Download or read book Capacitance Spectroscopy of Semiconductors written by Jian V. Li and published by CRC Press. This book was released on 2018-07-06 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Capacitance spectroscopy refers to techniques for characterizing the electrical properties of semiconductor materials, junctions, and interfaces, all from the dependence of device capacitance on frequency, time, temperature, and electric potential. This book includes 15 chapters written by world-recognized, leading experts in the field, academia, national institutions, and industry, divided into four sections: Physics, Instrumentation, Applications, and Emerging Techniques. The first section establishes the fundamental framework relating capacitance and its allied concepts of conductance, admittance, and impedance to the electrical and optical properties of semiconductors. The second section reviews the electronic principles of capacitance measurements used by commercial products, as well as custom apparatus. The third section details the implementation in various scientific fields and industries, such as photovoltaics and electronic and optoelectronic devices. The last section presents the latest advances in capacitance-based electrical characterization aimed at reaching nanometer-scale resolution.
Download or read book Junction Capacitance Techniques to Characterize Radiation Damage in Silicon written by J. W. Diebold and published by . This book was released on 1973 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: Capacitance-voltage and transient capacitance measurements were made on Schottky barrier-on-phosphorus-doped silicon diodes. Energy levels, emission coefficients, and associated introduction rates were determined for defects produced by 1.0-MeV electrons, Co(60)-gamma rays, and 5-MeV neutrons. Total defect introduction rates agree well with carrier removal data of companion Hall effect samples. In the electron- and gamma-irradiated samples, specific introduction data reveal radiation-induced traps at E(c) - 0.24 eV, E(c) - 0.44 eV, and below midgap. The introduction rate of the traps located below midgap exhibits a strong dependence on donor concentration. In neutron-irradiated, float-zoned silicon a band of shallow trap levels is evident along with levels at E(c) - 0.37 eV, E(c) - 0.40 eV, and below midgap. In neutron-irradiated, crucible-grown silicon, trap levels are observed at E(c) - 0.18 eV, E(c) - 0.23 eV, E(c) - 0.24 eV, E(c) - 0.31 eV, and below midgap. (Author).
Download or read book Measurement of Liquid and Two phase Hydrogen Densities with a Capacitance Density Meter written by George E. Turney and published by . This book was released on 1969 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book University Physics written by Samuel J. Ling and published by . This book was released on 2017-12-19 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt: University Physics is designed for the two- or three-semester calculus-based physics course. The text has been developed to meet the scope and sequence of most university physics courses and provides a foundation for a career in mathematics, science, or engineering. The book provides an important opportunity for students to learn the core concepts of physics and understand how those concepts apply to their lives and to the world around them. Due to the comprehensive nature of the material, we are offering the book in three volumes for flexibility and efficiency. Coverage and Scope Our University Physics textbook adheres to the scope and sequence of most two- and three-semester physics courses nationwide. We have worked to make physics interesting and accessible to students while maintaining the mathematical rigor inherent in the subject. With this objective in mind, the content of this textbook has been developed and arranged to provide a logical progression from fundamental to more advanced concepts, building upon what students have already learned and emphasizing connections between topics and between theory and applications. The goal of each section is to enable students not just to recognize concepts, but to work with them in ways that will be useful in later courses and future careers. The organization and pedagogical features were developed and vetted with feedback from science educators dedicated to the project. VOLUME II Unit 1: Thermodynamics Chapter 1: Temperature and Heat Chapter 2: The Kinetic Theory of Gases Chapter 3: The First Law of Thermodynamics Chapter 4: The Second Law of Thermodynamics Unit 2: Electricity and Magnetism Chapter 5: Electric Charges and Fields Chapter 6: Gauss's Law Chapter 7: Electric Potential Chapter 8: Capacitance Chapter 9: Current and Resistance Chapter 10: Direct-Current Circuits Chapter 11: Magnetic Forces and Fields Chapter 12: Sources of Magnetic Fields Chapter 13: Electromagnetic Induction Chapter 14: Inductance Chapter 15: Alternating-Current Circuits Chapter 16: Electromagnetic Waves
Download or read book In place Recalibration Technique Applied to a Capacitance type System for Measuring Rotor Blade Clearance written by John P. Barranger and published by . This book was released on 1978 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book In place Recalibration Technique Applied to a Capacitance type System for Measuring Rotor Blade Tip Clearance written by John P. Barranger and published by . This book was released on 1978 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Negative Capacitance in Ferroelectric Materials written by Michael Hoffmann and published by . This book was released on 2020 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Bell System Technical Journal written by and published by . This book was released on 1926 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Experimental Electrical Engineering and Manual for Electrical Testing for Engineers and for Students in Engineering Laboratories written by Vladimir Karapetoff and published by . This book was released on 1927 with total page 662 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Digital CMOS Technology Circuits and Systems written by Karim Abbas and published by Springer Nature. This book was released on 2020-01-14 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive reference for everything that has to do with digital circuits. The author focuses equally on all levels of abstraction. He tells a bottom-up story from the physics level to the finished product level. The aim is to provide a full account of the experience of designing, fabricating, understanding, and testing a microchip. The content is structured to be very accessible and self-contained, allowing readers with diverse backgrounds to read as much or as little of the book as needed. Beyond a basic foundation of mathematics and physics, the book makes no assumptions about prior knowledge. This allows someone new to the field to read the book from the beginning. It also means that someone using the book as a reference will be able to answer their questions without referring to any external sources.
Download or read book Physics of Semiconductor Devices written by Simon M. Sze and published by John Wiley & Sons. This book was released on 2006-12-13 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Third Edition of the standard textbook and reference in the field of semiconductor devices This classic book has set the standard for advanced study and reference in the semiconductor device field. Now completely updated and reorganized to reflect the tremendous advances in device concepts and performance, this Third Edition remains the most detailed and exhaustive single source of information on the most important semiconductor devices. It gives readers immediate access to detailed descriptions of the underlying physics and performance characteristics of all major bipolar, field-effect, microwave, photonic, and sensor devices. Designed for graduate textbook adoptions and reference needs, this new edition includes: A complete update of the latest developments New devices such as three-dimensional MOSFETs, MODFETs, resonant-tunneling diodes, semiconductor sensors, quantum-cascade lasers, single-electron transistors, real-space transfer devices, and more Materials completely reorganized Problem sets at the end of each chapter All figures reproduced at the highest quality Physics of Semiconductor Devices, Third Edition offers engineers, research scientists, faculty, and students a practical basis for understanding the most important devices in use today and for evaluating future device performance and limitations. A Solutions Manual is available from the editorial department.
Download or read book Electrical Measurements in Practice written by Frank Malcolm Farmer and published by . This book was released on 1917 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Negative Capacitance Field Effect Transistors written by Young Suh Song and published by CRC Press. This book was released on 2023-10-31 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to provide information in the ever-growing field of low-power electronic devices and their applications in portable devices, wireless communication, sensor, and circuit domains. Negative Capacitance Field Effect Transistors: Physics, Design, Modeling and Applications discusses low-power semiconductor technology and addresses state-of-the-art techniques such as negative capacitance field effect transistors and tunnel field effect transistors. The book is split into three parts. The first part discusses the foundations of low-power electronics, including the challenges and demands and concepts such as subthreshold swing. The second part discusses the basic operations of negative capacitance field effect transistors (NCFETs) and tunnel field effect transistors (TFETs). The third part covers industrial applications including cryogenics and biosensors with NC-FET. This book is designed to be a one-stop guide for students and academic researchers, to understand recent trends in the IT industry and semiconductor industry. It will also be of interest to researchers in the field of nanodevices such as NC-FET, FinFET, tunnel FET, and device–circuit codesign.
Download or read book Electrical Characteristics of Transmission Circuits written by and published by . This book was released on 1922 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ESD Design Challenges and Strategies in Deeply scaled Integrated Circuits written by Shuqing Cao and published by Stanford University. This book was released on 2010 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is the main objective of this work to address the scaling and design challenges of ESD protection in deeply scaled technologies. First, the thesis introduces the on-chip ESD events, the scaling and design challenges, and the nomenclatures necessary for later chapters. The ESD design window and the I/O schematics for both rail clamping and local clamping ESD schemes are illustrated. Then, the thesis delves into the investigation of the input and output driver devices and examines their robustness under ESD. The input driver's oxide breakdown levels are evaluated in deeply scaled technologies. The output driver's trigger and breakdown voltages are improved appreciably by applying circuit and device design techniques. The ESD device sections first discuss rail-based clamping, a widely used protection scheme. Two diode-based devices, namely the gated diode and substrate diode, are investigated in detail with SOI test structures. Characterization is based on DC current-voltage (I-V), Very Fast Transmission Line Pulse (VF-TLP), capacitance, and leakage measurements. Improvements in performance are realized. Technology computer aided design (TCAD) simulations help understand the physical effects and design tradeoffs. Then, the following section focuses on the local clamping scheme. Two devices, the field-effect diode (FED) and the double-well FED (DWFED), are developed and optimized in an SOI technology. Trigger circuits are designed to improve the turn-on speed. The advantages of local clamping is highlighted and compared with the rail-based clamping. The results show that the FED is a suitable option for power clamping applications and the DWFED is most suitable for pad-based local clamping. The thesis presents an ESD protection design methodology, which takes advantage of the results and techniques from pervious chapters and put each element into a useful format. Based on the correlation of package level and in-lab test results, a design process based on CDM target definition and device optimization, discharge path analysis, parasitic minimization, I/O data rate estimation and finally ESD and performance characterization is used sequentially to systematically realize the overall design goals.
Download or read book Industrial Electricity written by Chester Laurens Dawes and published by . This book was released on 1924 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Report written by United States. National Advisory Committee for Aeronautics and published by . This book was released on with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:
