of ferroelectricity. Not only professional researchers and engineers but also students and other readers who have limited physical knowledge and an interest in ferroelectrics, will welcome this book.
Download or read book Magnetoelectric Polymer Based Composites written by Senentxu Lanceros-Méndez and published by John Wiley & Sons. This book was released on 2017-10-23 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book on this topic provides a comprehensive and well-structured overview of the fundamentals, synthesis and emerging applications of magnetoelectric polymer materials. Following an introduction to the basic aspects of polymer based magnetoelectric materials and recent developments, subsequent chapters discuss the various types as well as their synthesis and characterization. There then follows a review of the latest applications, such as memories, sensors and actuators. The book concludes with a look at future technological advances. An essential reference for entrants to the field as well as for experienced researchers.
Download or read book Physics and Mechanics of New Materials and Their Applications written by Ivan A. Parinov and published by Springer Nature. This book was released on with total page 667 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lead Free Piezoelectric Materials written by Jing-Feng Li and published by John Wiley & Sons. This book was released on 2021-07-06 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides in-depth knowledge on lead-free piezoelectrics - for state-of-the-art, environmentally friendly electrical and electronic devices! Lead zirconate titanate ceramics have been market-dominating due to their excellent properties and flexibility in terms of compositional modifications. Driven by the Restriction of Hazardous Substances Directive, there is a growing concern on the toxicity of lead. Therefore, numerous research efforts were devoted to lead-free piezoelectrics from the beginning of this century. Great progress has been made in the development of high-performance lead-free piezoelectric ceramics which are already used, e.g., for power electronics applications. Lead-Free Piezoelectric Materials provides an in-depth overview of principles, material systems, and applications of lead-free piezoelectric materials. It starts with the fundamentals of piezoelectricity and lead-free piezoelectrics. Then it discusses four representative lead-free piezoelectric material systems from background introduction to crystal structures and properties. Finally, it presents several applications of lead-free piezoelectrics including piezoelectric actuators, and transducers. The challenges for promoting applications will also be discussed. Highly attractive: Lead-free piezoelectrics address the growing concerns on exclusion of hazardous substances used in electrical and electronic devices in order to protect human health and the environment Thorough overview: Covers fundamentals, different classes of materials, processing and applications Unique: discusses fundamentals and recent advancements in the field of lead-free piezoelectrics Lead-Free Piezoelectric Materials is of high interest for material scientists, electrical and chemical engineers, solid state chemists and physicists in academia and industry.
Download or read book Thin Film Ferroelectric Materials and Devices written by R. Ramesh and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: The past five years have witnessed some dramatic developments in the general area of ferroelectric thin films materials and devices. Ferroelectrics are not new materials by any stretch ofimagination. Indeed, they have been known since the early partofthis century and popular ferroelectric materials such as Barium Titanate have been in use since the second world war. In the late sixties and seventies, a considerable amountofresearch and development effort was made to create a solid state nonvolatile memory using ferroelectrics in a vary simple matrix-addressed scheme. These attempts failed primarily due to problems associated with either the materials ordue to device architectures. The early eighties saw the advent of new materials processing approaches, such as sol-gel processing, that enabled researchers to fabricate sub-micron thin films of ferroelectric materials on a silicon substrate. These pioneering developments signaled the onsetofa revival in the areaofferroelectric thin films, especially ferroelectric nonvolatile memories. Research and development effort in ferroelectric materials and devices has now hit a feverish pitch, Many university laboratories, national laboratories and advanced R&D laboratories oflarge IC manufacturers are deeply involved in the pursuit of ferroelectric device technologies. Many companies worldwide are investing considerable manpower and resources into ferroelectric technologies. Some have already announced products ranging from embedded memories in micro controllers, low density stand-alone memories, microwave circuit elements, andrf identification tags. There is now considerable optimism that ferroelectric devices andproducts will occupy a significant market-share in the new millennium.
Download or read book Ultraviolet Light Curable Piezoelectric Multi phase Composites written by Rytis Mitkus and published by Springer Nature. This book was released on 2024 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers extensive knowledge and characterization methods for Ultraviolet light curable piezoelectric 0-3 composites for researchers and industry. The book provides extensive research on the use of carbon-based conductive nanoparticles to improve the performance of Ultraviolet light curable piezoelectric composites, forming piezoelectric 0-0-3 composites. Materials researched include Barium Titanate (BTO), Sodium Potassium Niobate (KNN), Graphene Nanoplatelets (GNP), Multi-Walled Carbon Nanotubes (MWCNT) and Graphene Oxide (GO). A comprehensive literature review on piezoelectric 0-3 composites focuses on the main influencing factors to achieve high piezoelectric composite performance. The method to characterize the performance of piezoelectric composites using 4-point bending is adopted from literature, is characterized, and adopted for performance measurements.
Download or read book Power Ultrasonics written by Juan A. Gallego-Juarez and published by Woodhead Publishing. This book was released on 2023-04-06 with total page 948 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Ultrasonics: Applications of High-Intensity Ultrasound, Second Edition provides a comprehensive reference on the fundamentals, processing, engineering, medical, food and pharmaceutical applications of ultrasonic processing. Chapters cover the fundamentals of nonlinear propagation of ultrasonic waves in fluids and solids, discuss the materials and designs of power ultrasonic transducers and devices, identify applications of high power ultrasound in materials engineering and mechanical engineering, food processing technology, environmental monitoring and remediation and industrial and chemical processing (including pharmaceuticals), medicine and biotechnology, and cover developments in ultrasound therapy and surgery applications.The new edition also includes recent advances in modeling, characterization and measurement techniques, along with additive manufacturing and micromanufacturing. This is an invaluable reference for graduate students and researchers working in the disciplines of materials science and engineering. In addition, those working on the physics of acoustics, sound and ultrasound, sonochemistry, acoustic engineering and industrial process technology, R&D managers, production, and biomedical engineers will find it useful to their work. - Covers the fundamentals of nonlinear propagation of ultrasonic waves in fluids and solids - Discusses the materials and designs of power ultrasonic transducers and devices - Considers state-of-the-art power sonic applications across a wide range of industries
Download or read book Ferroelectrics written by Mickaël Lallart and published by BoD – Books on Demand. This book was released on 2011-08-23 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ferroelectric materials have been and still are widely used in many applications, that have moved from sonar towards breakthrough technologies such as memories or optical devices. This book is a part of a four volume collection (covering material aspects, physical effects, characterization and modeling, and applications) and focuses on the characterization of ferroelectric materials, including structural, electrical and multiphysic aspects, as well as innovative techniques for modeling and predicting the performance of these devices using phenomenological approaches and nonlinear methods. Hence, the aim of this book is to provide an up-to-date review of recent scientific findings and recent advances in the field of ferroelectric system characterization and modeling, allowing a deep understanding of ferroelectricity.
Download or read book Nanoscale Characterisation of Ferroelectric Materials written by Marin Alexe and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent advances in the field of nanoscale characterization of ferroelectric materials using scanning probe microscopy (SPM). It addresses various imaging mechanisms of ferroelectric domains in SPM, quantitative analysis of the piezoresponse signals as well as basic physics of ferroelectrics at the nanoscale level, such as nanoscale switching, scaling effects, and transport behavior. This state-of-the-art review of theory and experiments on nanoscale polarization phenomena will be a useful reference for advanced readers as well for newcomers and graduate students interested in the SPM techniques. The non-specialists will obtain valuable information about different approaches to electrical characterization by SPM, while researchers in the ferroelectric field will be provided with details of SPM-based measurements of ferroelectrics.
