Download or read book Catalytic Air Pollution Control written by Ronald M. Heck and published by John Wiley & Sons. This book was released on 2016-03-07 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalytic Air Pollution Control: Commercial Technology is the primary source for commercial catalytic air pollution control technology, offering engineers a comprehensive account of all modern catalytic technology. This Third Edition covers all the new advances in technology in automotive catalyst control technology, diesel engine catalyst control technology, small engine catalyst control technology, and alternate sustainable fuels for auto and diesel.
Download or read book Catalyst and Emission Technology written by and published by SAE International. This book was released on 1993-01-01 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Automobile Catalytic Converters written by Kathleen C. Taylor and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 61 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of catalytic converters for the purification of automotive exhaust gases is a relatively new technology which was brought into existence by social pressures for the preservation of acceptable environmental conditions. The majority of catalytic practitioners have been able to watch the growth of this technology from its inception to its current state of sophistication. Automotive catalytic converter technology is now in a mature state, and this chapter from Vol. 5 Catalysis: Science and Technology by Dr. K. C. Taylor provides a review which covers both the process chemistry and the most important converter design factors. Contents 1. Introduction. . . . . . . . . . . . . . 2. Emission Regulations in the United States. 3. Exhaust Emission Characteristics. . 3 4. 1981 Emission Control Technology. 5 A. Converters. . . 5 B. Control System. 7 8 ~. Catalyst Screening . 6. Laboratory Testing. .10 7. The Chemical Reactions 13 8. Composition of Three-Way Catalysts. 16 A. Rhodium 17 21 B. Platinum. C. Palladium 22 D. Iridium . 22 23 E. Ruthenium and Nickel. F. Cerium Oxide ..... 23 G. Search for Alternatives to Nohle Metals 24 9. Catalyst Supports . 25 A. Pellets .... 26 B. Monoliths . . 26 10. The Transient Behavior of Three-Way Catalysts 27 II. Deterioration of Three-Way Catalysts. 35 A. Thermal Effects. . . . 35 B. Phosphorus Poisoning. . . 37 C. Lead Poisoning. . . . . . · 38 D. Catalyst Poisoning by Sulfur · 40 12. The 0.4 NO,; Research Objective. · 41 13. Control of Diesel Particulate Emissions.
Download or read book NOx Emission Control Technologies in Stationary and Automotive Internal Combustion Engines written by B. Ashok and published by Elsevier. This book was released on 2021-11-09 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: NOx Emission Control Technologies in Stationary and Automotive Internal Combustion Engines: Approaches Toward NOx Free Automobiles presents the fundamental theory of emission formation, particularly the oxides of nitrogen (NOx) and its chemical reactions and control techniques. The book provides a simplified framework for technical literature on NOx reduction strategies in IC engines, highlighting thermodynamics, combustion science, automotive emissions and environmental pollution control. Sections cover the toxicity and roots of emissions for both SI and CI engines and the formation of various emissions such as CO, SO2, HC, NOx, soot, and PM from internal combustion engines, along with various methods of NOx formation. Topics cover the combustion process, engine design parameters, and the application of exhaust gas recirculation for NOx reduction, making this book ideal for researchers and students in automotive, mechanical, mechatronics and chemical engineering students working in the field of emission control techniques. Covers advanced and recent technologies and emerging new trends in NOx reduction for emission control Highlights the effects of exhaust gas recirculation (EGR) on engine performance parameters Discusses emission norms such as EURO VI and Bharat stage VI in reducing global air pollution due to engine emissions
Download or read book Cleaner Cars written by J Robert Mondt and published by SAE International. This book was released on 2000-01-28 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book chronicles a 35-year success story - the technology that was developed and the progress that was made to achieve the goal of reducing air pollution from automobiles. "Air pollution from automobiles as of the year 2000 will have been lowered to levels less than 5% of those for pre-control era vehicles," writes author J. Robert Mondt, who spent over 30 years working on the development of emission control systems for automobiles. Mondt covers both the technological and political aspects of this effort, from the early environmental concerns in California to the Clean Air Acts of the 1960s to the introduction of catalytic converters in 1975. He also covers the revised Clean Air Acts of the 1960s to the introduction of catalytic converters in 1975.
Download or read book Methods for Monitoring and Diagnosing the Efficiency of Catalytic Converters written by M. Sideris and published by Elsevier. This book was released on 1998-06-19 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: The dramatic evolution of catalytic converters in the last thirty years was a result of a need worldwide to reduce pollution created by the exhaust gases of internal combustion engines. Environmental concerns have led American, Japanese and European Union (EU) legislation to pose continuously stricter emission limits for petrol engines in the last decades. The catalytic converter has become the most important means of exhaust treatment to achieve the desired emission limits. The international legislation has also created a need for a regular assessment of the efficiency of the catalytic converter in order to detect a deterioration of its conversion efficiency as soon as this deterioration takes place. The assessment of conversion efficiency of a catalytic converter can take place during normal driving of a vehicle (on-board diagnosis or OBD) or in a workshop by specialized technicians. The most important methods nowadays are the OBD methods. The evolution of methods concerned with OBD and non-OBD monitoring and diagnosing of efficiency of catalytic converters of internal combustion engines is described based on patents and published patent applications. Non-patent references are also used. The basic principles of modern catalytic converters are described in an extensive Introduction, where the importance of monitoring and diagnosing the efficiency of catalytic converters is demonstrated. The book is divided into four parts. The first part describes methods involving the use of oxygen or air/fuel exhaust gas sensors to determine the oxygen storage capacity of a catalytic converter. The second part describes methods involving the use of temperature sensors to determine the exothermic reaction capacity of a catalytic converter. The third part describes all other methods existing in patent literature that monitor and diagnose the efficiency of catalytic converters. The great majority of the methods of the third part involves exhaust gas concentration measurements. The fourth part comprises a general discussion of all methods described. In the beginning of each part, a short introduction is given to explain the problem that the methods attempt to solve. The methods in each part are presented in chronological order per patent applicant. This helps to evaluate how the patent applicant has improved his methods over time. A patent number index with information about the patent applicants, inventors, priorities and patent-families, an inventor index, a company index and a subject index can be found at the end of the book.
Download or read book Emissions Technologies written by and published by . This book was released on 2004 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Catalysis Looks to the Future written by National Research Council and published by National Academies Press. This book was released on 1992-02-01 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: The impact of catalysis on the nation's economy is evidenced by the fact that catalytic technologies generate U.S. sales in excess of $400 billion per year and a net positive balance of trade of $16 billion annually. This book outlines recent accomplishments in the science and technology of catalysis and summarizes important likely challenges and opportunities on the near horizon. It also presents recommendations for investment of financial and human resources by industry, academe, national laboratories, and relevant federal agencies if the nation is to maintain continuing leadership in this fieldâ€"one that is critical to the chemical and petroleum processing industries, essential for energy-efficient means for environmental protection, and vital for the production of a broad range of pharmaceuticals.
Download or read book Selective Catalytic Reduction Technology for the Control of Nitrogen Oxide Emissions from Coal Fired Boilers written by Gene Knight and published by DIANE Publishing. This book was released on 2008-08 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Clean Coal Technology Demo. Program (CCTDP) is an effort to demonstrate a new generation of innovative coal utilization processes in a series of facilities built across the country. These projects are carried out on a commercial scale to prove technical feasibility and provide the info. required for future applications. Projects have demonstrated technical options with the potential to meet the needs of energy markets while satisfying environ. requirements. Part of this program is the demo. of technologies designed to reduce emissions of oxides of nitrogen (NOx) from existing coal-fired utility boilers. This report summarizes the status of selective catalytic reduction (SCR) technology for the control of NOx emissions from high-sulfur, coal-fired boilers. Illus.
Download or read book Advanced Catalytic Converters and Substrates for Gasoline Emission Systems written by and published by . This book was released on 2001 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of papers from the 2001 SAE World Congress, held March 5-8 in Detroit, Michigan. Paper topics include: a comparison of conversion efficiency and flow restriction performance of ceramic and metallic catalyst substrates; application of advanced three-way catalyst technologies on high cell density ultra thin-wall ceramic substrates for future emission legislations; prediction of catalytic performance during light-off phase with different wall thickness, cell density and cell shape; modeling the effect of substrate cell shape on conversion in monolith catalysts; shear strength of cordierite ceramic catalyst supports; suppression of sulfide emission during lean NOx trap desulfation; a non-noble metal based catalytic converter for two-stroke, two-wheeler applications; and an intelligent catalyst.
Download or read book Handbook of Climate Change Mitigation written by Wei-Yin Chen and published by Springer. This book was released on 2012-02-13 with total page 2130 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a mounting consensus that human behavior is changing the global climate and its consequence could be catastrophic. Reducing the 24 billion metric tons of carbon dioxide emissions from stationary and mobile sources is a gigantic task involving both technological challenges and monumental financial and societal costs. The pursuit of sustainable energy resources, environment, and economy has become a complex issue of global scale that affects the daily life of every citizen of the world. The present mitigation activities range from energy conservation, carbon-neutral energy conversions, carbon advanced combustion process that produce no greenhouse gases and that enable carbon capture and sequestion, to other advanced technologies. From its causes and impacts to its solutions, the issues surrounding climate change involve multidisciplinary science and technology. This handbook will provide a single source of this information. The book will be divided into the following sections: Scientific Evidence of Climate Change and Societal Issues, Impacts of Climate Change, Energy Conservation, Alternative Energies, Advanced Combustion, Advanced Technologies, and Education and Outreach.
Download or read book Engine Emissions written by B. P. Pundir and published by Alpha Science International, Limited. This book was released on 2007 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Engine Emissions: Pollutant Formation and Advances in Control Technology provides an up to date reference to academics and professionals on emissions from SI and CI engine powered vehicles. - In this text, mechanism of formation of engine emissions, effect of engine design and operation variables, world wide vehicle emission standards and emission measurement and test procedures are presented. Advances in emission control technology that have taken place from those used initially and up to the ones employed on the present day vehicles meeting the stringent emission regulations e.g., Euro 4, ULEV, SULEV standards are discussed. - Newer developments on exhaust aftertreatment such as HC adsorber systems, NO, traps and other de-NO, catalysts, and advanced engines like GDI and HCCI engines are covered in the book."--Jacket.
Download or read book Automotive Emissions Regulations and Exhaust Aftertreatment Systems written by John Kasab and published by SAE International. This book was released on 2020-08-31 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to present a fundamental development of the science and engineering underlying the design of exhaust aftertreatment systems for automotive internal combustion engines. No pre-requisite knowledge of the field is required: our objective is to acquaint the reader, whom we expect to be new to the field of emissions control, with the underlying principles, control methods, common problems, and fuel effects on catalytic exhaust aftertreatment devices. We do this in hope that they can better understand the previous and current generations of emissions control, and improve upon them. This book is designed for the engineer, researcher, designer, student, or any combination of those, who is concerned with the control of automotive exhaust emissions. It includes discussion of theory and fundamentals applicable to hardware development.
Download or read book Engineering Solutions for CO2 Conversion written by Tomas Ramirez Reina and published by John Wiley & Sons. This book was released on 2021-07-19 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide that offers a review of the current technologies that tackle CO2 emissions The race to reduce CO2 emissions continues to be an urgent global challenge. "Engineering Solutions for CO2 Conversion" offers a thorough guide to the most current technologies designed to mitigate CO2 emissions ranging from CO2 capture to CO2 utilization approaches. With contributions from an international panel representing a wide range of expertise, this book contains a multidisciplinary toolkit that covers the myriad aspects of CO2 conversion strategies. Comprehensive in scope, it explores the chemical, physical, engineering and economical facets of CO2 conversion. "Engineering Solutions for CO2 Conversion" explores a broad range of topics including linking CFD and process simulations, membranes technologies for efficient CO2 capture-conversion, biogas sweetening technologies, plasma-assisted conversion of CO2, and much more. This important resource: * Addresses a pressing concern of global environmental damage, caused by the greenhouse gases emissions from fossil fuels * Contains a review of the most current developments on the various aspects of CO2 capture and utilization strategies * Incldues information on chemical, physical, engineering and economical facets of CO2 capture and utilization * Offers in-depth insight into materials design, processing characterization, and computer modeling with respect to CO2 capture and conversion Written for catalytic chemists, electrochemists, process engineers, chemical engineers, chemists in industry, photochemists, environmental chemists, theoretical chemists, environmental officers, "Engineering Solutions for CO2 Conversion" provides the most current and expert information on the many aspects and challenges of CO2 conversion.
Download or read book New Technologies for Emission Control in Marine Diesel Engines written by Masaaki Okubo and published by Butterworth-Heinemann. This book was released on 2019-08-29 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: New Technologies for Emission Control in Marine Diesel Engines provides a unique overview on marine diesel engines and aftertreatment technologies that is based on the authors' extensive experience in research and development of emission control systems, especially plasma aftertreatment systems. The book covers new and updated technologies, such as combustion improvement and after treatment, SCR, the NOx reduction method, Ox scrubber, DPF, Electrostatic precipitator, Plasma PM decomposition, Plasma NOx reduction, and the Exhaust gas recirculation method. This comprehensive resource is ideal for marine engineers, engine manufacturers and consultants dealing with the development and implementation of aftertreatment systems in marine engines. - Includes recent advances and future trends of marine engines - Discusses new and innovative emission technologies for marine diesel engines and their regulations - Covers aftertreatment technologies that are not widely applied, such as catalysts, SCR, DPF and plasmas
Download or read book NOx Trap Catalysts and Technologies written by Luca Lietti and published by Royal Society of Chemistry. This book was released on 2018-06-13 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vehicle exhaust emissions, particularly from diesel cars, are considered to be a significant problem for the environment and human health. Lean NOx Trap (LNT) or NOx Storage/Reduction (NSR) technology is one of the current techniques used in the abatement of NOx from lean exhausts. Researchers are constantly searching for new inexpensive catalysts with high efficiency at low temperatures and negligible fuel penalties, to meet the challenges of this field. This book will be the first to comprehensively present the current research on this important area. Covering the technology used, from its development in the early 1990s up to the current state-of-the-art technologies and new legislation. Beginning with the fundamental aspects of the process, the discussion will cover the real application standard through to the detailed modelling of full scale catalysts. Scientists, academic and industrial researchers, engineers working in the automotive sector and technicians working on emission control will find this book an invaluable resource.
Download or read book Automobile Emission Control the Technical Status and Outlook as of December 1974 written by United States. Environmental Protection Agency. Office of Mobile Source Air Pollution Control. Emission Control Technology Division and published by . This book was released on 1975 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:
