Download or read book Advances in Bioceramics and Porous Ceramics II Volume 30 Issue 6 written by Roger Narayan and published by John Wiley & Sons. This book was released on 2009-12-22 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Improve your understanding in the most valuable aspects of advances in bioceramics and porous ceramics. This collection of logically organized and carefully selected articles contain the proceedings of the “Porous Ceramics: Novel Developments and Applications” and “Next Generation Bioceramics” symposia, which were held on January 27-February 1, 2008.
Download or read book Nanoporous Materials for Gas Storage written by Katsumi Kaneko and published by Springer. This book was released on 2019-04-27 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows the promising future and essential issues on the storage of the supercritical gases, including hydrogen, methane and carbon dioxide, by adsorption with controlling the gas-solid interaction by use of designed nanoporous materials. It explains the reason why the storage of these gases with adsorption is difficult from the fundamentals in terms of gas-solid interaction. It consists of 14 chapters which describe fundamentals, application, key nanoporous materials (nanoporous carbon, metal organic frame works, zeolites) and their storage performance for hydrogen, methane, and carbon dioxide. Thus, this book appeals to a wide readership of the academic and industrial researchers and it can also be used in the classroom for graduate students focusing on clean energy technology, green chemistry, energy conversion and storage, chemical engineering, nanomaterials science and technology, surface and interface science, adsorption science and technology, carbon science and technology, metal organic framework science, zeolite science, nanoporous materials science, nanotechnology, environmental protection, and gas sensors.
Download or read book Handbook of Nanophysics written by Klaus D. Sattler and published by CRC Press. This book was released on 2010-09-17 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Nanophysics: Functional Nanomaterials illustrates the importance of tailoring nanomaterials to achieve desired functions in applications. Each peer-reviewed chapter contains a broad-based introduction and enhances understanding of the state-of-the-art scientific content through fundamental equations and illustrations, some in color.This
Download or read book Nanocarbons for Energy Conversion Supramolecular Approaches written by Naotoshi Nakashima and published by Springer. This book was released on 2018-08-13 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on nanocarbons (carbon nanotubes, graphene, nanoporous carbon, and carbon black) and related materials for energy conversion, including fuel cells (predominately proton exchange membrane fuel cells [PEMFC]), Li-ion batteries, and supercapacitors. Written by a group of internationally recognized researchers, it offers an in-depth review of the structure, properties, and functions of nanocarbons, and summarizes recent advances in the design, fabrication and characterization of nanocarbon-based catalysts for energy applications. As such, it is an invaluable resource for graduate students, academics and industrial scientists interested in the areas of nanocarbons, energy materials for fuel cells, batteries and supercapacitors as well as materials design, and supramolecular science.
Download or read book Introduction to Reticular Chemistry written by Omar M. Yaghi and published by John Wiley & Sons. This book was released on 2019-03-22 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt: A concise introduction to the chemistry and design principles behind important metal-organic frameworks and related porous materials Reticular chemistry has been applied to synthesize new classes of porous materials that are successfully used for myraid applications in areas such as gas separation, catalysis, energy, and electronics. Introduction to Reticular Chemistry gives an unique overview of the principles of the chemistry behind metal-organic frameworks (MOFs), covalent organic frameworks (COFs), and zeolitic imidazolate frameworks (ZIFs). Written by one of the pioneers in the field, this book covers all important aspects of reticular chemistry, including design and synthesis, properties and characterization, as well as current and future applications Designed to be an accessible resource, the book is written in an easy-to-understand style. It includes an extensive bibliography, and offers figures and videos of crystal structures that are available as an electronic supplement. Introduction to Reticular Chemistry: -Describes the underlying principles and design elements for the synthesis of important metal-organic frameworks (MOFs) and related materials -Discusses both real-life and future applications in various fields, such as clean energy and water adsorption -Offers all graphic material on a companion website -Provides first-hand knowledge by Omar Yaghi, one of the pioneers in the field, and his team. Aimed at graduate students in chemistry, structural chemists, inorganic chemists, organic chemists, catalytic chemists, and others, Introduction to Reticular Chemistry is a groundbreaking book that explores the chemistry principles and applications of MOFs, COFs, and ZIFs.
Download or read book Fabrication of Metal Organic Framework Derived Nanomaterials and Their Electrochemical Applications written by Wei Xia and published by Springer. This book was released on 2018-04-03 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis systematically introduces readers to a new metal-organic framework approach to fabricating nanostructured materials for electrochemical applications. Based on the metal-organic framework (MOF) approach, it also demonstrates the latest ideas on how to create optimal MOF and MOF-derived nanomaterials for electrochemical reactions under controlled conditions. The thesis offers a valuable resource for researchers who want to understand electrochemical reactions at nanoscale and optimize materials from rational design to achieve enhanced electrochemical performance. It also serves as a useful reference guide to fundamental research on advanced electrochemical energy storage materials and the synthesis of nanostructured materials.
Download or read book Carbon Nanomaterials written by Yury Gogotsi and published by CRC Press. This book was released on 2013-10-24 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides information on synthesis, properties, and applications of carbon nanomaterials. With novel materials, such as graphene (atomically flat carbon) or carbon onions (carbon nanospheres), the family of carbon nanomaterials is rapidly growing. This book provides a state-of-the-art overview and in-depth analysis of the most important ca
Download or read book Porous Carbons written by Feiyu Kang and published by Elsevier. This book was released on 2021-11-04 with total page 874 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon materials form pores ranging in size and morphology, from micropores of less than 1nm, to macropores of more than 50nm, and from channel-like spaces with homogenous diameters in carbon nanotubes, to round spaces in various fullerene cages, including irregularly-shaped pores in polycrystalline carbon materials. The large quantity and rapid rate of absorption of various molecules made possible by these attributes of carbon materials are now used in the storage of foreign atoms and ions for energy storage, conversion and adsorption, and for environmental remediation. Porous Carbons: Syntheses and Applications focuses on the fabrication and application of porous carbons. It considers fabrication at three scales: micropores, mesopores, and macropores. Carbon foams, sponges, and 3D-structured carbons are detailed. The title presents applications in four key areas: energy storage, energy conversion, energy adsorption, including batteries, supercapacitors, and fuel cells and environmental remediation, emphasizing the importance of pore structures at the three scales, and the diffusion and storage of various ions and molecules. The book presents a short history of each technique and material, and assesses advantages and disadvantages. This focused book provides researchers with a comprehensive understanding of both pioneering and current synthesis techniques for porous carbons, and their modern applications. - Presents modern porous carbon synthesis techniques and modern applications of porous carbons - Presents current research on porous carbons in energy storage, conversion and adsorption, and in environmental remediation - Provides a history and assessment of both pioneering and current cutting-edge synthesis techniques and materials - Covers a significant range of precursor materials, preparation techniques, and characteristics - Considers the future development of porous carbons and their various potential applications
Download or read book Gas Adsorption Equilibria written by Jürgen U. Keller and published by Springer Science & Business Media. This book was released on 2006-06-23 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to present for the first time experimental methods to measure equilibria states of pure and mixed gases being adsorbed on the surface of solid materials. It has been written for engineers and scientists from industry and academia who are interested in adsorption based gas separation processes and/or in using gas adsorption for characterization of the porosity of solid materials. This book is the result of a fruitful collaboration of a theoretician (JUK) and an experimentalist (RS) over more than twelve years in the field of gas adsorption systems at the Institute of Fluid- and Thermodynamics (IFT) at the University of Siegen, Siegen, Germany. This collaboration resulted in the development of several new methods to measure not only pure gas adsorption, but gas mixture or coadsorption equilibria on inert porous solids. Also several new theoretical results could be achieved leading to new types of so-called adsorption isotherms based on the concepts of molecular association and – phenomenologically speaking – on that of thermodynamic phases of fractal dimension. Naturally, results of international collaboration of the authors over the years (1980-2000) also are included.
Download or read book Porous Materials written by Juan Carlos Moreno-Piraján and published by Springer Nature. This book was released on 2021-03-10 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is written in honor of Prof. Francisco Rodriguez-Reinoso, who has made significant contributions in the area of porous materials such as active carbons and graphenes. It details the preparation of porous materials, including carbonaceous, zeolitic, and siliceous materials, MOFs, aerogels, and xerogels, describing the characterization techniques and the interpretation of the results, and highlighting common errors that can occur during the process. This book subsequently presents the use of modeling based on thermodynamics to describe the materials. Lastly, it illustrates a number of current environmental protection applications in the context of both water and air.
Download or read book Science written by John Michels (Journalist) and published by . This book was released on 2006 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt: A weekly record of scientific progress.
Download or read book Understanding Properties of Atoms Molecules and Materials written by Pranab Sarkar and published by CRC Press. This book was released on 2022-02-17 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a technology driven civilization the quest for new and smarter materials is everlasting. They are required as platforms for developing new technologies or for improving an already existing technology. The discovery of a new material is no longer chance driven or accidental, but is based on careful reasoning structured by deep understanding of the microconstituents of materials - the atoms and molecules in isolation or in an assembly. That requires fair amount of exposure to quantum and statistical mechanics. `Understanding Properties of Atoms, Molecules and Materials' is an effort (perhaps the first ever) to bring all the necessary theoretical ingredients and relevant physical information in a single volume. The book introduces the readers (first year graduates) or researchers in material chemistry/engineering to elementary quantum mechanics of atoms, molecules and solids and then goes on to make them acquainted with methods of statistical mechanics (classical as well as quantum) along with elementary principles of classical MD simulation. The basic concepts are introduced with clarity and illustrated with easy to grasp examples, thus preparing the readers for an exploration through the world of materials - the exotic and the mundane. The emphasis has been on the phenomena and what shapes them at the fundamental level. A comprehensive description of modern designing principles for materials with examples is a unique feature of the book. The highlights of the book are comprehensive introduction and analysis of Quantum states of atoms and molecules The translational symmetry and quantum states in periodic and amorphous solids Band structure and tuning Classical and quantum statistics with applications to ideal gases (photons, phonons and electrons, molecules) Quantum states in type-I and type-II superconductors (elementary theory included) Magnetic materials, materials with GMR and CMR Shape memory effects in alloys and materials 2D materials (graphene and graphene analogus) NLO and photovoltaic materials Hydrogen storage material for mitigating the looming energy crisis Quantum states in low and high band gap semiconductors Semimetals Designer materials, etc. The volume is designed and organized to create interest in the science of materials and the silent revolution that is redefining the goals and boundaries of materials science continuously.
Download or read book Small Angle X ray Scattering written by O. Glatter and published by . This book was released on 1982 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Organic Polymers written by Arpit Sand and published by BoD – Books on Demand. This book was released on 2020-03-11 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, Organic Polymers, covers aspects that are of immediate concern to a new entrant to the field of polymers. Taken as a whole, these eight chapters aim to help the readers easily assimilate other specialized and exhaustive treatises on the subject. Topics dealing with the chemistry and technology of polymers are presented in a careful and logical manner so as to provide an easy and enjoyable read. Several examples and analogies are included so to make the main concepts easy to follow and tables and figures are included so that the book can serve, to a limited extent, as a hand book dealing with polysaccharides with different parameters. This book is meant for students studying polysaccharides and those working on graft copolymers and other allied polymer industries but without a formal educational background in organic polymers.
Download or read book Carbon Nanofibers written by Madhuri Sharon and published by John Wiley & Sons. This book was released on 2021-02-09 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the fundamentals and applications of Carbon Nanofiber (CNF). In the first section, the initial chapter on the fundamentals of CNF is by Professor Maheshwar Sharon, the recognized “Father of Carbon Nanotechnology in India”, which powerfully provides a succinct overview of CNFs. This is followed by a chapter on biogenics that have produced unique morphologies of CNF that makes them suitable to various applications. This is followed by a chapter that mainly focuses on nanocomposites, especially those involving nanocomposites of CNF. The role of nanocatalysts and composites in promoting and enhancing the synthesis and application of CNF is then covered, followed by an important chapter on the characterization of CNF. The second section of the book encompasses the various applications of CNF, such as its use as a possible superconductor to adsorb and store hydrogen, and as a microwave absorber. The application of CNF for environmental concerns is also detailed by assessing its usefulness in dye and heavy metal removal from polluted water. The applications that are addressed include lithium-ion battery, solar cell, antenna, cosmetics, usefulness in regenerative medicine, as well as various aspects of agrotechnology.
Download or read book Nanocarbon Electrochemistry written by Nianjun Yang and published by John Wiley & Sons. This book was released on 2019-11-14 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a comprehensive introduction to the field of nanocarbon electrochemistry The discoveries of new carbon materials such as fullerene, graphene, carbon nanotubes, graphene nanoribbon, carbon dots, and graphdiyne have triggered numerous research advances in the field of electrochemistry. This book brings together up-to-date accounts of the recent progress, developments, and achievements in the electrochemistry of different carbon materials, focusing on their unique properties and various applications. Nanocarbon Electrochemistry begins by looking at the studies of heterogeneous electron transfer at various carbon electrodes when redox-active molecules are reversibly and specifically adsorbed on the carbon electrode surface. It then covers electrochemical energy storage applications of various carbon materials, particularly the construction and performance of supercapacitors and batteries by use of graphene and related materials. Next, it concentrates on electrochemical energy conversion applications where electrocatalysis at 0D, 1D, 2D, and 3D carbon materials nanocarbon materials is highlighted. The book finishes with an examination of the contents of electrogenerated chemiluminescence and photoelectrochemical pollutant degradation by use of diamond and related carbon materials. Covers the fundamental properties of different carbon materials and their applications across a wide range of areas Provides sufficient background regarding different applications, which contributes to the understanding of specialists and non-specialists Examines nanoelectrochemistry of adsorption-coupled electron transfer at carbon electrodes; graphene and graphene related materials; diamond electrodes for the electrogenerated chemiluminescence; and more Features contributions from an international team of distinguished researchers Nanocarbon Electrochemistry is an ideal book for students, researchers, and industrial partners working on many diverse fields of electrochemistry, whether they already make frequent use of carbon electrodes in one form of another or are looking at electrodes for new applications.
Download or read book 18th World Hydrogen Energy Conference 2010 WHEC 2010 written by Detlef Stolten and published by Forschungszentrum Jülich. This book was released on 2012 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt:
