Download or read book Casing Design written by and published by Elsevier Science Limited. This book was released on 1995 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hardbound. Casing design has followed an evolutionary trend and most improvements have been made due to the advancement of technology. Contributions to the technology in casing design have come from fundamental research and field tests, which have made casing safe and economical. This book gathers together much available information in the subject area and shows how it may be used in deciding the best procedure for casing design i.e. optimizing casing design for deriving maximum profit from a particular well. The problems and their solutions, which are provided in each chapter, and the computer program (3.5 in. disk) are intended to serve two purposes: - firstly, as illustrations for students and practicing engineers to understand the subject matter, and secondly, to enable them to optimize casing design for a wide range of wells to be drilled in the future

Download or read book Casing Design Theory and Practice written by S.S. Rahman and published by Elsevier. This book was released on 1995-08-01 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Casing design has followed an evolutionary trend and most improvements have been made due to the advancement of technology. Contributions to the technology in casing design have come from fundamental research and field tests, which have made casing safe and economical. This book gathers together much available information in the subject area and shows how it may be used in deciding the best procedure for casing design i.e. optimizing casing design for deriving maximum profit from a particular well. The problems and their solutions, which are provided in each chapter, and the computer program (3.5 in. disk) are intended to serve two purposes:- firstly, as illustrations for students and practicing engineers to understand the subject matter, and secondly, to enable them to optimize casing design for a wide range of wells to be drilled in the future.

Download or read book Risk Reliability and Safety Innovating Theory and Practice written by Lesley Walls and published by CRC Press. This book was released on 2016-11-25 with total page 2983 pages. Available in PDF, EPUB and Kindle. Book excerpt: Risk, Reliability and Safety contains papers describing innovations in theory and practice contributed to the scientific programme of the European Safety and Reliability conference (ESREL 2016), held at the University of Strathclyde in Glasgow, Scotland (25—29 September 2016). Authors include scientists, academics, practitioners, regulators and other key individuals with expertise and experience relevant to specific areas. Papers include domain specific applications as well as general modelling methods. Papers cover evaluation of contemporary solutions, exploration of future challenges, and exposition of concepts, methods and processes. Topics include human factors, occupational health and safety, dynamic and systems reliability modelling, maintenance optimisation, uncertainty analysis, resilience assessment, risk and crisis management.

Download or read book Elements of Oil and Gas Well Tubular Design written by P.D. Pattillo and published by Gulf Professional Publishing. This book was released on 2018-05-25 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Elements of Oil and Gas Well Tubular Design offers insight into the complexities of oil well casing and tubing design. The book's intent is to be sufficiently detailed on the tubular-oriented application of the principles of solid mechanics while at the same time providing readers with key equations pertintent to design. It addresses the fundamentals of tubular design theory, bridging the gap between theory and field operation. Filled with derivations and detailed solutions to well design examples, Elements of Oil and Gas Well Tubular Design provides the well designer with sound engineering principles applicable to today's oil and gas wells. Understand engineering mechanics for oil well casing and tubing design with emphasis on derivation, limiations, and application of fundamental equations Grasp well tubular design from one unified source with underlying concepts of stress, strain, and material constitution Quantify practice with detailed well design worked examples amenable to quality check with commercial software

Download or read book Pumping Machinery Theory and Practice written by Hassan M. Badr and published by John Wiley & Sons. This book was released on 2014-12-09 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pumping Machinery Theory and Practice comprehensively covers the theoretical foundation and applications of pumping machinery. Key features: Covers characteristics of centrifugal pumps, axial flow pumps and displacement pumps Considers pumping machinery performance and operational-type problems Covers advanced topics in pumping machinery including multiphase flow principles, and two and three-phase flow pumping systems Covers different methods of flow rate control and relevance to machine efficiency and energy consumption Covers different methods of flow rate control and relevance to machine efficiency and energy consumption

Download or read book Control Instrumentation and Mechatronics Theory and Practice written by Norhaliza Abdul Wahab and published by Springer Nature. This book was released on 2022-07-07 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceeding includes original and peer-reviewed research papers from the 3rd International Conference on Control, Instrumentation and Mechatronics Engineering (CIM2022). The conference is a virtual conference held on 2-3 March 2022. The topics covered latest work and finding in the area of Control Engineering, Mechatronics, Robotics and Automation, Artificial Intelligence, Manufacturing, Sensor, Measurement and Instrumentation. Moreover, the latest applications of instrumentations, control and mechatronics are provided. Therefore, this proceeding is a valuable material for researchers, academicians, university students and engineers.

Download or read book Applied Well Cementing Engineering written by Gefei Liu and published by Gulf Professional Publishing. This book was released on 2021-03-25 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Well Cementing Engineering delivers the latest technologies, case studies, and procedures to identify the challenges, understand the framework, and implement the solutions for today’s cementing and petroleum engineers. Covering the basics and advances, this contributed reference gives the complete design, flow and job execution in a structured process. Authors, collectively, bring together knowledge from over 250 years of experience in cementing and condense their knowledge into this book. Real-life successful and unsuccessful case studies are included to explain lessons learned about the technologies used today. Other topics include job simulation, displacement efficiency, and hydraulics. A practical guide for cementing engineer, Applied Well Cementing Engineering, gives a critical reference for better job execution. Provides a practical guide and industry best practices for both new and seasoned engineers Independent chapters enable the readers to quickly access specific subjects Gain a complete framework of a cementing job with a detailed road map from casing equipment to plug and abandonment

Download or read book The Practice of Reservoir Engineering Revised Edition written by L.P. Dake and published by Elsevier. This book was released on 2001-05-10 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised edition of the bestselling Practice of Reservoir Engineering has been written for those in the oil industry requiring a working knowledge of how the complex subject of hydrocarbon reservoir engineering can be applied in the field in a practical manner. Containing additions and corrections to the first edition, the book is a simple statement of how to do the job and is particularly suitable for reservoir/production engineers as well as those associated with hydrocarbon recovery. This practical book approaches the basic limitations of reservoir engineering with the basic tenet of science: Occam's Razor, which applies to reservoir engineering to a greater extent than for most physical sciences - if there are two ways to account for a physical phenomenon, it is the simpler that is the more useful. Therefore, simplicity is the theme of this volume.Reservoir and production engineers, geoscientists, petrophysicists, and those involved in the management of oil and gas fields will want this edition.

Download or read book Sustainable Natural Gas Drilling written by David Wood and published by Elsevier. This book was released on 2024-03-15 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Natural Gas Drilling, the latest release in The Fundamentals and Sustainable Advances in Natural Gas Science and Engineering series, delivers many of the technical fundamentals needed in the natural gas industry with an additional sustainability lens. Introductory topics include underbalanced technologies, well integrity, and well trajectory. Advanced applications include utilizing nanoparticles to reduce environmental impact, and techniques to drill for underground gas storage and carbon capture operations. Supported by corporate and academic contributors along with two well-distinguished editors, Sustainable Natural Gas Drilling provides today’s natural gas engineers the knowledge to adjust current drilling practices in a more environmentally sustainable way. Accelerate emissions with case studies and visuals to illustrate how new principles can be applied in practical situations Understand innovative advances that are leading to improved environmental performance Bridge from theory to application with worldwide contributors representing academia and industry

Download or read book Case Studies and Theory Development in the Social Sciences written by Alexander L. George and published by MIT Press. This book was released on 2005-04-15 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of case studies to build and test theories in political science and the other social sciences has increased in recent years. Many scholars have argued that the social sciences rely too heavily on quantitative research and formal models and have attempted to develop and refine rigorous methods for using case studies. This text presents a comprehensive analysis of research methods using case studies and examines the place of case studies in social science methodology. It argues that case studies, statistical methods, and formal models are complementary rather than competitive. The book explains how to design case study research that will produce results useful to policymakers and emphasizes the importance of developing policy-relevant theories. It offers three major contributions to case study methodology: an emphasis on the importance of within-case analysis, a detailed discussion of process tracing, and development of the concept of typological theories. Case Studies and Theory Development in the Social Sciences will be particularly useful to graduate students and scholars in social science methodology and the philosophy of science, as well as to those designing new research projects, and will contribute greatly to the broader debate about scientific methods.

Download or read book Well Completion Design written by Jonathan Bellarby and published by Elsevier. This book was released on 2009-04-13 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completions are the conduit between hydrocarbon reservoirs and surface facilities. They are a fundamental part of any hydrocarbon field development project. The have to be designed for safely maximising the hydrocarbon recovery from the well and may have to last for many years under ever changing conditions. Issues include: connection with the reservoir rock, avoiding sand production, selecting the correct interval, pumps and other forms of artificial lift, safety and integrity, equipment selection and installation and future well interventions. Course book based on course well completion design by TRACS International Unique in its field: Coverage of offshore, subsea, and landbased completions in all of the major hydrocarbon basins of the world Full colour

Download or read book Foundation Design Principles and Practices written by Donald P. Coduto and published by Pearson Higher Ed. This book was released on 2013-10-03 with total page 889 pages. Available in PDF, EPUB and Kindle. Book excerpt: For undergraduate/graduate-level foundation engineering courses. Covers the subject matter thoroughly and systematically, while being easy to read. Emphasizes a thorough understanding of concepts and terms before proceeding with analysis and design, and carefully integrates the principles of foundation engineering with their application to practical design problems.

Download or read book Chemical Engineering Design written by Gavin Towler and published by Elsevier. This book was released on 2012-01-25 with total page 1321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Design, Second Edition, deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, this edition has been specifically developed for the U.S. market. It provides the latest US codes and standards, including API, ASME and ISA design codes and ANSI standards. It contains new discussions of conceptual plant design, flowsheet development, and revamp design; extended coverage of capital cost estimation, process costing, and economics; and new chapters on equipment selection, reactor design, and solids handling processes. A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data, and Excel spreadsheet calculations, plus over 150 Patent References for downloading from the companion website. Extensive instructor resources, including 1170 lecture slides and a fully worked solutions manual are available to adopting instructors. This text is designed for chemical and biochemical engineering students (senior undergraduate year, plus appropriate for capstone design courses where taken, plus graduates) and lecturers/tutors, and professionals in industry (chemical process, biochemical, pharmaceutical, petrochemical sectors). New to this edition: Revised organization into Part I: Process Design, and Part II: Plant Design. The broad themes of Part I are flowsheet development, economic analysis, safety and environmental impact and optimization. Part II contains chapters on equipment design and selection that can be used as supplements to a lecture course or as essential references for students or practicing engineers working on design projects. New discussion of conceptual plant design, flowsheet development and revamp design Significantly increased coverage of capital cost estimation, process costing and economics New chapters on equipment selection, reactor design and solids handling processes New sections on fermentation, adsorption, membrane separations, ion exchange and chromatography Increased coverage of batch processing, food, pharmaceutical and biological processes All equipment chapters in Part II revised and updated with current information Updated throughout for latest US codes and standards, including API, ASME and ISA design codes and ANSI standards Additional worked examples and homework problems The most complete and up to date coverage of equipment selection 108 realistic commercial design projects from diverse industries A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data and Excel spreadsheet calculations plus over 150 Patent References, for downloading from the companion website Extensive instructor resources: 1170 lecture slides plus fully worked solutions manual available to adopting instructors

Download or read book Multiphase Flow Metering written by Gioia Falcone and published by Elsevier. This book was released on 2009-11-16 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last two decades the development, evaluation and use of MFM systems has been a major focus for the Oil & Gas industry worldwide. Since the early 1990's, when the first commercial meters started to appear, there have been around 2,000 field applications of MFM for field allocation, production optimisation and well testing. So far, many alternative metering systems have been developed, but none of them can be referred to as generally applicable or universally accurate. Both established and novel technologies suitable to measure the flow rates of gas, oil and water in a three-phase flow are reviewed and assessed within this book. Those technologies already implemented in the various commercial meters are evaluated in terms of operational and economical advantages or shortcomings from an operator point of view. The lessons learned about the practical reliability, accuracy and use of the available technology is discussed. The book suggests where the research to develop the next generation of MFM devices will be focused in order to meet the as yet unsolved problems. The book provides a critical and independent review of the current status and future trends of MFM, supported by the authors’ strong background on multiphase flow and by practical examples. These are based on the authors’ direct experience on MFM, gained over many years of research in connection with both operators and service companies. As there are currently no books on the subject of Multiphase Flow Metering for the Oil & Gas industry, this book will fill in the gap and provide a theoretical and practical reference for professionals, academics, and students. * Written by leading scholars and industry experts of international standing* Includes strong coverage of the theoretical background, yet also provides practical examples and current developments* Provides practical reference for professionals, students and academics

Download or read book Petrophysics written by Erle C. Donaldson and published by Elsevier. This book was released on 2004-01-24 with total page 916 pages. Available in PDF, EPUB and Kindle. Book excerpt: The petroleum geologist and engineer must have a working knowledge of petrophysics in order to find oil reservoirs, devise the best plan for getting it out of the ground, then start drilling. This book offers the engineer and geologist a manual to accomplish these goals, providing much-needed calculations and formulas on fluid flow, rock properties, and many other topics that are encountered every day. New updated material covers topics that have emerged in the petrochemical industry since 1997. Contains information and calculations that the engineer or geologist must use in daily activities to find oil and devise a plan to get it out of the ground Filled with problems and solutions, perfect for use in undergraduate, graduate, or professional courses Covers real-life problems and cases for the practicing engineer

Download or read book Macondo Well Deepwater Horizon Blowout written by National Research Council and published by National Academies Press. This book was released on 2012-03-02 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: The blowout of the Macondo well on April 20, 2010, led to enormous consequences for the individuals involved in the drilling operations, and for their families. Eleven workers on the Deepwater Horizon drilling rig lost their lives and 16 others were seriously injured. There were also enormous consequences for the companies involved in the drilling operations, to the Gulf of Mexico environment, and to the economy of the region and beyond. The flow continued for nearly 3 months before the well could be completely killed, during which time, nearly 5 million barrels of oil spilled into the gulf. Macondo Well-Deepwater Horizon Blowout examines the causes of the blowout and provides a series of recommendations, for both the oil and gas industry and government regulators, intended to reduce the likelihood and impact of any future losses of well control during offshore drilling. According to this report, companies involved in offshore drilling should take a "system safety" approach to anticipating and managing possible dangers at every level of operation-from ensuring the integrity of wells to designing blowout preventers that function under all foreseeable conditions-in order to reduce the risk of another accident as catastrophic as the Deepwater Horizon explosion and oil spill. In addition, an enhanced regulatory approach should combine strong industry safety goals with mandatory oversight at critical points during drilling operations. Macondo Well-Deepwater Horizon Blowout discusses ultimate responsibility and accountability for well integrity and safety of offshore equipment, formal system safety education and training of personnel engaged in offshore drilling, and guidelines that should be established so that well designs incorporate protection against the various credible risks associated with the drilling and abandonment process. This book will be of interest to professionals in the oil and gas industry, government decision makers, environmental advocacy groups, and others who seek an understanding of the processes involved in order to ensure safety in undertakings of this nature.

Download or read book Energy Potential of the Russian Arctic Seas written by Alekseĭ Lazarevich Piskarev and published by Elsevier. This book was released on 2012-06-14 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: The structure of sedimentary basins of the Russian Arctic Seas is studied and illustrated by a number of maps, cross-sections and geophysical models. The calculated density models of the Earth crust illustrate the deep structure of the main blocks of the crust. Five major gas-condensate and gas fields are discovered here: three (Shtokman, Ludlov, Ledovoe) in the Barents and two (Leningrad and Rusanov) in the Kara Sea. Geological and geophysical characteristics of the Russian Arctic Sea sedimentary basins allow an estimation of their hydrocarbon potential by comparison with the known world analogues. Total potential resources of giant deposits of hydrocarbons in Russian Arctic Seas are estimated at 470 billion barrels of oil equivalent. The richest resources are the Kara Sea and Laptev Sea. Less rich is Barents Sea. The relatively smaller contribution to the overall estimation of the resources makes the resources of East-Siberian Sea and Chukchi Sea. Development the energy capacity of the continental shelf of Russia can play a stabilizing role in the dynamics of oil and gas production in the period 2010-2020. A key role in developing the capacity of the Arctic shelf oil and gas play is the innovative technology in exploration, production and management of the relevant investment projects. World offshore experience indicates that the combination of these factors is achieved through the formation of international firms and organizations. Comprehensively assesses the potential oil and gas resources in sedimentary basins within the Russian sector of the Arctic Ocean Describes the economic and legal challenges to the development of offshore fields in Russia Explores possible ways and timing to maKe these hydrocarbon resources available to the global market