Download or read book Carbon Nanotubes and Related Structures written by Peter John Frederich Harris and published by Cambridge University Press. This book was released on 2001-10-18 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a 1999 book on carbon nanotubes, one of the most exciting areas in materials chemistry.

Download or read book Carbon Nanotubes and Related Structures written by Dirk M. Guldi and published by John Wiley & Sons. This book was released on 2010-01-26 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by the most prominent experts and pioneers in the field, this ready reference combines fundamental research, recent breakthroughs and real-life applications in one well-organized treatise. As such, both newcomers and established researchers will find here a wide range of current methods for producing and characterizing carbon nanotubes using imaging as well as spectroscopic techniques. One major part of this thorough overview is devoted to the controlled chemical functionalization of carbon nanotubes, covering intriguing applications in photovoltaics, organic electronics and materials design. The latest research on novel carbon-derived structures, such as graphene, nanoonions and carbon pea pods, round off the book.

Download or read book Medicinal Chemistry and Pharmacological Potential of Fullerenes and Carbon Nanotubes written by Franco Cataldo and published by Springer Science & Business Media. This book was released on 2008-09-08 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fullerenes and nanotubes are two classes of carbon structures or allotropes, which were discovered about 17 years ago. Since that time, many chemical derivatives have been synthesized using fullerenes and nanotubes as building blocks. Particularly promising was the theory that the chemical properties of fullerenes, and certain derivatives, made them likely candidates for anticancer drugs, inhibitors of viruses such as HIV, or even as anti-bacterials. Their cyctotoxicity can also be controlled by specific circumstances. In addition, the funtionalization of nanotubes has not only produced relatively simple derivatives, but also complex hybrids with biological macromolecules, which show unique supramolecular architecture and which are promising in many medical applications. The application of fullerenes and nanotubes in medicine is at the frontier of our knowledge, thus the work in this field represents the basis for future novel developments.

Download or read book Carbon Nanotubes written by Michael J. O’Connell and published by CRC Press. This book was released on 2018-10-03 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since their discovery more than a decade ago, carbon nanotubes (CNTs) have held scientists and engineers in captive fascination, seated on the verge of enormous breakthroughs in areas such as medicine, electronics, and materials science, to name but a few. Taking a broad look at CNTs and the tools used to study them, Carbon Nanotubes: Properties and Applications comprises the efforts of leading nanotube researchers led by Michael O’Connell, protégé of the late father of nanotechnology, Richard Smalley. Each chapter is a self-contained treatise on various aspects of CNT synthesis, characterization, modification, and applications. The book opens with a general introduction to the basic characteristics and the history of CNTs, followed by discussions on synthesis methods and the growth of “peapod” structures. Coverage then moves to electronic properties and band structures of single-wall nanotubes (SWNTs), magnetic properties, Raman spectroscopy of electronic and chemical behavior, and electromechanical properties and applications in NEMS (nanoelectromechanical systems). Turning to applications, the final sections of the book explore mechanical properties of SWNTs spun into fibers, sidewall functionalization in composites, and using SWNTs as tips for scanning probe microscopes. Taking a fresh look at this burgeoning field, Carbon Nanotubes: Properties and Applications points the way toward making CNTs commercially viable.

Download or read book Carbon Nanotube Science written by Peter J. F. Harris and published by Cambridge University Press. This book was released on 2009-03-19 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides coverage of all of the important aspects of carbon nanotube research, including synthesis, properties and potential applications.

Download or read book Physical Properties of Carbon Nanotubes written by Riichiro Saito and published by World Scientific Publishing Company. This book was released on 1998-01-01 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an introductory textbook for graduate students and researchers from various fields of science who wish to learn about carbon nanotubes. The field is still at an early stage, and progress continues at a rapid rate. This book focuses on the basic principles behind the physical properties and gives the background necessary to understand the recent developments. Some useful computational source codes which generate coordinates for carbon nanotubes are also included in the appendix.

Download or read book Carbon Nanotubes written by Ado Jorio and published by Springer Science & Business Media. This book was released on 2007-12-18 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on the success of its predecessor, Carbon Nanotubes: Synthesis, Structure, Properties and Applications, this second volume focuses on those areas that have grown rapidly in the past few years. Contributing authors reflect the multidisciplinary nature of the book and are all leaders in their particular areas of research. Among the many topics they cover are graphene and other carbon-like and tube-like materials, which are likely to affect and influence developments in nanotubes within the next five years. Extensive use of illustrations enables you to better understand and visualize key concepts and processes.

Download or read book Carbon Nanotube and Related Field Emitters written by Yahachi Saito and published by John Wiley & Sons. This book was released on 2010-10-01 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes (CNTs) have novel properties that make them potentially useful in many applications in nanotechnology, electronics, optics and other fields of materials science. These characteristics include extraordinary strength, unique electrical properties, and the fact that they are efficient heat conductors. Field emission is the emission of electrons from the surface of a condensed phase into another phase due to the presence of high electric fields. CNT field emitters are expected to make a breakthrough in the development of field emission display technology and enable miniature X-ray sources that will find a wide variety of applications in electronic devices, industry, and medical and security examinations. This first monograph on the topic covers all aspects in a concise yet comprehensive manner - from the fundamentals to applications. Divided into four sections, the first part discusses the preparation and characterization of carbon nanotubes, while part two is devoted to the field emission properties of carbon nanotubes, including the electron emission mechanism, characteristics of CNT electron sources, and dynamic behavior of CNTs during operation. Part three highlights field emission from other nanomaterials, such as carbon nanowalls, diamond, and silicon and zinc oxide nanowires, before concluding with frontier R&D applications of CNT emitters, from vacuum electronic devices such as field emission displays, to electron sources in electron microscopes, X-ray sources, and microwave amplifiers. Edited by a pioneer in the field, each chapter is written by recognized experts in the respective fields.

Download or read book Nanotubes and Nanowires written by C N Ram Rao and published by Royal Society of Chemistry. This book was released on 2015-10-09 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research and literature on nanomaterials has exploded in volume in recent years. Nanotubes (both of carbon and inorganic materials) can be made in a variety of ways, and they demonstrate a wide range of interesting properties. Many of these properties, such as high mechanical strength and interesting electronic properties relate directly to potential applications. Nanowires have been made from a vast array of inorganic materials and provide great scope for further research into their properties and possible applications. This book provides a comprehensive and up-to-date survey of the research areas of carbon nanotubes, inorganic nanotubes and nanowires including: synthesis; characterisation; properties; applications Nanotubes and Nanowires includes an extensive list of references and is ideal both for graduates needing an introduction to the field of nanomaterials as well as for professionals and researchers in academia and industry.

Download or read book Electronic Properties of Carbon Nanotubes written by Leroy Sidney and published by . This book was released on 2016-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes (CNTs) are tubular cylinders of carbon atoms that have extraordinary mechanical, electrical, thermal, optical and chemical properties. CNTs typically have diameters ranging from 1 nanometer (nm) up to 50 nma nanometer is one thousand millionth of a meter. Typical CNT lengths are several micronsseveral thousand nanometers long; by contrast, Nanocomp's produced fibers are measured in millimetersthousands of times longer than all other commercially produced CNTs. They take the form of cylindrical carbon molecules and have novel properties that make them potentially useful in a wide variety of applications in nanotechnology, electronics, optics and other fields of materials science. They exhibit extraordinary strength and unique electrical properties, and are efficient conductors of heat. In the powdery format offered by all CNT producers (but for NTI), applications are limited to the properties possible by this form factore.g. additive active ingredients in semiconductors, liquid crystal displays (LCDs), sensors, and other uses in which these powders add some level of functional performance. Due to its fiber length and its form factors, NTI delivers strength and conductivity unlike any other commercial CNT producer, and so can address a much broader array of applications for which its material rivals copper and aluminum in conductivity, and steel, aluminum, carbon fibers and glass composites where strength and lightweight matter. Carbon nanotubes have been a subject of exhaustive research for a wide range of applications. The purpose of this book entitled Properties of Carbon Nanotubes is to give in-depth understanding of the physics and electronic structure of carbon nanotubes. This book discusses fabrication techniques followed by an analysis on the physical properties of carbon nanotubes, including density of states and electronic structures. Eventually, the book follows a significant amount of work in the industry applications of carbon nanotubes.

Download or read book Carbon Nanotube Based VLSI Interconnects written by Brajesh Kumar Kaushik and published by Springer. This book was released on 2014-11-01 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: The brief primarily focuses on the performance analysis of CNT based interconnects in current research scenario. Different CNT structures are modeled on the basis of transmission line theory. Performance comparison for different CNT structures illustrates that CNTs are more promising than Cu or other materials used in global VLSI interconnects. The brief is organized into five chapters which mainly discuss: (1) an overview of current research scenario and basics of interconnects; (2) unique crystal structures and the basics of physical properties of CNTs, and the production, purification and applications of CNTs; (3) a brief technical review, the geometry and equivalent RLC parameters for different single and bundled CNT structures; (4) a comparative analysis of crosstalk and delay for different single and bundled CNT structures; and (5) various unique mixed CNT bundle structures and their equivalent electrical models.

Download or read book Syntheses and Applications of Carbon Nanotubes and Their Composites written by Satoru Suzuki and published by BoD – Books on Demand. This book was released on 2013-05-09 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes are rolled up graphene sheets with a quasi-one-dimensional structure of nanometer-scale diameter. In these last twenty years, carbon nanotubes have attracted much attention from physicists, chemists, material scientists, and electronic device engineers, because of their excellent structural, electronic, optical, chemical and mechanical properties. More recently, demand for innovative industrial applications of carbon nanotubes is increasing. This book covers recent research topics regarding syntheses techniques of carbon nanotubes and nanotube-based composites, and their applications. The chapters in this book will be helpful to many students, engineers and researchers working in the field of carbon nanotubes.

Download or read book Nanobiomaterials written by Dong Kee Yi and published by CRC Press. This book was released on 2013-08-14 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a continuous exchange of ideas taking place at the border of the biological and physical sciences in many areas of nanoscience. Nanotechnology uses biomimetic or bio-inspired processes to produce nanosized materials for applications in biology and other fields. In return, the fruits of nanotechnology are applied to expanding areas of biomedical and therapeutic processes, such as new nanostructures and scaffolds for tissue engineering or targeted drug delivery. In this way, nanobiotechnology serves as a bridge between nano and bio, with nanoscale materials providing the building blocks for the construction of the "bridge." Nanobiomaterials: Development and Applications gives you a broad, interdisciplinary view of current developments as well as new findings and applications in bionanomaterials. The book brings together the work of international contributors who are actively engaged at the forefront of research in their respective disciplines. Organized into four parts, this book explores the preparation and characterization of nanomaterials, new preparation routes of soft nanomaterials using biomolecules, nano- and microscale hybridization of materials, and nanotoxicity. The contributors cover a diverse set of topics, including: Biomimetic synthesis Bioimaging and cancer diagnosis Photodynamic therapy Bioconjugated carbon nanotube DNA transfection and tumor targeting Magnetically induced hyperthermia Cytotoxity mechanisms and their potential use in therapy Virus-enabled manufacturing of functional nanomaterials Biocatalitic nanosystems and enzyme immobilization Tissue engineering The fabrication of hybrid microswimmers Bionanomaterial applications in environmental remediation Each chapter is richly illustrated and includes an extensive list of references to guide you toward further research. Combining bionanomaterial development and applications, the book clearly demonstrates the importance of these materials to biotechnology, biomedicine, and environmental remediation. It offers an accessible overview for students, industrial researchers, pharmaceutical innovators, medical and public health personnel, environmental scientists and engineers, and anyone interested in this interdisciplinary field.

Download or read book Nanoscience written by Victor M. Starov and published by CRC Press. This book was released on 2011-06-03 with total page 1610 pages. Available in PDF, EPUB and Kindle. Book excerpt: The common perception is that nanoscience is something entirely new, that it sprung forth whole and fully formed like some mythological deity. But the truth is that like all things scientific, nanoscience is the natural result of the long evolution of scientific inquiry. Following a historical trail back to the middle of the 19th century, nanoscience is the inborn property of colloid and interface science. What’s important today is for us to recognize that nanoparticles are small colloidal objects. It should also be appreciated that over the past decades, a number of novel nanostructures have been developed, but whatever we call them, we cannot forget that their properties and behavior are still in the realm of colloid and interface science. However one views it, the interest and funding in nano-science is a tremendous opportunity to advance critical research in colloid chemistry. Nanoscience: Colloidal and Interfacial Aspects brings together a prominent roster of 42 leading investigators and their teams, who detail the wide range of theoretical and experimental knowledge that can be successfully applied for investigating nanosystems, many of which are actually well-known colloidal systems. This international grouping of pioneering investigators from academia and industry use these pages to provide researchers of today and tomorrow with a full examination of nano-disperse colloids, homogeneous and heterogeneous nano-structured materials (and their properties), and shelf-organization at the nano-scale. This cutting-edge reference provides information on investigations into non-linear electrokinetic phenomena in nano-sized dispersions and nano-sized biological systems. It discusses application aspects of technological processes in great detail, providing scientists and engineers across all fields with authoritative commentary on colloid and interface science operating at the nanoscale. Nano-Science: Colloidal and Interfacial Aspects provides an authoritative resource for those wanting to familiarize themselves with current progress as well as for those looking to make their own impact on the development of new technologies and practical applications in fields as diverse as medicine, materials, and environmental science to name but a few. Whether you call the technology nano or colloids, the field continues to be ripe with opportunity.

Download or read book Electron Paramagnetic Resonance in Modern Carbon Based Nanomaterials written by Dariya Savchenko and published by Bentham Science Publishers. This book was released on 2018-06-05 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents information about several topics in the field of electron paramagnetic resonance (EPR) study of carbon-containing nanomaterials. It introduces the reader to an array of experimental and theoretical approaches for the analysis of paramagnetic centers (dangling bonds, interface defects, vacancies, and impurities) usually observed in modern carbon-containing materials such as nanographites, graphene, disordered onion-like carbon nanospheres (DOLCNS), single-walled carbon nanotubes (SWCNTs), multi-walled carbon nanotubes (MWCNT), graphene oxide (GO), reduced graphene oxide (rGO), nanodiamonds, silicon carbonitride (SiCN) and silicon carbide (SiC) based composites and thin films. In particular, the book describes in detail: • The fundamentals of EPR spectroscopy and its application to the carbon-containing materials; • The resolution of the EPR signals from different species in carbon materials; • EPR characterization of spin dynamics in carbon nanomaterials; • Magnetic properties of DWCNTs and MWCNTs polymer composites; • EPR investigations on GO, rGO and CNTs with different chemical functionalities; • EPR spectroscopy of semiconducting SWCNTs thin films and their transistors; • In-situ EPR investigations of the oxygenation processes in coal and graphene materials; • The two-temperature EPR measurement method applied to carbonaceous solids; • Characterization of impurities in nanodiamonds and SiC nanomaterials and related size effects by CW and pulse EPR techniques; • Application of multifrequency EPR to the study of paramagnetic defects in a-Si1-xCx:H thin films and a-SiCxNy based composites. This volume is a useful guide for researchers interested in the EPR study of paramagnetic centers in the carbon-containing thin films, nanomaterials, ceramics, etc. It is also a valuable teaching tool at graduate and postgraduate levels for advanced courses in analytical chemistry, applied sciences and spectroscopy.

Download or read book Nanotechnology for Sustainable Water Resources written by Ajay Kumar Mishra and published by John Wiley & Sons. This book was released on 2018-02-02 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, we have summarized recent progresses due to novel nanomaterials for sustainable water resources. Book provides a summary of the state of the art knowledge to scientists, engineers and policy makers, about recent developments due to nanotechnology for sustainable water resources arena. The advances in sustainable water resources technologies in the context of modern society’s interests will be considered preferably which allow to identify grand challenges and directions for future research. The book contributors have been selected from all over the world and the essential functions of the nanotechnologies have presented rather than their anticipated applications. Moreover, up to date knowledge on economy, toxicity and regulation related to nanotechnology are presented in detail. In the end, role of nanotechnology for green and sustainable future has also been briefly debated.

Download or read book Graphene Nanotubes and Quantum Dots Based Nanotechnology written by Yarub Al-Douri and published by Woodhead Publishing. This book was released on 2022-07-28 with total page 978 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive look combining experimental and theoretical approaches to graphene, nanotubes, and quantum dots-based nanotechnology evaluation and development are including a review of key applications. Graphene, nanotubes, and quantum dots-based nanotechnology review the fundamentals, processing methods, and applications of this key materials system. The topics addressed are comprehensive including synthesis, preparation, both physical and chemical properties, both accepted and novel processing methods, modeling, and simulation. The book provides fundamental information on key properties that impact performance, such as crystal structure and particle size, followed by different methods to analyze, measure, and evaluate graphene, nanotubes, and quantum dots-based nanotechnology and particles. Finally, important applications are covered, including different applications of biomedical, energy, electronics, etc. Graphene, nanotubes, and quantum dots-based nanotechnology is appropriate for those working in the disciplines of nanotechnology, materials science, chemistry, physics, biology, and medicine. - Provides a comprehensive overview of key topics both on the experimental side and the theoretical - Discusses important properties that impact graphene, nanotubes, and quantum dots performance, processing methods both novel and accepted and important applications - Reviews the most relevant applications, such as biomedical, energy, electronics, and materials ones