Download or read book Carbon Nanotubes in Hydrogen Fuel Cells written by Jason Ming-Young Tang and published by . This book was released on 2007 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanotechnology in Fuel Cells written by Huaihe Song and published by Elsevier. This book was released on 2022-02-23 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology in Fuel Cells focuses on the use of nanotechnology in macroscopic and nanosized fuel cells to enhance their performance and lifespan. The book covers the fundamental design concepts and promising applications of nanotechnology-enhanced fuel cells and their advantages over traditional fuel cells in portable devices, including longer shelf life and lower cost. In the case of proton-exchange membrane fuel cells (PEMFCs), nano-membranes could provide 100 times higher conductivity of hydrogen ions in low humidity conditions than traditional membranes. For hydrogen fuel cell, nanocatalysts (Pt hybrid nanoparticles) could provide 12 times higher catalytic activity. This is an important reference source for materials scientists and engineers who are looking to understand how nanotechnology is being used to create more efficient macro- and nanosized fuel cells. Outlines how fuel cells can be nanoengineered to enhance their performance and lifespan Covers a variety of fuel cell types, including proton-exchange membrane fuel cells and hydrogen-based fuel cells Assesses the major challenges of nanoengineering fuel cells at an industrial scale
Download or read book Carbon Nanotube microwave Interactions and Applications to Hydrogen Fuel Cells written by Timothy James Imholt and published by . This book was released on 2004 with total page 109 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Carbon Nanotubes written by Ann Rose Abraham and published by CRC Press. This book was released on 2022-10-06 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new book discusses a selection of advanced topics on carbon nanotubes—their extraordinary properties, structure, design, fabrication, development, engineering, functionalization, carbon nanotube enabled nanocomposites, characterization, and, moreover, their utility in many applications. The volume highlights the amazing potential of advanced CNT composites in automotive, aeronautics, spacecrafts, transistors replacing Si electronics, energy, purification, hydrogen storage, tissue regeneration, electrochemical supercapacitors, sensing, biomedical applications, agriculture, energy, and technical applications. The book specifically discusses the applications of carbon nanotubes for a greener environment, as well as applications for biomedical uses, in drug delivery, and in display technology. It also explores the uses of CNTs in the energy and aerospace industries, such as for solar energy conversion, as a lubricant additive for enhancing energy efficiency, and more. Other chapters explore the potential of carbon nanotubes in hydrogen storage and carbon nanotube electronics.
Download or read book Carbon Nanotubes for Energy and Environmental Applications written by Soney C. George and published by CRC Press. This book was released on 2022-10-27 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new book, Carbon Nanotubes for Energy and Environmental Applications, covers the timely issue of green applications of carbon nanotubes. It covers the diverse usages of carbon nanotubes for the sensing of environmentally hazardous chemicals, for water purification, for the protection of the environment, and for new energy applications. The development of highly sensitive CNT-based gas sensors for air pollution monitoring, for green synthesis of carbon nanotubes, and for green energy applications are discussed in this volume. The diverse topics in the volume include nanodiamonds for energy storage, new lubricant additives that enhance energy efficiency, how carbon nanotubes can be applied in the food and agricultural sectors, the use of CNTs in water purification and desalination, carbon nanotubes-based electrochemical sensors for environmentally hazardous chemicals, and much more. This timely book addresses a need of the hour and will provide valuable for environmentally conscious industry professionals, faculty and students, and researchers in materials science, engineering, physics, and chemistry with interest in nanomaterials.
Download or read book Green Synthesis of Nanomaterials for Bioenergy Applications written by Neha Srivastava and published by John Wiley & Sons. This book was released on 2020-11-09 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: An authoritative summary of the quest for an environmentally sustainable synthesis process of nanomaterials and their application for environmental sustainability Green Synthesis of Nanomaterials for Bioenergy Applications is an important guide that provides information on the fabrication of nanomaterial and the application of low cost, green methods. The book also explores the impact on various existing bioenergy approaches. Throughout the book, the contributors—noted experts on the topic—offer a reliable summary of the quest for an environmentally sustainable synthesis process of nanomaterials and their application to the field of environmental sustainability. The green synthesis of nanoparticles process has been widely accepted as a promising technique that can be applied to a variety of fields. The green nanotechnology-based production processes to fabricate nanomaterials operates under green conditions without the intervention of toxic chemicals. The book’s exploration of more reliable and sustainable processes for the synthesis of nanomaterials, can lead to the commercial application of the economically viability of low-cost biofuels production. This important book: Summarizes the quest for an environmentally sustainable synthesis process of nanomaterials for their application to the field of environmental sustainability Offers an alternate, sustainable green energy approach that can be commercially implemented worldwide Covers recent approaches such as fabrication of nanomaterial that apply low cost, green methods and examines its impact on various existing bioenergy applications Written for researchers, academics and students of nanotechnology, nanosciences, bioenergy, material science, environmental sciences, and pollution control, Green Synthesis of Nanomaterials for Bioenergy Applications is a must-have guide that covers green synthesis and characterization of nanomaterials for cost effective bioenergy applications.
Download or read book Investigation of Hydrogen Storage in Single Walled Carbon Nanotubes for Fuel Cells 2 written by and published by . This book was released on 2010 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: Single walled carbon nanotubes (SWCNTs) dispersed in 2-propanol are deposited on the alumina substrate using drop caste method. The deposited SWCNTs are characterized using the techniques SEM, EDS and FTIR. Then the SWCNTs are functionalized with BH3 using LiBH4 as the precursor. FTIR, XPS and CHNS techniques are use to confirm the functionalization. The functional groups are identified from FTIR studies. The various elements present in the functionalized SWCNTs are identified from XPS and CHNS studies. The functionalized samples are hydrogenated and the hydrogen storage capacity of these samples is estimated. The SWCNT deposition, functionalization with BH3 and hydrogenation are carried out successfully for the first time. The SWCNTs have been successfully functionalized with BH3 as predicted theoretically using LiBH4 as the precursor. From XPS studies, the presence of Li, B, and O are observed in our sample. Presence of BH3 is confirmed using FTIR studies. The hydrogen storage capacity of the functionalized SWCNTs is found to be 1.5 wt% at 50 deg C. Hydrogenation depends upon various parameters which are to be optimized to achieve maximum hydrogen storage capacity.
Download or read book Carbon Nanomaterials in Clean Energy Hydrogen Systems written by Bogdan Baranowski and published by Springer Science & Business Media. This book was released on 2008-10-20 with total page 921 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2007 ARW “Using Carbon Nanomaterials in Clean-Energy Hydrogen Systems” (UCNCEHS’2007) was held in September 22–28, 2007 in the remarkable town Sudak (Crimea, Ukraine) known for its heroic and unusual fate. In the tradition of the earlier conferences, UCNCEHS’2007 meeting served as an multidisciplinary forum for the presentation and discussion of the most recent research on transition to hydrogen-based energy systems, technologies for hydrogen production, storage, utilization, carbon nanomaterials processing and chemical behavior, energy and environmental problems. The aim of UCNCEHS’2007 was to provide the wide overview of the latest scientific results on basic research and technological applications of hydrogen interactions with carbon materials. The active representatives from research/academic organizations and governmental agencies could meet, discuss and present the most recent advances in hydrogen concepts, processes and systems, to evaluate current progress and to exchange academic information, to identify research needs and future development in this important area. This ARW should help further the progress of hydrogen-based science and promote the role of hydrogen and carbon nanomaterials in the energy field.
Download or read book Nanostructured Materials for Next Generation Energy Storage and Conversion written by Ying-Pin Chen and published by Springer. This book was released on 2017-05-31 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 1 of a 4-volume series is a concise, authoritative and an eminently readable and enjoyable experience related to hydrogen production, storage and usage for portable and stationary power. Although the major focus is on hydrogen, discussion of fossil fuels and nuclear power is also presented where appropriate. This monograph is written by recognized experts in the field, and is both timely and appropriate as this decade will see application of hydrogen as an energy carrier, for example in transportation sector. The world's reliance on fossil fuels is due to the ever growing need for energy to sustain life and on-going progress; however exploitation also brings consequences such as emission of carbon, nitrogen and sulfur dioxides into the atmosphere. The collective influence of these photochemical gases is production of acid rain and an alternation of global temperatures, leading to record high temperatures in many parts of the world. The fossil fuel is unsustainable and thus there is a critical need for alternative sustainable energy resources. One universal energy carrier is hydrogen, which is the focus of this volume. This book is suitable for those who work in the energy field as technical experts, including engineers and scientists, as well as managers, policy and decision-makers, environmentalists and consultants. Students and practitioners such as lectures, teachers, legislators and their aids in the field of energy will find this book invaluable and a practical handbook or guide in the field of sustainable energy with emphasis on hydrogen as an energy carrier.
Download or read book Nanostructured Materials for Next Generation Energy Storage and Conversion written by Fan Li and published by Springer. This book was released on 2018-04-17 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: The energy crisis and pollution have posed significant risks to the environment, transportation, and economy over the last century. Thus, green energy becomes one of the critical global technologies and the use of nanomaterials in these technologies is an important and active research area. This book series presents the progress and opportunities in green energy sustainability. Developments in nanoscaled electrocatalysts, solid oxide and proton exchange membrane fuel cells, lithium ion batteries, and photovoltaic techniques comprise the area of energy storage and conversion. Developments in carbon dioxide (CO2) capture and hydrogen (H2) storage using tunable structured materials are discussed. Design and characterization of new nanoscaled materials with controllable particle size, structure, shape, porosity and band gap to enhance next generation energy systems are also included. The technical topics covered in this series are metal organic frameworks, nanoparticles, nanocomposites, proton exchange membrane fuel cell catalysts, solid oxide fuel cell electrode design, trapping of carbon dioxide, and hydrogen gas storage.
Download or read book Nanomaterials for Fuel Cell Catalysis written by Kenneth I. Ozoemena and published by Springer. This book was released on 2016-07-05 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: Global experts provide an authoritative source of information on the use of electrochemical fuel cells, and in particular discuss the use of nanomaterials to enhance the performance of existing energy systems. The book covers the state of the art in the design, preparation, and engineering of nanoscale functional materials as effective catalysts for fuel cell chemistry, highlights recent progress in electrocatalysis at both fuel cell anode and cathode, and details perspectives and challenges in future research.
Download or read book Micro Nano Engineering of Fuel Cells written by Dennis Y.C. Leung and published by CRC Press. This book was released on 2015-04-24 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel cells are clean and efficient energy conversion devices expected to be the next generation power source. During more than 17 decades of research and development, various types of fuel cells have been developed with a view to meet the different energy demands and application requirements. Scientists have devoted a great deal of time and effort
Download or read book Designing and Building Fuel Cells written by Colleen Spiegel and published by McGraw Hill Professional. This book was released on 2007-05-22 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Acquire an All-in-One Toolkit for Expertly Designing, Modeling, and Constructing High-Performance Fuel Cells Designing and Building Fuel Cells equips you with a hands-on guide for the design, modeling, and construction of fuel cells that perform as well or better than some of the best fuel cells on the market today. Filled with over 120 illustrations and schematics of fuel cells and components, this “one-stop” guide covers fuel cell applications...fuels and the hydrogen economy...fuel cell chemistry, thermodynamics, and electrochemistry...fuel cell modeling, materials, and system design...fuel types, delivery, and processing...fuel cell operating conditions...fuel cell characterization...and much more. Authoritative and practical, Designing and Building Fuel Cells features: Complete information on stack design The latest fuel cell modeling techniques Guidance on cutting-edge materials and components Expert accounts of fuel cell types, processing, and optimization A step-by-step example for constructing a fuel cell Inside This State-of-the-Art Fuel Cell Sourcebook Introduction • Fuel Cell Applications • Fuel Cells and the Hydrogen Economy • Basic Fuel Cell Chemistry and Thermodynamics • Fuel Cell Electrochemistry • Fuel Cell Charge Transport • Fuel Cell Mass Transport • Fuel Cell Heat Transport • Fuel Cell Modeling • Fuel Cell Materials • Fuel Cell Stack Components and Materials • Fuel Cell Stack Design • Fuel Cell System Design • Fuel Types, Delivery, and Processing • Fuel Cell Operating Conditions • Fuel Cell Characterization
Download or read book Nanomaterials for Alcohol Fuel Cells written by Inamuddin and published by Materials Research Forum LLC. This book was released on 2019-05-25 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alcohol fuel cells are very attractive as power sources for mobile and portable applications. As they convert the chemical energy of fuels into electricity, much recent research is directed at developing suitable and efficient catalysts for the process. The present book focuses on pertinent types of nanomaterial-based catalysts, membranes and supports.
Download or read book Environmental Chemistry for a Sustainable World written by Eric Lichtfouse and published by Springer Science & Business Media. This book was released on 2011-11-27 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental chemistry is a fast developing science aimed at deciphering fundamental mechanisms ruling the behaviour of pollutants in ecosystems. Applying this knowledge to current environmental issues leads to the remediation of environmental media, and to new, low energy, low emission, sustainable processes. Nanotechnology applications for alternative energies such as solar power, fuel cells, hydrogen and lithium batteries are reviewed in the first section. Recent investigations on carbon nanotubes, nanocatalysts and cyclodextrins disclose unprecedented techniques to monitor and clean pollutants such as greenhouse gases, heavy metals, pesticides, pathogens occurring in water, air and soil. The second section reviews the risks for human health of critical pollutants such as endocrine disruptors, dioxins and heavy metals contaminating seafood and sediments. An exhaustive review of DDT isomers reveals unexpected mechanisms of DDT transfer to fishes. A chapter on pollutant geochronology using river sedimentary archives provides novel insights on pollution history since the beginning of the anthropocene. This book will be a valuable source of information for engineers and students developing novel applied techniques to monitor and clean pollutants in air, wastewater, soils and sediments.
Download or read book PEM Fuel Cells written by Gurbinder Kaur and published by Elsevier. This book was released on 2021-11-16 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: PEM Fuel Cells: Fundamentals, Advanced Technologies, and Practical Application provides a comprehensive introduction to the principles of PEM fuel cell, their working condition and application, and the latest breakthroughs and challenges for fuel cell technology. Each chapter follows a systematic and consistent structure with clear illustrations and diagrams for easy understanding. The opening chapters address the basics of PEM technology; stacking and membrane electrode assembly for PEM, degradation mechanisms of electrocatalysts, platinum dissolution and redeposition, carbon-support corrosion, bipolar plates and carbon nanotubes for the PEM, and gas diffusion layers. Thermodynamics, operating conditions, and electrochemistry address fuel cell efficiency and the fundamental workings of the PEM. Instruments and techniques for testing and diagnosis are then presented alongside practical tests. Dedicated chapters explain how to use MATLAB and COMSOL to conduct simulation and modeling of catalysts, gas diffusion layers, assembly, and membrane. Degradation and failure modes are discussed in detail, providing strategies and protocols for mitigation. High-temperature PEMs are also examined, as are the fundamentals of EIS. Critically, the environmental impact and life cycle of the production and storage of hydrogen are addressed, as are the risk and durability issues of PEMFC technology. Dedicated chapters are presented on the economics and commercialization of PEMFCs, including discussion of installation costs, initial capital costs, and the regulatory frameworks; apart from this, there is a separate chapter on their application to the automotive industry. Finally, future challenges and applications are considered. PEM Fuel Cells: Fundamentals, Advanced Technologies, and Practical Application provides an in-depth and comprehensive reference on every aspect of PEM fuel cells fundamentals, ideal for researchers, graduates, and students. Presents the fundamentals of PEM fuel cell technology, electrolytes, membranes, modeling, conductivity, recent trends, and future applications Addresses commercialization, public policy, and the environmental impacts of PEMFC in dedicated chapters Presents state-of-the-art PEMFC research alongside the underlying concepts
Download or read book Nanomaterials for Solid State Hydrogen Storage written by Robert A. Varin and published by Springer Science & Business Media. This book was released on 2009-01-13 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past decade, important advances have been made in the development of nanostructured materials for solid state hydrogen storage used to supply hydrogen to fuel cells in a clean, inexpensive, safe and efficient manner. Nanomaterials for Solid State Hydrogen Storage focuses on hydrogen storage materials having high volumetric and gravimetric hydrogen capacities, and thus having the highest potential of being applied in the automotive sector. Written by leading experts in the field, Nanomaterials for Solid State Hydrogen Storage provides a thorough history of hydrides and nanomaterials, followed by a discussion of existing fabrication methods. The authors’ own research results in the behavior of various hydrogen storage materials are also presented. Covering fundamentals, extensive research results and recent advances in nanomaterials for solid state hydrogen storage, this book serves as a comprehensive reference.
