Download or read book Centrifuge Modelling of Footings on a Finite Soil Layer Underlain by a Rigid Base written by Catherine Dianne Rochelle Brown and published by . This book was released on 2003 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Effect of Presence of Rigid Base Within the Soil on the Dynamic Response of Rigid Surface Foundation written by A. Mandal and published by . This book was released on 2004 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present experimental investigations study the effect of presence of rigid base at any depth within the soil mass on the dynamic response of foundation under vertical mode of vibration. Model block vibration tests on rigid surface footing are conducted on a different soil layer of finite thicknesses underlain by a rigid base. A concrete block of size 400 × 400 × 100 mm is used as the model block, and a Lazan type mechanical oscillator is used for inducing vibration in vertical direction. The finite soil layers of different thicknesses are prepared in a pit at the bottom of which a massive concrete layer of 300 mm thick was cast to represent it as a rigid base. In the investigation two different soils, namely, local in situ soil and sand are used. In total 72 tests are conducted in different loading combinations and soil types, and several important observations are reported. Two different methods are proposed to analyze the dynamic response of a foundation resting on a finite layer underlain by a rigid layer. Finally, the experimental results are compared with the results that were obtained by the proposed method. A Mass-Spring-Dashpot (MSD) model with proper consideration of damping factor is found to provide reasonably accurate results. Elastic Half Space Theory (EHST) with equivalent soil properties is found to underestimate the displacement amplitude.

Download or read book Centrifuges in Soil Mechanics written by W.H. Craig and published by CRC Press. This book was released on 2020-08-26 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains technical papers, presented in a discussion session at the XI International Conference on Soil Mechanics and Foundation Engineering held in San Francisco in 1985, on the role of centrifuge in geotechnical testing, with descriptions of test facilities.

Download or read book Advances in Unsaturated Soils written by Bernardo Caicedo and published by CRC Press. This book was released on 2013-01-17 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: New theories and testing techniques related with Unsaturated Soil Mechanics have proven to be valuable tools to study a broad spectrum of geo-materials which includes rocks, rock fills, frozen soils and domiciliary solid wastes. These new theories and testing techniques have permitted the analysis of several traditional problems from a new perspect

Download or read book Numerical Modelling of Construction Processes in Geotechnical Engineering for Urban Environment written by Theodoros Triantafyllidis and published by CRC Press. This book was released on 2006-02-23 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: It has become increasingly important, particularly in an urban environment, to predict soil behaviour and to confine the settlement or deformation of buildings adjacent to construction sites. One important factor is the choice of construction procedure for the installation of piles, sheet pile walls, anchors or for soil improvement techniques, ground freezing and tunnelling methods. The modelling of construction processes, which are frequently associated with large deformations of the soil and with strong changes in the structure of the soil around the construction plant, in the case of, for example, a drill, a bit, a vibrator, or an excavation tool, requires sophisticated and new methods in numerical modelling. Often the simulation of the construction procedure is neglected in the calculations. Such methods are described and discussed in this book, as are examples of the methods applied to geotechnical practice, field and laboratory testing as well as case studies. This volume provides a valuable source of reference for scientists in geotechnical engineering and numerical modelling, geotechnical engineers, post graduate students, construction companies and consultants, manufacturers of geotechnical construction plants and software suppliers and developers of geotechnical construction methods.

Download or read book Master s Theses Directories written by and published by . This book was released on 2004 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Education, arts and social sciences, natural and technical sciences in the United States and Canada".

Download or read book Advances in Deep Foundations written by Yoshiaki Kikuchi and published by Taylor & Francis. This book was released on 2007-06-21 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Civil Engineering has recently seen enormous progress in the core field of the construction of deep foundations. This book is the result of the International Workshop on Recent Advances in Deep Foundations (IWDPF07), which was held in Yokosuka, Japan from the 1st to the 2nd of February, 2007. Topics under discussion in this book include recent rese

Download or read book Physical Modelling in Geotechnics Volume 2 written by Andrew McNamara and published by CRC Press. This book was released on 2018-07-11 with total page 1333 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical Modelling in Geotechnics collects more than 1500 pages of peer-reviewed papers written by researchers from over 30 countries, and presented at the 9th International Conference on Physical Modelling in Geotechnics 2018 (City, University of London, UK 17-20 July 2018). The ICPMG series has grown such that two volumes of proceedings were required to publish all contributions. The books represent a substantial body of work in four years. Physical Modelling in Geotechnics contains 230 papers, including eight keynote and themed lectures representing the state-of-the-art in physical modelling research in aspects as diverse as fundamental modelling including sensors, imaging, modelling techniques and scaling, onshore and offshore foundations, dams and embankments, retaining walls and deep excavations, ground improvement and environmental engineering, tunnels and geohazards including significant contributions in the area of seismic engineering. ISSMGE TC104 have identified areas for special attention including education in physical modelling and the promotion of physical modelling to industry. With this in mind there is a special themed paper on education, focusing on both undergraduate and postgraduate teaching as well as practicing geotechnical engineers. Physical modelling has entered a new era with the advent of exciting work on real time interfaces between physical and numerical modelling and the growth of facilities and expertise that enable development of so called ‘megafuges’ of 1000gtonne capacity or more; capable of modelling the largest and most complex of geotechnical challenges. Physical Modelling in Geotechnics will be of interest to professionals, engineers and academics interested or involved in geotechnics, geotechnical engineering and related areas. The 9th International Conference on Physical Modelling in Geotechnics was organised by the Multi Scale Geotechnical Engineering Research Centre at City, University of London under the auspices of Technical Committee 104 of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE). City, University of London, are pleased to host the prestigious international conference for the first time having initiated and hosted the first regional conference, Eurofuge, ten years ago in 2008. Quadrennial regional conferences in both Europe and Asia are now well established events giving doctoral researchers, in particular, the opportunity to attend an international conference in this rapidly evolving specialist area. This is volume 2 of a 2-volume set.

Download or read book Stress in Subsoil and Methods of Final Settlement Calculation written by J. Feda and published by Elsevier. This book was released on 2013-10-22 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in Geotechnical Engineering, Volume 18: Stress in Subsoil and Methods of Final Settlement Calculation reviews the method of settlement calculations based on stresses in the subsoil. This book is divided into three chapters. Chapter 1 deals with in situ stresses in the subsoil, while Chapter 2 focuses on the state of stress produced in the subsoil by external loads. The last chapter discusses the methods of calculating the final settlement, including remarks on the selection of deformation parameters. This publication also discusses the horizontal geostatic stress, surface loading of a half-space, method of oedometric compression, and finite element and allied methods. This volume is recommended for researchers and specialists of disciplines related to geotechnical engineering.

Download or read book Centrifuge Modelling of a Rigid Footing on Jointed Rock written by Lee Edward Dunham and published by . This book was released on 1998 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Landslide Hazards in Alpine Region Mechanics and Mitigation written by Yun Zheng and published by Frontiers Media SA. This book was released on 2022-11-01 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Transactions of the American Society of Civil Engineers written by American Society of Civil Engineers and published by . This book was released on 2006 with total page 1264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vols. 29-30 contain papers of the International Engineering Congress, Chicago, 1893; v. 54, pts. A-F, papers of the International Engineering Congress, St. Louis, 1904.

Download or read book Soil Mechanics for Unsaturated Soils written by Delwyn G. Fredlund and published by John Wiley & Sons. This book was released on 1993-09-06 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: The principles and concepts for unsaturated soils are developed as extensions of saturated soils. Addresses problems where soils have a matric suction or where pore-water pressure is negative. Covers theory, measurement and use of the fundamental properties of unsaturated soils--permeability, shear strength and volume change. Includes a significant amount of case studies.

Download or read book Geotechnical Modelling written by David Muir Wood and published by CRC Press. This book was released on 2017-12-21 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modelling forms an implicit part of all engineering design but many engineers engage in modelling without consciously considering the nature, validity and consequences of the supporting assumptions. Derived from courses given to postgraduate and final year undergraduate MEng students, this book presents some of the models that form a part of the typical undergraduate geotechnical curriculum and describes some of the aspects of soil behaviour which contribute to the challenge of geotechnical modelling. Assuming a familiarity with basic soil mechanics and traditional methods of geotechnical design, this book is a valuable tool for students of geotechnical and structural and civil engineering as well as also being useful to practising engineers involved in the specification of numerical or physical geotechnical modelling.

Download or read book Foundation Design Principles and Practices written by Donald P. Coduto and published by Pearson Higher Ed. This book was released on 2013-10-03 with total page 889 pages. Available in PDF, EPUB and Kindle. Book excerpt: For undergraduate/graduate-level foundation engineering courses. Covers the subject matter thoroughly and systematically, while being easy to read. Emphasizes a thorough understanding of concepts and terms before proceeding with analysis and design, and carefully integrates the principles of foundation engineering with their application to practical design problems.

Download or read book Geotechnical abstracts written by and published by . This book was released on 1984 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Linear and Non linear Numerical Analysis of Foundations written by John W. Bull and published by CRC Press. This book was released on 2009-02-02 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Correctly understanding, designing and analyzing the foundations that support structures is fundamental to their safety. This book by a range of academic, design and contracting world experts provides a review of the state-of-the-art techniques for modelling foundations using both linear and non linear numerical analysis. It applies to a range of infrastructure, civil engineering and structural engineering projects and allows designers, engineers, architects, researchers and clients to understand some of the advanced numerical techniques used in the analysis and design of foundations. Topics include: Ground vibrations caused by trains Pile-group effects Bearing capacity of shallow foundations under static and seismic conditions Bucket foundation technology for offshore oilfields Seismically induced liquefaction in earth embankment foundations and in pile foundations Free vibrations of industrial chimneys and TV towers with flexibility of the soil Settlements of high rise structures Seepage, stress fields and dynamic responses in dams Site investigation