Download or read book Carbon Nanotube Reinforced Polymers written by Roham Rafiee and published by Elsevier. This book was released on 2017-10-06 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanotube-Reinforced Polymers: From Nanoscale to Macroscale addresses the advances in nanotechnology that have led to the development of a new class of composite materials known as CNT-reinforced polymers. The low density and high aspect ratio, together with their exceptional mechanical, electrical and thermal properties, render carbon nanotubes as a good reinforcing agent for composites. In addition, these simulation and modeling techniques play a significant role in characterizing their properties and understanding their mechanical behavior, and are thus discussed and demonstrated in this comprehensive book that presents the state-of-the-art research in the field of modeling, characterization and processing. The book separates the theoretical studies on the mechanical properties of CNTs and their composites into atomistic modeling and continuum mechanics-based approaches, including both analytical and numerical ones, along with multi-scale modeling techniques. Different efforts have been done in this field to address the mechanical behavior of isolated CNTs and their composites by numerous researchers, signaling that this area of study is ongoing. - Explains modeling approaches to carbon nanotubes, together with their application, strengths and limitations - Outlines the properties of different carbon nanotube-based composites, exploring how they are used in the mechanical and structural components - Analyzes the behavior of carbon nanotube-based composites in different conditions
Download or read book Carbon Nanotube Reinforced Composites written by Marcio Loos and published by Elsevier. This book was released on 2014-09-11 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanotube Reinforced Composites introduces a wide audience of engineers, scientists and product designers to this important and rapidly expanding class of high performance composites. Dr Loos provides readers with the scientific fundamentals of carbon nanotubes (CNTs), CNT composites and nanotechnology in a way which will enable them to understand the performance, capability and potential of the materials under discussion. He also investigates how CNT reinforcement can be used to enhance the mechanical, electrical and thermal properties of polymer composites. Production methods, processing technologies and applications are fully examined, with reference to relevant patents. Finally, health and safety issues related to the use of CNTs are investigated. Dr. Loos compares the theoretical expectations of using CNTs to the results obtained in labs, and explains the reasons for the discrepancy between theoretical and experimental results. This approach makes the book an essential reference and practical guide for engineers and product developers working with reinforced polymers – as well as researchers and students in polymer science, materials and nanotechnology. A wealth of applications information is included, taken from the wide range of industry sectors utilizing CNT reinforced composites, such as energy, coatings, defense, electronics, medical devices, and high performance sports equipment. - Introduces a wide range of readers involved in plastics engineering, product design and manufacturing to the relevant topics in nano-science, nanotechnology, nanotubes and composites. - Assesses effects of CNTs as reinforcing agents, both in a materials context and an applications setting. - Focuses on applications aspects – performance, cost, health and safety, etc – for a wide range of industry sectors, e.g. energy, coatings, defense, electronics, medical devices, high performance sports equipment, etc.
Download or read book Carbon Nanotube Polymer Composites written by Dimitrios Tasis and published by Royal Society of Chemistry. This book was released on 2015-11-09 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemically-modified carbon nanotubes (CNTs) exhibit a wide range of physical and chemical properties which makes them an attractive starting material for the preparation of super-strong and highly-conductive fibres and films. Much information is available across the primary literature, making it difficult to obtain an overall picture of the state-of-the-art. This volume brings together some of the leading researchers in the field from across the globe to present the potential these materials have, not only in developing and characterising novel materials but also the devices which can be fabricated from them. Topics featured in the book include Raman characterisation, industrial polymer materials, actuators and sensors and polymer reinforcement, with chapters prepared by highly-cited authors from across the globe. A valuable handbook for any academic or industrial laboratory, this book will appeal to newcomers to the field and established researchers alike.
Download or read book Carbon Nanotubes for Polymer Reinforcement written by Peng-Cheng Ma and published by CRC Press. This book was released on 2011-03-22 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discovered in the twentieth century, carbon nanotubes (CNT) were an integral part of science and industry by the beginning of the twenty first century, revolutionizing chemistry, physics, and materials science. More recent advances in carbon nanotube production methods have resulted in a tremendous push to incorporate CNTs into polymer matrices. Al
Download or read book Fundamentals of Conjugated Polymer Blends Copolymers and Composites written by Parveen Saini and published by John Wiley & Sons. This book was released on 2015-04-30 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since their discovery in 1977, the evolution of conducting polymers has revolutionized modern science and technology. These polymers enjoy a special status in the area of materials science yet they are not as popular among young readers or common people when compared to other materials like metals, paper, plastics, rubber, textiles, ceramics and composites like concrete. Most importantly, much of the available literature in the form of papers, specific review articles and books is targeted either at advanced readers (scientists / technologists / engineers / senior academicians) or for those who are already familiar with the topic (doctoral / postdoctoral scholars). For a beginner or even school / college students, such compilations are bit difficult to access / digest. In fact, they need proper introduction to the topic of conducting polymers including their discovery, preparation, properties, applications and societal impact, using suitable examples and already known principles/knowledge/phenomenon. Further, active participation of readers in terms of "question & answers", "fill-in-the-blanks", "numerical" along with suitable answer key is necessary to maintain the interest and to initiate the "thought process". The readers also need to know about the drawbacks and any hazards of such materials. Therefore, I believe that a comprehensive source on the science / technology of conducting polymers which maintains a link between grass root fundamentals and state-of-the-art R&D is still missing from the open literature.
Download or read book Heterogeneous Micro and Nanoscale Composites for the Catalysis of Organic Reactions written by Ali Maleki and published by Elsevier. This book was released on 2021-11-10 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heterogeneous Micro and Nanoscale Composites for the Catalysis of Organic Reactions discusses the major properties and applications of heterogeneous micro and nanoscale composites, including surface coating and functionalization capability, effective physical properties, recovery and reusability, biocompatibility and biodegradability. In addition, preparation strategies and essential analytical methods for the characterization of these materials are investigated. The effects of morphology, porosity and sizes of these composites on catalytic activity are also discussed. This book is an important reference source for materials engineers and chemical engineers who are interested in heterogeneous, thin-scaled materials and catalyzed organic synthesis reactions. In addition, this book will help researchers design novel structures and apply them in catalytic applications. - Provides information on the preparation, characterization and applications of catalysis of organic reactions - Outlines the major catalytic applications of heterogenous nanocomposites - Assesses the major challenges of manufacturing heterogenous nanocomposites on an industrial scale
Download or read book Carbon Nanotubes written by Mohamed Berber and published by BoD – Books on Demand. This book was released on 2016-07-20 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows the recent advances of the applications of carbon nanotubes (CNTs), in particular, the polymer functionalized carbon nanotubes. It also includes a comprehensive description of carbon nanotubes' preparation, properties, and characterization. Therefore, we have attempted to provide detailed information about the polymer-carbon nanotube composites. With regard to the unique structure and properties of carbon nanotubes, a series of important findings have been reported. The unique properties of carbon nanotubes, including thermal, mechanical, and electrical properties, after polymer functionalization have been documented in detail. This book comprises 18 chapters. The chapters include different applications of polymer functionalization CNTs, e.g. photovoltaic, biomedical, drug delivery, gene delivery, stem cell therapy, thermal therapy, biological detection and imaging, electroanalytical, energy, supercapacitor, and gas sensor applications.
Download or read book Carbon Nanotubes written by Arvind Agarwal and published by CRC Press. This book was released on 2018-09-03 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the Foreword, written by legendary nano pioneer M. Meyyappan, Chief Scientist for Exploration Technology NASA Ames Research Center, Moffett Field, California, USA: "...there is critical need for a book to summarize the status of the field but more importantly to lay out the principles behind the technology. This is what Professor Arvind Agarwal and his co-workers ... have done here." Carbon Nanotubes: Reinforced Metal Matrix Composites reflects the authors’ desire to share the benefits of nanotechnology with the masses by developing metal matrix carbon nanotube (MM-CNT) composites for large-scale applications. Multiwall carbon nanotubes can now be produced on a large scale and at a significantly reduced cost. The book explores potential applications and applies the author’s own research to highlight critical developmental issues for different MM-CNT composites—and then outline novel solutions. With this problem-solving approach, the book explores: Advantages, limitations, and the evolution of processing techniques used for MM-CNT composites Characterization techniques unique to the study of MM-CNT composites—and the limitations of these methods Existing research on different MM-CNT composites, presented in useful tables that include composition, processing method, quality of CNT dispersion, and properties The micro-mechanical strengthening that results from adding CNT The applicability of micro-mechanics models in MM-CNT composites Significance of chemical stability for carbon nanotubes in the metal matrix as a function of processing, and its impact on CNT/metal interface and mechanical properties Computational studies that have not been sufficiently covered although they are essential to research and development The critical issue of CNT dispersion in the metal matrix, as well as a unique way to quantify CNT distribution and subsequently improve control of the processing parameters for obtaining improved properties Carbon Nanotubes: Reinforced Metal Matrix Composites paints a vivid picture of scientific and application achievements in this field. Exploring the mechanisms through which CNTs are enhancing the properties of different metal-based composites, the authors provide a roadmap to help researchers develop MM-CNT composites and choose potential materials for use in emerging areas of technology.
Download or read book Modelling of Carbon Nanotubes and Carbon Nanotube reinforced Polymers with Applications to Composite Structures written by Justin Wuite and published by . This book was released on 2006 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Carbon Nanotube Polymer Composites written by Brian P. Grady and published by John Wiley & Sons. This book was released on 2011-07-08 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: The accessible compendium of polymers in carbon nanotubes (CNTs) Carbon nanotubes (CNTs)—extremely thin tubes only a few nanometers in diameter but able to attain lengths thousands of times greater—are prime candidates for use in the development of polymer composite materials. Bringing together thousands of disparate research works, Carbon Nanotube-Polymer Composites: Manufacture, Properties, and Applications covers CNT-polymers from synthesis to potential applications, presenting the basic science and engineering of this dynamic and complex area in an accessible, readable way. Designed to be of use to polymer scientists, engineers, chemists, physicists, and materials scientists, the book covers carbon nanotube fundamentals to help polymer experts understand CNTs, and polymer physics to help those in the CNT field, making it an invaluable resource for anyone working with CNT-polymer composites. Detailed chapters describe the mechanical, rheological, electrical, and thermal properties of carbon nanotube-polymer composites. Including a glossary that defines key terms, Carbon Nanotube-Polymer Composites is essential reading for anyone looking to gain a fundamental understanding of CNTs and polymers, as well as potential and current applications, including electronics (shielding and transparent electrodes), flame retardants, and electromechanics (sensors and actuators), and their challenges.
Download or read book Carbon Nanotube Based Composites written by Antonio Pantano and published by Smithers Rapra. This book was released on 2012-09-28 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes (CNTs) have amazing properties and a key way to take advantage of this is by incorporating nanotubes into a matrix to build composite materials. The best candidates for this task are undoubtedly polymers. Almost every characteristic of a polymer can be significantly enhanced by adding carbon nanotubes and as a result, new potential applications of carbon nanotube enhanced polymer composites are discovered every day. However, before carbon nanotube enhanced polymer composites become commonplace there are some tough challenges that need to be overcome. This book reviews the status of worldwide research in both single-walled and multi-walled carbon nanotube based composites. It serves as a practical guide on carbon nanotube based composites and a reference to students and researchers from the academia and industry.
Download or read book Carbon Containing Polymer Composites written by Mostafizur Rahaman and published by Springer. This book was released on 2018-10-05 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the methods synthesizing various carbon materials, like graphite, carbon blacks, carbon fibers, carbon nanotubes, and graphene. It also details different functionalization and modification processes used to improve the properties of these materials and composites. From a geometrical–structural point of view, it examines different properties of the composites, such as mechanical, electrical, dielectric, thermal, rheological, morphological, spectroscopic, electronic, optical, and toxic, and describes the effects of carbon types and their geometrical structure on the properties and applications of composites.
Download or read book Polymer Carbon Nanotube Composites written by Cor Koning and published by CRC Press. This book was released on 2012-04-11 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with a comprehensive toolbox for dispersing single-walled and multiwalled carbon nanotubes in thermoplastic polymer matrices. The book starts with an overview of all known techniques for dispersing CNTs in thermoplastic polymers and then concentrates on one of the most versatile techniques known nowadays: the so-called latex technology. Also discussed are the basic principles of this latex technology, the role of the matrix viscosity on percolation threshold, the importance of the intrinsic CNT quality, the use of "smart" surfactants facilitating electron transport in the final composite, the preparation of highly loaded master-batches, which can be diluted with virgin polymer by melt-extrusion, and some promising potential applications.
Download or read book Carbon Nanotubes and Graphene written by Kazuyoshi Tanaka and published by Newnes. This book was released on 2014-07-10 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanotubes and Graphene is a timely second edition of the original Science and Technology of Carbon Nanotubes. Updated to include expanded coverage of the preparation, purification, structural characterization, and common application areas of single- and multi-walled CNT structures, this work compares, contrasts, and, where appropriate, unitizes CNT to graphene. This much expanded second edition reference supports knowledge discovery, production of impactful carbon research, encourages transition between research fields, and aids the formation of emergent applications. New chapters encompass recent developments in the theoretical treatments of electronic and vibrational structures, and magnetic, optical, and electrical solid-state properties, providing a vital base to research. Current and potential applications of both materials, including the prospect for large-scale synthesis of graphene, biological structures, and flexible electronics, are also critically discussed. - Updated discussion of properties, structure, and morphology of biological and flexible electronic applications aids fundamental knowledge discovery - Innovative parallel focus on nanotubes and graphene enables you to learn from the successes and failures of, respectively, mature and emergent partner research disciplines - High-quality figures and tables on physical and mathematical applications expertly summarize key information – essential if you need quick, critically relevant data
Download or read book Stress Analysis of Fiber reinforced Composite Materials written by M. W. Hyer and published by DEStech Publications, Inc. This book was released on 2009 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated and improved, Stress Analysis of Fiber-Reinforced Composite Materials, Hyer's work remains the definitive introduction to the use of mechanics to understand stresses in composites caused by deformations, loading, and temperature changes. In contrast to a materials science approach, Hyer emphasizes the micromechanics of stress and deformation for composite material analysis. The book provides invaluable analytic tools for students and engineers seeking to understand composite properties and failure limits. A key feature is a series of analytic problems continuing throughout the text, starting from relatively simple problems, which are built up step-by-step with accompanying calculations. The problem series uses the same material properties, so the impact of the elastic and thermal expansion properties for a single-layer of FR material on the stress, strains, elastic properties, thermal expansion and failure stress of cross-ply and angle-ply symmetric and unsymmetric laminates can be evaluated. The book shows how thermally induced stresses and strains due to curing, add to or subtract from those due to applied loads.Another important element, and one unique to this book, is an emphasis on the difference between specifying the applied loads, i.e., force and moment results, often the case in practice, versus specifying strains and curvatures and determining the subsequent stresses and force and moment results. This represents a fundamental distinction in solid mechanics.
Download or read book Fundamental Study of the Machinability of Carbon Nanotube Reinforced Polymer Composites written by Johnson Samuel and published by . This book was released on 2009 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effective manufacturing of micro/meso-scale parts and products using carbon nanotube (CNT) composites requires a knowledge base that will enable the design of these composites to meet both the micro-scale engineering and manufacturing requirements. This research has sought to understand the effect of CNTs on the machining performance of CNT composites and to identify critical microstructural parameters that influence their machinability.
Download or read book Carbon Nanotubes written by Siva Yellampalli and published by BoD – Books on Demand. This book was released on 2011-08-17 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer nanocomposites are a class of material with a great deal of promise for potential applications in various industries ranging from construction to aerospace. The main difference between polymeric nanocomposites and conventional composites is the filler that is being used for reinforcement. In the nanocomposites the reinforcement is on the order of nanometer that leads to a very different final macroscopic property. Due to this unique feature polymeric nanocomposites have been studied exclusively in the last decade using various nanofillers such as minerals, sheets or fibers. This books focuses on the preparation and property analysis of polymer nanocomposites with CNTs (fibers) as nano fillers. The book has been divided into three sections. The first section deals with fabrication and property analysis of new carbon nanotube structures. The second section deals with preparation and characterization of polymer composites with CNTs followed by the various applications of polymers with CNTs in the third section.
