Download or read book MOSFET Modeling for Circuit Analysis and Design written by Carlos Galup-Montoro and published by World Scientific. This book was released on 2007 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book dedicated to the next generation of MOSFET models. Addressed to circuit designers with an in-depth treatment that appeals to device specialists, the book presents a fresh view of compact modeling, having completely abandoned the regional modeling approach.Both an overview of the basic physics theory required to build compact MOSFET models and a unified treatment of inversion-charge and surface-potential models are provided. The needs of digital, analog and RF designers as regards the availability of simple equations for circuit designs are taken into account. Compact expressions for hand analysis or for automatic synthesis, valid in all operating regions, are presented throughout the book. All the main expressions for computer simulation used in the new generation compact models are derived.Since designers in advanced technologies are increasingly concerned with fluctuations, the modeling of fluctuations is strongly emphasized. A unified approach for both space (matching) and time (noise) fluctuations is introduced.

Download or read book Fundamentals of Bias Temperature Instability in MOS Transistors written by Souvik Mahapatra and published by Springer. This book was released on 2016-10-23 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to cover different aspects of Bias Temperature Instability (BTI). BTI remains as an important reliability concern for CMOS transistors and circuits. Development of BTI resilient technology relies on utilizing artefact-free stress and measurement methods and suitable physics-based models for accurate determination of degradation at end-of-life and understanding the gate insulator process impact on BTI. This book discusses different ultra-fast characterization techniques for recovery artefact free BTI measurements. It also covers different direct measurements techniques to access pre-existing and newly generated gate insulator traps responsible for BTI. The book provides a consistent physical framework for NBTI and PBTI respectively for p- and n- channel MOSFETs, consisting of trap generation and trapping. A physics-based compact model is presented to estimate measured BTI degradation in planar Si MOSFETs having differently processed SiON and HKMG gate insulators, in planar SiGe MOSFETs and also in Si FinFETs. The contents also include a detailed investigation of the gate insulator process dependence of BTI in differently processed SiON and HKMG MOSFETs. The book then goes on to discuss Reaction-Diffusion (RD) model to estimate generation of new traps for DC and AC NBTI stress and Transient Trap Occupancy Model (TTOM) to estimate charge occupancy of generated traps and their contribution to BTI degradation. Finally, a comprehensive NBTI modeling framework including TTOM enabled RD model and hole trapping to predict time evolution of BTI degradation and recovery during and after DC stress for different stress and recovery biases and temperature, during consecutive arbitrary stress and recovery cycles and during AC stress at different frequency and duty cycle. The contents of this book should prove useful to academia and professionals alike.

Download or read book Planar Double Gate Transistor written by Amara Amara and published by Springer Science & Business Media. This book was released on 2009-01-16 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until the 1990s, the reduction of the minimum feature sizes used to fabricate in- grated circuits, called “scaling”, has highlighted serious advantages as integration density, speed, power consumption, functionality and cost. Direct consequence was the decrease of cost-per-function, so the electronic productivity has largely progressed in this period. Another usually cited trend is the evolution of the in- gration density as expressed by the well-know Moore’s Law in 1975: the number of devices per chip doubles every 2 years. This evolution has allowed improving signi?cantly the circuit complexity, offering a great computing power in the case of microprocessor, for example. However, since few years, signi?cant issues appeared such as the increase of the circuit heating, device complexity, variability and dif?culties to improve the integration density. These new trends generate an important growth in development and production costs. Though is it, since 40 years, the evolution of the microelectronics always f- lowed the Moore’s law and each dif?culty has found a solution.

Download or read book MOSFET Models for VLSI Circuit Simulation written by Narain D. Arora and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Semiconductor (MOS) transistors are the basic building block ofMOS integrated circuits (I C). Very Large Scale Integrated (VLSI) circuits using MOS technology have emerged as the dominant technology in the semiconductor industry. Over the past decade, the complexity of MOS IC's has increased at an astonishing rate. This is realized mainly through the reduction of MOS transistor dimensions in addition to the improvements in processing. Today VLSI circuits with over 3 million transistors on a chip, with effective or electrical channel lengths of 0. 5 microns, are in volume production. Designing such complex chips is virtually impossible without simulation tools which help to predict circuit behavior before actual circuits are fabricated. However, the utility of simulators as a tool for the design and analysis of circuits depends on the adequacy of the device models used in the simulator. This problem is further aggravated by the technology trend towards smaller and smaller device dimensions which increases the complexity of the models. There is extensive literature available on modeling these short channel devices. However, there is a lot of confusion too. Often it is not clear what model to use and which model parameter values are important and how to determine them. After working over 15 years in the field of semiconductor device modeling, I have felt the need for a book which can fill the gap between the theory and the practice of MOS transistor modeling. This book is an attempt in that direction.

Download or read book FinFET Modeling for IC Simulation and Design written by Yogesh Singh Chauhan and published by Academic Press. This book was released on 2015-03-17 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first to explain FinFET modeling for IC simulation and the industry standard – BSIM-CMG - describing the rush in demand for advancing the technology from planar to 3D architecture, as now enabled by the approved industry standard. The book gives a strong foundation on the physics and operation of FinFET, details aspects of the BSIM-CMG model such as surface potential, charge and current calculations, and includes a dedicated chapter on parameter extraction procedures, providing a step-by-step approach for the efficient extraction of model parameters. With this book you will learn: - Why you should use FinFET - The physics and operation of FinFET - Details of the FinFET standard model (BSIM-CMG) - Parameter extraction in BSIM-CMG - FinFET circuit design and simulation - Authored by the lead inventor and developer of FinFET, and developers of the BSIM-CM standard model, providing an experts' insight into the specifications of the standard - The first book on the industry-standard FinFET model - BSIM-CMG

Download or read book Planar Double Gate Transistor written by Amara Amara and published by Springer. This book was released on 2009-08-29 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until the 1990s, the reduction of the minimum feature sizes used to fabricate in- grated circuits, called “scaling”, has highlighted serious advantages as integration density, speed, power consumption, functionality and cost. Direct consequence was the decrease of cost-per-function, so the electronic productivity has largely progressed in this period. Another usually cited trend is the evolution of the in- gration density as expressed by the well-know Moore’s Law in 1975: the number of devices per chip doubles every 2 years. This evolution has allowed improving signi?cantly the circuit complexity, offering a great computing power in the case of microprocessor, for example. However, since few years, signi?cant issues appeared such as the increase of the circuit heating, device complexity, variability and dif?culties to improve the integration density. These new trends generate an important growth in development and production costs. Though is it, since 40 years, the evolution of the microelectronics always f- lowed the Moore’s law and each dif?culty has found a solution.

Download or read book High Mobility and Quantum Well Transistors written by Geert Hellings and published by Springer Science & Business Media. This book was released on 2013-03-25 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: For many decades, the semiconductor industry has miniaturized transistors, delivering increased computing power to consumers at decreased cost. However, mere transistor downsizing does no longer provide the same improvements. One interesting option to further improve transistor characteristics is to use high mobility materials such as germanium and III-V materials. However, transistors have to be redesigned in order to fully benefit from these alternative materials. High Mobility and Quantum Well Transistors: Design and TCAD Simulation investigates planar bulk Germanium pFET technology in chapters 2-4, focusing on both the fabrication of such a technology and on the process and electrical TCAD simulation. Furthermore, this book shows that Quantum Well based transistors can leverage the benefits of these alternative materials, since they confine the charge carriers to the high-mobility material using a heterostructure. The design and fabrication of one particular transistor structure - the SiGe Implant-Free Quantum Well pFET – is discussed. Electrical testing shows remarkable short-channel performance and prototypes are found to be competitive with a state-of-the-art planar strained-silicon technology. High mobility channels, providing high drive current, and heterostructure confinement, providing good short-channel control, make a promising combination for future technology nodes.

Download or read book Transistor Level Modeling for Analog RF IC Design written by Wladyslaw Grabinski and published by Springer Science & Business Media. This book was released on 2006-07-01 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: The editors and authors present a wealth of knowledge regarding the most relevant aspects in the field of MOS transistor modeling. The variety of subjects and the high quality of content of this volume make it a reference document for researchers and users of MOSFET devices and models. The book can be recommended to everyone who is involved in compact model developments, numerical TCAD modeling, parameter extraction, space-level simulation or model standardization. The book will appeal equally to PhD students who want to understand the ins and outs of MOSFETs as well as to modeling designers working in the analog and high-frequency areas.

Download or read book Lateral Power Transistors in Integrated Circuits written by Tobias Erlbacher and published by Springer. This book was released on 2014-10-08 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book summarizes and compares recent advancements in the development of novel lateral power transistors (LDMOS devices) for integrated circuits in power electronic applications. In its first part, the book motivates the necessity for lateral power transistors by a top-down approach: First, it presents typical energy conversion applications in modern industrial, automotive and consumer electronics. Next, it introduces common circuit topologies suitable for these applications, and discusses the feasibility for monolithic integration. Finally, the combination of power and logic functionality on a single chip is motivated and the requirements and limitations for the power semiconductor devices are deduced. The second part describes the evolution of lateral power transistors over the past decades from the simple pin-type concept to double-acting RESURF topologies. It describes the principle of operation for these LDMOS devices and discusses limitations of lateral power devices. Moreover, figures-of-merit are presented which can be used to evaluate the performance of the novel lateral power transistors described in this book with respect to the LDMOS devices. In the last part, [..] the fundamental physical concepts including charge compensation and trench gate topologies are discussed. Also, the status of research in LDMOS devices on silicon carbide is presented. Advantages and drawbacks for each of these integration approaches are summarized, and the feasibility with respect to power electronic applications is evaluated.

Download or read book Bsim4 And Mosfet Modeling For Ic Simulation written by Chenming Hu and published by World Scientific. This book was released on 2011-11-25 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the art of advanced MOSFET modeling for integrated circuit simulation and design. It provides the essential mathematical and physical analyses of all the electrical, mechanical and thermal effects in MOS transistors relevant to the operation of integrated circuits. Particular emphasis is placed on how the BSIM model evolved into the first ever industry standard SPICE MOSFET model for circuit simulation and CMOS technology development.The discussion covers the theory and methodology of how a MOSFET model, or semiconductor device models in general, can be implemented to be robust and efficient, turning device physics theory into a production-worthy SPICE simulation model.Special attention is paid to MOSFET characterization and model parameter extraction methodologies, making the book particularly useful for those interested or already engaged in work in the areas of semiconductor devices, compact modeling for SPICE simulation, and integrated circuit design.

Download or read book BSIM Bulk MOSFET Model for IC Design Digital Analog RF and High Voltage written by Chenming Hu and published by Elsevier. This book was released on 2023-04-26 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: BSIM-Bulk MOSFET Model for IC Design - Digital, Analog, RF and High-Voltage provides in-depth knowledge of the internal operation of the model. The authors not only discuss the fundamental core of the model, but also provide details of the recent developments and new real-device effect models. In addition, the book covers the parameter extraction procedures, addressing geometrical scaling, temperatures, and more. There is also a dedicated chapter on extensive quality testing procedures and experimental results. This book discusses every aspect of the model in detail, and hence will be of significant use for the industry and academia. Those working in the semiconductor industry often run into a variety of problems like model non-convergence or non-physical simulation results. This is largely due to a limited understanding of the internal operations of the model as literature and technical manuals are insufficient. This also creates huge difficulty in developing their own IP models. Similarly, circuit designers and researcher across the globe need to know new features available to them so that the circuits can be more efficiently designed. - Reviews the latest advances in fabrication methods for metal chalcogenide-based biosensors - Discusses the parameters of biosensor devices to aid in materials selection - Provides readers with a look at the chemical and physical properties of reactive metals, noble metals, transition metals chalcogenides and their connection to biosensor device performance

Download or read book MOSFET Models for VLSI Circuit Simulation written by Narain Arora and published by Springer. This book was released on 1993-01-01 with total page 605 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book has 12 chapters. Starting from the overview of various aspects of device modeling for circuit simulators, a brief but complete review of seminconductor device physics and pn junction theory required for understanding MOSFET models is covered. The MOS transistor characteristics as applied to current MOS technologies are then discussed. First, the theory of MOS capacitors that is essential for understanding of MOS transistor models are discussed. This is followed by different types of MOSFET models such as threshold voltage, DC (steady-state), AC, and reliability models and the corresponding model parameter determination. The diode and MOSFET models as implemented in Berkeley SPICE, are also covered. Finally, the statistical variation of model parameters due to process variations are discussed.

Download or read book Compact Transistor Modelling for Circuit Design written by Henk C De Graaff and published by . This book was released on 1989-12-29 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Parasitic Substrate Coupling in High Voltage Integrated Circuits written by Pietro Buccella and published by Springer. This book was released on 2019-02-11 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces a new approach to model and predict substrate parasitic failures in integrated circuits with standard circuit design tools. The injection of majority and minority carriers in the substrate is a recurring problem in smart power ICs containing high voltage, high current switching devices besides sensitive control, protection and signal processing circuits. The injection of parasitic charges leads to the activation of substrate bipolar transistors. This book explores how these events can be evaluated for a wide range of circuit topologies. To this purpose, new generalized devices implemented in Verilog-A are used to model the substrate with standard circuit simulators. This approach was able to predict for the first time the activation of a latch-up in real circuits through post-layout SPICE simulation analysis. Discusses substrate modeling and circuit-level simulation of parasitic bipolar device coupling effects in integrated circuits; Includes circuit back-annotation of the parasitic lateral n-p-n and vertical p-n-p bipolar transistors in the substrate; Uses Spice for simulation and characterization of parasitic bipolar transistors, latch-up of the parasitic p-n-p-n structure, and electrostatic discharge (ESD) protection devices; Offers design guidelines to reduce couplings by adding specific protections.

Download or read book MOSFET Models for SPICE Simulation written by William Liu and published by Wiley-IEEE Press. This book was released on 2001-02-21 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: An expert guide to understanding and making optimum use of BSIM Used by more chip designers worldwide than any other comparable model, the Berkeley Short-Channel IGFET Model (BSIM) has, over the past few years, established itself as the de facto standard MOSFET SPICE model for circuit simulation and CMOS technology development. Yet, until now, there have been no independent expert guides or tutorials to supplement the various BSIM manuals currently available. Written by a noted expert in the field, this book fills that gap in the literature by providing a comprehensive guide to understanding and making optimal use of BSIM3 and BSIM4. Drawing upon his extensive experience designing with BSIM, William Liu provides a brief history of the model, discusses the various advantages of BSIM over other models, and explores the reasons why BSIM3 has been adopted by the majority of circuit manufacturers. He then provides engineers with the detailed practical information and guidance they need to master all of BSIM's features. He: Summarizes key BSIM3 components Represents the BSIM3 model with equivalent circuits for various operating conditions Provides a comprehensive glossary of modeling terminology Lists alphabetically BSIM3 parameters along with their meanings and relevant equations Explores BSIM3's flaws and provides improvement suggestions Describes all of BSIM4's improvements and new features Provides useful SPICE files, which are available online at the Wiley ftp site

Download or read book PHYSICS MODELING OF MOSFETS written by Tatsuya Ezaki and published by International Series on Advanc. This book was released on 2008-06 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides a timely description of the latest compact MOS transistor models for circuit simulation. The first generation BSIM3 and BSIM4 models that have dominated circuit simulation in the last decade are no longer capable of characterizing all the important features of modern sub-100nm MOS transistors. This book discusses the second generation MOS transistor models that are now in urgent demand and being brought into the initial phase of manufacturing applications. It considers how the models are to include the complete drift-diffusion theory using the surface potential variable in the MOS transistor channel in order to give one characterization equation.

Download or read book Leakage Current and Defect Characterization of Short Channel MOSFETs written by Guntrade Roll and published by . This book was released on 2012 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: