Download or read book Calculus Of Variations Homogenization And Continuum Mechanics written by Guy Bouchitte and published by World Scientific. This book was released on 1994-06-28 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of the workshop was to promote a better understanding of the connections between recent problems in Theoretical or Computational Mechanics (bounds in composites, phase transitions, microstructure of crystals, optimal design, nonlinear elasticity) and new mathematical tools in the Calculus of Variations (relaxation and Γ-convergence theory, Young and H-measures, compensated compactness and quasiconvexity).
Download or read book Calculus of Variations Homogenization and Continuum Mechanics written by Guy Bouchitté and published by . This book was released on 1994 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Variational Principles of Continuum Mechanics written by Victor Berdichevsky and published by Springer Science & Business Media. This book was released on 2009-09-18 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book reviews the two features of the variational approach: its use as a universal tool to describe physical phenomena and as a source for qualitative and quantitative methods of studying particular problems. Berdichevsky’s work differs from other books on the subject in focusing mostly on the physical origin of variational principles as well as establishing their interrelations. For example, the Gibbs principles appear as a consequence of the Einstein formula for thermodynamic fluctuations rather than as the first principles of the theory of thermodynamic equilibrium. Mathematical issues are considered as long as they shed light on the physical outcomes and/or provide a useful technique for the direct study of variational problems. In addition, a thorough account of variational principles discovered in various branches of continuum mechanics is given. This book, the second volume, describes how the variational approach can be applied to constructing models of continuum media, such as the theory of elastic plates; shells and beams; shallow water theory; heterogeneous mixtures; granular materials; and turbulence. It goes on to apply the variational approach to asymptotical analysis of problems with small parameters, such as the derivation of the theory of elastic plates, shells and beams from three-dimensional elasticity theory; and the basics of homogenization theory. A theory of stochastic variational problems is considered in detail too, along with applications to the homogenization of continua with random microstructures.
Download or read book Variational Methods for Discontinuous Structures written by Raul Serapioni and published by Birkhäuser. This book was released on 2012-12-06 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years many researchers in material science have focused their attention on the study of composite materials, equilibrium of crystals and crack distribution in continua subject to loads. At the same time several new issues in computer vision and image processing have been studied in depth. The understanding of many of these problems has made significant progress thanks to new methods developed in calculus of variations, geometric measure theory and partial differential equations. In particular, new technical tools have been introduced and successfully applied. For example, in order to describe the geometrical complexity of unknown patterns, a new class of problems in calculus of variations has been introduced together with a suitable functional setting: the free-discontinuity problems and the special BV and BH functions. The conference held at Villa Olmo on Lake Como in September 1994 spawned successful discussion of these topics among mathematicians, experts in computer science and material scientists.
Download or read book Calculus of Variations written by Charles R. MacCluer and published by Courier Corporation. This book was released on 2013-05-20 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: First truly up-to-date treatment offers a simple introduction to optimal control, linear-quadratic control design, and more. Broad perspective features numerous exercises, hints, outlines, and appendixes, including a practical discussion of MATLAB. 2005 edition.
Download or read book Modern Methods in the Calculus of Variations written by Irene Fonseca and published by Springer Science & Business Media. This book was released on 2007-08-22 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first of two books on methods and techniques in the calculus of variations. Contemporary arguments are used throughout the text to streamline and present in a unified way classical results, and to provide novel contributions at the forefront of the theory. This book addresses fundamental questions related to lower semicontinuity and relaxation of functionals within the unconstrained setting, mainly in L^p spaces. It prepares the ground for the second volume where the variational treatment of functionals involving fields and their derivatives will be undertaken within the framework of Sobolev spaces. This book is self-contained. All the statements are fully justified and proved, with the exception of basic results in measure theory, which may be found in any good textbook on the subject. It also contains several exercises. Therefore,it may be used both as a graduate textbook as well as a reference text for researchers in the field. Irene Fonseca is the Mellon College of Science Professor of Mathematics and is currently the Director of the Center for Nonlinear Analysis in the Department of Mathematical Sciences at Carnegie Mellon University. Her research interests lie in the areas of continuum mechanics, calculus of variations, geometric measure theory and partial differential equations. Giovanni Leoni is also a professor in the Department of Mathematical Sciences at Carnegie Mellon University. He focuses his research on calculus of variations, partial differential equations and geometric measure theory with special emphasis on applications to problems in continuum mechanics and in materials science.
Download or read book Discrete Variational Problems with Interfaces written by Roberto Alicandro and published by Cambridge University Press. This book was released on 2024-01-31 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: A systematic presentation of discrete-to-continuum results and methods, offering new perspectives on intrinsically discrete problems.
Download or read book Calculus of Variations written by I. M. Gelfand and published by Courier Corporation. This book was released on 2012-04-26 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fresh, lively text serves as a modern introduction to the subject, with applications to the mechanics of systems with a finite number of degrees of freedom. Ideal for math and physics students.
Download or read book The Calculus of Variations and Functional Analysis written by L. P. Lebedev and published by World Scientific. This book was released on 2003 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, Sam helps his goose sisters fly to safety to looking for familiar landforms.
Download or read book Unbounded Functionals in the Calculus of Variations written by Luciano Carbone and published by CRC Press. This book was released on 2019-06-13 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last few decades, research in elastic-plastic torsion theory, electrostatic screening, and rubber-like nonlinear elastomers has pointed the way to some interesting new classes of minimum problems for energy functionals of the calculus of variations. This advanced-level monograph addresses these issues by developing the framework of a gener
Download or read book IUTAM Symposium on Variational Concepts with Applications to the Mechanics of Materials written by Klaus Hackl and published by Springer Science & Business Media. This book was released on 2010-06-02 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Variational calculus has been the basis of a variety of powerful methods in the ?eld of mechanics of materials for a long time. Examples range from numerical schemes like the ?nite element method to the determination of effective material properties via homogenization and multiscale approaches. In recent years, however, a broad range of novel applications of variational concepts has been developed. This c- prises the modeling of the evolution of internal variables in inelastic materials as well as the initiation and development of material patterns and microstructures. The IUTAM Symposium on “Variational Concepts with Applications to the - chanics of Materials” took place at the Ruhr-University of Bochum, Germany, on September 22–26, 2008. The symposium was attended by 55 delegates from 10 countries. Altogether 31 lectures were presented. The objective of the symposium was to give an overview of the new dev- opments sketched above, to bring together leading experts in these ?elds, and to provide a forum for discussing recent advances and identifying open problems to work on in the future. The symposium focused on the developmentof new material models as well as the advancement of the corresponding computational techniques. Speci?c emphasis is put on the treatment of materials possessing an inherent - crostructure and thus exhibiting a behavior which fundamentally involves multiple scales. Among the topics addressed at the symposium were: 1. Energy-based modeling of material microstructures via envelopes of n- quasiconvex potentials and applications to plastic behavior and pha- transformations.
Download or read book Calculus Of Variations And Functional Analysis The With Optimal Control And Applications In Mechanics written by Leonid P Lebedev and published by World Scientific. This book was released on 2003-12-23 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a book for those who want to understand the main ideas in the theory of optimal problems. It provides a good introduction to classical topics (under the heading of “the calculus of variations”) and more modern topics (under the heading of “optimal control”). It employs the language and terminology of functional analysis to discuss and justify the setup of problems that are of great importance in applications. The book is concise and self-contained, and should be suitable for readers with a standard undergraduate background in engineering mathematics.
Download or read book A First Course in the Calculus of Variations written by Mark Kot and published by American Mathematical Society. This book was released on 2014-10-06 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended for a first course in the calculus of variations, at the senior or beginning graduate level. The reader will learn methods for finding functions that maximize or minimize integrals. The text lays out important necessary and sufficient conditions for extrema in historical order, and it illustrates these conditions with numerous worked-out examples from mechanics, optics, geometry, and other fields. The exposition starts with simple integrals containing a single independent variable, a single dependent variable, and a single derivative, subject to weak variations, but steadily moves on to more advanced topics, including multivariate problems, constrained extrema, homogeneous problems, problems with variable endpoints, broken extremals, strong variations, and sufficiency conditions. Numerous line drawings clarify the mathematics. Each chapter ends with recommended readings that introduce the student to the relevant scientific literature and with exercises that consolidate understanding.
Download or read book Introduction To The Fractional Calculus Of Variations written by Delfim F M Torres and published by World Scientific Publishing Company. This book was released on 2012-09-14 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This invaluable book provides a broad introduction to the fascinating and beautiful subject of Fractional Calculus of Variations (FCV). In 1996, FVC evolved in order to better describe non-conservative systems in mechanics. The inclusion of non-conservatism is extremely important from the point of view of applications. Forces that do not store energy are always present in real systems. They remove energy from the systems and, as a consequence, Noether's conservation laws cease to be valid. However, it is still possible to obtain the validity of Noether's principle using FCV. The new theory provides a more realistic approach to physics, allowing us to consider non-conservative systems in a natural way. The authors prove the necessary Euler-Lagrange conditions and corresponding Noether theorems for several types of fractional variational problems, with and without constraints, using Lagrangian and Hamiltonian formalisms. Sufficient optimality conditions are also obtained under convexity, and Leitmann's direct method is discussed within the framework of FCV.The book is self-contained and unified in presentation. It may be used as an advanced textbook by graduate students and ambitious undergraduates in mathematics and mechanics. It provides an opportunity for an introduction to FCV for experienced researchers. The explanations in the book are detailed, in order to capture the interest of the curious reader, and the book provides the necessary background material required to go further into the subject and explore the rich research literature./a
Download or read book Calculus of Variations written by Robert Weinstock and published by Courier Corporation. This book was released on 2012-04-26 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book by Robert Weinstock was written to fill the need for a basic introduction to the calculus of variations. Simply and easily written, with an emphasis on the applications of this calculus, it has long been a standard reference of physicists, engineers, and applied mathematicians. The author begins slowly, introducing the reader to the calculus of variations, and supplying lists of essential formulae and derivations. Later chapters cover isoperimetric problems, geometrical optics, Fermat's principle, dynamics of particles, the Sturm-Liouville eigenvalue-eigenfunction problem, the theory of elasticity, quantum mechanics, and electrostatics. Each chapter ends with a series of exercises which should prove very useful in determining whether the material in that chapter has been thoroughly grasped. The clarity of exposition makes this book easily accessible to anyone who has mastered first-year calculus with some exposure to ordinary differential equations. Physicists and engineers who find variational methods evasive at times will find this book particularly helpful. "I regard this as a very useful book which I shall refer to frequently in the future." J. L. Synge, Bulletin of the American Mathematical Society.
Download or read book Introduction To The Calculus of Variations And Its Applications written by Frederic Wan and published by Routledge. This book was released on 2017-10-19 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive text provides all information necessary for an introductory course on the calculus of variations and optimal control theory. Following a thorough discussion of the basic problem, including sufficient conditions for optimality, the theory and techniques are extended to problems with a free end point, a free boundary, auxiliary and inequality constraints, leading to a study of optimal control theory.
Download or read book Variational Methods for Discontinuous Structures written by Gianni Dal Maso and published by Birkhäuser. This book was released on 2012-12-06 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the Proceedings of the International Workshop Variational Methods For Discontinuous Structures, which was jointly organized by the Dipar timento di Matematica Francesco Brioschi of Milano Politecnico and the Interna tional School for Advanced Studies (SISSA) of Trieste. The Conference took place at Villa Erba Antica (Cernobbio) on the Lago di Como on July 4- 6, 2001. In past years the calculus of variations faced mainly the study of continuous structures, say particularly problems with smooth solutions. One of the deepest and more delicate problems was the regularity of weak solutions. More recently, new sophisticated tools have been introduced in order to study discontinuities: in many variational problems solutions develop singularities, and sometimes the most interesting part of a solution is the singularity itself. The conference intended to focus on recent developments in this direction. Some of the talks were devoted to differential or variational modelling of image segmentation, occlusion and textures synthesizing in image analysis, varia tional description of micro-magnetic materials, dimension reduction and structured deformations in elasticity and plasticity, phase transitions, irrigation and drainage, evolution of crystalline shapes; in most cases theoretical and numerical analysis of these models were provided. viii Preface Other talks were dedicated to specific problems of the calculus of variations: variational theory of weak or lower-dimensional structures, optimal transport prob lems with free Dirichlet regions, higher order variational problems, symmetrization in the BV framework.
