Download or read book Corrosion Problems and Solutions in Oil Refining and Petrochemical Industry written by Alec Groysman and published by Springer. This book was released on 2016-10-24 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses corrosion problems and their solutions at facilities in the oil refining and petrochemical industry, including cooling water and boiler feed water units. Further, it describes and analyzes corrosion control actions, corrosion monitoring, and corrosion management. Corrosion problems are a perennial issue in the oil refining and petrochemical industry, as they lead to a deterioration of the functional properties of metallic equipment and harm the environment – both of which need to be protected for the sake of current and future generations. Accordingly, this book examines and analyzes typical and atypical corrosion failure cases and their prevention at refineries and petrochemical facilities, including problems with: pipelines, tanks, furnaces, distillation columns, absorbers, heat exchangers, and pumps. In addition, it describes naphthenic acid corrosion, stress corrosion cracking, hydrogen damages, sulfidic corrosion, microbiologically induced corrosion, erosion-corrosion, and corrosion fatigue occurring at refinery units. At last, fouling, corrosion and cleaning are discussed in this book.

Download or read book Energy Efficient Solvents for CO2 Capture by Gas Liquid Absorption written by Wojciech M. Budzianowski and published by Springer. This book was released on 2016-12-01 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews and characterises promising single-compound solvents, solvent blends and advanced solvent systems suitable for CO2 capture applications using gas-liquid absorption. Focusing on energy efficient solvents with minimal adverse environmental impact, the contributions included analyse the major technological advantages, as well as research and development challenges of promising solvents and solvent systems in various sustainable CO2 capture applications. It provides a valuable source of information for undergraduate and postgraduate students, as well as for chemical engineers and energy specialists.

Download or read book Copper and Bronze in Art written by David A. Scott and published by Getty Publications. This book was released on 2002 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a review of 190 years of literature on copper and its alloys. It integrates information on pigments, corrosion and minerals, and discusses environmental conditions, conservation methods, ancient and historical technologies.

Download or read book Exergetic Energetic and Environmental Dimensions written by Ibrahim Dincer and published by Academic Press. This book was released on 2017-10-06 with total page 1136 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited book looks at recent studies on interdisciplinary research related to exergy, energy, and the environment. This topic is of prime significance – there is a strong need for practical solutions through better design, analysis and assessment in order to achieve better efficiency, environment and sustainability. Exergetic, Energetic and Environmental Dimensions covers a number of topics ranging from thermodynamic optimization of energy systems, to the environmental impact assessment and clean energy, offering readers a comprehensive reference on analysis, modeling, development, experimental investigation, and improvement of many micro to macro systems and applications, ranging from basic to advanced categories. Its comprehensive content includes: - Comprehensive coverage of development of systems considering exergy, energy, and environmental issues, along with the most up-to-date information in the area, plus recent developments - New developments in the area of exergy, including recent debate involving the shaping of future directions and priorities for better environment, sustainable development and energy security - Provides a number of illustrative examples, practical applications, and case studies - Introduces recently developed technological and strategic solutions and engineering applications for professionals in the area - Provides numerous engineering examples and applications on exergy - Offers a variety of problems that foster critical thinking and skill development

Download or read book Corrosion Inhibitors for Steel in Concrete written by Bernhard Elsener and published by CRC Press. This book was released on 2001 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of inhibitors for rehabilitation of reinforced concrete structures is a new field of application and this new volume provides a State of the Art Report on this subject. Corrosion of steel in concrete is one of the major problems for infrastructure such as bridges, tunnels, housing etc. since it leads to spalling of the concrete and loss in cross section of the steel that may cause structural and safety problems. The steel in concrete generally resists corrosion as a result of a passive layer that develops on the metal surface in the alkaline environment of the concrete. Corrosion can occur if these conditions are disturbed, for example, in the presence of chlorides or with carbonation of concrete. Traditional repair methods consist in removing the deteriorated concrete and replacing it but these can be laborious, noisy and very costly. To avoid these disadvantages new methods have been developed in recent years. These include electrochemical procedures and, increasingly, the use of inhibitors. The use of inhibitors for rehabilitation of reinforced concrete structures is a new field of application and this new volume provides a State of the Art Report on this subject.The report, under the editorship of Prof. Bernhard Elsener, was prepared by a Task Group of the EFC Working Party on Corrosion of Reinforcement in Concrete. In a literature review it describes inorganic and organic chemicals that have been proposed and examined as well as the commercial corrosion inhibitors that are available on the market. Protection mechanism and possible effects of inhibitors on concrete properties are described. Practical experience with inhibitors for steel in concrete and the long term effectiveness are considered. The various test methods for evaluating the behaviour of the inhibitors are described and critically assessed. In a rapidly evolving field this State of the Art Report, based mainly on independent not commercial literature, will be of value to corrosion engineers and civil engineers concerned with maintenance and repair of reinforced concrete structures.

Download or read book Principles of Corrosion Engineering and Corrosion Control written by Zaki Ahmad and published by Elsevier. This book was released on 2006-09-18 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion is a huge issue for materials, mechanical, civil and petrochemical engineers. With comprehensive coverage of the principles of corrosion engineering, this book is a one-stop text and reference for students and practicing corrosion engineers. Highly illustrated, with worked examples and definitions, it covers basic corrosion principles, and more advanced information for postgraduate students and professionals. Basic principles of electrochemistry and chemical thermodynamics are incorporated to make the book accessible for students and engineers who do not have prior knowledge of this area. Each form of corrosion covered in the book has a definition, description, mechanism, examples and preventative methods. Case histories of failure are cited for each form. End of chapter questions are accompanied by an online solutions manual.* Comprehensively covers the principles of corrosion engineering, methods of corrosion protection and corrosion processes and control in selected engineering environments* Structured for corrosion science and engineering classes at senior undergraduate and graduate level, and is an ideal reference that readers will want to use in their professional work* Worked examples, extensive end of chapter exercises and accompanying online solutions and written by an expert from a key pretochemical university

Download or read book Carbon Dioxide Mineralization and Utilization written by Pen-Chi Chiang and published by Springer. This book was released on 2017-03-04 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on an important technology for mineralizing and utilizing CO2 instead of releasing it into the atmosphere. CO2 mineralization and utilization demonstrated in the waste-to-resource supply chain can “reduce carbon dependency, promote resource and energy efficiency, and lessen environmental quality degradation,” thereby reducing environmental risks and increasing economic benefits towards Sustainable Development Goals (SDG). In this book, comprehensive information on CO2 mineralization and utilization via accelerated carbonation technology from theoretical and practical considerations was presented in 20 Chapters. It first introduces the concept of the carbon cycle from the thermodynamic point of view and then discusses principles and applications regarding environmental impact assessment of carbon capture, storage and utilization technologies. After that, it describes the theoretical and practical considerations for “Accelerated Carbonation (Mineralization)” including analytical methods, and systematically presents the carbonation mechanism and modeling (process chemistry, reaction kinetics and mass transfer) and system analysis (design and analysis of experiments, life cycle assessment and cost benefit analysis). It then provides physico-chemical properties of different types of feedstock for CO2 mineralization and then explores the valorization of carbonated products as green materials. Lastly, an integral approach for waste treatment and resource recovery is introduced, and the carbonation system is critically assessed and optimized based on engineering, environmental, and economic (3E) analysis. The book is a valuable resource for readers who take scientific and practical interests in the current and future Accelerated Carbonation Technology for CO2 Mineralization and Utilization.

Download or read book Production Chemicals for the Oil and Gas Industry written by Malcolm A. Kelland and published by CRC Press. This book was released on 2014-03-13 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text discusses a wide variety of production chemicals used by the oil and gas industry for down-hole and topside applications both onshore and offshore. It reviews all past and present classes of production chemicals, providing numerous difficult-to-obtain references. Unlike other texts that focus on how products perform in the field, this book focuses on the specific structures of chemicals that are known to deliver the required or desired performance. Where known, it also details the environmental aspects of the chemicals discussed and their success in the field.

Download or read book Process Intensification written by David Reay and published by Butterworth-Heinemann. This book was released on 2013-06-05 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Intensification: Engineering for Efficiency, Sustainability and Flexibility is the first book to provide a practical working guide to understanding process intensification (PI) and developing successful PI solutions and applications in chemical process, civil, environmental, energy, pharmaceutical, biological, and biochemical systems. Process intensification is a chemical and process design approach that leads to substantially smaller, cleaner, safer, and more energy efficient process technology. It improves process flexibility, product quality, speed to market and inherent safety, with a reduced environmental footprint. This book represents a valuable resource for engineers working with leading-edge process technologies, and those involved research and development of chemical, process, environmental, pharmaceutical, and bioscience systems. - No other reference covers both the technology and application of PI, addressing fundamentals, industry applications, and including a development and implementation guide - Covers hot and high growth topics, including emission prevention, sustainable design, and pinch analysis - World-class authors: Colin Ramshaw pioneered PI at ICI and is widely credited as the father of the technology

Download or read book Chemical Tradename Dictionary written by Michael Ash and published by John Wiley & Sons. This book was released on 1996-12-17 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: This key reference will serve as the most comprehensive source for identifying and locating products in the international chemical marketplace. It has been written for the chemists, materials sientists, end-product formulators, industrial application specialists and scientists working in associated fields.

Download or read book Chemistry and Technology of Surfactants written by Richard J. Farn and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surfactants are used throughout industry as components in a hugerange of formulated products or as effect chemicals in theproduction or processing of other materials. A detailedunderstanding of the basis of their activity is required by allthose who use surfactants, yet the new graduate or postgraduatechemist or chemical engineer will generally have little or noexperience of how and why surfactants work. Chemistry & Technology of Surfactants is aimed at newgraduate or postgraduate level chemists and chemical engineers atthe beginning their industrial careers and those in later life whobecome involved with surfactants for the first time. The book is astraightforward and practical survey of the chemistry ofsurfactants and their uses, providing a basic introduction tosurfactant theory, information on the various types of surfactantand some application details. This will allow readers to build ontotheir scientific education the concepts and principles on which thesuccessful use of surfactants, across a wide range of industries,is based.

Download or read book Coal Gasification and Its Applications written by David A. Bell and published by William Andrew. This book was released on 2010-12-08 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Skyrocketing energy costs have spurred renewed interest in coal gasification. Currently available information on this subject needs to be updated, however, and focused on specific coals and end products. For example, carbon capture and sequestration, previously given little attention, now has a prominent role in coal conversion processes.This book approaches coal gasification and related technologies from a process engineering point of view, with topics chosen to aid the process engineer who is interested in a complete, coal-to-products system. It provides a perspective for engineers and scientists who analyze and improve components of coal conversion processes.The first topic describes the nature and availability of coal. Next, the fundamentals of gasification are described, followed by a description of gasification technologies and gas cleaning processes. The conversion of syngas to electricity, fuels and chemicals is then discussed. Finally, process economics are covered. Emphasis is given to the selection of gasification technology based on the type of coal fed to the gasifier and desired end product: E.g., lower temperature gasifiers produce substantial quantities of methane, which is undesirable in an ammonia synthesis feed. This book also reviews gasification kinetics which is informed by recent papers and process design studies by the US Department of Energy and other groups, and also largely ignored by other gasification books.• Approaches coal gasification and related technologies from a process engineering point of view, providing a perspective for engineers and scientists who analyze and improve components of coal conversion processes • Describes the fundamentals of gasification, gasification technologies, and gas cleaning processes • Emphasizes the importance of the coal types fed to the gasifier and desired end products • Covers gasification kinetics, which was largely ignored by other gasification books - Provides a perspective for engineers and scientists who analyze and improve components of the coal conversion processes - Describes the fundamentals of gasification, gasification technologies, and gas cleaning processes - Covers gasification kinetics, which was largely ignored by other gasification books

Download or read book Fundamental Modeling of Membrane Systems written by Patricia Luis and published by Elsevier. This book was released on 2018-06-29 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental Modelling of Membrane Systems: Membrane and Process Performance summarizes the state-of-the-art modeling approaches for all significant membrane processes, from molecular transport, to process level, helping researchers and students who carry out experimental research save time and accurately interpret experimental data. The book provides an overview of the different membrane technologies, handling micro-, ultra-, and nanofiltration, reverse and forward osmosis, pervaporation, gas permeation, supported liquid membranes, membrane contactors, membrane bioreactors and ion-exchange membrane systems. Examples of hybrid membrane systems are also included. - Presents an accessible reference on how to model membranes and membrane processes - Provides a clear, mathematical description of mass transfer in membrane systems - Written by well-known, prominent authors in the field of membrane science

Download or read book Foams written by J.J. Bikerman and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book Foams: Theory and Industrial Applications, written by the undersigned and three collaborators and published in 1953, is still the only monograph on liquid foam in the English language. Naturally the science of foams had advanced in the intervening years so that a practically new book had to be prepared to give justice to the present state of our know ledge. This monograph has only one author and does not deal with solid foams, fire-fighting foams, and flotation, on which information is available elsewhere. The other applications of foam and its fundamental properties are reviewed at length and, whenever possible, attempts are made to reach the truth through a maze of conflicting evidence. February 1973 J. J. BIKERMAN Contents page Preface . v 1. General. Foam Films (Sections 1-22) 1 Foam Films 5 References 30 2. Formation and Structure (Sections 23-42) 33 Dispersion Methods 33 Condensation Methods 51 Foam Structure 59 References 62 3. Measurement of Foaminess (Sections 43-62) 65 Films and Bubbles 66 Foams. 76 References 94 4. Results of Foaminess Measurements (Sections 63-84) . 98 Poorly Foaming Liquids . 98 Strongly Foaming Liquids 108 Other Systems 132 References 140 5. Three-phase Foams (Sections 85-90) 149 References 157 6. Foam Drainage (Sections 91-106) 159 Experimental Data . 173 References 181 7. Mechanical Properties of Foams (Sections 107-122) 184 References 211 8. Optical Properties of Foams (Sections 123 -127) . 214 References 222 vii viii Contents 9.

Download or read book Phenolic Resins A Century of Progress written by Louis Pilato and published by Springer Science & Business Media. This book was released on 2010-03-10 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: The legacy of Leo Hendrik Baekeland and his development of phenol formal- hyde resins are recognized as the cornerstone of the Plastics Industry in the early twentieth century, and phenolic resins continue to ?ourish after a century of robust growth. On July 13, 1907, Baekeland ?led his “heat and pressure” patent related to the processing of phenol formaldehyde resins and identi?ed their unique utility in a plethora of applications. The year 2010 marks the Centennial Year of the prod- tion of phenolic resins by Leo Baekeland. In 1910, Baekeland formed Bakelite GmbH and launched the manufacture of phenolic resins in Erkner in May 1910. In October 1910, General Bakelite began producing resins in Perth Amboy, New Jersey. Lastly, Baekeland collaborated with Dr. Takamine to manufacture phenolic resins in Japan in 1911. These events were instrumental in establishing the Plastics Industry and in tracing the identity to the brilliance of Dr. Leo Baekeland. Phenolic resins remain as a versatile resin system featuring either a stable, thermoplastic novolak composition that cures with a latent source of formaldehyde (hexa) or a heat reactive and perishable resole composition that cures thermally or under acidic or special basic conditions. Phenolic resins are a very large volume resin system with a worldwide volume in excess of 5 million tons/year, and its growth is related to the gross national product (GNP) growth rate globally.

Download or read book Absorption Based Post Combustion Capture of Carbon Dioxide written by Paul Feron and published by Woodhead Publishing. This book was released on 2016-05-27 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: Absorption-Based Post-Combustion Capture of Carbon Dioxide provides a comprehensive and authoritative review of the use of absorbents for post-combustion capture of carbon dioxide. As fossil fuel-based power generation technologies are likely to remain key in the future, at least in the short- and medium-term, carbon capture and storage will be a critical greenhouse gas reduction technique. Post-combustion capture involves the removal of carbon dioxide from flue gases after fuel combustion, meaning that carbon dioxide can then be compressed and cooled to form a safely transportable liquid that can be stored underground. - Provides researchers in academia and industry with an authoritative overview of the amine-based methods for carbon dioxide capture from flue gases and related processes - Editors and contributors are well known experts in the field - Presents the first book on this specific topic

Download or read book Foams Physics Chemistry and Structure written by Ashley J. Wilson and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: Foams and froths are an important feature of everyday life; one only has to think of shaving foam, foam upholstery, fire fighting foam, bread, bear head, and ice cream. Less obvious but equally important are the foams and foaming processes which are being exploited in ever more complex and imaginative ways in industry. However, the unusual nature of foams, the fact that they are neither solids or liquids, and their very fragility has prevented scientists from obtaining a thorough understanding of even the basic principles of foam formation and stability. This volume presents papers on the physics, chemistry, structure and ultrastructure of foams by contributors from a wide range of backgrounds and research disciplines. The aim of the book is to present a unique multi-disciplinary cross section of work currently being undertaken on the subject of foams.