Download or read book Characterization of Solid Materials and Heterogeneous Catalysts written by Michel Che and published by John Wiley & Sons. This book was released on 2012-04-16 with total page 1313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume book provides an overview of physical techniques used to characterize the structure of solid materials, on the one hand, and to investigate the reactivity of their surface, on the other. Therefore this book is a must-have for anyone working in fields related to surface reactivity. Among the latter, and because of its most important industrial impact, catalysis has been used as the directing thread of the book. After the preface and a general introduction to physical techniques by M. Che and J.C. Vedrine, two overviews on physical techniques are presented by G. Ertl and Sir J.M. Thomas for investigating model catalysts and porous catalysts, respectively. The book is organized into four parts: Molecular/Local Spectroscopies, Macroscopic Techniques, Characterization of the Fluid Phase (Gas and/ or Liquid), and Advanced Characterization. Each chapter focuses upon the following important themes: overview of the technique, most important parameters to interpret the experimental data, practical details, applications of the technique, particularly during chemical processes, with its advantages and disadvantages, conclusions.
Download or read book Catalyst Characterization written by Boris Imelik and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: to the Fundamental and Applied Catalysis Series Catalysis is important academically and industrially. It plays an essential role in the manufacture of a wide range of products, from gasoline and plastics to fertilizers and herbicides, which would otherwise be unobtainable or prohibitive ly expensive. There are few chemical-or oil-based material items in modern society that do not depend in some way on a catalytic stage in their manufacture. Apart from manufacturing processes, catalysis is finding other important and over-increasing uses; for example, successful applications of catalysis in the control ofpollution and its use in environmental control are certain to in crease in the future. The commercial import an ce of catalysis and the diverse intellectual challenges of catalytic phenomena have stimulated study by a broad spectrum of scientists including chemists, physicists, chemical engineers, and material scientists. Increasing research activity over the years has brought deeper levels of understanding, and these have been associated with a continually growing amount of published material. As recentlyas sixty years ago, Rideal and Taylor could still treat the subject comprehensively in a single volume, but by the 19 50s Emmett required six volumes, and no conventional multivolume text could now cover the whole of catalysis in any depth.
Download or read book Current Trends of Surface Science and Catalysis written by Jeong Young Park and published by Springer Science & Business Media. This book was released on 2013-10-23 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book covers the latest surface science studies on model catalysts, including single crystals, non-colloidal nanocatalysts, and nanoparticles in various forms with the control of size, shape and composition. This book addresses the issue of bridging “materials and pressure gaps” and also discusses the important issue of metal-oxide interface and hot electron flows in heterogeneous catalysis. The current development of in-situ surface techniques that is relevant to bridging “pressure gaps” is also highlighted.
Download or read book Surface Analysis Methods in Materials Science written by John O'Connor and published by Springer Science & Business Media. This book was released on 2003-04-23 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide to the use of surface analysis techniques, now in its second edition, has expanded to include more techniques, current applications and updated references. It outlines the application of surface analysis techniques to a broad range of studies in materials science and engineering. The book consists of three parts: an extensive introduction to the concepts of surface structure and composition, a techniques section describing 19 techniques and a section on applications. This book is aimed at industrial scientists and engineers in research and development. The level and content of this book make it ideal as a course text for senior undergraduate and postgraduate students in materials science, materials engineering, physics, chemistry and metallurgy.
Download or read book Catalysis An Integrated Approach written by R.A. van Santen and published by Elsevier. This book was released on 2000-09-26 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book concentrates on industrially relevant reactions which are catalyzed by heterogeneous and homogeneous catalysts. Homogeneous catalysis by metal complexes is treated jointly with heterogeneous catalysis using metallic and non-metallic solids. In both areas the high degree of sophistication of spectroscopic techniques and theoretical modelling has led to an enormous increase in our understanding at the molecular level. This holds for the kinetics of the reactions and the reactivities of the catalysts, as well as for the syntheses of the catalytic materials. The development of catalysis science since the first edition of this book has necessitated a thorough revision, including special chapters on biocatalysis, catalyst characterization and adsorption methods. The multidisciplinary nature of catalysis is reflected in the choice of a novel combination of basic disciplines which will be refreshing and inspiring to readers.
Download or read book Catalysis and Surface Characterisation written by T. J. Dines and published by . This book was released on 1992 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains a selection of papers presented at an international conference on recent developments in heterogeneous catalysis, specifically in areas of current industrial importance. Various spectroscopic methods for surface characterization are described.
Download or read book Characterization of porous solids VI proceedings of the 6th International Symposium on the Characterization of Porous Solids COPS VI Alicante Spain May 8 11 2002 written by and published by . This book was released on 2002 with total page 789 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heterogeneous Catalysts written by Wey Yang Teoh and published by John Wiley & Sons. This book was released on 2021-02-23 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents state-of-the-art knowledge of heterogeneous catalysts including new applications in energy and environmental fields This book focuses on emerging techniques in heterogeneous catalysis, from new methodology for catalysts design and synthesis, surface studies and operando spectroscopies, ab initio techniques, to critical catalytic systems as relevant to energy and the environment. It provides the vision of addressing the foreseeable knowledge gap unfilled by classical knowledge in the field. Heterogeneous Catalysts: Advanced Design, Characterization and Applications begins with an overview on the evolution in catalysts synthesis and introduces readers to facets engineering on catalysts; electrochemical synthesis of nanostructured catalytic thin films; and bandgap engineering of semiconductor photocatalysts. Next, it examines how we are gaining a more precise understanding of catalytic events and materials under working conditions. It covers bridging pressure gap in surface catalytic studies; tomography in catalysts design; and resolving catalyst performance at nanoscale via fluorescence microscopy. Quantum approaches to predicting molecular reactions on catalytic surfaces follows that, along with chapters on Density Functional Theory in heterogeneous catalysis; first principles simulation of electrified interfaces in electrochemistry; and high-throughput computational design of novel catalytic materials. The book also discusses embracing the energy and environmental challenges of the 21st century through heterogeneous catalysis and much more. Presents recent developments in heterogeneous catalysis with emphasis on new fundamentals and emerging techniques Offers a comprehensive look at the important aspects of heterogeneous catalysis Provides an applications-oriented, bottoms-up approach to a high-interest subject that plays a vital role in industry and is widely applied in areas related to energy and environment Heterogeneous Catalysts: Advanced Design, Characterization and Applications is an important book for catalytic chemists, materials scientists, surface chemists, physical chemists, inorganic chemists, chemical engineers, and other professionals working in the chemical industry.
Download or read book Preparation of Catalysts VII written by R. Maggi and published by Elsevier. This book was released on 1998-08-17 with total page 1007 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of the VIIth International Symposium on the Scientific Bases for the Preparation of Heterogeneous Catalysts, are in line with the general scope of this series of events. Emphasis in all Symposia has been on the scientific aspects of the preparation of new and industrial catalysts, or on new methods of preparation, rather than on the catalytic reactions in which such solids are ultimately used. In the present context, the catalytic event itself has only been considered as another, though often decisive, method of catalyst characterization.
Download or read book Nanoporous Materials III written by M. Jaroniec and published by Elsevier. This book was released on 2002-05-15 with total page 711 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoporous Materials III contains the invited lectures and peer-reviewed oral and poster contributions to be presented at the 3rd Conference on Nanoporous Materials, which will be hosted in Ottawa, Canada, June 2002. The work covers complementary approaches to and recent advances in the field of nanostructured materials with pore sizes larger than 1nm, such as periodic mesoporous molecular sieves M41S and FSM16 and related materials including clays, carbon molecular sieves, colloidal crystal templated organic and inorganic materials, porous polymers and sol gels. The broad range of topics covered in relation to the synthesis and characterization of ordered mesoporous materials are of great importance for advanced adsorption, catalytic and separation processes as well as the development of nanotechnology. The contents of this title are based on topics to be discussed by invited lecturers, which deal with periodic mesoporous organosilicas, stability and catalytic activity of aluminosilicate mesostructures, electron microscopy studies of ordered materials, imprinted polymers and highly porous metal-organic frameworks. The other contributions deal with tailoring the surface and structural properties of nanoporous materials, giving a detailed characterization as well as demonstrating their usefulness for advanced adsorption and catalytic applications.
Download or read book Innovation in Zeolite Materials Science written by P.J. Grobet and published by Elsevier. This book was released on 2011-09-22 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of this zeolite scientific meeting reflect the growing drive to discover new materials. It is evident that zeolite materials science is in a post-ZSM-5 period - pushed by a massive expansion of new compositions and topologies, and the application of new scientific tools. Four new zeolite topologies were detailed at this meeting. Important new trends were the resurgence of interest in computational and theoretical approaches to explain synthesis, sorption and catalytic data, and the increasing use of NMR and high-resolution imaging.
Download or read book Catalysis by Microporous Materials written by H.K. Beyer and published by Elsevier. This book was released on 1995-05-19 with total page 811 pages. Available in PDF, EPUB and Kindle. Book excerpt: ZEOCAT '95 is the eleventh in the series of symposia devoted to special fields of zeolite chemistry. Six plenary lectures, forty oral and forty-two poster presentations were included in the program. The accepted papers cover every aspect of catalysis on microporous materials. A significant number of the contributions describe the synthesis, modification, instrumental and chemical characterisation of zeolites and other micro- and mesoporous materials. Catalytic reactions involve hydrocarbon cracking, nucleophilic aromatic substitution, methanol to hydrocarbon conversion, hydration of acetylene, various alkylation reactions, redox transformations, Claisen rearrangement, etc.
Download or read book Nanoparticle Design and Characterization for Catalytic Applications in Sustainable Chemistry written by Rafael Luque and published by Royal Society of Chemistry. This book was released on 2019-10-05 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an introduction to the preparation and characterisation of nanomaterials and their design for specific catalytic applications.
Download or read book Characterization of Solid Surfaces written by Philip F. Kane and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 675 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until comparatively recently, trace analysis techniques were in general directed toward the determination of impurities in bulk materials. Methods were developed for very high relative sensitivity, and the values determined were average values. Sampling procedures were devised which eliminated the so-called sampling error. However, in the last decade or so, a number of developments have shown that, for many purposes, the distribution of defects within a material can confer important new properties on the material. Perhaps the most striking example of this is given by semiconductors; a whole new industry has emerged in barely twenty years based entirely on the controlled distribu tion of defects within what a few years before would have been regarded as a pure, homogeneous crystal. Other examples exist in biochemistry, metallurgy, polyiners and, of course, catalysis. In addition to this of the importance of distribution, there has also been a recognition growing awareness that physical defects are as important as chemical defects. (We are, of course, using the word defect to imply some dis continuity in the material, and not in any derogatory sense. ) This broadening of the field of interest led the Materials Advisory Board( I} to recommend a new definition for the discipline, "Materials Character ization," to encompass this wider concept of the determination of the structure and composition of materials. In characterizing a material, perhaps the most important special area of interest is the surface.
Download or read book Characterization of Heterogeneous Catalysts written by Francis Delannay and published by Marcel Dekker. This book was released on 1984 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Catalysis written by B. Viswanathan and published by CRC Press. This book was released on 2002 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Students contemplating careers in chemistry, whether in research, practice, or academia, obviously need a solid grounding in proper research methodology, reasoning, and analysis. However, there are few resources available that efficiently and effectively introduce these concepts and techniques and inspire students to undertake advanced research, particularly in the area of catalysis. Catalysis: Principles and Applications evolved out of a special, resoundingly successful short course for graduate students interested in catalysis. It covers nearly the entire gamut of the subject, from its fundamentals to its modern, applied aspects. The chapters were contributed by catalysis specialists from leading academic institutions, national laboratories and industrial R&D labs. Because they are based on the authors' lecture notes, each chapter is highly accessible and for the most part self-contained. Topics include various spectroscopic methods, biocatalysis, x-ray and thermal analysis, photocatalysis, and recent developments, such as solid acid catalysts, fine chemical synthesis, and computer-aided catalyst design. The book also contains discussions on a variety of modern applications, including environmental pollution control, petroleum refining, fuel cells, and monomolecular films. Logically presented, well-illustrated, and thoroughly referenced, Catalysis: Principles and Applications offers an outstanding basis for courses in catalysis. It not only imparts the fundamentals, synthesis, characterization, and applications of catalysis, but does so in a way that will motivate students to pursue more advanced studies and ultimately careers in the field.
Download or read book Applications in Industry written by and published by Elsevier. This book was released on 1998-12-17 with total page 1091 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume I contains a brief review of adsorption history and its development for practical purposes up until now. It also presents some important information on adsorbents and catalysts as well as on the methods of their characterization. The part of this volume dealing with practical industrial applications includes chapters presenting advanced technical tools for high capacity adsorption separation of liquid and gas mixtures, development of new adsorbents for removal of hazardous contaminants from combustion flue gases and wastewaters, degasification of coal seams and fabrication of inorganic membranes and their applications. A comprehensive review is also included on contemporary utility of self-assembled monolayers, adsorption proteins and their role in modern industry, adsorption methods in technology of optical fibre glasses, sol-gel technology, solid desiccant dehumidification systems, etc. The articles give both the scientific backgrounds of the phenomena discussed and emphasize their practical aspects.The chapters give not only brief current knowledge about the studied problems, but are also a source of topical literature on the subject. A comprehensive bibliography on adsorption principles, design data and adsorbent materials for industrial applications for the period 1967-1997 concludes the book.
