Download or read book Carbon Dioxide Flooding Basic Mechanisms and Project Design written by Mark A. Klins and published by Springer. This book was released on 1984-09-10 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heavy Crude Oil Recovery written by E. Okandan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: Within the last 10 years the world has come to a point where the easily explorable oil deposits have now been found, and it is anticipated that such deposits will be depleted by the beginning of the Twenty-first Century. However, the increasing demand of man kind for energy has caused technologists to look into ways of find ing new sources or to reevaluat:e unconventional sources which, in the past, have not been economical. In this respect, heavy crude and tar sand oils are becoming important in fulfilling the world's energy requirements. What are heavy crude and tar sand oils? There is still some confusion as to their definitions, inasmuch as they vary among organizations and countries. In an effort to set agreed meanings, UNITAR, in a meeting in February 1982 in Venezuela, proposed the following definitions (see also Table 1): 1. Heavy crude oil and tar sand oil are petroleum or petroleum like liquids or semi-solids naturally occurring in porous media. The porous media are sands, sandstone, and carbonate rocks. 2. These oils will be characterized by viscosity and density. Viscosity will be used to define heavy crude oil and tar sand oil, and density (oAPI) will be used when viscosity measurements are not available. 3. Heavy crude oil has a gas-free viscosity of 100-10000 mPa.s (cp) 3 o at reservoir temperatures, or a density of 943 kg/m (20 API) 3 o o to 1000 kg/m (10 API) at 15.6 C and at atmospheric oressure.
Download or read book Target Reservoirs for CO2 Miscible Flooding written by John H. Goodrich and published by . This book was released on 1980 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Carbon Capture Utilization and Sequestration written by Ramesh K. Agarwal and published by BoD – Books on Demand. This book was released on 2018-09-12 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is divided in two sections. Several chapters in the first section provide a state-of-the-art review of various carbon sinks for CO2 sequestration such as soil and oceans. Other chapters discuss the carbon sequestration achieved by storage in kerogen nanopores, CO2 miscible flooding and generation of energy efficient solvents for postcombustion CO2 capture. The chapters in the second section focus on monitoring and tracking of CO2 migration in various types of storage sites, as well as important physical parameters relevant to sequestration. Both researchers and students should find the material useful in their work.
Download or read book Gas Injection into Geological Formations and Related Topics written by Alice Wu and published by John Wiley & Sons. This book was released on 2020-04-21 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the eighth volume in the series, Advances in Natural Gas Engineering, focusing on gas injection into geological formations and other related topics, very important areas of natural gas engineering. This volume includes information for both upstream and downstream operations, including chapters detailing the most cutting-edge techniques in acid gas injection, carbon capture, chemical and thermodynamic models, and much more. Written by some of the most well-known and respected chemical and process engineers working with natural gas today, the chapters in this important volume represent the most state-of-the-art processes and operations being used in the field. Not available anywhere else, this volume is a must-have for any chemical engineer, chemist, or process engineer in the industry. Advances in Natural Gas Engineering is an ongoing series of books meant to form the basis for the working library of any engineer working in natural gas today.
Download or read book Status of the Carbon Dioxide Miscible Flooding Method of Enhanced Oil Recovery in the United States written by David W. Bradbury and published by . This book was released on 1985 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Carbon Dioxide Miscible Flooding written by Gregory Lynn Andrews and published by . This book was released on 1985 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Carbon Dioxide Miscible Flooding written by Bernard Michel Lescure and published by . This book was released on 1990 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Miscible Displacement written by Fred I. Stalkup and published by . This book was released on 1983 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book FIELD DEMONSTRATION OF CARBON DIOXIDE MISCIBLE FLOODING IN THE LANSING KANSAS CITY FORMATION CENTRAL KANSAS written by G. Paul Willhite and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A pilot carbon dioxide miscible flood was initiated in the Lansing Kansas City C formation in the Hall Gurney Field, Russell County, Kansas. The reservoir zone is an oomoldic carbonate located at a depth of about 2900 feet. The pilot consists of one carbon dioxide injection well and two production wells on about 10 acre spacing. Continuous carbon dioxide injection began on December 2, 2003. By the end of June 2005, 16.19 MM lb of carbon dioxide were injected into the pilot area. Injection was converted to water on June 21, 2005 to reduce operating costs to a breakeven level with the expectation that sufficient carbon dioxide has been injected to displace the oil bank to the production wells by water injection. Wells in the pilot area produced 100% water at the beginning of the flood. Oil production began in February 2004, increasing to an average of about 3.78 B/D for the six month period between January 1 and June 30, 2005 before declining. By June 30, 2006, 41,566 bbls of water were injected into CO2I-1 and 2,726 bbl of oil were produced from the pilot. Injection rates into CO2I-1 declined with time, dropping to an unacceptable level for the project. The injection pressure was increased to reach a stable water injection rate of 100 B/D. However, the injection rate continued to decline with time, suggesting that water was being injected into a region with limited leakoff and production. Oil production rates remained in the range of 3-3.5 B/D following conversion to water injection. Oil rates increased from about 3.3 B/D for the period from January through March to about 4.7 B/D for the period from April through June. If the oil rate is sustained, this may be the first indication of the arrival of the oil bank mobilized by carbon dioxide injection. A sustained fluid withdrawal rate of about 200 B/D from CO2 No. 12 and CO2 No. 13 appears to be necessary to obtain higher oil rates. There is no evidence that the oil bank generated by injection of carbon dioxide has reached either production well. Water injection will continue to displace oil mobilized by carbon dioxide to the production wells and to maintain the pressure in the PPV region at a level that supports continued miscible displacement as the carbon dioxide is displaced by the injected water.
Download or read book Optimal Control Policies for Carbon Dioxide Miscible Flooding Enhanced Oil Recovery written by Gregory John Mehos and published by . This book was released on 1986 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Equations of State and PVT Analysis written by Tarek Ahmed and published by Gulf Professional Publishing. This book was released on 2016-03-02 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the properties of a reservoir’s fluids and creating a successful model based on lab data and calculation are required for every reservoir engineer in oil and gas today, and with reservoirs becoming more complex, engineers and managers are back to reinforcing the fundamentals. PVT (pressure-volume-temperature) reports are one way to achieve better parameters, and Equations of State and PVT Analysis, Second Edition, helps engineers to fine tune their reservoir problem-solving skills and achieve better modeling and maximum asset development. Designed for training sessions for new and existing engineers, Equations of State and PVT Analysis, Second Edition, will prepare reservoir engineers for complex hydrocarbon and natural gas systems with more sophisticated EOS models, correlations and examples from the hottest locations around the world such as the Gulf of Mexico, North Sea and China, and Q&A at the end of each chapter. Resources are maximized with this must-have reference. Improve with new material on practical applications, lab analysis, and real-world sampling from wells to gain better understanding of PVT properties for crude and natural gas Sharpen your reservoir models with added content on how to tune EOS parameters accurately Solve more unconventional problems with field examples on phase behavior characteristics of shale and heavy oil
Download or read book Carbon Dioxide Chemistry Capture and Oil Recovery written by Iyad Karamé and published by BoD – Books on Demand. This book was released on 2018-08-16 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fossil fuels still need to meet the growing demand of global economic development, yet they are often considered as one of the main sources of the CO2 release in the atmosphere. CO2, which is the primary greenhouse gas (GHG), is periodically exchanged among the land surface, ocean, and atmosphere where various creatures absorb and produce it daily. However, the balanced processes of producing and consuming the CO2 by nature are unfortunately faced by the anthropogenic release of CO2. Decreasing the emissions of these greenhouse gases is becoming more urgent. Therefore, carbon sequestration and storage (CSS) of CO2, its utilization in oil recovery, as well as its conversion into fuels and chemicals emerge as active options and potential strategies to mitigate CO2 emissions and climate change, energy crises, and challenges in the storage of energy.
Download or read book Polymer Improved Oil Recovery written by K.S. Sorbie and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of oil in the world economy cannot be overstated, and methods for recovering oil will be the subject of much scientific and engineering research for many years to come. Even after the application of primary depletion and secondary recovery processes (usually waterflooding), much oil usually remains in a reservoir, and indeed in some heterogeneous reservoir systems as much as 70% of the original oil may remain. Thus, there is an enormous incentive for the development of improved or enhanced methods of oil recovery, aimed at recovering some portion of this remainil)g oil. The techniques used range from 'improved' secondary flooding methods (including polymer and certain gas injection processes) through to 'enhanced' or 'tertiary' methods such as chemical (surfactant, caustic, foam), gas miscible (carbon dioxide, gas reinjection) and thermal (steam soak and drive, in-situ combustion). The distinction between the classification ofthe methods usually refers to the target oil that the process seeks to recover. That is, in 'improved' recovery we are usually aiming to increase the oil sweep efficiency, whereas in 'tertiary' recovery we aim to mobilise and recover residual or capillary trapped oil. There are a few books and collections of articles which give general overviews of improved and enhanced oil recovery methods. However, for each recovery method, there is such a wide range of interconnected issues concerning the chemistry, physics and fluid mechanics of flow in porous media, that rarely are these adequately reviewed.
Download or read book Carbon Sequestration Atlas of the United States and Canada written by and published by . This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reservoir Formation Damage written by Faruk Civan and published by Elsevier. This book was released on 2011-08-30 with total page 1135 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reservoir Formation Damage, Second edition is a comprehensive treatise of the theory and modeling of common formation damage problems and is an important guide for research and development, laboratory testing for diagnosis and effective treatment, and tailor-fit- design of optimal strategies for mitigation of reservoir formation damage. The new edition includes field case histories and simulated scenarios demonstrating the consequences of formation damage in petroleum reservoirsFaruk Civan, Ph.D., is an Alumni Chair Professor in the Mewbourne School of Petroleum and Geological Engineering at the University of Oklahoma in Norman. Dr. Civan has received numerous honors and awards, including five distinguished lectureship awards and the 2003 SPE Distinguished Achievement Award for Petroleum Engineering Faculty. Petroleum engineers and managers get critical material on evaluation, prevention, and remediation of formation damage which can save or cost millions in profits from a mechanistic point of view State-of-the-Art knowledge and valuable insights into the nature of processes and operational practices causing formation damage Provides new strategies designed to minimize the impact of and avoid formation damage in petroleum reservoirs with the newest drilling, monitoring, and detection techniques
Download or read book Carbon Dioxide Miscible Flooding written by James Catherwood and published by . This book was released on 1996* with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
